Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f878ebda700 (LWP 31264)]
0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
(gdb) bt
#0 0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
#1 0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
#3 0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
#4 0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
#5 0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
#6 0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
#7 0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) frame 2
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
228 dbus_message_unref(reply);
(gdb) p reply
$1 = (DBusMessage *) 0x0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Move the logic from virDomainDiskDefDstDuplicates into
virDomainDiskDefCheckDuplicateInfo so that we don't have to loop
multiple times through the array of disks. Since the original function
was called in qemuBuildDriveDevStr, it was actually called for every
single disk which was quite wasteful.
Additionally the target uniqueness check needed to be duplicated in
the disk hotplug case, since the disk was inserted into the domain
definition after the device string was formatted and thus
virDomainDiskDefDstDuplicates didn't do anything in that case.
In the reverted commit d2e5538b1, the libxl driver was changed to copy
interface names autogenerated by libxl to the corresponding network def
in the domain's virDomainDef object. The copied name is freed when the
domain transitions to the shutoff state. But when migrating a domain,
the autogenerated name is included in the XML sent to the destination
host. It is possible an interface with the same name already exists on
the destination host, causing migration to fail.
This patch defines a new capability for setting the network device
prefix that will be used in the driver. Valid prefixes are
VIR_NET_GENERATED_PREFIX or the one announced by the driver.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
A pretty nasty deadlock occurs while trying to rename a VM in parallel
with virDomainObjListNumOfDomains.
The short description of the problem is as follows:
Thread #1:
qemuDomainRename:
------> aquires domain lock by qemuDomObjFromDomain
---------> waits for domain list lock in any of the listed functions:
- virDomainObjListFindByName
- virDomainObjListRenameAddNew
- virDomainObjListRenameRemove
Thread #2:
virDomainObjListNumOfDomains:
------> aquires domain list lock
---------> waits for domain lock in virDomainObjListCount
Introduce generic virDomainObjListRename function for renaming domains.
It aquires list lock in right order to avoid deadlock. Callback is used
to make driver specific domain updates.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
On the host when we start a container, it will be
placed in a cgroup path of
/machine.slice/machine-lxc\x2ddemo.scope
under /sys/fs/cgroup/*
Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.
While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup
This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg
/machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope
This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup
Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This new function will add a single controller of the given model,
except the case of ich9-usb-ehci1 (the master controller for a USB2
controller set) in which case a set of related controllers will be
added (EHCI1, UHCI1, UHCI2, UHCI3). These controllers will not be
given PCI addresses, but should be otherwise ready to use.
"-1" is allowed for controller model, and means "default for this
machinetype". This matches the existing practice in
qemuDomainDefPostParse(), which always adds the default controller
with model = -1, and relies on the commandline builder to set a model
(that is wrong, but will be fixed later).
This replaces the virPCIKnownStubs string array that was used
internally for stub driver validation.
Advantages:
* possible values are well-defined
* typos in driver names will be detected at compile time
* avoids having several copies of the same string around
* no error checking required when setting / getting value
The names used mirror those in the
virDomainHostdevSubsysPCIBackendType enumeration.
We only support hotplugging SCSI controllers.
The USB and virtio-serial related code was never reachable because
this function was only called for VIR_DOMAIN_CONTROLLER_TYPE_SCSI
controllers.
This reverts commit ee0d97a and parts of commits 16db8d2
and d6d54cd1.
This function can be used to retrieve the current locked memory
limit for a process, so that the setting can be later restored.
Add a configure check for getrlimit(), which we now use.
On the very first log message we send to any output, we include
the libvirt version number and package string. In some bug reports
we have been given libvirtd.log files that came from a different
host than the corresponding /var/log/libvirt/qemu log files. So
extend the initial log message to include the hostname too.
eg on first log message we would now see:
$ libvirtd
2015-12-04 17:35:36.610+0000: 20917: info : libvirt version: 1.3.0
2015-12-04 17:35:36.610+0000: 20917: info : hostname: dhcp-1-180.lcy.redhat.com
2015-12-04 17:35:36.610+0000: 20917: error : qemuMonitorIO:687 : internal error: End of file from monitor
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Once more stuff will be moved into the vCPU data structure it will be
necessary to get a specific one in some ocasions. Add a helper that will
simplify this task.
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As we need to provide support for URI aliases in libvirt-admin as well, URI
alias matching needs to be internally visible. Since
virConnectOpenResolveURIAlias does have a compatible signature, it could be
easily reused by libvirt-admin. This patch moves URI alias matching to util,
renaming it accordingly.
virConnectGetConfig and virConnectGetConfigPath were static libvirt
methods, merely because there hasn't been any need for having them
internally exported yet. Since libvirt-admin also needs to reference
its config file, 'xGetConfig' should be exported.
Besides moving, this patch also renames the methods accordingly,
as they are libvirt config specific.
Add the virLogManager API which allows for communication with
the virtlogd daemon to RPC program. This provides the client
side API to open log files for guest domains.
The virtlogd daemon is setup to auto-spawn on first use when
running unprivileged. For privileged usage, systemd socket
activation is used instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virRotatingFileReader and virRotatingFileWriter objects
which allow reading & writing from/to files with automation
rotation to N backup files when a size limit is reached. This
is useful for guest logging when a guaranteed finite size
limit is required. Use of external tools like logrotate is
inadequate since it leaves the possibility for guest to DOS
the host in between invokations of logrotate.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a new helper function "virDiskNameParse" which extends
virDiskNameToIndex but handling both disk index and partition index.
Also rework virDiskNameToIndex to be based on virDiskNameParse.
A test is also added for this function testing both valid and
invalid disk names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
commit db488c79 assumed that dnsmasq would complete IPv6 DAD before
daemonizing, but in reality it doesn't wait, which creates problems
when libvirt's bridge driver sets the matching "dummy tap device" to
IFF_DOWN prior to DAD completing.
This patch waits for DAD completion by periodically polling the kernel
using netlink to check whether there are any IPv6 addresses assigned
to bridge which have a 'tentative' state (if there are any in this
state, then DAD hasn't yet finished). After DAD is finished, execution
continues. To avoid an endless hang in case something was wrong with
the kernel's DAD, we wait a maximum of 5 seconds.
Let's check to ensure we can find the Partition Table in the label
and that libvirt actually recognizes that type; otherwise, when we
go to read the partitions during a refresh operation we may not be
reading what we expect.
This will expand upon the types of errors or reason that a build
would fail, so we can create more direct error messages.
Add 'initial_memory' member to struct virDomainMemtune so that the
memory size can be pre-calculated once instead of inferring it always
again and again.
Separating of the fields will also allow finer granularity of decisions
in later patches where it will allow to keep the old initial memory
value in cases where we are handling incomming migration from older
versions that did not always update the size from NUMA as the code did
previously.
The change also requires modification of the qemu memory alignment
function since at the point where we are modifying the size of NUMA
nodes the total size needs to be recalculated too.
The refactoring done in this patch also fixes a crash in the hyperv
driver that did not properly initialize def->numa and thus
virDomainNumaGetMemorySize(def->numa) crashed.
In summary this patch should have no functional impact at this point.
Similar to commit id '35847860', it's possible to attempt to create
a 'netfs' directory in an NFS root-squash environment which will cause
the 'vol-delete' command to fail. It's also possible error paths from
the 'vol-create' would result in an error to remove a created directory
if the permissions were incorrect (and disallowed root access).
Thus rename the virFileUnlink to be virFileRemove to match the C API
functionality, adjust the code to following using rmdir or unlink
depending on the path type, and then use/call it for the VIR_STORAGE_VOL_DIR
I always felt like this function is qemu specific rather than
libvirt-wide. Other drivers may act differently on virDomainDef
change and in fact may require talking to underlying hypervisor
even if something else's than disk->src has changed. I know that
the function is still incomplete, but lets break that into two
commits that are easier to review. This one is pure code
movement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions were made static as a part of commit cbfe38c since
they were no longer called from outside virnetdev.c. We once again
need to call them from another file, so this patch makes them once
again public.
In an NFS root-squashed environment the 'vol-delete' command will fail to
'unlink' the target volume since it was created under a different uid:gid.
This code continues the concepts introduced in virFileOpenForked and
virDirCreate[NoFork] with respect to running the unlink command under
the uid/gid of the child. Unlike the other two, don't retry on EACCES
(that's why we're here doing this now).
