We should have this check even if FORCE flag is used because later we
unconditionally copy the `snap->def->dom` and error out if there is no
copy created. The test driver will always save the VM XML when creating
new snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will always happen so there is no need to error out and require
usage of FORCE flag.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we always restart the QEMU process events are emitted
differently so we need to update the code and the comment as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now that we always restart QEMU process the loadvm code is unused and
can be dropped.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Our compatibility check code isn't complete and there are cases where it
fails to detect incompatible configuration and the revert fails. In
addition future support for external snapshot will always require
restarting the QEMU process.
To unify the behavior drop the compatibility check code and always
restart the QEMU process.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The support to revert snapshots was introduced in libvirt 0.8.0 but
saving the whole VM XML was implemented later in libvirt 0.9.5.
That is more then 10 years ago so we can safely assume that nobody will
try reverting to snapshot created by that old libvirt. In the unlikely
scenario where someone would actually did it we would simply error out.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Git bisect took me to commit where incorrect usage of ATTRIBUTE_NONNULL
was introduced and caused coverity scan to fail. This patch fixes the
issue where the index starts from 1 and not 0 and two other different
cases.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We currently use -machine accel=XXX which is just a syntax sugar
for -accel XXX. The former doesn't allow specifying arguments for
accelerator, because all arguments passed to -machine are
treated as arguments of machine itself.
The -accel argument was introduced in QEMU commit
v2.9.0-rc0~70^2~19 and since our minimum required version is
newer (2.11.0) we can safely assume its existence and use it
without any capability.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/233
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The domain accelerator was validated in qemuValidateDomainDef()
which calls virQEMUCapsIsVirtTypeSupported() which reports proper
error if QEMU is not capable of KVM/TCG. There is no point in
doing the validation again when building command line.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use 'virJSONValueObjectAdd' instead of the step-by-step manual JSON
object building.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When formatting the commandline we explicitly set the reconnect timeout
to 0 when it's disabled even when that's the default. Do the same in
the monitor/hotplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename 'data' to 'backendData' so that it's more clear what the object
represents and 'backend_type' to 'backendType' to go with the common
camel case notation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In some cases we have a label that contains nothing but a return
statement. The amount of such labels rises as we use automagic
cleanup. Anyway, such labels are pointless and can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When guest has NUMA nodes and QEMU is new enough to report
default RAM ID then ideally we would use -numa memdev= combined
with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa
mem are deprecated. Well, there is one problem - the .memdev=
attribute is machine type dependent (just look at arguments of
virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards
compatibility we prefer -numa mem= over -numa memdev=.
But there was one corner case when -mem-prealloc was requested
but not generated on the cmd line. It all starts with
qemuBuildMemCommandLine() which generates just '-m XXX' and
because it sees defaultRAMid and guest NUMA nodes greater than
zero it does nothing more.
Then, qemuBuildNumaCommandLine() sees that -numa mem= is still
supported for given machine type and nothing else set
@needBackend thus qemuBuildMemPathStr() is called which output
-mem-prealloc only in a few cases assuming it was outputted
earlier.
Reported-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This test shows a bug we have: even though the XML says:
<allocation mode='immediate'/>
there is no -mem-prealloc nor .prealloc=yes anywhere on the cmd
line. This will be fixed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Create extra g_autofree strings and use them in an adequate scope to
eliminate the need for VIR_FREE() calls and the 'cleanup' label.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
ppc64Compute() is used only once, by virCPUppc64Compare(), which
doesn't use the 'guest' parameter. It was last used by an API
called 'cpuGuestData' that was dropped by commit 03fa904c0c.
Removing the 'guest' parameter will not only remove unused code from
ppc64Compute() but also remove the ppc64MakeCPUData() entirely.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'str' is no longer being used and the 'cleanup' label can be removed
together with the 'ret' variable.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the arch validation logic from the
body of virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the emulator validation logic from the
body of virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the GIC parse logic from the body of
virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Create a new helper to remove the parse capabilities flag logic from the
body of virQEMUCapsLoadCache().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The content of /sys/module/kvm_amd/parameters/sev may vary depending on
the kernel version. Check also for 'Y' and 'y' in addition to '1' to
cover several possible variants. The fix is similar to the one
introduced in commit 3f9c1a4bb8
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 114e3b4232 added matching by
aliases for interfaces with same MAC address.
( https://bugzilla.redhat.com/show_bug.cgi?id=1926190 )
However, unless the domain is using user aliases (prefixed ua-),
there are no aliases in the persistent definition.
Only match by MAC/PCI/other addresses in that case, to fix update-device
with --persistent flag (AFFECT_LIVE | AFFECT_CONFIG).
https://bugzilla.redhat.com/show_bug.cgi?id=2024098
Fixes: 114e3b4232
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Originally the default encryption engine is populated in the disk
post-parse callback code. This works for disks but for any additional
images introduced either via the block copy API or via the backup API we
don't populate the default.
In case when the backup or block copy is requested on an encrypted image
this would then lead to an error:
error: internal error: Unexpected enum value 0 for virStorageEncryptionEngine
This patch adds another point where we populate the default which is
when setting up a virStorageSource for actual usage.
We keep the original setting in the post-parse callback as that's the
only point that is recorded in the XML file after definition.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2023674
Fixes: ab1d46d612
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case where 'ramfb' is explicitly disabled for a mediated
device to prevent regressing again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Before commit 73c352ab8c which converted the hostdev commandline
formatter to JSON the 'ramfb' property was formatted only if it was
enabled.
The main reason for that is that enabling 'ramfb' switches the device
model to 'vfio-pci-nohotplug' which actually has the property, while
'vfio-pci' (used when 'ramfb' is disabled or absent) doesn't have it.
Restore the logic to format 'ramfb' only when it's enabled and add a
comment that it's deliberate.
Fixes: 73c352ab8c
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024435
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test filled the chardev type to VIR_DOMAIN_CHR_TYPE_FILE and thus
set the 'data.emulator.source->data.file.path' pointer, but the
commandline formatter is unconditionally expecting VIR_DOMAIN_CHR_TYPE_UNIX
and thus reading 'data.emulator.source->data.nix.path'. Since it's an
union it happened to land in the correct place. Fix the faked data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainChrSourceDef' contains private data so 'virDomainChrSourceDefNew'
must be used to allocate it. 'virDomainTPMDef' was using it directly
which won't work with the chardev helper functions.
Convert it to a pointer to properly allocate private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's referenced only once and it's a shortcut to the chardev source thus
can be used directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than returning a different error code if the device address needs
to be released pass in the 'need_release' flag via a pointer.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is already getting 'virDomainObj' which has already the
driver pointer present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to automatic memory clearing for the two virJSONValues and remove
the 'cleanup' label and 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main reason is to ensure that the private data are properly
allocated for every instance.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is already returning JSON properties, rename it
accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'virReportEnumRangeError' for the invalid cases and keep the
original error for known but unsupported chardevs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the addition of the command wrapper to qemuMonitorJSONAttachCharDev
and rename the function to qemuMonitorJSONAttachCharDevGetProps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use 'qemuMonitorJSONMakeCommandInternal' instead of
'qemuMonitorJSONMakeCommand' + 'virJSONValueObjectAppend'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a simple wrapper for 'qemuMonitorAttachCharDev' named
'qemuHotplugChardevAttach' which will simplify the moving of the
character device property generator out of the monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'xmlopt' parameter can be auto-unref by using g_autoptr().
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will enable code cleanups on code that still relies on
virObjectUnref() this pointer manually.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
x86Compute() is a static function called only by virCPUx86Compare()
which passes NULL to the 'guest' parameter of x86Compute().
The last caller of x86Compute() that used it with 'guest' != NULL
was an API called 'cpuGuestData'. This API was dropped by commit
03fa904c0c a few years ago. Since then all callers of x86Compute()
uses it with 'guest' = NULL.
Removing the 'guest' parameter allow us to remove a good chunk of
logic that isn't being used for awhile.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is no guarantee that QEMU and libvirt have been configured
with the same prefix.
In particular, Homebrew on macOS will pass a different, private
prefix for each package version and then use symlinks to make
the files for a specific version appear in the usual locations.
This works perfectly fine as long as one package doesn't try to
go poking around another package's data - which is exactly what
libvirt needs to do in order to read and parse the QEMU interop
data.
qemu_datadir can now be explicitly provided to make this and
other uncommon scenarios work. The common scenario, where QEMU
and libvirt both use the same prefix, is unaffected.
https://gitlab.com/libvirt/libvirt/-/issues/168
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use abstract names that more closely match the Meson
nomenclature.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While datadir must live under prefix, there is no requirement
that its name must necessarily be "share": a different,
arbitrary name could have been provided by the user.
Fixes: 3c876d2428
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
