If a user specifies the pool explicitly, we should make sure to point
out that it's inactive instead of falling back to lookup by key/path and
failing at the end. Also if the pool isn't found there's no use in
continuing the lookup.
This changes the error in case the user-selected pool is inactive from:
$ virsh vol-upload --pool inactivepool --vol somevolname volcontents
error: failed to get vol 'somevolname'
error: Storage volume not found: no storage vol with matching path
somevolname
To a more descriptive:
$ virsh vol-upload --pool inactivepool --vol somevolname volcontents
error: pool 'inactivepool' is not active
And in case a user specifies an invalid pool from:
$ virsh vol-upload --pool invalidpool --vol somevolname volcontents
error: failed to get pool 'invalidpool'
error: failed to get vol 'somevolname', specifying --pool might help
error: Storage volume not found: no storage vol with matching path somevolname
To something less confusing:
$ virsh vol-upload --pool invalidpool --vol somevolname volcontents
error: failed to get pool 'invalidpool'
error: Storage pool not found: no storage pool with matching name 'invalidpool'
I noticed this while shortening switch statements via VIR_ENUM.
Basically, the only ways virAsprintf can fail are if we pass a
bogus format string (but we're not THAT bad) or if we run out
of memory (but it already warns on our behalf in that case).
Throw away the cruft that tries too hard to diagnose a printf
failure.
* tools/virsh-volume.c (cmdVolList): Simplify.
* tools/virsh-pool.c (cmdPoolList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Dan Berrange suggested that using VIR_ENUM_IMPL is more compact
than open-coding switch statements, and still just as forceful
at making us remember to update lists if we add enum values
in the future. Make this change throughout virsh.
Sure enough, doing this change caught that we missed at least
VIR_STORAGE_VOL_NETDIR.
* tools/virsh-domain-monitor.c (vshDomainIOErrorToString)
(vshDomainControlStateToString, vshDomainStateToString)
(vshDomainStateReasonToString): Change switch to enum lookup.
(cmdDomControl, cmdDominfo): Update caller.
* tools/virsh-domain.c (vshDomainVcpuStateToString)
(vshDomainEventToString, vshDomainEventDetailToString): Change
switch to enum lookup.
(vshDomainBlockJobToString, vshDomainJobToString): New functions.
(cmdVcpuinfo, cmdBlockJob, cmdDomjobinfo, cmdEvent): Update
callers.
* tools/virsh-network.c (vshNetworkEventToString): Change switch
to enum lookup.
* tools/virsh-pool.c (vshStoragePoolStateToString): New function.
(cmdPoolList, cmdPoolInfo): Update callers.
* tools/virsh-volume.c (vshVolumeTypeToString): Change switch to
enum lookup.
(cmdVolInfo, cmdVolList): Update callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
In the 'directory' and 'netfs' storage pools, a user can see
both 'file' and 'dir' storage volume types, to know when they
can descend into a subdirectory. But in a network-based storage
pool, such as the upcoming 'gluster' pool, we use 'network'
instead of 'file', and did not have any counterpart for a
directory until this patch. Adding a new volume type
'network-dir' is better than reusing 'dir', because it makes
it clear that the only way to access 'network' volumes within
that container is through the network mounting (leaving 'dir'
for something accessible in the local file system).
* include/libvirt/libvirt.h.in (virStorageVolType): Expand enum.
* docs/formatstorage.html.in: Document it.
* docs/schemasa/storagevol.rng (vol): Allow new value.
* src/conf/storage_conf.c (virStorageVol): Use new value.
* src/qemu/qemu_command.c (qemuBuildVolumeString): Fix client.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* tools/virsh-volume.c (vshVolumeTypeToString): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemVolDelete): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* tests/sysinfotest.c: Consistently use commas.
* tests/viratomictest.c: Likewise.
* tests/vircgroupmock.c: Likewise.
* tools/virsh-domain.c: Likewise.
* tools/virsh-volume.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
There were two separate places with that were stringifying type of a
volume. One of the places was out of sync with types implemented
upstream.
To avoid such problems in the future, this patch adds a common function
to convert the type to string and reuses it across the two said places.
Add an extra space before the first column as we have when listing
domains.
Previous output:
$ virsh vol-list glusterpool
Name Path
-----------------------------------------
asdf gluster://gluster-node-1/gv0/asdf
c gluster://gluster-node-1/gv0/c
cd gluster://gluster-node-1/gv0/cd
$ virsh vol-list glusterpool --details
Name Path Type Capacity Allocation
----------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf unknown 0.00 B 0.00 B
c gluster://gluster-node-1/gv0/c unknown 16.00 B 16.00 B
cd gluster://gluster-node-1/gv0/cd unknown 0.00 B 0.00 B
New output:
$ virsh vol-list glusterpool
Name Path
------------------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf
c gluster://gluster-node-1/gv0/c
cd gluster://gluster-node-1/gv0/cd
$ virsh vol-list glusterpool --details
Name Path Type Capacity Allocation
------------------------------------------------------------------------
asdf gluster://gluster-node-1/gv0/asdf unknown 0.00 B 0.00 B
c gluster://gluster-node-1/gv0/c unknown 16.00 B 16.00 B
cd gluster://gluster-node-1/gv0/cd unknown 0.00 B 0.00 B
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Our documentation says a pool may be referenced by its name or UUID
anywhere if it makes sense (pool-name and pool-uuid are the only
exceptions). However, vol-create and vol-create-as commands did not obey
this.
Introduced by commit 1daa4ba33a. vshCommandOptStringReq returns
0 on *success* or the option is not required && not present, both
are right result. Error out when returning 0 is not correct.
the caller, it doesn't have to check wether it
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Mention file/volume contents instead of just 'file'/'volume'.
Also change Download->download in vol-download help,
to be consistent with other volume commands.
https://bugzilla.redhat.com/show_bug.cgi?id=955537
Don't print the pool option name if it's null.
Before:
virsh # vol-name vol
error: failed to get vol 'vol', specifying --(null) might help
error: Storage volume not found: no storage vol with matching path vol
After:
virsh # vol-name vol
error: failed to get vol 'vol'
error: Storage volume not found: no storage vol with matching path vol
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=924571
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
tools/virsh-volume.c:
* vshStorageVolSorter to sort storage vols by name
* vshStorageVolumeListFree to free the volume objects list
* vshStorageVolumeListCollect to collect the volume objects, trying
to use new API first, fall back to older APIs if it's not supported.
Now that vshCommandRun() checks for the connection automaticaly, remove
all of the redundant checks in the code.
vshConnectionUsability() no longer needs to be exported and this patch
marks it static.
Last of the file splits.
* tools/virsh-volume.h: New file.
* tools/Makefile.am (virsh_SOURCES): Build it.
* tools/virsh.c: Use new header.
* tools/virsh-volume.c: Likewise.
(vshCommandOptVolBy): Fix flag usage.
This splits commands of storage volume group into virsh-volume.c,
The helpers not for common use are moved too. Standard copyright
is added for the new file.
* tools/virsh.c:
Remove commands for storage storage volume and a few helpers.
(vshCommandOptVol, vshCommandOptVolBy).
* tools/virsh-volume.c:
New file, filled with commands of storage volume group and its
helpers.
* po/POTFILES.in:
Add virsh-volume.c
* cfg.mk:
Skip to check config.h including for virsh-volume.c
