The block job event handler qemuProcessHandleBlockJob looks at the block
job data to see whether the job requires synchronous handling. Since the
block job event may arrive before we continue the job handling (if the
job has no data to copy) we could hit the state when the job is still
set as QEMU_BLOCKJOB_STATE_NEW (as we move it to the
QEMU_BLOCKJOB_STATE_RUNNING state only after returning from monitor).
If the event handler uses qemuBlockJobStartupFinalize it would
unregister and free the job. Thankfully this is not a big problem for
legacy blockjobs as we don't need much data for them but since we'd
re-instantiate the job data structure we'd report wrong job type for
active commit as qemu reports it as a regular commit job.
Fix it by not using qemuBlockJobStartupFinalize function in
qemuProcessHandleBlockJob as it is not starting the job anyways.
https://bugzilla.redhat.com/show_bug.cgi?id=1721375
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virCgroupRemove return -1 when removing cgroup failed.
But there are retry code to remove cgroup in QemuProcessStop:
retry:
if ((ret = qemuRemoveCgroup(vm)) < 0) {
if (ret == -EBUSY && (retries++ < 5)) {
usleep(200*1000);
goto retry;
}
VIR_WARN("Failed to remove cgroup for %s",
vm->def->name);
}
The return value of qemuRemoveCgroup will never be equal to "-EBUSY",
so change the return value of virCgroupRemove if failed.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Shutting down the daemon after 30 seconds of being idle is a little bit
too aggressive. Especially when using 'virsh' in single-shot mode, as
opposed to interactive shell mode, it would not be unusual to have
more than 30 seconds between commands. This will lead to the daemon
shutting down and starting up between a series of commands.
Increasing the shutdown timer to 2 minutes will make it less likely that
the daemon will shutdown while the user is in the middle of a series of
commands.
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of having each caller pass in the desired logfile name, pass in
the binary name instead. The logging code can then just derive a logfile
name by appending ".log".
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This adds detection of a Quobyte as a shared file system for live
migration.
Signed-off-by: Silvan Kaiser <silvan@quobyte.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have two functions: virPCIDeviceAddressIsEqual() defined only
on Linux and virPCIDeviceAddressEqual() defined everywhere. And
both of them do the same. Drop the former in favour of the
latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit 5ff46aaa7f added a new parameter but neglected to fix the NONNULL
declarations.
Reported-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When removing the disk fronted while any block job is still active we
need to transfer the ownership of the backing chain to the job itself as
the job still holds the reference to the chain members and thus attempts
to remove them would fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In cases when the disk frontend was unplugged while a blockjob was
running the blockjob inherits the backing chain. When the blockjob is
then terminated we need to unplug the chain as it will not be used any
more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The PR manager is a property of the format layer in qemu so we need to
be able to track it also in the chains of orphaned block jobs.
Add a helper for qemu to look also into the blockjob state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When the guest unplugs the disk frontend libvirt is responsible for
deleting the backend. Since a blockjob may still have a reference to the
backing chain when it is running we'll have to store the metadata for
the unplugged disk for future reference.
This patch adds 'chain' and 'mirrorChain' fields to 'qemuBlockJobData'
to keep them around with the job along with status XML machinery and
tests. Later patches will then add code to change the ownership of the
chain when unplugging the disk backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Refresh the state of the jobs and process any events that might have
happened while libvirt was not running.
The job state processing requires some care to figure out if a job
needs to be bumped.
For any invalid job try doing our best to cancel it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the infrastructure to handle block job events in the -blockdev era.
Some complexity is required as qemu does not bother to notify whether
the job was concluded successfully or failed. Thus it's necessary to
re-query the monitor.
To minimize the possibility of stuck jobs save the state into the XML
prior to handling everything so that the reconnect code can potentially
continue with the cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for handling the event either synchronously or
asynchronously using the event thread.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we'll need to use the JOB_STATUS_CHANGE so gate the old
events by the blockdev capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new state is entered when qemu finished the job but libvirt does
not know whether it was successful or not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the blockjob handling code deals with the status XML we don't
need to save it explicitly when starting blockjobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that block job data is stored in the status XML portion we need to
make sure that everything which changes the state also saves the status
XML. The job registering function is used while parsing the status XML
so in that case we need to skip the XML saving.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to store the block job state in the status XML so that we can
properly recover any data when reconnecting after startup and also in
the end to be able to do any transition of the backing chain that
happened while libvirt was not connected to the monitor.
First step is to note the name, type, state and corresponding disk into
the status XML.
We also need to make sure that a broken blockjob does not make libvirt
lose the VM, thus many of the errors just mark the job as invalid.
Later on we'll cancel all invalid jobs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The job data saved in the XML may be partially invalid e.g. if something
is missing. To prevent losing a domain with such a job add a flag to the
job data so that job APIs can ignore such a job and we can just cancel
it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When parsing the status XML we need to register all existing jobs.
Export the functions so that they are usable in other modules.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Later on we'll format these values into the status XML so the from/to
string functions will come handy. The implementation also notes that
these will be used in the status XML to avoid somebody changing the
values.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the job structure to the table when instantiating a new job and
remove it when it terminates/fails.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block jobs currently belong to disks only so we can look up the block
job data for them in the corresponding disks. This won't be the case
when using blockdev as certain jobs don't even correspond to a disk and
most of them can run on a part of the backing chain.
Add a global table of blockjobs which can be used to look up the data
for the blockjobs when the job events need to be processed.
The table is a hash table organized by job name and has a reference to
the job. New and running jobs will later be added to this table.
Reference counting will allow to reap job state for synchronous callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The legacy job handler does not look at the old job state so we can
update it earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to do it if the job is not completed. The new helper
allows to do this with much less hassle in the correct place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename and move qemuBlockJobTerminate to qemuBlockJobUnregister and
separate bits from qemuBlockJobDiskNew which register the job with the
disk. This creates an unified interface for other APIs to use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to qemuDomainSaveStatus add a helper to save the config XML
named qemuDomainSaveConfig.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuDomainObjSaveJob and create a wrapper for it which does not
require 'driver' to be passed and export it so that other palces can
easily save the status XML without having to invoke virDomainSaveStatus
which has unpleasing parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test the output against the schema and also against what we expect.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tests will need to parse such a definition so it also needs to be freed.
Provide a function for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU allows us to create storage on certain network protocols which
allow image creation through their API. Wire up the generator for using
it with libvirt as well as for local files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'blockdev-add' allows us to use qemu to format images to our desired
format. This patch implements helpers which convert a
virStorageSourcePtr into JSON objects describing the required
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow using -blockdev with blockjobs QEMU needs to reopen files in
read-write mode when modifying the backing chain. To achieve this we
need to use 'auto-read-only' for the backing files rather than the
normal 'read-only' property. That way qemu knows that the files need to
be reopened.
Note that the format drivers (e.g. qcow2) are still opened with the
read-only property enabled when being a member of the backing chain
since they are supposed to be immutable unless a block job is started.
QEMU v4.0 (since commit 23dece19da4) allows also dynamic behaviour for
auto-read-only which allows us to use sVirt as we only grant write
permissions to files when doing a blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow reusing the formatters in the code for creating JSON properties
for 'blockdev-create' we need to create everything except the 'driver'
attribute.
Use the new helper virJSONValueObjectPrependString to put the driver at
the same place so that we don't change any output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Libvirt treats the JSON objects as lists thus the values appear in the
order they were added. To avoid too much changes introduce a helper
which allows to prepend a string which will allow to keep certain
outputs in order.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add testing of the host specification part so that we can be sure that
no image/host specific data will be present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting new qcow2 images we need to provide the backing store
string which should not contain any authentication or irrelevant data.
Add a flag for qemuBlockStorageSourceGetBackendProps which allows to
skip the irrelevant data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'blockdev-create' starts a job which creates a storage volume using
the given protocol or formats an existing (added) volume with one of the
supported storage formats.
This patch adds the monitor interaction bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new event is a superset of the BLOCK_JOB* events and also covers
jobs which don't bind to a VM disk.
In this patch the monitor part is implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
