Introduce a helper to check supported device and domain config and move
the memory hotplug checks to it.
The advantage of this approach is that by default all new features are
considered unsupported by all hypervisors unless specifically changed
rather than the previous approach where every hypervisor would need to
declare that a given feature is unsupported.
We would happily report and free statistics of a completed migration
even before it actually completed (on the source host while migration is
in the Finish phase).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Computing a total downtime during a migration requires us to store a
time stamp when guest CPUs get stopped. The value (and all other
statistics) is then transferred to the destination to compute the
downtime. Because the stopped time stamp is stored by a STOP event
handler while the statistics which will be sent over to the destination
are copied synchronously within qemuMigrationWaitForCompletion.
Depending on the timing of STOP and MIGRATION events, we may end up
copying (and transferring) statistics without the stopped time stamp
set. Let's make sure we always use the correct time stamp.
https://bugzilla.redhat.com/show_bug.cgi?id=1282744
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With a very old QEMU which doesn't support events we need to explicitly
call qemuMigrationSetOffline at the end of migration to update our
internal state. On the other hand, if we talk to QEMU using QMP, we
should just wait for the STOP event and let the event handler update the
state and trigger a libvirt event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We should not overwrite all migration statistics on the source with the
numbers sent by the destination since the source may have an updated
view in some cases (such as post-copy migration). It's safer to update
just the timing info we need to get from the destination and be prepared
for the future. And we should only do all this after a successful
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Statistics for a completed migration only make sense if the migration
was successful. Let's not store them in priv->job.completed until we
are sure it was a success.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The code does not handle renaming of the save state file. In addition to
that the resuming code would need to be tweaked to handle the name
change since the XML is extracted from the save image. The easies option
is to make the rename API even less useful by forbiding this.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1314594
While trying to build with -Os couple of compile errors showed
up.
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:13666:24: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainChrDefPtr ret, **arrPtr = NULL;
^
Compiler fails to see that @ret is used only if set in the loop,
but whatever, there's no harm in initializing the variable.
In vboxAttachDrivesNew and _vboxAttachDrivesOld compiler thinks
that @rc may be used uninitialized. Well, not directly, but maybe
after some optimization. Yet again, no harm in initializing a
variable.
In file included from ./util/virthread.h:26:0,
from ./datatypes.h:28,
from vbox/vbox_tmpl.c:43,
from vbox/vbox_V3_1.c:37:
vbox/vbox_tmpl.c: In function '_vboxAttachDrivesOld':
./util/virerror.h:181:5: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
^
In file included from vbox/vbox_V3_1.c:37:0:
vbox/vbox_tmpl.c:1041:14: note: 'rc' was declared here
nsresult rc;
^
Yet again, one uninitialized variable:
qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
qemu/qemu_driver.c:17194:9: error: 'baseSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemuDomainPrepareDiskChainElement(driver, vm, baseSource,
^
And another one:
storage/storage_backend_logical.c: In function 'virStorageBackendLogicalMatchPoolSource.isra.2':
storage/storage_backend_logical.c:618:33: error: 'thisSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
thisSource->devices[j].path))
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When SPICE graphics is configured for a domain but we did not ask the
client to switch to the destination, we should not wait for
SPICE_MIGRATE_COMPLETED event (which will never come).
https://bugzilla.redhat.com/show_bug.cgi?id=1151723
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Migration statistics are not available on the destination host and
starting a query job during incoming migration is not allowed. Trying to
do that would result in
Timed out during operation: cannot acquire state change lock (held
by remoteDispatchDomainMigratePrepare3Params)
error. We should not even try to start the job.
https://bugzilla.redhat.com/show_bug.cgi?id=1278727
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuProcessSetupEmulator runs at a point in time where there is only
the qemu main thread. Use virCgroupAddTask to put just that one task
into the emulator cgroup. That patch makes virCgroupMoveTask and
virCgroupAddTaskStrController obsolete.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Move qemuProcessSetupEmulator up under qemuSetupCgroup. That way
we move the one main thread right into the emulator cgroup, instead
of moving multiple threads later on. And we do not actually want any
threads running in the parent cgroups (cpu cpuacct cpuset).
Signed-off-by: Henning Schild <henning.schild@siemens.com>
This attribute is used to extend secondary PCI bar and expose it to the
guest as 64bit memory. It works like this: attribute vram is there to
set size of secondary PCI bar and guest sees it as 32bit memory,
attribute vram64 can extend this secondary PCI bar. If both attributes
are used, guest sees two memory bars, both address the same memory, with
the difference that the 32bit bar can address only the first part of the
whole memory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1260749
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We always place primary video device at first place, to make it easier
to create a qemu command or format an xml, but we should also set the
primary boolean for primary video device to 'true'.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We honour the placement bitmaps when starting up, so there's no point in
having this check. Additionally the check was buggy since it checked
vm->def all the time even if the user requested to modify the persistent
definition which had different configuration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1308317
Add Spice graphics gl attribute. qemu 2.6 should have -spice gl=on argument to
enable opengl rendering context (patches on the ML). This is necessary to
actually enable virgl rendering.
Add a qemuxml2argv test for virtio-gpu + spice with virgl.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Per-domain directories were introduced in order to be able to
completely separate security labels for each domain (commit
f1f68ca334). However when the domain
name is long (let's say a ridiculous 110 characters), we cannot
connect to the monitor socket because on length of UNIX socket address
is limited. In order to get around this, let's shorten it in similar
fashion and in order to avoid conflicts, throw in an ID there as well.
Also save that into the status XML and load the old status XMLs
properly (to clean up after older domains). That way we can change it
in the future.
The shortening can be seen in qemuxml2argv tests, for example in the
hugepages-pages2 case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of a machine type in the qemu driver's
post parse function instead of crashing.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
There's this check when building command line that whenever
domain has no graphics card configured we put -nographics onto
qemu command line. The check is 'if (!def->graphics)'. This
makes coverity think that def->graphics can be NULL, which is
true. But later in the code every access to def->graphics is
guarded by check for def->ngraphics, so no crash occurs. But this
is something that coverity fails to deduct.
In order to shut coverity up lets change the condition to
'if (!def->ngraphics)'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In case you will specify graphics like this:
<graphics type='spice' port='-1'/>
or
<graphics type='spice' port='-1' tlsPort='6000'/>
libvirt will automatically add autoport='no'. This leads to an issue
that in qemuProcessStop() we don't release that port because we are
releasing both port if autoport=yes or only port marked as reserved.
If autoport=no but we request to generate port via '-1' we need to mark
that port as reserved in order to release it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1299696
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This does nothing more than adding the new device and capability.
The device is present since QEMU 2.6.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
PostParse handles it for us now.
This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering
Calling qemuProcessStop without a job opens a way to race conditions
with qemuDomainObjExitMonitor called in another thread. A real world
example of such a race condition:
- migration thread (A) calls qemuMigrationWaitForSpice
- another thread (B) starts processing qemuDomainAbortJob API
- thread B signals thread A via qemuDomainObjAbortAsyncJob
- thread B enters monitor (qemuDomainObjEnterMonitor)
- thread B calls qemuMonitorSend
- thread A awakens and calls qemuProcessStop
- thread A calls qemuMonitorClose and sets priv->mon to NULL
- thread B calls qemuDomainObjExitMonitor with priv->mon == NULL
=> monitor stays ref'ed and locked
Depending on how lucky we are, the race may result in a memory leak or
it can even deadlock libvirtd's event loop if it tries to lock the
monitor to process an event received before qemuMonitorClose was called.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Stopping a domain without a job risks a race condition with another
thread which started a job a which does not expect anyone else to be
messing around with the same domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Only a small portion of processGuestPanicEvent was enclosed within a
job, let's make sure we use the job for all operations to avoid race
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destroying a domain we need to make sure we will be able to start a
job no matter what other operations are running or even stuck in a job.
This is done by killing the domain before starting the destroy job.
Let's introduce qemuProcessBeginStopJob which combines killing a domain
and starting a job in a single API which can be called everywhere we
need a job to stop a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Ending a nested job is no different from ending any other (non-async)
job, after all the code in qemuDomainBeginJobInternal does not handle
them differently either. Thus we should call qemuDomainObjEndJob to stop
nested jobs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuDomainHelperGetVcpus would correctly return an array of
virVcpuInfoPtr structs for online vcpus even for sparse topologies, but
the loop that fills the returned typed parameters would number the vcpus
incorrectly. Fortunately sparse topologies aren't supported yet.
