These old tests expect to run against a real xen connection via
xend running on the host. Our intentions for the test suite are
that it doesn't require interacting with any specific host resources,
so these don't really belong here.
Store the test list in libvirtd_test_scripts, and use it where
appropriate. This also fixes the fact that we didn't ship
virsh-uriprecedence when libvirtd build is disabled.
$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf
$ libvirtd --timeout=10
2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org)
2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf
Rather than try to fix this in the depths of the parser, just catch
the case when a config file doesn't end in a newline, and manually
append a newline to the content before parsing
https://bugzilla.redhat.com/show_bug.cgi?id=1151409
According to the dnsmasq manpage, the netmask for IPv4 address ranges
will be auto-deteremined from the interface dnsmasq is listening on,
but it can't do this for IPv6 for some reason - it instead assumes a
network prefix of 64 for all IPv6 address ranges. If this is
incorrect, dnsmasq will refuse to give out an address to clients,
instead logging this message:
dnsmasq-dhcp[2380]: no address range available for DHCPv6 request via virbr0
The solution is for libvirt to add ",$prefix" to all IPv6 dhcp-range
arguments when building the dnsmasq.conf file.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1033739
Commit a8743c39 removed keepalive_required attribute from daemon, added a test
case for it, but forgot to enable the test itself in virnetdaemontest.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit a4746114 renamed virnetservertest to virnetdaemontest to reflect some
refactor changes to virNetServer code (which moved daemon-related parts to
virNetDaemon module). Moving test data from virnetserverdata to
virnetdaemondata was also part of the commit, but the commit failed to clean
half of the files that were copied (rather than moved).
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This an ubuntu/debian packaging convention. At one point it may have
been an actually different binary, but at least as of ubuntu precise
(the oldest supported ubuntu distro, released april 2012) kvm-img is
just a symlink to qemu-img for back compat.
I think it's safe to drop support for it
Commit 3a773c43c8 introduced the testCompareNetXML2XMLResult
enumeration; however, in one instance the result variable was
assigned a value from the very similar testCompareDocXML2XMLResult
enumeration, leading to a build error.
networkxml2xmltest.c:33:42: error:
implicit conversion from enumeration type 'testCompareDomXML2XMLResult'
to different enumeration type 'testCompareNetXML2XMLResult'
[-Werror,-Wenum-conversion]
testCompareNetXML2XMLResult result = TEST_COMPARE_DOM_XML2XML_RESULT_SUCCESS;
~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the proper value (TEST_COMPARE_NET_XML2XML_RESULT_SUCCESS) instead.
The struct contains a single boolean field, 'supported':
the meaning of this field is too generic to be limited to
devices only, and in fact it's already being used for
other things like loaders and OSs.
Instead of trying to come up with a more generic name just
get rid of the struct altogether.
Prior to this patch we didn't make any attempt to prevent two entries
in the array of interfaces/PCI devices from pointing to the same
device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1002423
This is patterned after similar functionality for domain XML tests,
but tries harder to avoid reading non-existent networkxml2xmlout data
file when parse fails.
So in glibc-2.23 sys/sysmacros.h is no longer included from sys/types.h
and we don't build because of the usage of major/minor/makedev macros.
Autoconf already has AC_HEADER_MAJOR macro that check where exactly
these functions/macros are defined, so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
While working on the tests for the secret initialization vector, I found
that the existing iSCSI tests were lacking in how they defined the IQN.
Many had IQN's of just 'iqn.1992-01.com.example' for one disk while using
'iqn.1992-01.com.example/1' for the second disk (same for hostdevs - guess
how they were copied/generated).
Typically (and documented this way), IQN's would include be of the form
'iqn.1992-01.com.example:storage/1' indicating an IQN using "storage" for
naming authority specific string and "/1" for the iSCSI LUN.
So modify the input XML's to use the more proper format - this of course
has a ripple effect on the output XML and the args.
Also note that the "%3A" is generated by the virURIFormat/xmlSaveUri
to represent the colon.
Signed-off-by: John Ferlan <jferlan@redhat.com>
virTypedParamsValidate currently uses an index based check to find
duplicate parameters. This check does not work. Consider the following
simple example:
We have only 2 keys
A (multiples allowed)
B (multiples NOT allowed)
We are given the following list of parameters to check:
A
A
B
If you work through the validation loop you will see that our last iteration
through the loop has i=2 and j=1. In this case, i > j and keys[j].value.i will
indicate that multiples are not allowed. Both conditionals are satisfied so
an incorrect error will be given: "parameter '%s' occurs multiple times"
This patch replaces the index based check with code that remembers
the name of the last parameter seen and only triggers the error case if
the current parameter name equals the last one. This works because the
list is sorted and duplicate parameters will be grouped together.
In reality, we hit this bug while using selective block migration to migrate
a guest with 5 disks. 5 was apparently just the right number to push i > j
and hit this bug.
virsh migrate --live guestname --copy-storage-all
--migrate-disks vdb,vdc,vdd,vde,vdf
qemu+ssh://dsthost/system
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
This is backed by the qemu device pxb-pcie, which will be available in
qemu 2.6.0.
As with pci-expander-bus (which uses qemu's pxb device), the busNr
attribute and <node> subelement of <target> are used to set the bus_nr
and numa_node options.
During post-parse we validate that the domain's machinetype is
q35-based (since the device shows up for 440fx-based machinetypes, but
is unusable), as well as checking that <node> specifies a node that is
actually configured on the guest.
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).
Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
The pxb device is a PCIe expander bus that can be added to any
Q35-based machinetype. A single PCIe port (*not* hotpluggable) is
provided; if more than one device is desired, or if hotplug
support is needed, either a pcie-root-port, or some combination of
pcie-switch-upstream-port and pcie-swith-downstream-ports must be
added to it. It can have a NUMA node number associated with it, as
well as a bus number.
This is backed by the qemu device "pxb".
The pxb device always includes a pci-bridge that is at the bus number
of the pxb + 1.
busNr and <node> from the <target> subelement are used to set the
bus_nr and numa_node options for pxb.
During post-parse we validate that the domain's machinetype is
440fx-based (since the pxb device only works on 440fx-based machines),
and <node> also gets a sanity check to assure that the NUMA node
specified for the pxb (if any - it's optional) actually exists on the
guest.
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.
The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).
Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
The pxb device is a PCI expander bus that can be added to any
440fx-based machinetype. The PCI bus that is created has 32 standard
PCI slots (hotpluggable). It can have a NUMA node number associated
with it, as well as a bus number.
When support for dmi-to-pci-bridge was added, it was assumed that,
just as with the pci-root bus, slot 0 was reserved. This is not the
case - it can be used to connect a device just like any other slot, so
remove the restriction and update the test cases that auto-assign an
address on a dmi-to-pci-bridge.
* Add a test for listen=XXX and <listen address=YYY/> collision error
* Add an explicit test for listen=XXX duplicated to <listen address=XXX/>
We implicitly test it elsewhere but I figure it's better to be explicit,
and this test case can be extended in the future for additional listen
back compat if/when we support <listen type='socket'/> syntax
In qemuHotplugCreateObjects, the ret variable was filled by
the value returned by qemuTestCapsCacheInsert.
If any of the functions after this assignment failed, we would still
return success.
Also adjust testCompareXMLToArgvHelper, where this change is just
cosmetic, because the value was overwritten right away.
Add codes to support creating domain with network defition of assigning
SRIOV VF from a pool.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The address assigning code might add new pci bridges.
We need them to have an alias when building the command line.
In real word usage, this is not a problem because all the code
paths already call qemuDomainAssignAddresses. However moving
this call lets us remove one extra call from qemuxml2argvtest.
It is only used for failed address allocation
Since we already have FLAG_EXPECT_FAILURE, use that instead.
Also unify the output to print the whole log buffer instead
of just the last error message.
After removing qemuBuildCommandLineCallbacks, testutilsqemu.h does not
need to include qemu_command.h.
Include just qemu_conf.h here and qemu_domain_address.h in files that
need it.
Essentially revert commit 3a6204c which added these to allow the test
suite to pass without depending on the host system state.
Since commit 4b527c1 we already mock virSCSIDeviceGetSgName, so these
callbacks are useless.
Commit 119cd06 started setting the primary bool for the first
user-specified video even if user omitted the 'primary' attribute.
However this was done before the addition of the implicit device.
This broke startup of transient qemu domains with no <video>:
https://bugzilla.redhat.com/show_bug.cgi?id=1325757
Move this default to virDomainDefPostParseInternal,
after the addition of the implicit video device, to catch the implicit
video as well.
Commit dc98a5bc refactored the code a lot and forget about checking if
listen attribute is specified. This ensures that listen attribute and
first listen element are compared only if both exist.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
After the test and qemu_process refactor now we can benefit from default
listen address for spice and vnc in tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Some places already check for "virt-" prefix as well as plain "virt".
virQEMUCapsHasPCIMultiBus did not, resulting in multiple PCI devices
having assigned the same unnumbered "pci" alias.
Add a test for the "virt-2.6" machine type which also omits the
<model type='virtio'/> in <interface>, to check if
qemuDomainDefaultNetModel works too.
https://bugzilla.redhat.com/show_bug.cgi?id=1325085
If the -object secret capability exists, then get the path to the
masterKey file and provide that to qemu. Checking for the existence
of the file before passing to qemu could be done, but causes issues
in mock test environment.
Since the qemuDomainObjPrivate is not available when building the
command line, the qemuBuildHasMasterKey API will have to suffice
as the primary arbiter for whether the capability exists in order
to find/return the path to the master key for usage.
Created the qemuDomainGetMasterKeyAlias API which will be used by
later patches to define the 'keyid' (eg, masterKey) to be used by
other secrets to provide the id to qemu for the master key.
Add a capability bit for the qemu secret object.
Adjust the 2.6.0-1 caps/replies to add the secret object. For the
.replies it's take from the '{"execute":"qom-list-types"}' output.
Commit d77ffb6876 added not only reporting of the PCI header type, but
also parsing of that information. However, because there was no parsing
done for the other sub-PCI capabilities, if there was any other
capability then a valid header type name (like phys_function or
virt_functions) the parsing would fail. This prevented passing node
device XMLs that we generated into our own functions when dealing with,
e.g. with SRIOV cards.
Instead of reworking the whole parsing, just fix this one occurence and
remove a test for it for the time being. Future patches will deal with
the rest.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
* tools/nss/libvirt_nss.[ch]: add BSD-comptabile wrappers and
register via the nss_module_register() interface
* m4/virt-nss.m4: add checks if we're building NSS for FreeBSD
* tools/Makefile.am: handle target library name differences, as
Linux needs libnss_libvirt.so.2 and FreeBSD needs
nss_libvirt.so.1. Also, different syms files have to be used
as Linux needs to export all the methods while FreeBSD
only needs to have nss_module_register()
* tests/nsstest.c, tests/nssmock.c: s/__linux__/NSS/
* tests/nssmock.c: pass int instead of mode_t to va_arg() to please
gcc 4.8
* libvirt_nss_bsd.syms: FreeBSD syms file
In some cases it's impractical to use the regular APIs as the bitmap
size needs to be pre-declared. These new APIs allow to use bitmaps that
self expand.
The new code adds a property to the bitmap to track the allocation of
memory so that VIR_RESIZE_N can be used.
It was too similar to the non-scaled alternative.
before:
error: Numeric value 'abc' for <size> option is malformed or out of range
after:
error: Scaled numeric value 'abc' for <size> option is malformed or out of range
This patch adds new xml element, and so we can have the option of
also having perf events enabled immediately at startup.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-6-git-send-email-qiaowei.ren@intel.com
