The check-augeas-lockd test depends on the file
locking/qemu-lockd.conf, so must be skipped when QEMU
is disabled.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Bugs have been found in the VirtualBox API C bindings. These bugs have
been fixed in versions 4.2.20 and 4.3.4. However, the changes in the
C bindings are incompatible with the vbox_CAPI_v4_2.h and vbox_CAPI_v4_3.h
files which are bundled in libvirt source code.
This is why the following patch adds vbox_CAPI_v4_2_20.h and
vbox_CAPI_v4_3_4.h.
The actual underlying problem here is that until now,
libvirt assumed that VirtualBox API can only change between minor
versions (4.2 -> 4.3), but we have a case here where it changed
(or got fixed) between patch versions (4.2.18 -> 4.2.20).
This patch makes the VBOX_API_VERSION represent the full API
version number (i.e 4002 => 4002000) so there are specific version
numbers for Vbox 4.2.20 (4002020) and 4.3.4 (4003004)
I noticed this problem when adding systemd support to netcf, because I
setup the configure.ac to automatically prefer using systemd over
initscripts when possible - although I had copied the
install-data-local target from the example of libvirt's
"libvirt-guests" service more or less verbatim, "make distcheck" would
fail because it was trying to install the service file directly into
/lib/systemd/system rather than into
/home/user/some/unimportant/name/lib/systemd/system.
This is caused by the install/uninstall rules for the systemd unit
files relying on $(DESTDIR) pointing the installed files to the right
place, but in reality $(DESTDIR) is empty during this part of make
distcheck - it instead sets $(prefix) with the toplevel directory used
for its test build/install/uninstall cycle.
(This problem hasn't been seen when running "make distcheck" in
libvirt because libvirt will never build/install systemd support
unless explicitly told to do so on the configure commandline, and
"make distcheck" doesn't put the "--with-initscript=..." option on the
configure commandline.)
I verified that the same problem does exist in libvirt by modifying
libvirt's configure.ac to set:
init_systemd=yes
with_init_script=systemd+redhat
This forces a build/install of the systemd unit files during
distcheck, which yields an error like this:
/usr/bin/install -c -m 644 virtlockd.service \
/lib/systemd/system/
libtool: install: warning: relinking `libvirt-qemu.la'
/usr/bin/install: cannot remove '/lib/systemd/system/virtlockd.service': Permission denied
make[4]: *** [install-systemd] Error 1
After adding $(prefix) to all the definitions of SYSTEMD_UNIT_DIR,
make distcheck now completes successfully with the modified
configure.ac, and the above lines change to something like this:
/usr/bin/install -c -m 644 virtlockd.service \
/home/laine/devel/libvirt/libvirt-1.2.1/_inst/lib/systemd/system/
Define the public API for (de-)registering network events
and the callbacks for receiving lifecycle events. The lifecycle
event includes a 'detail' parameter to match the domain lifecycle
event data, but this is currently unused.
The network events related code goes into its own set of internal
files src/conf/network_event.[ch]
We support gluster volumes in domain XML, so we also ought to
support them as a storage pool. Besides, a future patch will
want to take advantage of libgfapi to handle the case of a
gluster device holding qcow2 rather than raw storage, and for
that to work, we need a storage backend that can read gluster
storage volume contents. This sets up the framework.
Note that the new pool is named 'gluster' to match a
<disk type='network'><source protocol='gluster'> image source
already supported in a <domain>; it does NOT match the
<pool type='netfs'><source><target type='glusterfs'>,
since that uses a FUSE mount to a local file name rather than
a network name.
This and subsequent patches have been tested against glusterfs
3.4.1 (available on Fedora 19); there are likely bugs in older
versions that may prevent decent use of gfapi, so this patch
enforces the minimum version tested. A future patch may lower
the minimum. On the other hand, I hit at least two bugs in
3.4.1 that will be fixed in 3.5/3.4.2, where it might be worth
raising the minimum: glfs_readdir is nicer to use than
glfs_readdir_r [1], and glfs_fini should only return failure on
an actual failure [2].
[1] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00085.html
[2] http://lists.gnu.org/archive/html/gluster-devel/2013-10/msg00086.html
* configure.ac (WITH_STORAGE_GLUSTER): New conditional.
* m4/virt-gluster.m4: new file.
* libvirt.spec.in (BuildRequires): Support gluster in spec file.
* src/conf/storage_conf.h (VIR_STORAGE_POOL_GLUSTER): New pool
type.
* src/conf/storage_conf.c (poolTypeInfo): Treat similar to
sheepdog and rbd.
(virStoragePoolDefFormat): Don't output target for gluster.
* src/storage/storage_backend_gluster.h: New file.
* src/storage/storage_backend_gluster.c: Likewise.
* po/POTFILES.in: Add new file.
* src/storage/storage_backend.c (backends): Register new type.
* src/Makefile.am (STORAGE_DRIVER_GLUSTER_SOURCES): Build new files.
* src/storage/storage_backend.h (_virStorageBackend): Documet
assumption.
Signed-off-by: Eric Blake <eblake@redhat.com>
Makefile.am, vbox_V4_3.c and vbox_driver.c do regular
modifitions to support a new version of APIs.
vbox_tmpl.c basically fixes incompatibilities since 4.2.
The affected incompatibilities of 4.3 are:
* IMachine::Delete() has been renamed to IMachine::deleteConfig()
* IMedium::CreateBaseStorage() now accepts multiple variant values
* IDisplay::GetScreenResolution() now returns the display position
in the guest
* IMachine now has multiple IUSBControllers and IUSBDeviceFilters
handles USB device filters instead of (obsolete) IUSBController
This patch is tested on Mac OS X 10.8.5 and Fedora 19.
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Needed for architectures that don't use gcc atomic ops but pthread. This
fixes the armel build that otherwise breaks like:
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virClassNew':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:150: undefined reference to `virAtomicLock'
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectNew':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:202: undefined reference to `virAtomicLock'
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectUnref':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:274: undefined reference to `virAtomicLock'
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-virobject.o): In function `virObjectRef':
/«PKGBUILDDIR»/debian/build/src/../../../src/util/virobject.c:295: undefined reference to `virAtomicLock'
collect2: error: ld returned 1 exit status
See https://buildd.debian.org/status/fetch.php?pkg=libvirt&arch=armel&ver=1.1.4-1&stamp=1383588268
After commit 3e2f27e1, I've noticed build failures of virt-login-shell
when libapparmor-devel is installed on the build host
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o):
In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined
reference to `aa_change_profile'
collect2: error: ld returned 1 exit status
I was about to commit an easy fix under the build-breaker rule
(build-fix-1.patch), but thought to extend the notion of SECDRIVER_LIBS
to SECDRIVER_CFLAGS, and use both throughout src/Makefile.am where it
makes sense (build-fix-2.patch).
Should I just stick with the simple fix, or is something along the lines
of patch 2 preferred?
Regards,
Jim
>From a0f35945f3127ab70d051101037e821b1759b4bb Mon Sep 17 00:00:00 2001
From: Jim Fehlig <jfehlig@suse.com>
Date: Mon, 21 Oct 2013 15:30:02 -0600
Subject: [PATCH] build: fix virt-login-shell build with apparmor
With libapparmor-devel installed, virt-login-shell fails to link
CCLD virt-login-shell
../src/.libs/libvirt-setuid-rpc-client.a(libvirt_setuid_rpc_client_la-vircommand.o): In function `virExec':
/home/jfehlig/virt/upstream/libvirt/src/util/vircommand.c:653: undefined reference to `aa_change_profile'
collect2: error: ld returned 1 exit status
Fix by linking libvirt_setuid_rpc_client with previously determined
SECDRIVER_LIBS in src/Makefile.am. While at it, introduce SECDRIVER_CFLAGS
and use both throughout src/Makefile.am where it makes sense.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The libvirt.so library has far too many library deps to allow
linking against it from setuid programs. Those libraries can
do stuff in __attribute__((constructor) functions which is
not setuid safe.
The virt-login-shell needs to link directly against individual
files that it uses, with all library deps turned off except
for libxml2 and libselinux.
Create a libvirt-setuid-rpc-client.la library which is linked
to by virt-login-shell. A config-post.h file allows this library
to disable all external deps except libselinux and libxml2.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller uses dbus to talk to systemd to create
cgroups. This means that each LXC controller instance has
a dbus connection. The DBus daemon is limited to 256
connections by default and we want to be able to run many
1000 of containers.
While the dbus limit could be raised in the config files,
it is simpler to make libvirt LXC controller close its
dbus connection once everything is configured.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I tried to test ./configure --without-lxc --without-remote.
First, the build failed with some odd errors, such as an
inability to build xen, or link failures for virNetTLSInit.
But when you think about it, once there is no remote code,
all of libvirtd is useless, any stateful driver that depends
on libvirtd is also not worth compiling, and any libraries
used only by RPC code are not needed. So I patched
configure.ac to make for some saner defaults when an
explicit disable is attempted. Similarly, since we have
migrated virnetdevbridge into generic code, the workaround
for Linux kernel stupidity must not depend on stateful
drivers being in use.
Then there's 'make check' that needs segregation.
Wow - quite a bit of cleanup to make --without-remote useful :)
* configure.ac: Let --without-remote toggle defaults on stateful
drivers and other libraries. Pick up Linux kernel workarounds
even when qemu and lxc are not being compiled.
* tests/Makefile.am (test_programs): Factor out programs that
require remote.
* src/libvirt_private.syms (rpc/virnet*.h): Move...
* src/libvirt_remote.syms: ...into new file.
* src/Makefile.am (SYM_FILES): Ship new syms file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another case missed by commits 716c7bb and 6973e02.
* src/Makefile.am (VIR_NET_RPC_GENERATED): Drop $(srcdir).
(libvirt_net_rpc_la_SOURCES): List generated files more compactly.
Signed-off-by: Eric Blake <eblake@redhat.com>
When running 'make dist' on a system without policykit, we currently
fail. This is because $(srcdir)/access/org.libvirt.api.policy is in
EXTRA_DIST, however, the rule to generate the file is conditional
whether we build with polkit or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This splits up the version parsing code into a callable API like QEMU
help/version string parsing so that we can test it as we need to add
additional patterns for newer versions/products.
Commit 073e1575 tried to set things up so that 1) generated files
to be shipped in the tarball always live in srcdir, and 2) we have
no files in SOURCES that depend on any other files with a literal
$(srcdir) in the name, because that situation can cause confusing
results for the make expansion of $@ depending on whether the file
is found locally or via VPATH. But all my testing for that patch
was done incrementally, where all the protocol.[ch] files had
already been generated prior to the patch and were up-to-date in
the srcdir, and thus I missed one case where $@ causes grief in a
VPATH build from a fresh checkout:
We have a pattern rule for generating remote_protocol.[ch], and
what's more, the rule for protocol.c depends on protocol.h AND
on the protocol.x file. The pattern for protocol.c is only
satisfied via the VPATH lookup for protocol.x, and if protocol.h
doesn't yet exist, the VPATH rule kicks in and we end up with a
dependency on a file with $(srcdir) in the name. Based on make's
rules for $@, this resulted in make building remote_protocol.h
into srcdir (where we want it), then remote_protocol.c into
builddir (oops, not so good for the tarball), and also causes
the build to fail (the compiler can't find the .h if it lives
in a different directory than the .c):
CC remote/libvirt_driver_remote_la-remote_protocol.lo
remote/remote_protocol.c:7:29: fatal error: remote_protocol.h: No such file or directory
#include "remote_protocol.h"
^
compilation terminated.
As before, the fix is to hard-code the output file to go into
srcdir in spite of $@; but since this is in a pattern rule, we
are forced to use $@ in the recipe, so the patch is a bit
trickier than what was done in commit 073e1575.
* src/Makefile.am (%protocol.c, %protocol.h): Force output to srcdir.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since virnetsocket conditionally uses selinux we need to link against it
otherwise the build fails with:
CCLD libvirtd
/usr/bin/ld: ../src/.libs/libvirt-lxc.so: undefined reference to symbol 'freecon'
/lib/i386-linux-gnu/libselinux.so.1: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make[3]: *** [libvirtd] Error 1
The VIR_ACCESS_PERM_CONNECT_DETECT_STORAGE_POOLS enum
constant had its string format be 'detect_storage_pool',
note the missing trailing 's'. This prevent the ACL
check from ever succeeding. Fix this and add a simple
test script to validate this problem of matching names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Automake 2.0 will enable subdir-objects by default; in preparation
for that change, automake 1.14 outputs LOADS of warnings:
daemon/Makefile.am:38: warning: source file '../src/remote/remote_protocol.c' is in a subdirectory,
daemon/Makefile.am:38: but option 'subdir-objects' is disabled
automake-1.14: warning: possible forward-incompatibility.
automake-1.14: At least a source file is in a subdirectory, but the 'subdir-objects'
automake-1.14: automake option hasn't been enabled. For now, the corresponding output
automake-1.14: object file(s) will be placed in the top-level directory. However,
automake-1.14: this behaviour will change in future Automake versions: they will
automake-1.14: unconditionally cause object files to be placed in the same subdirectory
automake-1.14: of the corresponding sources.
automake-1.14: You are advised to start using 'subdir-objects' option throughout your
automake-1.14: project, to avoid future incompatibilities.
daemon/Makefile.am:38: warning: source file '../src/remote/lxc_protocol.c' is in a subdirectory,
daemon/Makefile.am:38: but option 'subdir-objects' is disabled
...
As automake 1.9 also supported this option, and the previous patches
fixed up the code base to work with it, it is safe to now turn it on
unconditionally.
* configure.ac (AM_INIT_AUTOMAKE): Enable subdir-objects.
* .gitignore: Ignore .dirstamp directories.
* src/Makefile.am (PDWTAGS, *-protocol-struct): Adjust to
new subdir-object location of .lo files.
Signed-off-by: Eric Blake <eblake@redhat.com>
We have been adding new .x files without keeping the list of
*-structs files up-to-date. This adds the support for the
recent additions.
In the process of testing this, I also noticed that Fedora 19's
use of dwarves-1.10 (providing pdwtags version 1.9) was producing
a single line on stderr but still giving enough useful info on
stdout that we could check structs; the real goal of checking
stderr separately from stdout was to avoid the bug in dwarves-1.9
where stdout was empty (see bug http://bugzilla.redhat.com/772358).
* src/Makefile.am (struct_prefix, PROTOCOL_STRUCTS): Add missing
struct tests.
(PDWTAGS): Work with Fedora 19 pdwtags.
(lxc_monitor_protocol-struct, lock_protocol-struct): New rules.
* src/lxc_monitor_protocol-structs: New file.
* src/lock_protocol-structs): Likewise.
* cfg.mk (generated_files): Enlarge list.
Signed-off-by: Eric Blake <eblake@redhat.com>
Trying to enable automake's subdir-objects option resulted in
the creation of literal directories such as src/$(srcdir)/remote/.
I traced this to the fact that we had used a literal $(srcdir)
in a location that later fed an automake *_SOURCES variable.
This has also been reported as an automake bug:
http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13928
but it's better to fix our code than to wait for an automake fix.
Some things to remember that affect VPATH builds, and where an
in-tree build is blissfully unaware of the issues: if a VPATH
build fails to find a file that was used as a prereq of any
other target, then the rule for that file will expand $@ to
prefer the current build dir (bad because a VPATH build on a
fresh checkout will then stick $@ in the current directory
instead of the desired srcdir); conversely, if a VPATH build
finds the file in srcdir but decides it needs to be rebuilt,
then the rule for that file will expand $@ to include the
directory where it was found out-of-date (bad for an explicit
listing of $(srcdir)/$@ because an incremental VPATH build will
then expand srcdir twice). As we want these files to go into
srcdir unconditionally, we have to massage or avoid $@ for any
recipe that involves one of these files.
Therefore, this patch removes all uses of $(srcdir) from any
generated file name that later feeds a *_SOURCES variable, and
then rewrites all the recipes to generate those files to
hard-code their creation into srcdir without the use of $@.
* src/Makefile.am (REMOTE_DRIVER_GENERATED): Drop $(srcdir); VPATH
builds know how to find the files, and automake subdir-objects
fails with it in place.
(LXC_MONITOR_PROTOCOL_GENERATED, (LXC_MONITOR_GENERATED)
(ACCESS_DRIVER_GENERATED, LOCK_PROTOCOL_GENERATED): Likewise.
(*_client_bodies.h): Hard-code rules to write into srcdir, as
VPATH tries to build $@ locally if missing.
(util/virkeymaps.h): Likewise.
(lxc/lxc_monitor_dispatch.h): Likewise.
(access/viraccessapi*): Likewise.
(locking/lock_daemon_dispatch_stubs.h): Likewise.
* daemon/Makeflie.am (DAEMON_GENERATED, remote_dispatch.h):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
fixup DAEMON_GENERATED
daemon/Makefile.am installs a .policy file if WITH_LIBVIRTD and
WITH_POLKIT are both set. src/Makefile.am, on the other hand,
installs a .policy file if WITH_POLKIT1 is set, but without checking
WITH_LIBVIRTD. When running 'make rpm' with client_only manually
set, on a Fedora 19 box, that leads to a failure:
RPM build errors:
Installed (but unpackaged) file(s) found:
/usr/share/polkit-1/actions/org.libvirt.api.policy
Fix it by adding another conditional.
* src/Makefile.am (polkitaction_DATA): Make conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
Automake has builtin support to prevent botched conditional nesting,
but only if you use:
if FOO
else !FOO
endif !FOO
An example error message when using the wrong name:
daemon/Makefile.am:378: error: else reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
daemon/Makefile.am:381: error: endif reminder (LIBVIRT_INIT_SCRIPT_SYSTEMD_TRUE) incompatible with current conditional: LIBVIRT_INIT_SCRIPT_SYSTEMD_FALSE
As our makefiles tend to have quite a bit of nested conditionals,
it's better to take advantage of the benefits of the build system
double-checking that our conditionals are well-nested, but that
requires a syntax check to enforce our usage style.
Alas, unlike C preprocessor and spec files, we can't use indentation
to make it easier to see how deeply nesting goes.
* cfg.mk (sc_makefile_conditionals): New rule.
* daemon/Makefile.am: Enforce the style.
* gnulib/tests/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
* tools/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Create libxl_domain.[ch] and move all functions operating on
libxlDomainObjPrivate to these files. This will be useful for
future patches that e.g. add job support for libxlDomainObjPrivate.
Since virtlockd is only built when libvirtd is built, we should
not install its auxiliary files unconditionally. This solves
two failures. 1. 'make distcheck' complains:
rm -f Makefile
ERROR: files left in build directory after distclean:
./src/virtlockd.8
2. './autobuild.sh' complains:
Checking for unpackaged file(s): /usr/lib/rpm/check-files
/home/eblake/rpmbuild/BUILDROOT/mingw-libvirt-1.1.1-1.fc19.eblake1377879911.x86_64
error: Installed (but unpackaged) file(s) found:
/usr/i686-w64-mingw32/sys-root/mingw/etc/libvirt/virtlockd.conf
/usr/i686-w64-mingw32/sys-root/mingw/share/augeas/lenses/tests/test_virtlockd.aug
/usr/i686-w64-mingw32/sys-root/mingw/share/augeas/lenses/virtlockd.aug
/usr/i686-w64-mingw32/sys-root/mingw/share/man/man8/virtlockd.8
/usr/x86_64-w64-mingw32/sys-root/mingw/etc/libvirt/virtlockd.conf
/usr/x86_64-w64-mingw32/sys-root/mingw/share/augeas/lenses/tests/test_virtlockd.aug
/usr/x86_64-w64-mingw32/sys-root/mingw/share/augeas/lenses/virtlockd.aug
/usr/x86_64-w64-mingw32/sys-root/mingw/share/man/man8/virtlockd.8
* src/Makefile.am (CLEANFILES): Add virtlockd.8.
(man8_MANS, conf_DATA, augeas_DATA, augeastest_DATA): Only install
virtlockd files when daemon is built.
Signed-off-by: Eric Blake <eblake@redhat.com>
otherwise having a strict --no-copy-dt-needed-entries fails in several
places like:
CCLD virdbustest
/usr/bin/ld: virdbustest-virdbustest.o: undefined reference to symbol 'dbus_message_unref'
/lib/x86_64-linux-gnu/libdbus-1.so.3: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
This adds two new pages to the website, acl.html describing
the general access control framework and permissions models,
and aclpolkit.html describing the use of polkit as an
access control driver.
page.xsl is modified to support a new syntax
<div id="include" filename="somefile.htmlinc"/>
which will cause the XSL transform to replace that <div>
with the contents of 'somefile.htmlinc'. We use this in
the acl.html.in file, to pull the table of permissions
for each libvirt object. This table is autogenerated
from the enums in src/access/viraccessperms.h by the
genaclperms.pl script.
newapi.xsl is modified so that the list of permissions
checks shown against each API will link to the description
of the permissions in acl.html
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd daemon supports an /etc/libvirt/virtlockd.conf
config file, but we never installed a default config, nor
created any augeas scripts. This change addresses that omission.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
So that app developers / admins know what access control checks
are performed for each API, this patch extends the API docs
generator to include details of the ACLs for each.
The gendispatch.pl script is extended so that it generates
a simple XML describing ACL rules, eg.
<aclinfo>
...
<api name='virConnectNumOfDomains'>
<check object='connect' perm='search_domains'/>
<filter object='domain' perm='getattr'/>
</api>
<api name='virDomainAttachDeviceFlags'>
<check object='domain' perm='write'/>
<check object='domain' perm='save' flags='!VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE'/>
<check object='domain' perm='save' flags='VIR_DOMAIN_AFFECT_CONFIG'/>
</api>
...
</aclinfo>
The newapi.xsl template loads the XML files containing the ACL
rules and generates a short block of HTML for each API describing
the parameter checks and return value filters (if any).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* Move platform specific things (e.g. firewalling and route
collision checks) into bridge_driver_platform
* Create two platform specific implementations:
- bridge_driver_linux: Linux implementation using iptables,
it's actually the code moved from bridge_driver.c
- bridge_driver_nop: dumb implementation that does nothing
Signed-off-by: Eric Blake <eblake@redhat.com>
A VPATH build 'make check' was failing with:
GEN check-driverimpls
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.h: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
Can't open ../../src/../../src/lxc/lxc_monitor_protocol.c: No such file or directory at ../../src/check-driverimpls.pl line 29, <> line 27153.
...
GEN check-aclrules
cannot read ../../src/../../src/remote/remote_protocol.x at ../../src/check-aclrules.pl line 128.
because $(srcdir) was being prepended to file names that already
included it.
* src/Makefile.am (check-driverimpls): Don't add srcdir twice.
Signed-off-by: Eric Blake <eblake@redhat.com>
To register virtual machines and containers with systemd-machined,
and thus have cgroups auto-created, we need to talk over DBus.
This is somewhat tedious code, so introduce a dedicated function
to isolate the DBus call in one place.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Makefiles are another easy file to enforce line limits.
Mostly straightforward; interesting tricks worth noting:
src/Makefile.am: $(confdir) was already defined, use it in more places
tests/Makefile.am: path_add and VG required some interesting compression
* cfg.mk (sc_prohibit_long_lines): Add another test.
* Makefile.am: Fix offenders.
* daemon/Makefile.am: Likewise.
* docs/Makefile.am: Likewise.
* python/Makefile.am: Likewise.
* src/Makefile.am: Likewise.
* tests/Makefile.am: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'check-aclrules' test case validates that there are ACL
checks in each method. This extends it so that it can also
validate that methods which return info about lists of objects,
will filter their returned info throw an ACL check.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On a mingw VPATH build (such as done by ./autobuild.sh), the tarball
created by 'make dist' was including generated files. The VPATH
rules were then seeing that the tarball files were up-to-date, and
not regenerating files locally, leading to this failure:
GEN libvirt.syms
cat: libvirt_access.syms: No such file or directory
cat: libvirt_access_qemu.syms: No such file or directory
cat: libvirt_access_lxc.syms: No such file or directory
make: *** [libvirt.syms] Error 1
We already have a category for generated sym files, which are
intentionally not part of the tarball; stick the access sym
files in that category. The rearrange the declarations a bit
to make it harder to repeat the problem, dropping things that
are now redundant (for example, BUILT_FILES already includes
GENERATED_SYM_FILES, so it does not also need to call out
ACCESS_DRIVER_SYM_FILES).
* src/Makefile.am (USED_SYM_FILES): Don't include generated files.
(GENERATED_SYM_FILES): Access syms files are generated.
(libvirt.syms): Include access syms files here.
(ACCESS_DRIVER_SYMFILES): Rename...
(ACCESS_DRIVER_SYM_FILES): ...for consistency.
Signed-off-by: Eric Blake <eblake@redhat.com>
On mingw, configure sets the name of the lxc symfile to
libvirt_lxc.defs rather than libvirt_lxc.syms. But tarballs
must be arch-independent, regardless of the configure options
used for the tree where we ran 'make dist'. This led to the
following failure in autobuild.sh:
CCLD libvirt-lxc.la
CCLD libvirt-qemu.la
/usr/lib64/gcc/i686-w64-mingw32/4.7.2/../../../../i686-w64-mingw32/bin/ld: cannot find libvirt_lxc.def: No such file or directory
collect2: error: ld returned 1 exit status
make[3]: *** [libvirt-lxc.la] Error 1
make[3]: *** Waiting for unfinished jobs....
We were already doing the right thing with libvirt_qemu.syms.
* src/Makefile.am (EXTRA_DIST): Don't ship a built file which
depends on configure for its final name.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add a script which parses the driver API code and validates
that every API registered in a virNNNDriverPtr table contains
an ACL check matching the API name.
NB this currently whitelists a few xen driver functions
which are temporarily lacking in access control checks.
The xen driver is considered insecure until these are
fixed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the 'gendispatch.pl' script to be able to generate
three new types of file.
- 'aclheader' - defines signatures of helper APIs for
doing authorization checks. There is one helper API
for each API requiring an auth check. Any @acl
annotations result in a method being generated with
a suffix of 'EnsureACL'. If the ACL check requires
examination of flags, an extra 'flags' param will be
present. Some examples
extern int virConnectBaselineCPUEnsureACL(void);
extern int virConnectDomainEventDeregisterEnsureACL(virDomainDefPtr domain);
extern int virDomainAttachDeviceFlagsEnsureACL(virDomainDefPtr domain, unsigned int flags);
Any @aclfilter annotations resuilt in a method being
generated with a suffix of 'CheckACL'.
extern int virConnectListAllDomainsCheckACL(virDomainDefPtr domain);
These are used for filtering individual objects from APIs
which return a list of objects
- 'aclbody' - defines the actual implementation of the
methods described above. This calls into the access
manager APIs. A complex example:
/* Returns: -1 on error (denied==error), 0 on allowed */
int virDomainAttachDeviceFlagsEnsureACL(virConnectPtr conn,
virDomainDefPtr domain,
unsigned int flags)
{
virAccessManagerPtr mgr;
int rv;
if (!(mgr = virAccessManagerGetDefault()))
return -1;
if ((rv = virAccessManagerCheckDomain(mgr,
conn->driver->name,
domain,
VIR_ACCESS_PERM_DOMAIN_WRITE)) <= 0) {
virObjectUnref(mgr);
if (rv == 0)
virReportError(VIR_ERR_ACCESS_DENIED, NULL);
return -1;
}
if (((flags & (VIR_DOMAIN_AFFECT_CONFIG|VIR_DOMAIN_AFFECT_LIVE)) == 0) &&
(rv = virAccessManagerCheckDomain(mgr,
conn->driver->name,
domain,
VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) {
virObjectUnref(mgr);
if (rv == 0)
virReportError(VIR_ERR_ACCESS_DENIED, NULL);
return -1;
}
if (((flags & (VIR_DOMAIN_AFFECT_CONFIG)) == (VIR_DOMAIN_AFFECT_CONFIG)) &&
(rv = virAccessManagerCheckDomain(mgr,
conn->driver->name,
domain,
VIR_ACCESS_PERM_DOMAIN_SAVE)) <= 0) {
virObjectUnref(mgr);
if (rv == 0)
virReportError(VIR_ERR_ACCESS_DENIED, NULL);
return -1;
}
virObjectUnref(mgr);
return 0;
}
- 'aclsyms' - generates a linker script to export the
APIs to drivers. Some examples
virConnectBaselineCPUEnsureACL;
virConnectCompareCPUEnsureACL;
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add an access control driver that uses the pkcheck command
to check authorization requests. This is fairly inefficient,
particularly for cases where an API returns a list of objects
and needs to check permission for each object.
It would be desirable to use the polkit API but this links
to glib with abort-on-OOM behaviour, so can't be used. The
other alternative is to speak to dbus directly
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch introduces the virAccessManagerPtr class as the
interface between virtualization drivers and the access
control drivers. The viraccessperm.h file defines the
various permissions that will be used for each type of object
libvirt manages
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A few things have changed in the VirtualBox API - some small
(capitalizations of things in function names like Ip to IP
and Dhcp to DHCP) and some much larger (FindMedium is superceded
by OpenMedium). The biggest change for the sake of this patch
is the signature of CreateMachine is quite a bit different. Using
the Oracle source as a guide, to spin up a VM with a given UUID,
it looks like a text flag has to be passed in a new argument to
CreateMachine. This flag is built in the VirtualBox 4.2 specific
ifdefs and is kind of ugly but works. Additionally, there is now
(unused) VM groups support in CreateMachine and the previous
'osTypeId' arg is currently set to nsnull as in the Oracle code.
The FindMedium to OpenMedium changes were more straightforward
and are pretty clear. The rest of the vbox template changes are
basically spelling/capitalization changes from the looks of things.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit d671121d was incomplete; I hit another compile fail on
cygwin not finding the correct rpc/rpc.h.
* src/Makefile.am (virtlockd_CFLAGS): Add XDR_CFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
On cygwin, the build failed with:
In file included from ./rpc/virnetmessage.h:24:0,
from ./rpc/virnetclient.h:29,
from locking/lock_driver_lockd.c:31:
./rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file or directory
* src/Makefile.am (lockd_la_CFLAGS): Add XDR_CFLAGS.
Signed-off-by: Eric Blake <eblake@redhat.com>
Change the build process & driver initialization so that the
VirtualBox driver is built into libvirtd, instead of libvirt.so
This change avoids the VirtualBox GPLv2-only license causing
compatibility problems with libvirt.so which is under the
GPLv2-or-later license.
NB this change prevents use of the VirtualBox driver on the
Windows platform, until such time as libvirtd can be made
to work there.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
DRIVER_SOURCE_FILES mixes files with absolute path (inherited from
REMOTE_DRIVER_GENERATED) with file paths that are relative to srcdir but
check-driverimpls.pl needs full paths.
Automake already passes all CFLAGS to the linker too, so it
is not necessary to set WARN_LDFLAGS in addition to the
WARN_CFLAGS variable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clang does not like the -export-dynamic flag. The compiler does
not need it in the first place, so we can avoid the problem by
only setting it for the linker
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update the DRIVER_SOURCE_FILES variable to reference the
other various XXX_SOURCES variables, instead of duplicating
the filename lists. This results in a bunch of extra files
being processed, but the test scripts can easily skip those
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On a mingw build, 'make distcheck' fails with:
GEN libvirt_qemu.def
make[3]: *** No rule to make target `../../src/libvirt_lxc.syms', needed by `libvirt_lxc.def'. Stop.
I traced it to a missing entry in EXTRA_DIST. But rather than keep
the entire list in sync, it is easier to list the three syms files
that drive .so files directly, and then reuse existing makefile
variables for the remaining files (that is, I validated that all
remaining files are added to SYM_FILES, possibly via USED_SYM_FILES,
according to makefile conditionals).
Problem introduced in commit 3d1596b (v1.0.2).
* src/Makefile.am (EXTRA_DIST): Ensure all syms files are shipped.
Signed-off-by: Eric Blake <eblake@redhat.com>
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:
$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name
for qemu system mode, and
$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name
for qemu session mode.
Ensure that all drivers implementing public APIs use a
naming convention for their implementation that matches
the public API name.
eg for the public API virDomainCreate make sure QEMU
uses qemuDomainCreate and not qemuDomainStart
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the virDrvXXX method names exactly match
the public APIs virYYY method names. ie XXX == YYY.
Add a test case to prevent any regressions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are many declared options in gendispatch.pl that were
no longer used. Those which were used were obscure '-b', '-k'
and '-d'. Switch to use --mode={debug|client|server}.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The definition of structs for cgroups are kept in vircgroup.c since
they are intended to be private from users of the API. To enable
effective testing, however, they need to be accessible. To address
the latter issue, without compronmising the former, this introduces
a new vircgrouppriv.h file to hold the struct definitions.
To prevent other files including this private header, it requires
that __VIR_CGROUP_ALLOW_INCLUDE_PRIV_H__ be defined before inclusion
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
By default, libtool builds two .o files for every .lo rule:
src/foo.o - static builds
src/.libs/foo.o - shared library builds
But since commit ad42b34b disabled static builds, src/foo.o is
no longer built by default. On a fresh checkout, this means our
protocol check rules using pdwtags were testing a missing file,
and thanks to a lousy behavior of pdwtags happily giving no output
and 0 exit status (http://bugzilla.redhat.com/949034), we were
merely claiming that "dwarves is too old" and skipping the test.
However, if you swap between branches and do incremental builds,
such as building v0.10.2-maint and then switching back to master,
you end up with src/foo.o being leftover from its 0.10.2 state,
and then 'make check' fails because the .o file does not match
the protocol-structs file due to API additions in the meantime.
A simpler fix would be to always look in .libs for the .o to
be parsed; but since it is possible to pass ./configure options
to tell libtool to do a static-only build with no shared .o,
I went with the approach of finding the newest of the two files,
whenever both exist.
* src/Makefile.am (PDWTAGS): Ensure we test just-built file.
By passing the flags -z relro -z now to the linker, we can force
it to resolve all library symbols at startup, instead of on-demand.
This allows it to then make the global offset table (GOT) read-only,
which makes some security attacks harder.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
PIE (position independent executable) adds security to executables
by composing them entirely of position-independent code (PIC. The
.so libraries already build with -fPIC. This adds -fPIE which is
the equivalent to -fPIC, but for executables. This for allows Exec
Shield to use address space layout randomization to prevent attackers
from knowing where existing executable code is during a security
attack using exploits that rely on knowing the offset of the
executable code in the binary, such as return-to-libc attacks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The recent commit moved some of the use of libnuma out of the
driver code, and into src/util/. It did not, however, update
libvirt_util.la to link against libnuma. This caused linkage
failure with virt-aa-helper, since nothing else caused libnuma
to be pulled onto the linker command line.
The fix removes all reference to NUMACTL_LIBS/CFLAGS from the
various modules in src/Makefile.am and just adds them to the
libvirt_util.la module, which everything else depends on.
Technically a build-breaker fix, but wanted to wait for feedback
on this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
qemuGetNumadAdvice will be used by LXC driver, rename
it to virNumaGetAutoPlacementAdvice and move it to virnuma.c
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
When building with --without-libvirtd and udev support is detected we
will fail to build with the following error:
node_device/node_device_udev.c:1608:37: error: unknown type name
'virStateInhibitCallback'
Introduce a local object virIdentity for managing security
attributes used to form a client application's identity.
Instances of this object are intended to be used as if they
were immutable, once created & populated with attributes
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The src/lxc/lxc_*_dispatch.h files only had deps on the
RPC generator script & the XDR definition file. So when
the Makefile.am args passed to the generator were change,
the disaptch code was not re-generated. This caused a
build failure
CC libvirt_lxc-lxc_controller.o
lxc/lxc_controller.c: In function 'virLXCControllerSetupServer':
lxc/lxc_controller.c:718:47: error: 'virLXCMonitorProcs' undeclared (first use in this function)
lxc/lxc_controller.c:718:47: note: each undeclared identifier is reported only once for each function it appears in
lxc/lxc_controller.c:719:47: error: 'virLXCMonitorNProcs' undeclared (first use in this function)
make[3]: *** [libvirt_lxc-lxc_controller.o] Error 1
For added fun, the generated files were not listed in
CLEANFILES, so only a 'git clean -f' would fix the build
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The naming used in the RPC protocols for the LXC monitor and
lock daemon confused the script used to generate systemtap
helper functions. Rename the LXC monitor protocol symbols to
reduce confusion. Adapt the gensystemtap.pl script to cope
with the LXC monitor / lock daemon naming conversions.
This has no functional impact on RPC wire protocol, since
names are only used in the C layer
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A number of symbols are only present when GNUTLS is enabled.
Thus we must use a separate libvirt_gnutls.syms file for them
instead of libvirt_private.syms
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCaps structure gathered a ton of irrelevant data over time that.
The original reason is that it was propagated to the XML parser
functions.
This patch aims to create a new data structure virDomainXMLConf that
will contain immutable data that are used by the XML parser. This will
allow two things we need:
1) Get rid of the stuff from virCaps
2) Allow us to add callbacks to check and add driver specific stuff
after domain XML is parsed.
This first attempt removes pointers to private data allocation functions
to this new structure and update all callers and function that require
them.
On FreeBSD, I got a 'make check' failure:
GEN check-symsorting
Symbol block at ./libvirt_atomic.syms:4: viratomic.h not found
* src/Makefile.am (SYM_FILES): New define.
(check-symsorting): Check on all symfiles, even when not used.
* src/libvirt_atomic.syms: Fix offender.
Automating a sorting check is the only way to ensure we don't
regress. Suggested by Dan Berrange.
* src/check-symsorting.pl (check_sorting): Add a parameter,
validate that groups are in order, and that files exist.
* src/Makefile.am (check-symsorting): Adjust caller.
* src/libvirt_private.syms: Fix typo.
* src/libvirt_linux.syms: Fix file name.
* src/libvirt_vmx.syms: Likewise.
* src/libvirt_xenxs.syms: Likewise.
* src/libvirt_sasl.syms: Likewise.
* src/libvirt_libssh2.syms: Likewise.
* src/libvirt_esx.syms: Mention file name.
* src/libvirt_openvz.syms: Likewise.
More mingw build failures:
CCLD libvirt-lxc.la
/usr/lib64/gcc/i686-w64-mingw32/4.7.2/../../../../i686-w64-mingw32/bin/ld: cannot find libvirt_lxc.def: No such file or directory
CC virportallocatortest-virportallocatortest.o
../../tests/virportallocatortest.c: In function 'main':
../../tests/virportallocatortest.c:195:1: error: implicit declaration of function 'setenv' [-Werror=implicit-function-declaration]
* src/Makefile.am (GENERATED_SYM_FILES): Also generate
libvirt_lxc.def.
* bootstrap.conf (gnulib_modules): Import setenv.
virCommand gets two new APIs: virCommandSetSELinuxLabel() and
virCommandSetAppArmorProfile(), which both save a copy of a
null-terminated string in the virCommand. During virCommandRun, if the
string is non-NULL and we've been compiled with AppArmor and/or
SELinux security driver support, the appropriate security library
function is called for the child process, using the string that was
previously set. In the case of SELinux, setexeccon_raw() is called,
and for AppArmor, aa_change_profile() is called.
This functionality has been added so that users of virCommand can use
the upcoming virSecurityManagerSetChildProcessLabel() prior to running
a child process, rather than needing to setup a hook function to be
called (and in turn call virSecurityManagerSetProcessLabel()) *during*
the setup of the child process.
This makes it simpler to include the necessary system security driver
libraries for a particular system. For this patch, several existing
conditional sections from the Makfile were replaced; I'll later be
adding SECDRIVER_LIBS to libvirt_util_la_LIBADD, because vircommand.c
will be calling a function from $securitylib.
We have several cases where we need to read endian-dependent
data regardless of host endianness; rather than open-coding
these call sites, it will be nicer to funnel things through
a macro.
The virendian.h file can be expanded to add writer functions,
and/or 16-bit access patterns, if needed. Also, if we need
to turn things into a function to avoid multiple evaluations
of buf, that can be done later. But for now, a macro worked.
* src/util/virendian.h: New file.
* src/Makefile.am (UTIL_SOURCES): Ship it.
* tests/virendiantest.c: New test.
* tests/Makefile.am (test_programs, virendiantest_SOURCES): Run
the test.
* .gitignore: Ignore built file.
libvirt.c calls curl_global_init() if WITH_CURL is defined and thus it
should be linked with libcurl. This fixes link failure in case neither
xenapi nor esx driver is enabled (they are the only users of libcurl).
Some places missed the conversion from LIBCURL_{CFLAGS,LIBS} to
CURL_{CFLAGS,LIBS}, and a part of curl check was left in
configure.ac instead of m4/virt-curl.m4 by mistake
This patch introduces support for LXC specific public APIs. In
common with what was done for QEMU, this creates a libvirt_lxc.so
library and libvirt/libvirt-lxc.h header file.
The actual APIs are
int virDomainLxcOpenNamespace(virDomainPtr domain,
int **fdlist,
unsigned int flags);
int virDomainLxcEnterNamespace(virDomainPtr domain,
unsigned int nfdlist,
int *fdlist,
unsigned int *noldfdlist,
int **oldfdlist,
unsigned int flags);
which provide a way to use the setns() system call to move the
calling process into the container's namespace. It is not
practical to write in a generically applicable manner. The
nearest that we could get to such an API would be an API which
allows to pass a command + argv to be executed inside a
container. Even if we had such a generic API, this LXC specific
API is still useful, because it allows the caller to maintain
the current process context, in particular any I/O streams they
have open.
NB the virDomainLxcEnterNamespace() API is special in that it
runs client side, so does not involve the internal driver API.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This converts the libssh2 configure check to use LIBVIRT_CHECK_PKG.
Previously it would check version 1.0 and 1.3, but this simplifies
things to just require version 1.3
I ran 'make dist' in the directory left over from ./autobuild.sh
(which was configured for a mingw cross build); the resulting
tarball had more files than 'make dist' on a normal Linux build.
I traced it to the fact that we were distributing a generated
file, but only when configure said the end user had to generate
the file in the first place. In the process, I noticed that
we had some difference in symbol file names; I added a comment
explaining why the difference exists (after first trying to
normalize the names and hitting VPATH build failures).
* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): Add some comments.
* src/Makefile.am (EXTRA_DIST): No need to ship a generated file;
particularly since which file is built depends on configure results.
To avoid confusion between the LXC driver <-> controller
monitor RPC protocol and the libvirt-lxc.so <-> libvirtd public
RPC protocol, rename the former to lxc_monitor_protocol.x
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
See also commit 66ff2dd, where we avoided installing these files
as executables.
* daemon/Makefile.am (libvirtd.service): Drop chmod.
* tools/Makefile.am (libvirt-guests.service): Likewise.
* src/Makefile.am (virtlockd.service, virtlockd.socket):
Likewise.
virtlockd.service could be installed to a configurable root,
but virtlockd.socket was hardcoded to installation into a
distro.
* src/Makefile.am (virtlockd.service, virtlockd.socket): Drop
unused substitutions.
* src/locking/virtlockd.socket.in (ListenStream): Don't hard-code
/var.
We had several different styles of .in conversion in our Makefiles:
ALLCAPS, @ALLCAPS@, @lower@, ::lower::
Canonicalize on one form, to make it easier to copy and paste
between .in files.
Also, we were using some non-portable sed constructs: \@ is an
undefined escape sequence (it happens to be @ itself in GNU sed,
but POSIX allows it to mean something else), as well as risky
behavior (failure to consistently quote things means a space
in $(sysconfdir) could throw things off; also, Autoconf recommends
using | rather than , or ! in the s||| operator, because | has to
be quoted in shell and is therefore less likely to appear in file
names than , or !).
Fix all of these uses to follow the same syntax.
* daemon/libvirtd.8.in: Switch to @var@.
* tools/virt-xml-validate.in: Likewise.
* tools/virt-pki-validate.in: Likewise.
* src/locking/virtlockd.init.in: Likewise.
* daemon/Makefile.am: Prefer | over ! in sed.
(libvirtd.8): Prefer consistent substitution.
(libvirtd.init, libvirtd.service): Avoid non-portable sed.
* tools/Makefile.am (libvirt-guests.sh, libvirt-guests.init)
(libvirt-guests.service): Likewise.
(virt-xml-validate, virt-pki-validate, virt-sanlock-cleanup):
Prefer consistent capitalization.
* src/Makefile.am (virtlockd.init, virtlockd.service)
(virtlockd.socket): Prefer consistent substitution.
The functionality provided in virchrdev.c (previously virconsole.c) is
applicable to other types of character devices besides consoles, such
as channels. This patch is just code motion, renaming things such as
"console" or "pty", instead using more general terms such as
"character device" or "device path".
To bring in line with new naming practice, rename the=
src/util/cgroup.{h,c} files to vircgroup.{h,c}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a 'virArch' enum for CPU architectures. Include
data type providing wordsize and endianness, and APIs to
query this info and convert to/from enum and string form.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This adds support for host device passthrough with the
LXC driver. Since there is only a single kernel image,
it doesn't make sense to pass through PCI devices, but
USB devices are fine. For the latter we merely need to
make the /dev/bus/usb/NNN/MMM character device exist
in the container's /dev
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd daemon scripts were lousy, when compared to their
counterparts in daemon/Makefile.am. In particular, when init
scripts were selected, this resulted in 'make distcheck' failing
due to failure to clean up src/virtlockd.init.
* src/Makefile.am (install-systemd): Fix dependencies. Use MKDIR_P.
(uninstall-systemd): Remove empty directory. Use fewer processes.
(install-init, install-sysconfig): Use MKDIR_P.
(uninstall-init): Remove correct file, and also empty directory.
(uninstall-sysconfig): Remove empty directory.
(DISTCLEANFILES): Clean up trivially built sources.
The default lockd driver behavour is to acquire leases
directly on the disk files. This introduces an alternative
mode, where leases are acquire indirectly on a file that
is based on a SHA256 hash of the disk filename.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This adds a 'lockd' lock driver which is just a client which
talks to the lockd daemon to perform all locking. This will
be the default lock driver for any hypervisor which needs one.
* src/Makefile.am: Add lockd.so plugin
* src/locking/lock_driver_lockd.c: Lockd driver impl
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This enhancement virtlockd so that it can receive a pre-opened
UNIX domain socket from systemd at launch time, and adds the
systemd service/socket unit files
* daemon/libvirtd.service.in: Require virtlockd to be running
* libvirt.spec.in: Add virtlockd systemd files
* src/Makefile.am: Install systemd files
* src/locking/lock_daemon.c: Support socket activation
* src/locking/virtlockd.service.in, src/locking/virtlockd.socket.in:
systemd unit files
* src/rpc/virnetserverservice.c, src/rpc/virnetserverservice.h:
Add virNetServerServiceNewFD() method
* src/rpc/virnetsocket.c, src/rpc/virnetsocket.h: Add virNetSocketNewListenFD
method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a lock_daemon_dispatch.c file which implements the
server side dispatcher the RPC APIs previously defined in the
lock protocol.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd daemon will be responsible for managing locks
on virtual machines. Communication will be via the standard
RPC infrastructure. This provides the XDR protocol definition
* src/locking/lock_protocol.x: Wire protocol for virtlockd
* src/Makefile.am: Include lock_protocol.[ch] in virtlockd
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virtlockd daemon will maintain locks on behalf of libvirtd.
There are two reasons for it to be separate
- Avoid risk of other libvirtd threads accidentally
releasing fcntl() locks by opening + closing a file
that is locked
- Ensure locks can be preserved across libvirtd restarts.
virtlockd will need to be able to re-exec itself while
maintaining locks. This is simpler to achieve if its
sole job is maintaining locks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
make check fails in check-symsorting if configure is not run in
the source directory. Prefixing symfile names with $(srcdir)
fixes this.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Add check-symsorting.pl to perform case-insensitive alphabetical
sorting of groups of symbols. Fix all violations it reports
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Parallels Cloud Server uses virtual networks model for network
configuration. It uses own tools for virtual network management.
So add network driver, which will be responsible for listing
virtual networks and performing different operations on them
(in consequent patched).
This patch only allows listing virtual network names, without
any parameters like DHCP server settings.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement the domainManagedSave, domainHasManagedSaveImage, and
domainManagedSaveRemove functions in the libvirt legacy xen driver.
domainHasManagedSaveImage check the managedsave image from filesystem
everytime. This is different from qemu and libxl driver. In qemu or
libxl driver, there is a hasManagesSave flag in virDomainObjPtr which
is not used in xen legacy driver. This flag could not add into xen
driver ptr either, because the driver ptr will be released at the end of
every libvirt api call. Meanwhile, AFAIK, xen store all the flags in
xen not in libvirt xen driver. There is no need to add this flag in xen.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
Currently to deal with auto-shutdown libvirtd must periodically
poll all stateful drivers. Thus sucks because it requires
acquiring both the driver lock and locks on every single virtual
machine. Instead pass in a "inhibit" callback to virStateInitialize
which drivers can invoke whenever they want to inhibit shutdown
due to existance of active VMs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The patch adds the backend driver to support iSCSI format storage pools
and volumes for ESX host. The mapping of ESX iSCSI specifics to Libvirt
is as follows:
1. ESX static iSCSI target <------> Libvirt Storage Pools
2. ESX iSCSI LUNs <------> Libvirt Storage Volumes.
The above understanding is based on http://libvirt.org/storage.html.
The operation supported on iSCSI pools includes:
1. List storage pools & volumes.
2. Get XML descriptor operaion on pools & volumes.
3. Lookup operation on pools & volumes by name, UUID and path (if applicable).
iSCSI pools does not support operations such as: Create / remove pools
and volumes.
This introduces a few new APIs for dealing with strings.
One to split a char * into a char **, another to join a
char ** into a char *, and finally one to free a char **
There is a simple test suite to validate the edge cases
too. No more need to use the horrible strtok_r() API,
or hand-written code for splitting strings.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To be able todo controlled shutdown/reboot of containers an
API to talk to init via /dev/initctl is required. Fortunately
this is quite straightforward to implement, and is supported
by both sysvinit and systemd. Upstart support for /dev/initctl
is unclear.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
this patch addes fuse support for libvirt lxc.
we can use fuse filesystem to generate sysinfo dynamically,
So we can isolate /proc/meminfo,cpuinfo and so on through
fuse filesystem.
we mount fuse filesystem for every container.
the mount name is libvirt,mount point is
localstatedir/run/libvirt/lxc/containername.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The patch refactors the current ESX storage driver due to following reasons:
1. Given most of the public APIs exposed by the storage driver in Libvirt
remains same, ESX storage driver should not implement logic specific
for only one supported format (current implementation only supports VMFS).
2. Decoupling interface from specific storage implementation gives us an
extensible design to hook implementation for other supported storage
formats.
This patch refactors the current driver to implement it as a facade pattern i.e.
the driver exposes all the public libvirt APIs, but uses backend drivers to get
the required task done. The backend drivers provide implementation specific to
the type of storage device.
File changes:
------------------
esx_storage_driver.c ----> esx_storage_driver.c (base storage driver)
|
|---> esx_storage_backend_vmfs.c (VMFS backend)
Commit 34e8f63a3 altered virfile.o to drag in additional symbols,
which in turn led to pulling in other .o files and eventually causing
a link failure when systemtap probes are enabled, such as:
./.libs/libvirt_util.a(libvirt_util_la-event_poll.o): In function `virEventPollRunOnce':
/home/dummy/libvirt/src/util/event_poll.c:614: undefined reference to `libvirt_event_poll_run_semaphore'
./.libs/libvirt_util.a(libvirt_util_la-event_poll.o):(.note.stapsdt+0x24): undefined reference to `libvirt_event_poll_add_handle_semaphore'
Even though libvirt_iohelper and libvirt_parthelper don't directly
use the portion of virfile.o that drags in probing, it was easier
to satisfy the linker and get the build back up, than to figure out
whether it is even possible or worth trying to disentangle the mess.
* src/Makefile.am (libvirt_iohelper_LDADD)
(libvirt_parthelper_LDADD): Use libvirt_probes.lo when needed.
The previously introduced virFile{Lock,Unlock} APIs provide a
way to acquire/release fcntl() locks on individual files. For
unknown reason though, the POSIX spec says that fcntl() locks
are released when *any* file handle referring to the same path
is closed. In the following sequence
threadA: fd1 = open("foo")
threadB: fd2 = open("foo")
threadA: virFileLock(fd1)
threadB: virFileLock(fd2)
threadB: close(fd2)
you'd expect threadA to come out holding a lock on 'foo', and
indeed it does hold a lock for a very short time. Unfortunately
when threadB does close(fd2) this releases the lock associated
with fd1. For the current libvirt use case for virFileLock -
pidfiles - this doesn't matter since the lock is acquired
at startup while single threaded an never released until
exit.
To provide a more generally useful API though, it is necessary
to introduce a slightly higher level abstraction, which is to
be referred to as a "lockspace". This is to be provided by
a virLockSpacePtr object in src/util/virlockspace.{c,h}. The
core idea is that the lockspace keeps track of what files are
already open+locked. This means that when a 2nd thread comes
along and tries to acquire a lock, it doesn't end up opening
and closing a new FD. The lockspace just checks the current
list of held locks and immediately returns VIR_ERR_RESOURCE_BUSY.
NB, the API as it stands is designed on the basis that the
files being locked are not being otherwise opened and used
by the application code. One approach to using this API is to
acquire locks based on a hash of the filepath.
eg to lock /var/lib/libvirt/images/foo.img the application
might do
virLockSpacePtr lockspace = virLockSpaceNew("/var/lib/libvirt/imagelocks");
lockname = md5sum("/var/lib/libvirt/images/foo.img");
virLockSpaceAcquireLock(lockspace, lockname);
NB, in this example, the caller should ensure that the path
is canonicalized before calculating the checksum.
It is also possible to do locks directly on resources by
using a NULL lockspace directory and then using the file
path as the lock name eg
virLockSpacePtr lockspace = virLockSpaceNew(NULL);
virLockSpaceAcquireLock(lockspace, "/var/lib/libvirt/images/foo.img");
This is only safe to do though if no other part of the process
will be opening the files. This will be the case when this
code is used inside the soon-to-be-reposted virlockd daemon
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While the changes to sanlock driver should be stable, the actual
implementation of sanlock_helper is supposed to be replaced in the
future. However, before we can implement a better sanlock_helper, we
need an administrative interface to libvirtd so that the helper can just
pass a "leases lost" event to the particular libvirt driver and
everything else will be taken care of internally. This approach will
also allow libvirt to pass such event to applications and use
appropriate reasons when changing domain states.
The temporary implementation handles all actions directly by calling
appropriate libvirt APIs (which among other things means that it needs
to know the credentials required to connect to libvirtd).
Add a read-only udev based backend for virInterface. Useful for distros
that do not have netcf support yet. Multiple libvirt based utilities use
a HAL based fallback when virInterface is not available which is less
than ideal. This implements:
* virConnectNumOfInterfaces()
* virConnectListInterfaces()
* virConnectNumOfDefinedInterfaces()
* virConnectListDefinedInterfaces()
* virConnectListAllInterfaces()
* virConnectInterfaceLookupByName()
* virConnectInterfaceLookupByMACString()
This reverts part of commit 5468594f465; the perl changes in that
patch were sufficient. Since libvirt.syms is already a generated
file created in part from libvirt_private.syms, we don't need a
second pass over libvirt_private.syms in isolation.
* src/Makefile.am: Undo addition of check-private-symfile.
Currently, we are checking if libvirt.so contains public symbols.
However, sometimes we rename an internal symbol and forget to
change libvirt_private.syms accordingly. Hence, it's safer to check
for internal symbols as well.
There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Based exclusively on work by Eric Blake in a patch posted with the same
subject. However some modifications related to comments and my plans to
add another backend.
Added WITH_INTERFACE as the only automake variable deciding whether to
build the driver and using WITH_NETCF to identify that we're wanting to
use the netcf library as the backend.
* configure.ac: Added with_interface
* src/interface/netcf_driver.c: Renamed..
* src/interface/interface_backend_netcf.c: ..to this to match storage.
* src/interface/netcf_driver.h: Renamed..
* src/interface/interface_driver.h: ..to this.
* daemon/Makefile.am: Respect WITH_INTERFACE and WITH_NETCF.
* libvirt.spec.in: Add RPM support for --with-interface
I tested both OpenBSD and cygwin; both failed 'make check' with:
GEN check-symfile
Can't return outside a subroutine at ./check-symfile.pl line 13.
Perl requires 'exit 77' instead of 'return 77' in that context,
but even with that tweak, the build still fails, since the exit
code of 77 is only special to explicit TESTS=foo listings, and
not to make-only dependency rules where we are not going through
automake's test framework.
* src/check-symfile.pl: Kill bogus platform check...
* src/Makefile.am (check-symfile): ...and replace with an automake
conditional.
On OpenBSD, clock_gettime() exists in libc rather than librt, and
blindly linking with -lrt made the build fail. Gnulib already
did the work for determining which libraries to use, so we should
reuse that work rather than doing it ourselves.
* bootstrap.conf (gnulib_modules): Pull in clock-time.
* configure.ac (RT_LIBS): Drop.
* src/Makefile.am (libvirt_util_la_LIBADD): Use gnulib variable
instead.
* src/util/virtime.c (includes): Simplify.
When libvirt_lxc is built, it uses the utility library and #includes
virnetdev.h, which #includes virnetlink.h, which includes
<netlink/msg.h>.
Normally, the netlink include directory would be just off
/usr/include, so that wouldn't create a problem, but on Fedora and
RHEL systems using libnl3, the libnl includes have been moved into
/usr/include/libnl3 (to allow concurrent installation of libnl-1.1).
All other binaries that need it have added $(LIBNL_CFLAGS) to their
CFLAGS, but not libvirt_lxc, so it fails to build on Fedora and RHEL
that have only libnl3-devel installed. This was previously unnoticed
because everyone was building with libnl headers in
/usr/include/netlink (even on systems with the headers in
/usr/include/libnl3/netlink, many people (like me) usually also have
the libnl1.1 headers in /usr/include/netlink).
This patch adds the necessary CFLAGS for libvirt_lxc.
Note that we don't need to add $(LIBNL_LIBS) to the LDADD for this
binary, because it never directly calls libnl functions, but only
calls them indirectly through the util library, which it's already
linking against.
This has several benefits:
1. Future snapshot-related code has a definite place to go (and I
_will_ be adding some)
2. Snapshot errors now use the VIR_FROM_DOMAIN_SNAPSHOT error
classification, which has been underutilized (previously only in
libvirt.c)
* src/conf/domain_conf.h, domain_conf.c: Split...
* src/conf/snapshot_conf.h, snapshot_conf.c: ...into new files.
* src/Makefile.am (DOMAIN_CONF_SOURCES): Build new files.
* po/POTFILES.in: Mark new file for translation.
* src/vbox/vbox_tmpl.c: Update caller.
* src/esx/esx_driver.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_domain.h: Likewise.
Older automake 1.9.6 (hello there, RHEL 5) did not populate
$(builddir), which meant 'make check' failed with:
make[3]: *** No rule to make target `/.libs/libvirt.la', needed by `check-symfile'. Stop.
For that matter, even newer automake doesn't directly emit rules
to build .libs/libvirt.la; we are better off basing our rules
on the public ./libvirt.la.
* src/Makefile.am (check-symfile): Delete useless variable.
Without this patch, RHEL 5 fails to compile, since the dbus
files lives under /usr/include/dbus-1.0/dbus/dbus.h, and
DBUS_CFLAGS contains -I/usr/include/dbus-1.0.
In file included from network/bridge_driver.c:67:
../src/util/virdbus.h:26:25: error: dbus/dbus.h: No such file or directory
* src/Makefile.am (libvirt_driver_network_impl_la_CFLAGS): Add
DBUS_CFLAGS.
* configure.ac, spec file: firewalld defaults to enabled if dbus is
available, otherwise is disabled. If --with_firewalld is explicitly
requested and dbus is not available, configure will fail.
* bridge_driver: add dbus filters to get the FirewallD1.Reloaded
signal and DBus.NameOwnerChanged on org.fedoraproject.FirewallD1.
When these are encountered, reload all the iptables reuls of all
libvirt's virtual networks (similar to what happens when libvirtd is
restarted).
* iptables, ebtables: use firewall-cmd's direct passthrough interface
when available, otherwise use iptables and ebtables commands. This
decision is made once the first time libvirt calls
iptables/ebtables, and that decision is maintained for the life of
libvirtd.
* Note that the nwfilter part of this patch was separated out into
another patch by Stefan in V2, so that needs to be revised and
re-reviewed as well.
================
All the configure.ac and specfile changes are unchanged from Thomas'
V3.
V3 re-ran "firewall-cmd --state" every time a new rule was added,
which was extremely inefficient. V4 uses VIR_ONCE_GLOBAL_INIT to set
up a one-time initialization function.
The VIR_ONCE_GLOBAL_INIT(x) macro references a static function called
vir(Ip|Eb)OnceInit(), which will then be called the first time that
the static function vir(Ip|Eb)TablesInitialize() is called (that
function is defined for you by the macro). This is
thread-safe, so there is no chance of any race.
IMPORTANT NOTE: I've left the VIR_DEBUG messages in these two init
functions (one for iptables, on for ebtables) as VIR_WARN so that I
don't have to turn on all the other debug message just to see
these. Even if this patch doesn't need any other modification, those
messages need to be changed to VIR_DEBUG before pushing.
This one-time initialization works well. However, I've encountered
problems with testing:
1) Whenever I have enabled the firewalld service, *all* attempts to
call firewall-cmd from within libvirtd end with firewall-cmd hanging
internally somewhere. This is *not* the case if firewall-cmd returns
non-0 in response to "firewall-cmd --state" (i.e. *that* command runs
and returns to libvirt successfully.)
2) If I start libvirtd while firewalld is stopped, then start
firewalld later, this triggers libvirtd to reload its iptables rules,
however it also spits out a *ton* of complaints about deletion failing
(I suppose because firewalld has nuked all of libvirt's rules). I
guess we need to suppress those messages (which is a more annoying
problem to fix than you might think, but that's another story).
3) I noticed a few times during this long line of errors that
firewalld made a complaint about "Resource Temporarily
unavailable. Having libvirtd access iptables commands directly at the
same time as firewalld is doing so is apparently problematic.
4) In general, I'm concerned about the "set it once and never change
it" method - if firewalld is disabled at libvirtd startup, causing
libvirtd to always use iptables/ebtables directly, this won't cause
*terrible* problems, but if libvirtd decides to use firewall-cmd and
firewalld is later disabled, libvirtd will not be able to recover.
Commit 1d22ba95 was complete at the time, but we have since
reintroduced a warning that is fixed in the same manner:
CCLD storagebackendsheepdogtest
*** Warning: Linking the executable storagebackendsheepdogtest against the loadable module
*** libvirt_driver_storage.so is not portable!
* src/Makefile.am (libvirt_driver_storage.la): Factor into new
convenience library libvirt_driver_storage_impl.la.
* tests/Makefile.am (storagebackendsheepdogtest_LDADD): Link to
convenience library, not shared library.
This patch adds helper functions that enable us to use libssh2 in
conjunction with libvirt's virNetSockets for ssh transport instead of
spawning "ssh" client process.
This implemetation supports tunneled plaintext, keyboard-interactive,
private key, ssh agent based and null authentication. Libvirt's Auth
callback is used for interaction with the user. (Keyboard interactive
authentication, adding of host keys, private key passphrases). This
enables seamless integration into the application using libvirt. No
helpers as "ssh-askpass" are needed.
Reading and writing of OpenSSH style "known_hosts" files is supported.
Communication is done using SSH exec channel, where the user may specify
arbitrary command to be executed on the remote side and reads and writes
to/from stdin/out are sent through the ssh channel. Usage of stderr is
not (yet) supported.
Move the functions the parse/format, and validate PCI addresses to
their own file so they can be conveniently used in other places
besides device_conf.c
Refactoring existing code without causing any functional changes to
prepare for new code.
This patch makes the code reusable.
Signed-off-by: Shradha Shah <sshah@solarflare.com>
'make distcheck' fails because the generated ESX and HyperV files
are (intentionally) marked read-only, but since the stamp file was
missing, make assumes they need to be rebuilt. Shipping the stamp
file solves the problem.
* src/Makefile.am (EXTRA_DIST): Ship stamp files.
The following config elements now support a <vlan> subelements:
within a domain: <interface>, and the <actual> subelement of <interface>
within a network: the toplevel, as well as any <portgroup>
Each vlan element must have one or more <tag id='n'/> subelements. If
there is more than one tag, it is assumed that vlan trunking is being
requested. If trunking is required with only a single tag, the
attribute "trunk='yes'" should be added to the toplevel <vlan>
element.
Some examples:
<interface type='hostdev'/>
<vlan>
<tag id='42'/>
</vlan>
<mac address='52:54:00:12:34:56'/>
...
</interface>
<network>
<name>vlan-net</name>
<vlan trunk='yes'>
<tag id='30'/>
</vlan>
<virtualport type='openvswitch'/>
</network>
<interface type='network'/>
<source network='vlan-net'/>
...
</interface>
<network>
<name>trunk-vlan</name>
<vlan>
<tag id='42'/>
<tag id='43'/>
</vlan>
...
</network>
<network>
<name>multi</name>
...
<portgroup name='production'/>
<vlan>
<tag id='42'/>
</vlan>
</portgroup>
<portgroup name='test'/>
<vlan>
<tag id='666'/>
</vlan>
</portgroup>
</network>
<interface type='network'/>
<source network='multi' portgroup='test'/>
...
</interface>
IMPORTANT NOTE: As of this patch there is no backend support for the
vlan element for *any* network device type. When support is added in
later patches, it will only be for those select network types that
support setting up a vlan on the host side, without the guest's
involvement. (For example, it will be possible to configure a vlan for
a guest connected to an openvswitch bridge, but it won't be possible
to do that for one that is connected to a standard Linux host bridge.)
To allow for the possibility of vlan "trunks", which have more than
one vlan tag associated with them, we need a vlan struct. Since it
will be used by multiple files in src/util, src/conf, src/network, and
src/qemu, it must be defined in src/util. Unfortunately there isn't
currently a common file for simple netdev data definitions, so I
created a new file.
