While this update doesn't address any reported problems in libvirt,
doing a post-release update to latest gnulib makes it easier to
stay in sync with best upstream practices.
* .gnulib: Update to latest.
* bootstrap: Resynchronize.
Commit 9a3ff01d7f (which was ACKed at
the end of January, but for some reason didn't get pushed until during
the 1.0.4 freeze) fixed the logic in virPCIGetVirtualFunctions().
Unfortunately, a typo in the fix (replacing VIR_REALLOC_N with
VIR_ALLOC_N during code movement) caused not only a memory leak, but
also resulted in most of the elements of the result array being
replaced with NULL. virNetDevGetVirtualFunctions() assumed (and I think
rightly so) that virPCIGetVirtualFunctions() wouldn't return any NULL
elements in the array, so it ended up segfaulting.
This was found when attempting to use a virtual network with an
auto-created pool of SRIOV VFs, e.g.:
<forward mode='hostdev' managed='yes'>
<pf dev='eth4'/>
</forward>
(the pool of PCI addresses is discovered by calling
virNetDevGetVirtualFunctions() on the PF dev).
The definiton of scsi adapter in storagespool.rng (sourceinfoadapter)
can be used by scsi hostdev in later patch. Move it to basictypes.rng.
PortNumber is defined in both domaincommon.rng and storagespool.rng,
simplify it by moving it to basictypes.rng.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
The helper function to look up disk controller model may be used by scsi
hostdev. But it should be changed to use device info.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Even though http://libvirt.org/formatdomain.html#elementsMetadata
states that it requires RFC4122 compliance UUIDs that are generated
by virUUIDGenerate() are not. Following patch modifies generated
UUIDs to conform to rules described in RFC.
Signed-off-by: Milos Vyletel <milos.vyletel@sde.cz>
If the user requests a mount for /run, this may hide any existing
mounts that are lower down in /run. The result is that the
container still sees the mounts in /proc/mounts, but cannot
access them
sh-4.2# df
df: '/run/user/501/gvfs': No such file or directory
df: '/run/media/berrange/LIVE': No such file or directory
df: '/run/media/berrange/SecureDiskA1': No such file or directory
df: '/run/libvirt/lxc/sandbox': No such file or directory
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_t500wlan-lv_root 151476396 135390200 8384900 95% /
tmpfs 1970888 3204 1967684 1% /run
/dev/sda1 194241 155940 28061 85% /boot
devfs 64 0 64 0% /dev
tmpfs 64 0 64 0% /sys/fs/cgroup
tmpfs 1970888 1200 1969688 1% /etc/libvirt-sandbox/scratch
Before mounting any filesystem at a particular location, we
must recursively unmount anything at or below the target mount
point
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure lxcContainerUnmountSubtree is at the top of the
lxc_container.c file so it is easily referenced from
any other method. No functional change
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This allows a container-type domain to have exclusive access to one of
the host's NICs.
Wire <hostdev caps=net> with the lxc_controller - when moving the newly
created veth devices into a new namespace, also look for any hostdev
devices that should be moved. Note: once the container domain has been
destroyed, there is no code that moves the interfaces back to the
original namespace. This does happen, though, probably due to default
cleanup on namespace destruction.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
This updates the definitions and supporting structures in the XML
schema and domain configuration files.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
Since commit b8a32e0e94, all man pages
depend on configure.ac so that they are properly regenerated whenever
libvirt version changes. Thus libvirt.spec needs to have a build
dependency on pod2man when %{enable_autotools} is set.
The virCgroupMounted method is badly named, since a controller can be
mounted, but disabled in the current object. Rename the method to be
virCgroupHasController. Also make it tolerant to a NULL virCgroupPtr
and out-of-range controller index, to avoid duplication of these
checks in all callers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To support "shareable" for volume type disk, we have to translate
the source before trying to add the shared disk entry. To achieve
the goal, this moves the helper qemuTranslateDiskSourcePool into
src/qemu/qemu_conf.c, and introduce an internal only member (voltype)
for struct _virDomainDiskSourcePoolDef, to record the underlying
volume type for use when building the drive string.
Later patch will support "shareable" volume type disk.
This adds a new helper qemuTranslateDiskSourcePool which uses the
storage pool/vol APIs to translate the disk source before building
the drive string. Network volume is not supported yet. Disk chain
for volume type disk may be supported later, but before I'm confident
it doesn't break anything, it's just disabled now.
With this patch, one can specify the disk source using libvirt
storage like:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source pool='default' volume='fc18.img'/>
<target dev='vdb' bus='virtio'/>
</disk>
"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.
docs/formatdomain.html.in:
* Add documents for new XMLs
docs/schemas/domaincommon.rng:
* Add rng for new XMLs;
src/conf/domain_conf.h:
* New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
* Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
* New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
type disk source.
* New helper virDomainDiskSourcePoolDefFree to free the source def
if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
* New test
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
startPool creates the vHBA if it's not existed yet, stopPool destroys
the vHBA. Also to support autostart, checkPool will creates the vHBA
if it's not existed yet.
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
node device driver names the HBA like "scsi_host5", but storage
driver uses "host5", which could make the user confused. This
changes them to be consistent. However, for back-compat reason,
adapter name like "host5" is still supported.
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
To avoid
virportallocatortest.c: In function 'bind':
virportallocatortest.c:34:33: warning: cast increases required alignment of target type [-Wcast-align]
struct sockaddr_in *saddr = (struct sockaddr_in *)addr;
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are a number of places which generate cast alignment
warnings, which are difficult or impossible to address. Use
pragmas to disable the warnings in these few places
conf/nwfilter_conf.c: In function 'virNWFilterRuleDetailsParse':
conf/nwfilter_conf.c:1806:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)nwf + att[idx].dataIdx);
conf/nwfilter_conf.c: In function 'virNWFilterRuleDefDetailsFormat':
conf/nwfilter_conf.c:3238:16: warning: cast increases required alignment of target type [-Wcast-align]
item = (nwItemDesc *)((char *)def + att[i].dataIdx);
storage/storage_backend_mpath.c: In function 'virStorageBackendCreateVols':
storage/storage_backend_mpath.c:247:17: warning: cast increases required alignment of target type [-Wcast-align]
names = (struct dm_names *)(((char *)names) + next);
nwfilter/nwfilter_dhcpsnoop.c: In function 'virNWFilterSnoopDHCPDecode':
nwfilter/nwfilter_dhcpsnoop.c:994:15: warning: cast increases required alignment of target type [-Wcast-align]
pip = (struct iphdr *) pep->eh_data;
nwfilter/nwfilter_dhcpsnoop.c:1004:11: warning: cast increases required alignment of target type [-Wcast-align]
pup = (struct udphdr *) ((char *) pip + (pip->ihl << 2));
nwfilter/nwfilter_learnipaddr.c: In function 'procDHCPOpts':
nwfilter/nwfilter_learnipaddr.c:327:33: warning: cast increases required alignment of target type [-Wcast-align]
uint32_t *tmp = (uint32_t *)&dhcpopt->value;
nwfilter/nwfilter_learnipaddr.c: In function 'learnIPAddressThread':
nwfilter/nwfilter_learnipaddr.c:501:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:538:43: warning: cast increases required alignment of target type [-Wcast-align]
struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:544:48: warning: cast increases required alignment of target type [-Wcast-align]
struct udphdr *udphdr= (struct udphdr *)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When reading the inotify FD, we get back a sequence of
struct inotify_event, each with variable length data following.
It is not safe to simply cast from the char *buf to the
struct inotify_event struct since this may violate data
alignment rules. Thus we must copy from the char *buf
into the struct inotify_event instance before accessing
the data.
uml/uml_driver.c: In function 'umlInotifyEvent':
uml/uml_driver.c:327:13: warning: cast increases required alignment of target type [-Wcast-align]
e = (struct inotify_event *)tmp;
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current way virObject instances are allocated using
VIR_ALLOC_N causes alignment warnings
util/virobject.c: In function 'virObjectNew':
util/virobject.c:195:11: error: cast increases required alignment of target type [-Werror=cast-align]
Changing to use VIR_ALLOC_VAR will avoid the need todo
the casts entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNetlinkCommand() method takes an 'unsigned char **'
parameter to be filled with the received netlink message.
The callers then immediately cast this to 'struct nlmsghdr',
triggering (bogus) warnings about increasing alignment
requirements
util/virnetdev.c: In function 'virNetDevLinkDump':
util/virnetdev.c:1300:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)*recvbuf;
^
util/virnetdev.c: In function 'virNetDevSetVfConfig':
util/virnetdev.c:1429:12: warning: cast increases required alignment of target type [-Wcast-align]
resp = (struct nlmsghdr *)recvbuf;
Since all callers cast to 'struct nlmsghdr' we can avoid
the warning problem entirely by simply changing the
signature of virNetlinkCommand to return a 'struct nlmsghdr **'
instead of 'unsigned char **'. The way we do the cast inside
virNetlinkCommand does not have any alignment issues.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Playing games with field offsets in a struct causes all sorts
of alignment warnings on ARM platforms
util/virkeycode.c: In function '__virKeycodeValueFromString':
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:91:28: note: in expansion of macro 'getfield'
const char *name = getfield(virKeycodes + i, const char *, name_offset);
^
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:94:20: note: in expansion of macro 'getfield'
return getfield(virKeycodes + i, unsigned short, code_offset);
^
util/virkeycode.c: In function '__virKeycodeValueTranslate':
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:127:13: note: in expansion of macro 'getfield'
if (getfield(virKeycodes + i, unsigned short, from_offset) == key_value)
^
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
(*(typeof(field_type) *)((char *)(object) + field_offset))
^
util/virkeycode.c:128:20: note: in expansion of macro 'getfield'
return getfield(virKeycodes + i, unsigned short, to_offset);
There is no compelling reason to use a struct for the keycode
tables. It can easily just use an array of arrays instead,
avoiding all alignment problems
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For both "live" and "config" changes of vcpupin and emulatorpin, an
all clear bitmap doesn't make sense, and it can just cause corruptions.
E.g (similar for emulatorpin).
% virsh vcpupin hame 0 8,^8 --config
% virsh vcpupin hame
VCPU: CPU Affinity
----------------------------------
0:
1: 0-63
2: 0-63
3: 0-63
% virsh dumpxml hame | grep cpuset
<vcpupin vcpu='0' cpuset=''/>
% virsh start hame
error: Failed to start domain hame
error: An error occurred, but the cause is unknown
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
By default, libtool builds two .o files for every .lo rule:
src/foo.o - static builds
src/.libs/foo.o - shared library builds
But since commit ad42b34b disabled static builds, src/foo.o is
no longer built by default. On a fresh checkout, this means our
protocol check rules using pdwtags were testing a missing file,
and thanks to a lousy behavior of pdwtags happily giving no output
and 0 exit status (http://bugzilla.redhat.com/949034), we were
merely claiming that "dwarves is too old" and skipping the test.
However, if you swap between branches and do incremental builds,
such as building v0.10.2-maint and then switching back to master,
you end up with src/foo.o being leftover from its 0.10.2 state,
and then 'make check' fails because the .o file does not match
the protocol-structs file due to API additions in the meantime.
A simpler fix would be to always look in .libs for the .o to
be parsed; but since it is possible to pass ./configure options
to tell libtool to do a static-only build with no shared .o,
I went with the approach of finding the newest of the two files,
whenever both exist.
* src/Makefile.am (PDWTAGS): Ensure we test just-built file.
Newer pod (hello rawhide) complains if you attempt to mix bullets
and non-bullets in the same list:
virsh.pod around line 3177: Expected text after =item, not a bullet
As our intent was to nest an inner list, we make that explicit to
keep pod happy.
* tools/virsh.pod (ENVIRONMENT): Use correct pod syntax.
When setting processor count for a domain using the API libvirt enforced
a maximum processor count, while it isn't enforced when taking the XML path.
This patch removes the check to match the XML.
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.
Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Split the "resource" define out into multiple smaller
defines, one for each type of resource tuning parameter.
This makes the schema a bit clearer to read
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
