We can properly track the job type when starting the job so that we
don't have to infer it later.
This patch also adds an enum of block job types specific to qemu
(qemuBlockjobType) which mirrors the public block job types
(virDomainBlockJobType) but allows for other types to be added later
which will not be public.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than directly modifying fields in the qemuBlockJobDataPtr
structure add a bunch of fields which allow to do the transitions.
This will help later when adding more complexity to the job handling.
APIs introduced in this patch are:
qemuBlockJobDiskNew - prepare for starting a new blockjob on a disk
qemuBlockJobDiskGetJob - get the block job data structure for a disk
For individual job state manipulation the following APIs are added:
qemuBlockJobStarted - Sets the job as started with qemu. Until that
the job can be cancelled without asking qemu.
qemuBlockJobStartupFinalize - finalize job startup. If the job was
started in qemu already, just releases
reference to the job object. Otherwise
clears everything as if the job was never
started.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The field is used to note the state the job has transitioned to while
handling the blockjob state change event. Rename the field so that it's
obvious that this is the new state and not the general state of the
blockjob.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Block job state was widely untracked by libvirt across restarts which
was allowed by a stateless block job finishing handler which discarded
disk state and redetected it. This is undesirable since we'll need to
track more information for individual blockjobs due to -blockdev
integration requirements.
In case of legacy blockjobs we can recover whether the job is present at
reconnect time by querying qemu. Adding tracking whether a job is
present will allow simplification of the non-shared-storage cancellation
code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'cleanup' label was accessed only from a jump to 'error'. Consolidate
everyting into 'cleanup'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Struct qemuDomainDiskPrivate was holding multiple variables connected to
a disk block job. Consolidate them into a new struct qemuBlockJobData.
This will also allow simpler extensions to the block job mechanisms.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the previous commit we are using uint64_t for storing subnet
prefix and interface id that qemu reports in
RDMA_GID_STATUS_CHANGED event. We also report them in some debug
messages. This poses a problem because uint64_t can be UL or ULL
depending on the host architecture and hence we wouldn't know
which format to use. Switch to ULL which is big enough and
doesn't suffer from the issue.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This event is emitted on the monitor when a GID table in pvrdma device
is modified and the change needs to be propagate to the backend RDMA
device's GID table.
The control over the RDMA device's GID table is done by updating the
device's Ethernet function addresses.
Usually the first GID entry is determine by the MAC address, the second
by the first IPv6 address and the third by the IPv4 address. Other
entries can be added by adding more IP addresses. The opposite is the
same, i.e. whenever an address is removed, the corresponding GID entry
is removed.
The process is done by the network and RDMA stacks. Whenever an address
is added the ib_core driver is notified and calls the device driver's
add_gid function which in turn update the device.
To support this in pvrdma device we need to hook into the create_bind
and destroy_bind HW commands triggered by pvrdma driver in guest.
Whenever a changed is made to the pvrdma device's GID table a special
QMP messages is sent to be processed by libvirt to update the address of
the backend Ethernet device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Before launching a SEV guest we take the base64-encoded guest owner's
data specified in launchSecurity and create files with the same content
under /var/lib/libvirt/qemu/<domain>. The reason for this is that we
need to pass these files on to QEMU which then uses them to communicate
with the SEV firmware, except when it doesn't have permissions to open
those files since we don't relabel them.
https://bugzilla.redhat.com/show_bug.cgi?id=1658112
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Since SEV operates on a per domain basis, it's very likely that all
SEV launch-related data will be created under
/var/lib/libvirt/qemu/<domain_name>. Therefore, when calling into
qemuProcessSEVCreateFile we can assume @libDir as the directory prefix
rather than passing it explicitly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Because missing optional storage source is not error. The patch
address only local files. Fixing other cases is a bit ugly.
Below is example of error notice in log now:
error: virStorageFileReportBrokenChain:427 :
Cannot access storage file '/path/to/missing/optional/disk':
No such file or directory
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The QEMU command line arguments are very long and currently all written
on a single line to /var/log/libvirt/qemu/$GUEST.log. This introduces
logic to add line breaks after every env variable and "-" optional
argument, and every positional argument. This will create a clearer log
file, which will in turn present better in bug reports when people cut +
paste from the log into a bug comment.
An example log file entry now looks like this:
2018-12-14 12:57:03.677+0000: starting up libvirt version: 5.0.0, qemu version: 3.0.0qemu-3.0.0-1.fc29, kernel: 4.19.5-300.fc29.x86_64, hostname: localhost.localdomain
LC_ALL=C \
PATH=/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin \
HOME=/home/berrange \
USER=berrange \
LOGNAME=berrange \
QEMU_AUDIO_DRV=none \
/usr/bin/qemu-system-ppc64 \
-name guest=guest,debug-threads=on \
-S \
-object secret,id=masterKey0,format=raw,file=/home/berrange/.config/libvirt/qemu/lib/domain-33-guest/master-key.aes \
-machine pseries-2.10,accel=tcg,usb=off,dump-guest-core=off \
-m 1024 \
-realtime mlock=off \
-smp 1,sockets=1,cores=1,threads=1 \
-uuid c8a74977-ab18-41d0-ae3b-4041c7fffbcd \
-display none \
-no-user-config \
-nodefaults \
-chardev socket,id=charmonitor,fd=23,server,nowait \
-mon chardev=charmonitor,id=monitor,mode=control \
-rtc base=utc \
-no-shutdown \
-boot strict=on \
-device qemu-xhci,id=usb,bus=pci.0,addr=0x1 \
-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x2 \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,resourcecontrol=deny \
-msg timestamp=on
2018-12-14 12:57:03.730+0000: shutting down, reason=failed
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This introduces a syntax-check script that validates header files use a
common layout:
/*
...copyright header...
*/
<one blank line>
#ifndef SYMBOL
# define SYMBOL
....content....
#endif /* SYMBOL */
For any file ending priv.h, before the #ifndef, we will require a
guard to prevent bogus imports:
#ifndef SYMBOL_ALLOW
# error ....
#endif /* SYMBOL_ALLOW */
<one blank line>
The many mistakes this script identifies are then fixed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Unlike with SPICE and SDL which use the <gl> subelement to enable OpenGL
acceleration, specifying egl-headless graphics in the XML has
essentially the same meaning, thus in case of egl-headless we don't have
a need for the 'enable' element attribute and we'll only be interested
in the 'rendernode' one further down the road.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Up until now, we formatted 'rendernode=' onto QEMU cmdline only if the
user specified it in the XML, otherwise we let QEMU do it for us. This
causes permission issues because by default the /dev/dri/renderDX
permissions are as follows:
crw-rw----. 1 root video
There's literally no reason why it shouldn't be libvirt picking the DRM
render node instead of QEMU, that way (and because we're using
namespaces by default), we can safely relabel the device within the
namespace.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Post-copy migration has been broken on the source since commit
v3.8.0-245-g32c29f10db which implemented support for
pause-before-switchover QEMU migration capability.
Even though the migration itself went well, the source did not really
know when it switched to the post-copy mode despite the messages logged
by MIGRATION event handler. As a result of this, the events emitted by
source libvirtd were not accurate and statistics of the completed
migration would cover only the pre-copy part of migration. Moreover, if
migration failed during the post-copy phase for some reason, the source
libvirtd would just happily resume the domain, which could lead to disk
corruption.
With the pause-before-switchover capability enabled, the order of events
emitted by QEMU changed:
pause-before-switchover
disabled enabled
MIGRATION, postcopy-active STOP
STOP MIGRATION, pre-switchover
MIGRATION, postcopy-active
The STOP even handler checks the migration status (postcopy-active) and
sets the domain state accordingly. Which is sufficient when
pause-before-switchover is disabled, but once we enable it, the
migration status is still active when we get STOP from QEMU. Thus the
domain state set in the STOP handler has to be corrected once we are
notified that migration changed to postcopy-active.
This results in two SUSPENDED events to be emitted by the source
libvirtd during post-copy migration. The first one with
VIR_DOMAIN_EVENT_SUSPENDED_MIGRATED detail, while the second one reports
the corrected VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY detail. This is
inevitable because we don't know whether migration will eventually
switch to post-copy at the time we emit the first event.
https://bugzilla.redhat.com/show_bug.cgi?id=1647365
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For metadata locking we might need an extra fork() which given
latest attempts to do fewer fork()-s is suboptimal. Therefore,
there will be a qemu.conf knob to {en|dis}able this feature. But
since the feature is actually not metadata locking itself rather
than remembering of the original owner of the file this is named
as 'rememberOwner'. But patches for that feature are not even
posted yet so there is actually no qemu.conf entry in this patch
nor a way to enable this feature.
Even though this is effectively a dead code for now it is still
desired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The TPM code currently accepts pointer to a domain definition.
This is okay for now, but in near future the security driver APIs
it calls will require domain object. Therefore, change the TPM
code to accept the domain object pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit ("qemu_domain.c: moving maxCpu validation to
qemuDomainDefValidate") shortened the code of qemuProcessStartValidateXML.
The function is called only by qemuProcessStartValidate, in the
same file, and its code is now a single check that calls virDomainDefValidate.
Instead of leaving a function call just to execute a single check,
this patch puts the check in the body of qemuProcessStartValidate in the
place where qemuProcessStartValidateXML was being called. The function can
now be removed.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Previous patch removed the call to qemuProcessValidateCpuCount
from qemuProcessStartValidateXML, in qemu_process.c. The only
caller left is qemuDomainDefValidate, in qemu_domain.c.
Instead of having a public function declared inside qemu_process.c
that isn't used in that file, this patch moves the function to
qemu_domain.c, making in static and renaming it to
qemuDomainValidateCpuCount to be compliant with other static
functions names in the file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding maxCpu validation in qemuDomainDefValidate allows the user to
spot over the board maxCpus counts at editing time, instead of
facing a runtime error when starting the domain. This check is also
arch independent.
This leaves us with 2 calls to qemuProcessValidateCpuCount: one in
qemuProcessStartValidateXML and the new one at qemuDomainDefValidate.
The call in qemuProcessStartValidateXML is redundant. Following
up in that code, there is a call to virDomainDefValidate, which
in turn will call config.domainValidateCallback. In this case, the
callback function is qemuDomainDefValidate. This means that, on startup
time, qemuProcessValidateCpuCount will be called twice.
To avoid that, let's also remove the qemuProcessValidateCpuCount call
from qemuProcessStartValidateXML.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuValidateCpuCount validates the maxCpus value of a domain at
startup time, preventing it to start if the value exceeds a maximum.
This checking is also done at qemu_domain.c, qemuDomainDefValidate.
However, it is done only for x86 (and even then, in a specific
scenario). We want this check to be done for all archs.
To accomplish this, let's first make qemuValidateCpuCount public so
it can be used inside qemuDomainDefValidate. The function was renamed
to qemuProcessValidateCpuCount to be compliant with the other public
methods at qemu_process.h. The method signature was slightly adapted
to fit the const 'def' variable used in qemuDomainDefValidate. This
change has no downside in in its original usage at
qemuProcessStartValidateXML.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Adding the maxCpus value in the error message of qemuValidateCpuCount
allows the user to set an acceptable maxCpus count without knowing
QEMU internals.
x86 guests, that might have been created prior to the x86
qemuDomainDefValidate maxCpus check code (that validates the maxCpus value
in editing time), will also benefit from this change.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Support Hyper-V Enlightened VMCS in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_EVMCS
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
QEMU 3.1 supports Hyper-V-style PV IPIs making it cheaper for Windows
guests to send an IPI, especially when it targets many CPUs.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Support Hyper-V PV IPI enlightenment in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_IPI
cases to src/qemu/* for now.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1631622
If polkit authentication is enabled, an attempt to open
the connection failed during virAccessDriverPolkitGetCaller
when the call to virIdentityGetCurrent returned NULL resulting
in the errors:
virAccessDriverPolkitGetCaller:87 : access denied:
Policy kit denied action org.libvirt.api.connect.getattr from <anonymous>
Because qemuProcessReconnect runs in a thread during
daemonRunStateInit processing it doesn't have the thread
local identity. Thus when the virGetConnectNWFilter is
called as part of the qemuProcessFiltersInstantiate when
virDomainConfNWFilterInstantiate is run the attempt to get
the idenity fails and results in the anonymous error above.
To fix this, let's grab/use the virIdenityPtr of the process
that will be creating the thread, e.g. what daemonRunStateInit
has set and use that for our thread. That way any other similar
processing that uses/requires an identity for any other call
that would have previously been successfully run won't fail in
a similar manner.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add functions for creating, destroying, reconnecting resctrl
monitor in qemu according to the configuration in domain XML.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.
This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The gotShutdown bool has been redundant since we started setting
VIR_DOMAIN_SHUTDOWN state after receiving SHUTDOWN event from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If gotShutdown is true, the domain state cannot be running because of
the following code in qemuProcessHandleShutdown:
priv->gotShutdown = true;
VIR_DEBUG("Transitioned guest %s to shutdown state",
vm->def->name);
virDomainObjSetState(vm,
VIR_DOMAIN_SHUTDOWN,
VIR_DOMAIN_SHUTDOWN_UNKNOWN);
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Since commit v4.7.0-302-ge6d77a75c4 processing RESUME event is mandatory
for updating domain state. But the event handler explicitly ignored this
event in some cases. Thus the state would be wrong after a fake reboot
or when a domain was rebooted after it crashed.
BTW, the code to ignore RESUME event after SHUTDOWN didn't make sense
even before making RESUME event mandatory. Most likely it was there as a
result of careless copy&paste from qemuProcessHandleStop.
The corresponding debug message was clarified since the original state
does not have to be "paused" only and while we have a "resumed" event,
the state is called "running".
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The current qemuProcessReconnect logic paints a broad brush
determining that the shutdown reason must be crashed if it was
determined that the domain was started with -no-shutdown; however,
there's many other ways to get to the error label, so let's narrow
our reasoning window for using VIR_DOMAIN_SHUTOFF_CRASHED to the
period where we essentially know we've tried to create to the
monitor and before we were successful in opening the connection.
Failures that occur outside that window would thus be considered
as VIR_DOMAIN_SHUTOFF_UNKNOWN, at least for now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When qemuProcessReconnectHelper was introduced (commit d38897a5d)
reconnection failure used VIR_DOMAIN_SHUTOFF_FAILED; however, that
was changed in commit bda2f17d to either VIR_DOMAIN_SHUTOFF_CRASHED
or VIR_DOMAIN_SHUTOFF_UNKNOWN.
When QEMU_CAPS_NO_SHUTDOWN checking was removed in commit fe35b1ad6
the conditional state was just left at VIR_DOMAIN_SHUTOFF_CRASHED.
So introduce qemuDomainIsUsingNoShutdown which will manage the
condition when the domain was started with -no-shutdown so that
when/if reconnection failure occurs we can restore the decision
point used to determine whether CRASHED or UNKNOWN is provided.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
IOThread pids info will lost after libvirtd restart, then
if we call pinIOThread, sched_setaffinity will be called with
pid 0, not IOThread pid. So pinIOThread cannot work normally.
Signed-off-by: Jie Wang <wangjie88.huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The QEMU @cfg config variable is unused in context of qemuProcessInit,
let's drop it.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This function updates the used QEMU capabilities of @vm by querying
the QEMU capabilities cache.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only place where VIR_DOMAIN_EVENT_RESUMED should be generated is the
RESUME event handler to make sure we don't generate duplicate events or
state changes. In the worse case the duplicity can revert or cover
changes done by other event handlers.
For example, after QEMU sent RESUME, BLOCK_IO_ERROR, and STOP events
we could happily mark the domain as running and report
VIR_DOMAIN_EVENT_RESUMED to registered clients.
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Thanks to the previous commit the RESUME event handler knows what reason
should be used when changing the domain state to VIR_DOMAIN_RUNNING, but
the emitted VIR_DOMAIN_EVENT_RESUMED event still uses a generic
VIR_DOMAIN_EVENT_RESUMED_UNPAUSED detail. Luckily, the event detail can
be easily deduced from the running reason, which saves us from having to
pass one more value to the handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Whenever we get the RESUME event from QEMU, we change the state of the
affected domain to VIR_DOMAIN_RUNNING with VIR_DOMAIN_RUNNING_UNPAUSED
reason. This is fine if the domain is resumed unexpectedly, but when we
sent "cont" to QEMU we usually have a better reason for the state
change. The better reason is used in qemuProcessStartCPUs which also
sets the domain state to running if qemuMonitorStartCPUs reports
success. Thus we may end up with two state updates in a row, but the
final reason is correct.
This patch is a preparation for dropping the state change done in
qemuMonitorStartCPUs for which we need to pass the actual running reason
to the RESUME event handler and use it there instead of
VIR_DOMAIN_RUNNING_UNPAUSED.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch replaces some rather generic VIR_DOMAIN_RUNNING_UNPAUSED
reasons when changing domain state to running with more specific ones.
All of them are done when libvirtd reconnects to an existing domain
after being restarted and sees an unfinished migration or save.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In a following case:
virsh start $domain
service libvirtd stop
<shutdown> the guest from within the $domain
service libvirtd start
Notice that PCI devices which have been assigned to the $domain will
still be bound to stub drivers instead rebound to host drivers.
In that case the call stack is like below:
libvirtd start
qemuProcessReconnect
qemuProcessStop (because $domain was shutdown without
libvirtd event to process that)
qemuHostdevReAttachDomainDevices
qemuHostdevReAttachPCIDevices
virHostdevReAttachPCIDevices
However, because qemuHostdevUpdateActiveDomainDevices was called
after the qemuConnectMonitor, the setup of the tracking of each
host device in the $domain on either the activePCIHostdevs list
or inactivePCIHostdev list will not occur in an orderly manner.
Therefore, virHostdevReAttachPCIDevices just neglects these host PCI
devices which are bound to stub drivers and doesn't rebind them to
host drivers.
This patch fixs that by moving qemuHostdevUpdateActiveDomainDevices before
qemuConnectMonitor during libvirtd reconnection processing.
Signed-off-by: Wu Zongyong <cordius.wu@huawei.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the new qemuDomainRemoveInactiveJobLocked to remove the
@obj during the virDomainObjListForEach call which holds a
lock on the domain object list.
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Reviewed-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1607202
It's essentially stated in the nwfilterBindingDelete that we
will allow the admin to shoot themselves in the foot by deleting
the nwfilter binding which then allows them to undefine the
nwfilter that is in use for the running guest...
However, by allowing this we cause a problem for libvirtd
restart reconnect processing which would then try to recreate
the missing binding attempting to use the deleted filter
resulting in an error and thus shutting the guest down.
So rather than keep adding virDomainConfNWFilterInstantiate
flags to "ignore" specific error conditions, modify the logic
to ignore, but VIR_WARN errors other than ignoreExists. This
will at least allow the guest to not shutdown for only nwfilter
binding errors that we can now perhaps recover from since we
have the binding create/delete capability.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
