This patch continues the earlier conversion made for network
events, with a goal of introducing server-side event filtering
in a later patch. Actual behavior is unchanged without
further RPC changes.
* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
domain events.
* daemon/remote.c (remoteClientInitHook, remoteClientFreeFunc)
(remoteRelayDomainEvent*)
(remoteDispatchConnectDomainEventRegister)
(remoteDispatchConnectDomainEventRegisterAny): Track domain
callbacks dynamically.
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We haven't had a release with network events yet, so we are free
to fix the RPC so that it actually does what we want. Doing
client-side filtering of per-network events is inefficient if a
connection is only interested in events on a single network out
of hundreds available on the server. But to do server-side
per-network filtering, the server needs to know which network
to filter on - so we need to pass an optional network over on
registration. Furthermore, it is possible to have a client with
both a global and per-network filter; in the existing code, the
server sends only one event and the client replicates to both
callbacks. But with server-side filtering, the server will send
the event twice, so we need a way for the client to know which
callbackID is sending an event, to ensure that the client can
filter out events from a registration that does not match the
callbackID from the server. Likewise, the existing style of
deregistering by eventID alone is fine; but in the new style,
we have to remember which callbackID to delete.
This patch fixes the RPC wire definition to contain all the
needed pieces of information, and hooks into the server and
client side improvements of the previous patches, in order to
switch over to full server-side filtering of network events.
Also, since we fixed this in time, all released versions of
libvirtd that support network events also support per-network
filtering, so we can hard-code that assumption into
network_event.c.
Converting domain events to server-side filtering will require
the introduction of new RPC numbers, as well as a server
feature bit that the client can use to tell whether to use
old-style (server only supports global events) or new-style
(server supports filtered events), so that is deferred to a
later set of patches.
* src/conf/network_event.c (virNetworkEventStateRegisterClient):
Assume server-side filtering.
* src/remote/remote_protocol.x
(remote_connect_network_event_register_any_args): Add network
argument.
(remote_connect_network_event_register_any_ret): Return callbackID
instead of count.
(remote_connect_network_event_deregister_any_args): Pass
callbackID instead of eventID.
(remote_connect_network_event_deregister_any_ret): Drop unused
type.
(remote_network_event_lifecycle_msg): Add callbackID.
* daemon/remote.c
(remoteDispatchConnectNetworkEventDeregisterAny): Drop unused arg,
and deal with callbackID from client.
(remoteRelayNetworkEventLifecycle): Pass callbackID.
(remoteDispatchConnectNetworkEventRegisterAny): Likewise, and
recognize non-NULL network.
* src/remote/remote_driver.c
(remoteConnectNetworkEventRegisterAny): Pass network, and track
server side id.
(remoteConnectNetworkEventDeregisterAny): Deregister by callback id.
(remoteNetworkBuildEventLifecycle): Pass remote id to event queue.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, the daemon side of RPC events is hard-coded to at most
one callback per eventID. But when there are hundreds of domains
or networks coupled and multiple conections, then sending every
event to every connection that wants an event, even for the
connections that only care about events for a particular object,
is inefficient. In order to track more than one callback in the
server, we need to store callbacks by more than just their
eventID. This patch rearranges the daemon side to store network
callbacks in a dynamic array, which can eventually be used for
multiple callbacks of the same eventID, although actual behavior
is unchanged without further patches to the RPC protocol. For
ease of review, domain events are saved for a later patch, as
they touch more code.
While at it, fix a bug where a malicious client could send a
negative eventID to cause network event registration to access
outside of array bounds (thankfully not a CVE, since domain
events were already doing the bounds check, and since network
events have not been released).
* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
network events.
* daemon/remote.c (daemonClientEventCallback): New struct.
(remoteEventCallbackFree): New function.
(remoteClientInitHook, remoteRelayNetworkEventLifecycle)
(remoteClientFreeFunc)
(remoteDispatchConnectNetworkEventRegisterAny): Track network
callbacks differently.
(remoteDispatchConnectNetworkEventDeregisterAny): Enforce bounds.
Signed-off-by: Eric Blake <eblake@redhat.com>
When a client disconnects from libvirtd, all event callbacks
must be removed. This involves running the public API
virConnectDomainEventDeregisterAny
This code does not run in normal API dispatch context, so no
identity was set. The result was that the access control drivers
denied the attempt to deregister callbacks. The callbacks thus
continued to trigger after the client was free'd causing fairly
predictable use of free memory & a crash.
This can be triggered by any client with readonly access when
the ACL drivers are active.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'stats' variable was not initialized to NULL, so if some
early validation of the RPC call fails, it is possible to jump
to the 'cleanup' label and VIR_FREE an uninitialized pointer.
This is a security flaw, since the API can be called from a
readonly connection which can trigger the validation checks.
This was introduced in release v0.9.1 onwards by
commit 158ba8730e
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Apr 13 16:21:35 2011 +0100
Merge all returns paths from dispatcher into single path
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With the existing pkcheck (pid, start time) tuple for identifying
the process, there is a race condition, where a process can make
a libvirt RPC call and in another thread exec a setuid application,
causing it to change to effective UID 0. This in turn causes polkit
to do its permission check based on the wrong UID.
To address this, libvirt must get the UID the caller had at time
of connect() (from SO_PEERCRED) and pass a (pid, start time, uid)
triple to the pkcheck program.
This fix requires that libvirt is re-built against a version of
polkit that has the fix for its CVE-2013-4288, so that libvirt
can see 'pkg-config --variable pkcheck_supports_uid polkit-gobject-1'
Signed-off-by: Colin Walters <walters@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllSecrets call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNWFilters call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNodeDevices call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllInterfaces call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllNetworks call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virStoragePoolListAllVolumes call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllStoragePools call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virConnectListAllDomains call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virDomain{SnapshotListAllChildren,ListAllSnapshots}
calls were not bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The return values for the virDomainGetJobStats call were not
bounds checked. This is a robustness issue for clients if
something where to cause corruption of the RPC stream data.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The parameters for the virDomainMigrate*Params RPC calls were
not bounds checks, meaning a malicious client can cause libvirtd
to consume arbitrary memory
This issue was introduced in the 1.1.0 release of libvirt
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since they make use of file descriptor passing, the remote protocol
methods for virDomainCreate{XML}WithFiles must be written by hand.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This is a recurring problem for cygwin :)
For example, see commit 23a4df88.
qemu/qemu_driver.c: In function 'qemuStateInitialize':
qemu/qemu_driver.c:691:13: error: format '%d' expects type 'int', but argument 8 has type 'uid_t' [-Wformat]
* src/qemu/qemu_driver.c (qemuStateInitialize): Add casts.
* daemon/remote.c (remoteDispatchAuthList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
CVE-2013-1962
remoteDispatchStoragePoolListAllVolumes wasn't freeing the pool.
The pool also held a reference to the connection, preventing it from
getting freed and closing the netcf interface driver, which held two
sockets open.
Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.
It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since the 'nparams' variable passed to virTypedParametersFree is
supposed to represent the size of the 'params' array, it is bad
practice to initialize it to a non-zero value, until the array
has been allocated.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of the remote procedure names did not match the
corresponding API names. For example, many lacked the
word 'CONNECT', others re-arranged the names. Update the
procedures so their names exactly match the API names.
Then remove the special case handling of these APIs in
the generator
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Directories python/tools/examples should include them in <> form,
though this patch allows "" form in these directories by excluding
them, a later patch will do the cleanup.
Currently the server determines whether authentication of clients
is complete, by checking whether an identity is set. This patch
removes that lame hack and replaces it with an explicit method
for changing the client auth code
* daemon/remote.c: Update for new APis
* src/libvirt_private.syms, src/rpc/virnetserverclient.c,
src/rpc/virnetserverclient.h: Remove virNetServerClientGetIdentity
and virNetServerClientSetIdentity, adding a new method
virNetServerClientSetAuth.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There's been a few bugs about an expected error from polkit:
https://bugzilla.redhat.com/show_bug.cgi?id=873799https://bugzilla.redhat.com/show_bug.cgi?id=872166
The error is:
Authorization requires authentication but no agent is available.
The error means that polkit needs a password, but there is no polkit
agent registered in your session. Polkit agents are the bit of UI that
pop up and actually ask for your password.
Preface the error with the string 'polkit:' so folks can hopefully
make more sense of it.
This will simplify the refactoring of the ESX storage driver to support
a VMFS and an iSCSI backend.
One of the tasks the storage driver needs to do is to decide which backend
driver needs to be invoked for a given request. This approach extends
virStoragePool and virStorageVol to store extra parameters:
1. privateData: stores pointer to respective backend storage driver.
2. privateDataFreeFunc: stores cleanup function pointer.
virGetStoragePool and virGetStorageVol are modfied to accept these extra
parameters as user params. virStoragePoolDispose and virStorageVolDispose
checks for cleanup operation if available.
The private data pointer allows the ESX storage driver to store a pointer
to the used backend with each storage pool and volume. This avoids the need
to detect the correct backend in each storage driver function call.
It turns out that calling virNodeGetCPUMap(conn, NULL, NULL, 0)
is both useful, and with Viktor's patches, common enough to
optimize. Since this interface hasn't been released yet, we
can change the RPC call.
A bit more background on the optimization - learning the cpu count
is a single file read (/sys/devices/system/cpu/possible), but
learning the number of online cpus can possibly trigger a file
read per cpu, depending on the age of the kernel, and all wasted
if the caller passed NULL for both arguments.
* src/nodeinfo.c (nodeGetCPUMap): Avoid bitmap when not needed.
* src/remote/remote_protocol.x (remote_node_get_cpu_map_args):
Supply two separate flags for needed arguments.
* src/remote/remote_driver.c (remoteNodeGetCPUMap): Update
caller.
* daemon/remote.c (remoteDispatchNodeGetCPUMap): Likewise.
* src/remote_protocol-structs: Regenerate.
- Defined the wire protocol format for virNodeGetCPUMap and its
arguments
- Implemented remote method invocation (remoteNodeGetCPUMap)
- Implemented method dispatcher (remoteDispatchNodeGetCPUMap)
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds support for SUSPEND_DISK event; both lifecycle and
separated. The support is added for QEMU, machines are changed to
PMSUSPENDED, but as QEMU sends SHUTDOWN afterwards, the state changes
to shut-off. This and much more needs to be done in order for libvirt
to work with transient devices, wake-ups etc. This patch is not
aiming for that functionality.
Continue consolidation of process functions by moving some
helpers out of command.{c,h} into virprocess.{c,h}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCommand prefix was inappropriate because the API
does not use any virCommandPtr object instance. This
API closely related to waitpid/exit, so use virProcess
as the prefix
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
* src/rpc/gendispatch.pl: (virNodeSetMemoryParameters is the
the special one which needs a connection object as the first
argument, improve the generator to support it).
* daemon/remote.c: (Implement the server side handler for
virDomainGetMemoryParameters)
* src/remote/remote_driver.c: (Implement the client side handler
for virDomainGetMemoryParameters)
* src/remote/remote_protocol.x: (New RPC procedures for the two
new APIs and structs to represent the args and ret for it)
* src/remote_protocol-structs: Likewise
The RPC generator doesn't support returning list of object yet, this patch
does the work manually.
* daemon/remote.c:
Implement the server side handler remoteDispatchConnectListAllSecrets.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllSecrets.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_SECRETS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNWFilters.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNWFilters.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NWFILTERS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't support returning list of object yet, this patch
does the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNodeDevices.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNodeDevices.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
The RPC generator doesn't support returning list of object yet, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllInterfaces.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllInterfaces.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_INTERFACES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't support returning list of object, this patch
do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchConnectListAllNetworks.
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllNetworks.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_NETWORKS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The RPC generator doesn't returning support list of object, this
patch do the work manually.
* daemon/remote.c:
Implemente the server side handler remoteDispatchStoragePoolListAllVolumes
* src/remote/remote_driver.c:
Add remote driver handler remoteStoragePoolListAllVolumes
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_STORAGE_POOL_LIST_ALL_VOLUMES and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
The unused reason parameter of PM{Suspend,Wakeup} event callbacks was
completely ignored in lot of places and those events were not actually
working at all.
The RPC generator doesn't support returning list of object, this patch does
the work manually.
* daemon/remote.c:
Implement the server side handler remoteDispatchConnectListAllStoragePools
* src/remote/remote_driver.c:
Add remote driver handler remoteConnectListAllStoragePools.
* src/remote/remote_protocol.x:
New RPC procedure REMOTE_PROC_CONNECT_LIST_ALL_STORAGE_POOLS and
structs to represent the args and ret for it.
* src/remote_protocol-structs: Likewise.
Introduce 2 APIs to support emulator threads in remote driver.
1) remoteDomainPinEmulator: call driver api, such as qemudDomainPinEmulator.
2) remoteDomainGetEmulatorPinInfo: call driver api, such as qemudDomainGetEmulatorPinInfo.
They are similar to remoteDomainPinVcpuFlags and remoteDomainGetVcpuPinInfo.
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
This patch updates libvirt's API to allow applications to inspect the
full list of security labels of a domain.
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Currently there is a hook function that is invoked when a
new client connection comes in, which allows an app to
setup private data. This setup will make it difficult to
serialize client state during process re-exec(). Change to
a model where the app registers a callback when creating
the virNetServerPtr instance, which is used to allocate
the client private data immediately during virNetClientPtr
construction.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daemon uses the following pattern when dispatching APIs with typed
parameters:
VIR_ALLOC_N(params, nparams);
virDomain*(dom, params, &nparams, flags);
virTypedParameterArrayClear(params, nparams);
In case nparams was originally set to 0, virDomain* API would fill it
with the number of typed parameters it can provide and we would use this
number (rather than zero) to clear params. Because VIR_ALLOC* returns
non-NULL pointer even if size is 0, the code would end up walking
through random memory. If we were lucky enough and the memory contained
7 (VIR_TYPED_PARAM_STRING) at the right place, we would try to free a
random pointer and crash.
Let's make sure params stays NULL when nparams is 0.
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Update the libvirtd dispatch code to use virReportError
instead of the virNetError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The callback that is invoked when a new RPC client is
initialized does not have any opaque parameter. Add
one so that custom data can be passed into the callback
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The generator doesn't handle lists of virDomainSnapshotPtr, so
this commit requires a bit more work than some RPC additions.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_LIST_ALL_SNAPSHOTS)
(REMOTE_PROC_DOMAIN_SNAPSHOT_LIST_ALL_CHILDREN): New RPC calls,
with corresponding structs.
* daemon/remote.c (remoteDispatchDomainListAllSnapshots)
(remoteDispatchDomainSnapshotListAllChildren): New functions.
* src/remote/remote_driver.c (remoteDomainListAllSnapshots)
(remoteDomainSnapshotListAllChildren): Likewise.
* src/remote_protocol-structs: Regenerate.
This patch wires up the RPC protocol handlers for
virConnectListAllDomains(). The RPC generator has no support for the way
how virConnectListAllDomains() returns the results so the handler code
had to be done manually.
The new api is handled by REMOTE_PROC_CONNECT_LIST_ALL_DOMAINS, with
number 273 and marked with high priority.
Commit 2223ea98 removed the only use of 'server' param in
remoteDispatchAuthPolkit(). Mark the parameter with ATTRIBUTE_UNUSED
to fix the build when configuring with polkit0.
DBus connection. The HAL device code further requires that
the DBus connection is integrated with the event loop and
provides such glue logic itself.
The forthcoming FirewallD integration also requires a
dbus connection with event loop integration. Thus we need
to pull the current event loop glue out of the HAL driver.
Thus we create src/util/virdbus.{c,h} files. This contains
just one method virDBusGetSystemBus() which obtains a handle
to the single shared system bus instance, with event glue
automagically setup.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces a new event type for the QMP event
SUSPEND:
VIR_DOMAIN_EVENT_ID_PMSUSPEND
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventSuspendCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
WAKEUP:
VIR_DOMAIN_EVENT_ID_PMWAKEUP
The event doesn't take any data, but considering there might
be reason for wakeup in future, the callback definition is:
typedef void
(*virConnectDomainEventWakeupCallback)(virConnectPtr conn,
virDomainPtr dom,
int reason,
void *opaque);
"reason" is unused currently, always passes "0".
This patch introduces a new event type for the QMP event
DEVICE_TRAY_MOVED, which occurs when the tray of a removable
disk is moved (i.e opened or closed):
VIR_DOMAIN_EVENT_ID_TRAY_CHANGE
The event's data includes the device alias and the reason
for tray status' changing, which indicates why the tray
status was changed. Thus the callback definition for the event
is:
enum {
VIR_DOMAIN_EVENT_TRAY_CHANGE_OPEN = 0,
VIR_DOMAIN_EVENT_TRAY_CHANGE_CLOSE,
\#ifdef VIR_ENUM_SENTINELS
VIR_DOMAIN_EVENT_TRAY_CHANGE_LAST
\#endif
} virDomainEventTrayChangeReason;
typedef void
(*virConnectDomainEventTrayChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *devAlias,
int reason,
void *opaque);
Overflow can be user-induced, so it deserves more than being called
an internal error. Note that in general, 32-bit platforms have
far more places to trigger this error (anywhere the public API
used 'unsigned long' but the other side of the connection is a
64-bit server); but some are possible on 64-bit platforms (where
the public API computes the product of two numbers).
* include/libvirt/virterror.h (VIR_ERR_OVERFLOW): New error.
* src/util/virterror.c (virErrorMsg): Translate it.
* src/libvirt.c (virDomainSetVcpusFlags, virDomainGetVcpuPinInfo)
(virDomainGetVcpus, virDomainGetCPUStats): Use it.
* daemon/remote.c (HYPER_TO_TYPE): Likewise.
* src/qemu/qemu_driver.c (qemuDomainBlockResize): Likewise.
The RPC code assumed that the array returned by the driver would be
fully populated; that is, ncpus on entry resulted in ncpus * return
value on exit. However, while we don't support holes in the middle
of ncpus, we do want to permit the case of ncpus on entry being
longer than the array returned by the driver (that is, it should be
safe for the caller to pass ncpus=128 on entry, and the driver will
stop populating the array when it hits max_id).
Additionally, a successful return implies that the caller will then
use virTypedParamArrayClear on the entire array; for this to not
free uninitialized memory, the driver must ensure that all skipped
entries are explicitly zeroed (the RPC driver did this, but not
the qemu driver).
There are now three cases:
server 0.9.10 and client 0.9.10 or newer: No impact - there were no
hypervisor drivers that supported cpu stats
server 0.9.11 or newer and client 0.9.10: if the client calls with
ncpus beyond the max, then the rpc call will fail on the client side
and disconnect the client, but the server is no worse for the wear
server 0.9.11 or newer and client 0.9.11: the server can return a
truncated array and the client will do just fine
I reproduced the problem by using a host with 2 CPUs, and doing:
virsh cpu-stats $dom --start 1 --count 2
* daemon/remote.c (remoteDispatchDomainGetCPUStats): Allow driver
to omit tail of array.
* src/remote/remote_driver.c (remoteDomainGetCPUStats):
Accommodate driver that omits tail of array.
* src/libvirt.c (virDomainGetCPUStats): Document this.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Clear all
unpopulated entries.
Regression introduced in commit 7033c5f2, due to improper conversion
from snprintf to virAsprintf.
* daemon/remote.c (remoteDispatchAuthList): Check return value
correctly.
Sometimes, its easier to run children with 2>&1 in shell notation,
and just deal with stdout and stderr interleaved. This was already
possible for fd handling; extend it to also work when doing string
capture of a child process.
* docs/internals/command.html.in: Document this.
* src/util/command.c (virCommandSetErrorBuffer): Likewise.
(virCommandRun, virExecWithHook): Implement it.
* tests/commandtest.c (test14): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Use new command
feature.
GCC complaints about uninitialized use of len, which however is only
used when errors != NULL and in that case len is always initialized.
It's trivial to silence this by always initializing len.
Using new function 'virTypedParameterArrayClear' to simplify block of codes.
* daemon/remote.c, src/remote/remote_driver.c: simplify codes.
Signed-off-by: Alex Jia <ajia@redhat.com>
Unlike other users of virTypedParameter with RPC, this interface
can return zero-filled entries because the interface assumes
2 dimensional array. We compress these entries out from the
server when generating the over-the-wire contents, then reconstitute
them in the client.
Signed-off-by: Eric Blake <eblake@redhat.com>
