This provides an implementation of the virDomainOpenConsole
API for the remote driver client and server.
* daemon/remote.c: Server side impl
* src/remote/remote_driver.c: Client impl
* src/remote/remote_protocol.x: Wire definition
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
The current remote driver code for streams only supports
blocking I/O mode. This is fine for the usage with migration
but is a problem for more general use cases, in particular
bi-directional streams.
This adds supported for the stream callbacks and non-blocking
I/O. with the minor caveat is that it doesn't actually do
non-blocking I/O for sending stream data, only receiving it.
A future patch will try to do non-blocking sends, but this is
quite tricky to get right.
* src/remote/remote_driver.c: Allow non-blocking I/O for
streams and support callbacks
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
The remoteIO() method has wierd calling conventions, where
it is passed a pre-allocated 'struct remote_call *' but
then free()s it itself, instead of letting the caller free().
This fixes those weird semantics
* src/remote/remote_driver.c: Sanitize semantics of remoteIO
method wrt to memory release
The addrToString functionality is now available via the
virSocketFormatAddrFull method.
* daemon/remote.c, src/remote/remote_driver.c: Remove
addrToString methods
If getnameinfo() with NI_NUMERICHOST set fails, there are no
grounds to expect inet_ntop to succeed, since these calls
are functionally equivalent. Remove useless inet_ntop code
in the getnameinfo() error path.
* daemon/remote.c, src/remote/remote_driver.c: Remove
calls to inet_ntop
'make -C src rpcgen' is supposed to be idempotent. But commit
f928f43b7b mistakently manually edited a generated file rather
than fixing the upstream file.
* src/remote/remote_protocol.x (remote_memory_param_value): Use
correct spelling of enum values.
* src/remote/remote_protocol.c: Regenerate.
Public api to set/get memory tunables supported by the hypervisors.
dv:
* some cleanups in libvirt.c
* adding extra checks in libvirt.c new entry points
v4:
* Move exporting public API to this patch
* Add unsigned int flags to the public api for future extensions
v3:
* Add domainGetMemoryParamters and NULL in all the driver interface
v2:
* Initialize domainSetMemoryParameters to NULL in all the driver
interface structure.
The addrToString methods were not coping with UNIX domain sockets
which have no normal host+port address. Hardcode special handling
for these so that SASL routines can work over UNIX sockets. Also
fix up SSF logic in remote client so that it presumes that a UNIX
socket is secure
* daemon/remote.c: Fix addrToString for UNIX sockets.
* src/remote/remote_driver.c: Fix addrToString for UNIX sockets
and fix SSF logic to work for TLS + UNIX sockets in the same
manner
NodeDeviceCreateXML and NodeDeviceDestroy methods added for NPIV were
using the wrong privateData field for the remote driver. This doesn't
impact KVM, since the remote driver handles everything, thus
privateData == devMonPrivateData. It does impact Xen though, because
the remote driver only handles a subset of methods and thus
privateData != devMonPrivateData.
Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number. This allows us to easily
distinguish it from the normal REMOTE protocol.
This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).
Changes since v1:
- Fixed up a couple of script problems in remote_generate_stubs.pl
- Switch an int flag to a bool in dispatch.c
Changes since v2:
- None
Changes since v3:
- Change unsigned proc to signed proc, to conform to spec
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The remote driver is using the wrong privateData field in
a couple of functions. THis is harmless for stateful
drivers like QEMU/UML/LXC, but will crash with Xen
* src/remote/remote_driver.c: Fix use of privateData field
Define the wire format for the new virDomainCreateWithFlags
API, and implement client and server side of marshaling code.
* daemon/remote.c (remoteDispatchDomainCreateWithFlags): Add
server side dispatch for virDomainCreateWithFlags.
* src/remote/remote_driver.c (remoteDomainCreateWithFlags)
(remote_driver): Client side serialization.
* src/remote/remote_protocol.x
(remote_domain_create_with_flags_args)
(remote_domain_create_with_flags_ret)
(REMOTE_PROC_DOMAIN_CREATE_WITH_FLAGS): Define wire format.
* daemon/remote_dispatch_args.h: Regenerate.
* daemon/remote_dispatch_prototypes.h: Likewise.
* daemon/remote_dispatch_table.h: Likewise.
* src/remote/remote_protocol.c: Likewise.
* src/remote/remote_protocol.h: Likewise.
* src/remote_protocol-structs: Likewise.
First calling REMOTE_PROC_CLOSE and then removing watches might lead to
a hang as HANGUP event can be triggered before the watches are actually
removed but after virConnectPtr is already freed. As a result of that
remoteDomainEventFired() would try to lock uninitialized mutex, which
would hang for ever.
Allow debugging of GNUTLS interactions by setting
LIBVIRT_GNUTLS_DEBUG=10 LIBVIRT_DEBUG=1 virsh
* src/remote/remote_driver.c: Use LIBVIRT_GNUTLS_DEBUG to
enable gnutls debugging
Change 965466c1 added a new field to struct remote_error, which broke
the RPC protocol. Fortunately the new field is unused, so this change
simply removes it again.
* src/remote/remote_protocol.(c|h|x): Remove remote_nwfilter from struct
remote_error
Gnulib can guarantee that pthread.h exists, but for now, it is a dummy
header with no support for most pthread_* functions. Modify our
use of pthread to use function checks, rather than header checks,
to determine how much pthread support is present.
* bootstrap.conf (gnulib_modules): Add pthread.
* configure.ac: Drop all pthread.h checks. Optimize function
checks. Add check for pthread functions.
* src/Makefile.am (libvirt_lxc_LDADD): Ensure proper link.
* src/remote/remote_driver.c (remoteIOEventLoop): Depend on
pthread_sigmask, now that gnulib guarantees pthread.h.
* src/util/util.c (virFork): Likewise.
* src/util/threads.c (threads-pthread.c): Depend on
pthread_mutexattr_init, as a witness of full pthread support.
* src/util/threads.h (threads-pthread.h): Likewise.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
const char *reason,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
* daemon/remote.c: Server side dispatcher
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h: Update
with new API
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/remote_protocol.c, src/remote/remote_protocol.h: Update
* src/remote/remote_protocol.x: Define new wire protocol
This defines the internal driver API and stubs out each driver
* src/driver.h: Define virDrvDomainGetBlockInfo signature
* src/libvirt.c, src/libvirt_public.syms: Glue public API to drivers
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub out driver
Cygwin's XDR implementation defines xdr_u_int64_t instead of
xdr_uint64_t and lacks IXDR_PUT_INT32/IXDR_GET_INT32.
Alter the IXDR_GET_LONG regex in rpcgen_fix.pl so it doesn't destroy
the #define IXDR_GET_INT32 IXDR_GET_LONG in remote_protocol.x.
Also fix the remote_protocol.h regex in rpcgen_fix.pl.
The user probably doesn't care what the gai error numbers are, as
much as what the failed conversion IP address was.
* src/remote/remote_driver.c (addrToString): Mention which address
could not be converted.
* daemon/remote.c (addrToString): Likewise.
According to GCC, ATTRIBUTE_UNUSED means that an attribute _might_
be unused, not _must_ be unused. Therefore, it is easier to
blindly mark a variable, than to try and do preprocessor limiting
of when we know it is unused.
* src/remote/remote_driver.c (remoteAuthenticate): Mark attribute
as potentially unused.
Reported by Gustovo Morozowski.
Based on a warning from coverity. The safe* functions
guarantee complete transactions on success, but don't guarantee
freedom from failure.
* src/util/util.h (saferead, safewrite, safezero): Add
ATTRIBUTE_RETURN_CHECK.
* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Ignore
some failures.
(remoteIOReadBuffer): Adjust error messages on read failure.
* daemon/event.c (virEventHandleWakeup): Ignore read failure.
git grep found 12 of the former but 100 of the latter in src/.
* src/remote/remote_driver.c (initialise_gnutls): Rename...
(initialize_gnutls): ...to this.
(doRemoteOpen): Adjust caller.
* src/xen/xen_driver.c (xenUnifiedOpen): Adjust output string.
* src/util/network.c: Adjust comments.
Suggested by Matthias Bolte.
* src/remote/remote_protocol.x src/remote/remote_protocol.h
src/remote/remote_protocol.c src/remote/remote_driver.c: add the entry
points in the remote driver
* daemon/remote.c daemon/remote_dispatch_args.h
daemon/remote_dispatch_prototypes.h daemon/remote_dispatch_table.h:
and implement the daemon counterpart
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
This patch adds the definition of the wire format for RPC calls
and implementation of the RPC client & server code
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This defines the wire format for the new virDomainUpdateDeviceFlags()
API, and implements the server & client side of the marshalling code.
* daemon/remote.c: Server side dispatch for virDomainUpdateDeviceFlags
* src/remote/remote_driver.c: Client side serialization for
virDomainUpdateDeviceFlags
* src/remote/remote_protocol.x: Define wire format for
virDomainUpdateDeviceFlags
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
daemon/remote_dispatch_table.h, src/remote/remote_protocol.c,
src/remote/remote_protocol.h: Re-generate code
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
To avoid confusion, rename the current REMOTE_PROC_DOMAIN_EVENT
message to REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE. This does not
cause ABI problems, since the names are only relevant at the source
code level. On the wire they encoding is a plain integer whose
value does not change
* src/remote/remote_protocol.x: Rename REMOTE_PROC_DOMAIN_EVENT
to REMOTE_PROC_DOMAIN_EVENT_LIFECYCLE.
* daemon/remote.c, src/remote/remote_driver.c: Update code for
renamed event
This wires up the remote driver to handle the new events APIs.
The public API allows an application to request a callback filters
events to a specific domain object, and register multiple callbacks
for the same event type. On the wire there are two strategies for
this
- Register multiple callbacks with the remote daemon, each
with filtering as needed
- Register only one callback per event type, with no filtering
Both approaches have potential inefficiency. In the first scheme,
the same event gets sent over the wire many times if multiple
callbacks are registered. With the second scheme, unneccessary
events get sent over the wire if a per-domain filter is set on
the client. The second scheme is far easier to implement though,
so this patch takes that approach.
* daemon/dispatch.h: Don't export remoteRelayDomainEvent since it
is no longer needed for unregistering callbacks, instead the
unique callback ID is used
* daemon/libvirtd.c, daemon/libvirtd.h: Track and unregister
callbacks based on callback ID, instead of function pointer
* daemon/remote.c: Switch over to using virConnectDomainEventRegisterAny
instead of legacy virConnectDomainEventRegister function. Refactor
remoteDispatchDomainEventSend() to cope with arbitrary event types
* src/driver.h, src/driver.c: Move verify() call into source file
instead of header, to avoid polluting the global namespace with
the verify function name
* src/remote/remote_driver.c: Implement new APIs for event
registration. Refactor processCallDispatchMessage() to cope
with arbitrary incoming event types. Merge remoteDomainQueueEvent()
into processCallDispatchMessage() to avoid duplication of code.
Rename remoteDomainReadEvent() to remoteDomainReadEventLifecycle()
* src/remote/remote_protocol.x: Define wire format for the new
virConnectDomainEventRegisterAny and virConnectDomainEventDeregisterAny
functions
The internal domain events APIs are designed to handle the lifecycle
events. This needs to be refactored to allow arbitrary new event
types to be handled.
* The signature of virDomainEventDispatchFunc changes to use
virConnectDomainEventGenericCallback instead of the lifecycle
event specific virConnectDomainEventCallback
* Every registered callback gains a unique ID to allow its
removal based on ID, instead of function pointer
* Every registered callback gains an 'eventID' to allow callbacks
for different types of events to be distinguished
* virDomainEventDispatch is adapted to filter out callbacks
whose eventID does not match the eventID of the event being
dispatched
* virDomainEventDispatch is adapted to filter based on the
domain name and uuid, if this filter is set for a callback.
* virDomainEvent type/detail fields are moved into a union to
allow different data fields for other types of events to be
added later
* src/conf/domain_event.h, src/conf/domain_event.c: Refactor
to allow handling of different types of events
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/xen/xen_driver.c: Change dispatch function signature
to use virConnectDomainEventGenericCallback
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
This defines the wire protocol for the new API
* src/remote/remote_protocol.x: Wire protocol definition
* src/remote/remote_driver.c,daemon/remote.c: Client and server
side implementation
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h,
daemon/remote_dispatch_table.h, src/remote/remote_protocol.c,
src/remote/remote_protocol.h: Re-generate from remote_protocol.x
This provides the internal glue for the driver API
* src/driver.h: Internal API contract
* src/libvirt.c, src/libvirt_public.syms: Connect public API
to driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out entry points
* src/remote/remote_protocol.x: Define wire protocol format
for virDomainGetJobInfo API
* src/remote/remote_driver.c, daemon/remote.c: Implement client
and server marshalling code for virDomainGetJobInfo()
* daemon/remote_dispatch_args.h, daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h, daemon/remote_dispatch_table.h,
src/remote/remote_protocol.c, src/remote/remote_protocol.h: Rebuild
files from src/remote/remote_protocol.x
The internal glue layer for the new pubic API
* src/driver.h: Define internal driver API contract
* src/libvirt.c, src/libvirt_public.syms: Wire up public
API to internal driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub new entry point
In bug 567931 we found that virt-top would exit occasionally
when the terminal window was resized. Tracking this down it
turned out that SIGWINCH was being delivered to the process at
exactly the point where the libvirt remote driver was calling
poll(2) waiting for a reply from libvirtd.
This caused the poll(2) call to be interrupted (returning errno
EINTR). However handling EINTR the same way as EAGAIN was not
the solution to this problem since we found previously that this
would break Ctrl-C handling (commit 47fec8eac2).
The correct solution is to mask out SIGWINCH for the duration
of the poll(2) system call. The per-thread mask is changed and
restored immediately after the call. Since we are using
pthread_sigmask, this should not affect other threads, and
since we restore the signal mask immediately afterwards it should
not affect the current thread visibly either. Other possibly
problematic signals are SIGCHLD and SIGPIPE and these are
masked too.
Note use of ignore_value: It's not fatal if we cannot mask out
SIGWINCH, and in any case pthread_sigmask never fails on Linux
as long as you supply the correct arguments.
I tested this patch and it cures the original problem with
virt-top.
If using a remote access, sometimes an RPC entry point is not
available, and currently we just end up with a raw:
error: unknown procedure: xxx
error, while this should be more cleanly reported as an unsupported
entry point like for local access
* src/remote/remote_driver.c: convert missing remote entry points into
the unsupported feature error
Found while trying to cross-compile libvirt on Fedora 12 for Windows.
gnulib redefines 'close' to 'close_used_without_including_unistd_h'
in sys/socket.h if winsock2.h is present and unistd.h has not been
included before sys/socket.h. Reorder some includes to fix this.
The code for connecting to a server tries each socket in turn
until it finds one that connects. Unfortunately for TLS sockets
if it connected, but failed TLS handshake it would treat that
as a failure to connect, and try the next socket. This is bad,
it should have reported the TLS failure immediately.
$ virsh -c qemu://somehost.com/system
error: unable to connect to libvirtd at 'somehost.com': Invalid argument
error: failed to connect to the hypervisor
$ ./tools/virsh -c qemu://somehost.com/system
error: server certificate failed validation: The certificate hasn't got a known issuer.
error: failed to connect to the hypervisor
* src/remote/remote_driver.c: Stop trying to connect if the
TLS handshake fails
Use a dynamically sized xdr_array to pass memory stats on the wire. This
supports the addition of future memory stats and reduces the message size
since only supported statistics are returned.
* src/remote/remote_protocol.x: provide defines for the new entry point
* src/remote/remote_driver.c daemon/remote.c: implement the client and
server side
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: generated
stubs
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
* src/remote/remote_protocol.x: update with new entry point
* daemon/remote.c: add the new server dispatcher
* daemon/remote_dispatch_args.h daemon/remote_dispatch_prototypes.h
daemon/remote_dispatch_ret.h daemon/remote_dispatch_table.h
src/remote/remote_protocol.c src/remote/remote_protocol.h: regenerated
* src/driver.h: add an extra entry point in the structure
* src/esx/esx_driver.c src/lxc/lxc_driver.c src/opennebula/one_driver.c
src/openvz/openvz_driver.c src/phyp/phyp_driver.c src/qemu/qemu_driver.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xen_driver.c: add NULL entry points for
all drivers
Replace free(virBufferContentAndReset()) with virBufferFreeAndReset().
Update documentation and replace all remaining calls to free() with
calls to VIR_FREE(). Also add missing calls to virBufferFreeAndReset()
and virReportOOMError() in OOM error cases.
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
* src/libvirt.c src/lxc/lxc_conf.c src/lxc/lxc_container.c
src/lxc/lxc_controller.c src/node_device/node_device_hal.c
src/openvz/openvz_conf.c src/qemu/qemu_driver.c
src/qemu/qemu_monitor_text.c src/remote/remote_driver.c
src/storage/storage_backend_disk.c src/storage/storage_driver.c
src/util/logging.c src/xen/sexpr.c src/xen/xend_internal.c
src/xen/xm_internal.c: Steve Grubb <sgrubb@redhat.com> sent a code
review and those are the fixes correcting the problems
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
John Levon raised the issue that remoteIOEventLoop() poll call was
reissued after EINTR was caught making it uninterruptible.
* src/remote/remote_driver.c: catch EAGAIN instead as suggested by
Richard Jones
$ sudo virsh pool-start idontexist
10:58:18.716: warning : processCallDispatchReply:7612 : Method call error
error: failed to get pool 'idontexist'
error: Storage pool not found: no pool with matching name 'idontexist'
That warning doesn't server much purpose being printed via a virsh call. So
remove the message.
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.
* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
creating new streams, associating streams with clients, finding
existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
for the 'enum remote_message_type' for encoding stream data
in wire messages. Add a new 'REMOTE_CONTINUE' constant to
'enum remote_message_status' to indicate further data stream
messsages are expected to follow. Document how the
remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
sent to client is always type=REMOTE_REPLY. It may now
also be type=REMOTE_STREAM. Add convenient method for
sending outgoing stream data packets. Log and ignore
non-filtered incoming stream packets. Add a method for
serializing a stream error message
* daemon/dispatch.h: Add API for serializing stream errors
and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
active data streams for clients. Tweak filter function
operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
which have been fully transmitted into separate method.
Release all active streams when client shuts down. Change
filter function to be responsible for queueing the message
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/
* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
