If you compile a client --without-polkit, and connect to a URI that needs
polkit auth, the connection will fail with:
$ ./tools/virsh --connect qemu+ssh://crobinso@machine/system
error: failed to connect to the hypervisor
error: authentication failed: unsupported authentication type 2
This is because the client side portion of the polkit handling is
compiled out. However, nothing polkit specific is actually required
of the client.
Fix that error by unconditionally compiling the basic polkit client
handling.
https://bugzilla.redhat.com/show_bug.cgi?id=635529
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Make register and unregister functions return void because
we can check the state of callback object beforehand via
virConnectCloseCallbackDataGetCallback. This can be done
without race conditions if we use higher level locks for registering
and unregistering. The fact they return void simplifies
task of consistent registering/unregistering.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Commit 8cd1d54 consolidates both daemon and remote driver typed param
serialization functions. The consolidation now enforces client to use
VIR_TYPED_PARAM_STRING_OKAY flag to properly serialize string parameters, which
server has used for quite some time now. And this caused an issue, since the
commit had not adjusted client remote calls appropriately, thus causing a
failure in blkiotune, numatune and migration APIs (as per Xen CI tests). This
patch adjusts both remote_driver.c and gendispatch.pl to properly address this
issue.
http://lists.xenproject.org/archives/html/xen-devel/2016-02/msg01012.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some of the protocol files already include handing of the missing int
types such as xdr_uint64_t, some don't. To fix it everywhere, move out
of the appropriate defines to the utils/virxdrdefs.h file and include
it where needed.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Well, in 8ad126e6 we tried to fix a memory corruption problem.
However, the fix was not as good as it could be. I mean, the
commit has one line more than it should. I've noticed this output
just recently:
# ./run valgrind --leak-check=full --show-reachable=yes ./tools/virsh domblklist gentoo
==17019== Memcheck, a memory error detector
==17019== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==17019== Using Valgrind-3.10.1 and LibVEX; rerun with -h for copyright info
==17019== Command: /home/zippy/work/libvirt/libvirt.git/tools/.libs/virsh domblklist gentoo
==17019==
Target Source
------------------------------------------------
fda /var/lib/libvirt/images/fd.img
vda /var/lib/libvirt/images/gentoo.qcow2
hdc /home/zippy/tmp/install-amd64-minimal-20150402.iso
==17019== Thread 2:
==17019== Invalid read of size 4
==17019== at 0x4EFF5B4: virObjectUnref (virobject.c:258)
==17019== by 0x5038CFF: remoteClientCloseFunc (remote_driver.c:552)
==17019== by 0x5069D57: virNetClientCloseLocked (virnetclient.c:685)
==17019== by 0x506C848: virNetClientIncomingEvent (virnetclient.c:1852)
==17019== by 0x5082136: virNetSocketEventHandle (virnetsocket.c:1913)
==17019== by 0x4ECD64E: virEventPollDispatchHandles (vireventpoll.c:509)
==17019== by 0x4ECDE02: virEventPollRunOnce (vireventpoll.c:658)
==17019== by 0x4ECBF00: virEventRunDefaultImpl (virevent.c:308)
==17019== by 0x130386: vshEventLoop (vsh.c:1864)
==17019== by 0x4F1EB07: virThreadHelper (virthread.c:206)
==17019== by 0xA8462D3: start_thread (in /lib64/libpthread-2.20.so)
==17019== by 0xAB441FC: clone (in /lib64/libc-2.20.so)
==17019== Address 0x139023f4 is 4 bytes inside a block of size 240 free'd
==17019== at 0x4C2B1F0: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==17019== by 0x4EA8949: virFree (viralloc.c:582)
==17019== by 0x4EFF6D0: virObjectUnref (virobject.c:273)
==17019== by 0x4FE74D6: virConnectClose (libvirt.c:1390)
==17019== by 0x13342A: virshDeinit (virsh.c:406)
==17019== by 0x134A37: main (virsh.c:950)
The problem is, when registering remoteClientCloseFunc(), it's
conn->closeCallback which is ref'd. But in the function itself
it's conn->closeCallback->conn what is unref'd. This is causing
imbalance in reference counting. Moreover, there's no need for
the remote driver to increase/decrease conn refcount since it's
not used anywhere. It's just merely passed to client registered
callback. And for that purpose it's correctly ref'd in
virConnectRegisterCloseCallback() and then unref'd in
virConnectUnregisterCloseCallback().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Also, among with this new API new ACL that restricts rename
capability is invented too.
Signed-off-by: Tomas Meszaros <exo@tty.sk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The remoteDomainOpenGraphicsFD method was using the wrong RPC
arg struct remote_domain_open_graphics_args instead of
remote_domain_open_graphics_fd_args. Fortunately both structs
had identical contents so there was no functional bug, but to
avoid confusing future maintainers, we should fix it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By default, getaddrinfo() will return addresses for both
IPv4 and IPv6 if both protocols are enabled, and so the
RPC code will listen/connect to both protocols too. There
may be cases where it is desirable to restrict this to
just one of the two protocols, so add an 'int family'
parameter to all the TCP related APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For setting passwords of users inside the domain.
With the VIR_DOMAIN_PASSWORD_ENCRYPTED flag set, the password
is assumed to be already encrypted by the method required
by the guest OS.
https://bugzilla.redhat.com/show_bug.cgi?id=1174177
Not all NICs (esp. the virtual ones like TUN) must have a hardware
address. Teach our RPC that it's possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
daemon/remote.c
* Define remoteSerializeDomainInterface, remoteDispatchDomainInterfaceAddresses
src/remote/remote_driver.c
* Define remoteDomainInterfaceAddresses
src/remote/remote_protocol.x
* New RPC procedure: REMOTE_PROC_DOMAIN_INTERFACE_ADDRESSES
* Define structs remote_domain_ip_addr, remote_domain_interface,
remote_domain_interfaces_addresse_args, remote_domain_interface_addresses_ret
* Introduce upper bounds (to handle DoS attacks):
REMOTE_DOMAIN_INTERFACE_MAX = 2048
REMOTE_DOMAIN_IP_ADDR_MAX = 2048
Restrictions on the maximum number of aliases per interface were
removed after kernel v2.0, and theoretically, at present, there
are no upper limits on number of interfaces per virtual machine
and on the number of IP addresses per interface.
src/remote_protocol-structs
* New structs added
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Not all files we want to find using virFileFindResource{,Full} are
generated when libvirt is built, some of them (such as RNG schemas) are
distributed with sources. The current API was not able to find source
files if libvirt was built in VPATH.
Both RNG schemas and cpu_map.xml are distributed in source tarball.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A bunch of code is wrapped in #if WITH_LIBVIRTD in order to
enable the virStateDriver to be disabled when libvirtd is not
built. Disabling this code doesn't have any real functional
benefit beyond removing 1 pointer from the virConnectPtr struct,
while having a cost of many more conditionals.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The ACL check didn't check the VIR_DOMAIN_XML_SECURE flag and the
appropriate permission for it. Found via code inspection while fixing
permissions for save images.
The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.
Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
