So far the argument has not much meaning and was practically ignored.
This is not good since when doing memory hotplug, the size of desired
hugepage backing is passed in that argument. Taking closer look at the
tests I'm fixing reveals the bug. For instance, while the following is
in the test:
<memory model='dimm'>
<source>
<nodemask>1-3</nodemask>
<pagesize unit='KiB'>4096</pagesize>
</source>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
<address type='dimm' slot='0' base='0x100000000'/>
</memory>
the generated commandline corresponding to this XML was:
-object memory-backend-ram,id=memdimm0,size=536870912,\
host-nodes=1-3,policy=bind
Have you noticed? Yes, memory-backend-ram! Nothing can be further away
from the right answer. The hugepage backing is requested in the XML
and we happily ignore it. This is just not right. It's
memory-backend-file which should have been used:
-object memory-backend-file,id=memdimm0,prealloc=yes,\
mem-path=/dev/hugepages4M/libvirt/qemu,size=536870912,\
host-nodes=1-3,policy=bind
The problem is, that @pagesize passed to qemuBuildMemoryBackendStr
(where this part of commandline is built) was ignored. The hugepage to
back memory was searched only and only by NUMA nodes pinning. This
works only for regular guest NUMA nodes.
Then, I'm changing the hugepages size in the test XMLs too. This is
simply because in the test suite we create dummy mount points just for
2M and 1G hugepages. And in the test 4M was requested. I'm sticking to
2M, but 1G should just work too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1196644
This function constructs the backend (host facing) part of the
memory device. At the beginning, the configured hugepages are
searched to find the best match for given guest NUMA node.
Configured hugepages can have a @nodeset attribute to specify on
which guest NUMA nodes should be the hugepages backing used.
There is, however, one 'corner case'. Users may just tell 'use
hugepages to back all the nodes'. In other words:
<memoryBacking>
<hugepages/>
</memoryBacking>
<cpu>
<numa>
<cell id='0' cpus='0-1' memory='1024000' unit='KiB'/>
</numa>
</cpu>
Our code fails in this case. Well, since there's no @nodeset (nor
any <page/> child element to <hugepages/>) we fail to lookup the
default hugepage size to use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1235116
According to our XML definition, zero is as valid as any other value.
Mainly because it should be kernel-agnostic.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Drop internal data structures and use the proper fields in virDomainDef.
This allows to greatly simplify the code and allows to remove the
private data structure that was holding just redundant data.
This patch also fixes the bogous output where we'd report that a fresh
VM without vCPU pinning would not run on all vcpus.
Only self-locking APIs are used and the pointer is immutable so there's
no need to lock the driver to access the domain list.
This patch removes locking partially for everything that will not be
converted to testDomObjFromDomain in the next patch.
Make testObjectEventQueue tolerant to NULL @event and move it so that it
does not require a prototype. Additionally we are now able to remove
locking when accessing driver->eventState, since it's using self-locking
APIs and the pointer is immutable.
When migration fails in qemuMigrationPrepareAny, we unconditionally call
qemuDomainRemoveInactive, which should only be called for transient
domains. The check for !vm->persistent was accidentally removed by
commit 540c339.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In the e6d180f07f commit the parallels driver was renamed to vz.
However, there was a commit merged later, which was sent to the list
before the rename. The other commit is 6de12b026b. Fix all the
missing renames.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We already enable the parser option to detect invalid UTF-8, but
didn't test it. Also, JSON states that behavior of an object
with a duplicated key is undefined; we chose to reject it, but
were not testing it.
With the enhanced tests in place, we can simplify yajl2
initialization by relying on parser defaults being sane.
* src/util/virjson.c (virJSONValueFromString): Simplify.
* tests/jsontest.c (mymain): Test more bad usage.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since older yajl ignores trailing garbage, a client can cause
problems by intentionally ending the wrapper array early. Since
we already track nesting, it's not too much harder to reject
invalid nesting pops.
* src/util/virjson. (_virJSONParser): Add field.
(virJSONValueFromString): Set witness.
(virJSONParserHandleEndArray): Use it to catch abuse.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Yajl 2 has a nice feature that it can be configured whether to
allow multiple JSON objects parsed from a single stream, defaulting
to off. And yajl 1.0.12 at least provided a way to tell if all
input bytes were parsed, or if trailing bytes remained after a
valid JSON object was parsed. But we target RHEL 6 yajl 1.0.7,
which has neither of these. So fake it by always parsing '[...]'
instead, so that trailing garbage either trips up the array parse,
or is easily detected when unwrapping the result.
* src/util/virjson.c (virJSONValueFromString): With older json,
wrap text to avoid trailing garbage.
* tests/jsontest.c (mymain): Add tests for this.
Signed-off-by: Eric Blake <eblake@redhat.com>
We have been allowing javascript style comments in JSON ever
since commit 9428f2c (v0.7.5), but qemu doesn't send them, and
they are not strict JSON. Reject them for now; if we can later
prove that it is worthwhile, we can reinstate it at that point
(or even make it conditional, by adding a bool parameter to
the libvirt entry point).
* src/util/virjson.c (virJSONValueFromString): Don't enable
comment parsing.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit ceb496e5 fails on RHEL 6, with yajl 1.0.7, because that
version of yajl returns yajl_status_insufficient_data when the
parser is waiting for the rest of a token (this enum value was
dropped in yajl 2, so we have to wrap it). It also exposes a
problem where older yajl silently ignores trailing garbage after
a successful parse, so this patch works around that by changing
the testsuite. Another more invasive patch can add tighter
semantics to json parsing, but this is sufficient for a minimal
clean backport.
While touching this, fix up our error message cleanup. Yajl
documents that error messages produced by yajl_get_error()
MUST be cleaned with yajl_free_error(); this is certainly
true if we were to pass non-NULL allocator callbacks during
yajl_alloc(), but probably harmless in our usage of passing
NULL. But better safe than sorry.
* src/util/virjson.c (virJSONValueFromString): Allow different
error code. Use canonical cleanup of error message.
(VIR_YAJL_STATUS_OK): New helper macro.
* tests/jsontest.c (mymain): Wrap text to avoid difference in
trailing garbage handling
Signed-off-by: Eric Blake <eblake@redhat.com>
In this patch we add VIR_DOMAIN_DEVICE_NET handlers implementation
for domainAttachDevice and domainDetachDevice callbacks.
As soon as we don't support this operation for hypervisor type domains,
we implement this functionality for containers only.
In detach procedure we find network device by MAC address.
Because PrlVmDevNet_GetMacAddress() returns MAC as a UTF-8 encoded
null-terminated string, we use memcmp() to compare it.
Also we remove corresponding virtual network by prlsdkDelNetAdapter call.
This patch provides support for the new watchdog model "diag288".
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Related to :
https://bugzilla.redhat.com/show_bug.cgi?id=1171933
Rather than ignore the return status from virStorageBackendSCSIFindLUs,
cause a failure to start the pool if a -1 is returned. Issue was noted
during testing of the bz for iscsi that 'scsi' and 'fc' pools don't fail.
There are two macros used in the test: CAPSCOMP and CAPS_EXPECT_ERR.
Both run a test case and if a failure occurred, they set the @ret
variable to a value of -1 to indicate an error. Well, that's what they
should do. Due to a typo, they set the variable to a positive one
effectively masking any failed test.
Then, we have couple of tests failing. Fix them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '1feaccf0' attempted to handle an empty secrettype value; however,
it made a mistake by processing the secretType as if it was the original
secrettype string. The 'secretType' is actually whether 'usage' or 'uuid'
was used.
Thus adjust part of the change to make the same check for def->src->type !=
VIR_STORAGE_TYPE_VOLUME before setting auth_secret_usage from the
secrettype field.
Luckily the aforementioned commits misdeed would be overwritten by the
call to virStorageTranslateDiskSourcePool
Just refactor existing code to use a child buf instead of
check all element before format <blkiotune> and <cputune>.
This will avoid the more and more bigger element check during
we introduce new elements in <blkiotune> and <cputune> in the
future.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Functions like virDomainOpenConsole() and virDomainOpenChannel() accept
NULL as a dev_name parameter. Try using alias for the error message if
dev_name is not specified.
Before:
error: internal error: character device <null> is not using a PTY
After:
error: internal error: character device serial0 is not using a PTY
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The acl.html file includes aclperms.htmlinc which is generated.
However, acl.html is generated too from acl.html.tmp. And in fact,
this is the place where the aclperms file is needed. Fix the
dependency in Makefile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '832a9256' adjusted the code to recognize when the default
type of "unknown" was provided as the format type and to use "dos" if
found. Since the pool is built with "dos" and it could cause some
confusion when formatting the XML after building by seeing "unknown"
in the output, let's just adjust the pool's setting to "dos" so that
subsequent formats will see the value.
Currently the grammar uses "none" for a "valid" Disk Storage Pool
format type; however, virStoragePoolFormatDisk uses "unknown" so
virt-xml-validate will fail to validate when "unknown" is found
By trying to lead the way of clean includes, I sorted the lines
alphabetically and that is a problem for mingw builds with gnulib.
As 'configmake.h' defines DATADIR and 'datatypes.h' transitively
includes 'winsock.h' that uses 'DATADIR' as a name for a struct,
it's enough to reorder those.
Even though this might be worked around in gnulib later on, this
fixes the build for now.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The type='scsi' parameter of an address element is ignored
if placed within a hostdev section, and rejected by the XML
schema used by virt-xml-validate. Remove it from the doc,
and correct a typo in the remaining address arguments.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Defining a domain with a SCSI disk attached via a hostdev
tag and a source address unit value longer than two digits
causes an error when editing the domain with virsh edit,
even if no changes are made to the domain definition.
The error suggests invalid XML, somewhere:
# virsh edit lmb_guest
error: XML document failed to validate against schema:
Unable to validate doc against /usr/local/share/libvirt/schemas/domain.rng
Extra element devices in interleave
Element domain failed to validate content
The virt-xml-validate tool fails with a similar error:
# virt-xml-validate lmb_guest.xml
Relax-NG validity error : Extra element devices in interleave
lmb_guest.xml:17: element devices: Relax-NG validity error :
Element domain failed to validate content
lmb_guest.xml fails to validate
The hostdev tag requires a source address to be specified,
which includes bus, target, and unit address attributes.
According to the SCSI Architecture Model spec (section
4.9 of SAM-2), a LUN address is 64 bits and thus could be
up to 20 decimal digits long. Unfortunately, the XML
schema limits this string to just two digits. Similarly,
the target field can be up to 32 bits in length, which
would be 10 decimal digits.
# lsscsi -xx
[0:0:19:0x4022401100000000] disk IBM 2107900 3.44 /dev/sda
# lsscsi
[0:0:19:1074872354]disk IBM 2107900 3.44 /dev/sda
# cat lmb_guest.xml
<domain type='kvm'>
<name>lmb_guest</name>
<memory unit='MiB'>1024</memory>
...trimmed...
<devices>
<controller type='scsi' model='virtio-scsi' index='0'/>
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='19' unit='1074872354'/>
</source>
</hostdev>
...trimmed...
Since the reference unit and target fields are used in
several places in the XML schema, create a separate one
specific for SCSI Logical Units that will permit the
greater length. This permits both the validation utility
and the virsh edit command to succeed when a hostdev
tag is included.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Rather than grabbing an arbitrary JSON value and then checking
if it has the right type, we might as well request the correct
type to begin with.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent)
(qemuMonitorJSONCommandWithFd, qemuMonitorJSONHandleGraphics)
(qemuMonitorJSONGetStatus, qemuMonitorJSONExtractCPUInfo)
(qemuMonitorJSONGetVirtType, qemuMonitorJSONGetBalloonInfo)
(qemuMonitorJSONGetMemoryStats)
(qemuMonitorJSONDevGetBlockExtent)
(qemuMonitorJSONGetOneBlockStatsInfo)
(qemuMonitorJSONGetAllBlockStatsInfo)
(qemuMonitorJSONBlockStatsUpdateCapacityOne)
(qemuMonitorJSONBlockStatsUpdateCapacity)
(qemuMonitorJSONGetBlockExtent)
(qemuMonitorJSONGetMigrationStatusReply)
(qemuMonitorJSONGetDumpGuestMemoryCapability)
(qemuMonitorJSONAddFd, qemuMonitorJSONQueryRxFilterParse)
(qemuMonitorJSONExtractChardevInfo)
(qemuMonitorJSONDiskNameLookupOne)
(qemuMonitorJSONDiskNameLookup)
(qemuMonitorJSONGetAllBlockJobInfo)
(qemuMonitorJSONBlockIoThrottleInfo, qemuMonitorJSONGetVersion)
(qemuMonitorJSONGetMachines, qemuMonitorJSONGetCPUDefinitions)
(qemuMonitorJSONGetCommands, qemuMonitorJSONGetEvents)
(qemuMonitorJSONGetKVMState, qemuMonitorJSONGetObjectTypes)
(qemuMonitorJSONGetObjectListPaths)
(qemuMonitorJSONGetObjectProps, qemuMonitorJSONGetTargetArch)
(qemuMonitorJSONGetMigrationCapabilities)
(qemuMonitorJSONGetStringArray, qemuMonitorJSONAttachCharDev)
(qemuMonitorJSONGetCPUx86Data, qemuMonitorJSONGetIOThreads)
(qemuMonitorJSONGetMemoryDeviceInfo): Use shorter idioms.
Signed-off-by: Eric Blake <eblake@redhat.com>
While working in qemu_monitor_json, I repeatedly found myself
getting a value then checking if it was an object. Add some
wrappers to make this task easier.
* src/util/virjson.c (virJSONValueObjectGetByType)
(virJSONValueObjectGetObject, virJSONValueObjectGetArray): New
functions.
(virJSONValueObjectGetString, virJSONValueObjectGetNumberInt)
(virJSONValueObjectGetNumberUint)
(virJSONValueObjectGetNumberLong)
(virJSONValueObjectGetNumberUlong)
(virJSONValueObjectGetNumberDouble)
(virJSONValueObjectGetBoolean): Simplify.
(virJSONValueIsNull): Change return type.
* src/util/virjson.h: Reflect changes.
* src/libvirt_private.syms (virjson.h): Export them.
* tests/jsontest.c (testJSONLookup): New test.
Signed-off-by: Eric Blake <eblake@redhat.com>
