Few minor changes in qemu since the last update:
- 'cocoa' display and corresponding props (not present in this build)
Changes in build:
- dbus display driver re-enabled
- gtk display support re-disabled
- xen support re-disabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the 'disk-cdrom-network' to cover this instance. This also
validates that the parameters of -blockdev conform to the QAPI schema.
Also add the xml2xml variant of this test case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reject encryption requests for unsupported image format types.
Add negative test for the rejected cases as well as modify
'disk-network-rbd-encryption' case to validate that with librbd
encryption the format doesn't matter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was supposed to test the behavior when
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT is present, but these
days that's always the case and pseries-cpu-compat already
provides all the coverage we need.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The capability is not used anymore since "-incoming defer" is supported
by all QEMU versions we care about.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Also, validate that the requested feature is supported by QEMU.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce QEMU_CAPS_VIRTIO_RSS capability which tracks
virtio-net.rss attribute introduced in qemu-5.2.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Added "rss" and "rss_hash_report" configuration that should be
used with qemu virtio RSS. Both options are triswitches. Used as
"driver" options and affects only NIC with model type "virtio".
In other patches - options should turn on virtio-net RSS and hash
properties.
Signed-off-by: Andrew Melnychenko <andrew@daynix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The property is parsed using virTristateBoolTypeFromString() but
formatted as if it was a regular bool, which results in the
following incorrect conversion:
BOOL_ABSENT -> managed='no'
BOOL_YES -> managed='yes'
BOOL_NO -> managed='yes'
Use the virTristateBoolTypeToString() helper to ensure the
setting can survive a roundtrip conversion.
Fixes: 4b4a981d60
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Found when building on Fedora 36 on s390x.
C compiler for the host machine: gcc (gcc 12.0.1 "gcc (GCC) 12.0.1 20220308 (Red Hat 12.0.1-0)")
C linker for the host machine: gcc ld.bfd 2.37-24
In function ‘cpuTestUpdateLiveCompare’,
inlined from ‘cpuTestUpdateLive’ at ../dist-unpack/libvirt-8.2.5/tests/cputest.c:784:12:
../dist-unpack/libvirt-8.2.5/tests/cputest.c:696:21: warning: potential null pointer dereference [-Wnull-dereference]
696 | featAct->policy == VIR_CPU_FEATURE_REQUIRE) ||
| ~~~~~~~^~~~~~~~
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting with qemu-3.1 we always have the '-overcommit' argument and use
it instead of '-realtime'. Remove the capability check and fix all
fake-caps tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The flag was based on a version check which no longer made sense. Remove
the flag by replacing it's only use by an arch-check which is equivalent
at this point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All qemu versions now support FD passing either directly or via FDset.
Assume that we always have this capability so that we can simplify
chardev handling in many cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will raise the minimum required qemu version to 3.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu needs to be an integrated device, and our address
assignment code will make sure that is the case. If the user has
provided an explicit address, however, we should make sure any
addresses pointing to a different bus are rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu is a PCI device and attempts to use a different
address type should be rejected.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The device is configured to be an integrated endpoint, as is
necessary for it to function correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virtio-iommu doesn't work without ACPI, so we need to make sure
the latter is enabled.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the boot-bypass
property of the virtio-iommu-pci device.
This property was only introduced in QEMU 7.0 but, since the
device has been around for much longer, we end up querying its
properties for several more releases. As I don't have convenient
access to the 10+ binaries necessary to regenerate the replies,
I just put some fake data in there.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This capability detects the availability of the virtio-iommu-pci
device.
Note that, while this device is present even in somewhat old
versions of QEMU, it's only some recent changes that made it
actually usable for our purposes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
This causes the argument to -device to be generated in JSON
format, same as what 1a691fe1c8 has done for x86_64.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The QEMU binary is built from the v7.0.0-rc2 tag.
Some of the additional capabilities that show up are a
consequence of more features being enabled in this build than
in the one used to generate the replies initially.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
While commit a5e659f0 removed the restriction against multiple queues
for the vdpa net device, there were some missing pieces. Configuring a
device statically and then starting the domain worked as expected, but
hotplugging a device didn't have the expected multiqueue support
enabled. Add the missing bits.
Consider the following device xml:
<interface type="vdpa">
<mac address="00:11:22:33:44:03" />
<source dev="/dev/vhost-vdpa-0" />
<model type="virtio" />
<driver queues='2' />
</interface>
Without this patch, hotplugging the above XML description resulted in
the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
With the patch, hotplugging results in the following:
{"execute":"netdev_add","arguments":{"type":"vhost-vdpa","vhostdev":"/dev/fdset/0","queues":2,"id":"hostnet1"},"id":"libvirt-392"}
{"execute":"device_add","arguments":{"driver":"virtio-net-pci","mq":true,"vectors":6,"netdev":"hostnet1","id":"net1","mac":"00:11:22:33:44:03","bus":"pci.5","addr":"0x0"},"id":"libvirt-393"}
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2024406
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apply the user-requested changes to the device definition as requested
by the <qemu:deviceOverride> element from the custom qemu XML namespace.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/287
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 06c960e477.
Turns out, this feature is not needed and QEMU will fix TSC
without any intervention from outside.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>P
QEMU 7.0.0 adds a new property tsc-clear-on-reset to x86 CPU, corresponding
to Libvirt's <tsc on_reboot="clear"/> element. Plumb it in the validation,
command line handling and tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that all tests are run after the helpers and mocks are
(re)built. This enables for example using "meson test" as the
command line passed to "git bisect run".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let's generate prealloc-threads property onto the cmd line if
domain configuration requests so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The prealloc-threads is property of memory-backend class which is
parent to the other three classes memory-backend-{ram,file,memfd}.
Therefore the property is present for all, or none if QEMU is
older than v5.0.0-rc0~75^2~1^2~3 which introduced the property.
Anyway, the .reserve property is the same story, and we chose
memory-backend-file to detect it, so stick with our earlier
decision and use the same backend to detect this new property.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since its v5.0.0 release QEMU is capable of specifying number of
threads used to allocate memory. It defaults to 1, which may be
too low for humongous guests with gigantic pages.
In general, on QEMU cmd line level it is possible to use
different number of threads per each memory-backend-* object, in
practical terms it's not useful. Therefore, use <memoryBacking/>
to set guest wide value and let all memory devices 'inherit' it,
silently. IOW, don't introduce per device knob because that would
only complicate things for a little or no benefit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
schemas are used for more than just documentation,
virsh edit fails if schemas are not available.
Therefore, fix the no-docs build by moving schemas/
to the parsing code inside src/conf/.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In cases when the hostname of the NBD server doesn't match the hostname
in the TLS certificate the new attribute 'tlsHostname' can be used to
override it.
Add the XML infrastructure and tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Detect that qemu can override TLS hostname setting for NBD clients.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-2296-g9f0369efb0
Notable changes:
- 'tls-hostname' field for NBD client to override local hostname
- machine types 'pc-i440fx-1.7' and older are now deprecated
- 'snapshot-access' block driver added
- The 'protocol' field of 'set_password' and 'expire_password'
parameter is now an enum instead of a pure string allowing 'vnc' and
'spice' as value and the arguments are also covered by the schema.
- 'copy-before-write' block driver now has a 'bitmap' property
- 'query-migrate' now reports 'precopy-bytes', 'downtime-bytes',
'postcopy-bytes' for 'ram' and 'disk' statistics
- RTC_CHANGE event now has a 'qom-path' property to identify the RTC
- 'umip' cpu feature is now migratable
- SGX property 'section-size' reinstated after regression
Changes in build setting:
- fuse block export support now enabled
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All callers except the one in the 'esx' driver pass the flag. The 'esx'
driver has a check that 'def->ndisks' is zero after parsing the
definition. This means that we can simply always parse the disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Long ago we adapted to Linux kernel changes which inverted the
behaviour of the conntrack --ctdir setting:
commit a6a04ea47a
Author: Stefan Berger <stefanb@us.ibm.com>
Date: Wed May 15 21:02:11 2013 -0400
nwfilter: check for inverted ctdir
Linux netfilter at some point (Linux 2.6.39) inverted the meaning of the
'--ctdir reply' and newer netfilter implementations now expect
'--ctdir original' instead and vice-versa.
We check for the kernel version and assume that all Linux kernels with version
2.6.39 have the newer inverted logic.
Any distro backporting the Linux kernel patch that inverts the --ctdir logic
(Linux commit 96120d86f) must also backport this patch for Linux and
adapt the kernel version being tested for.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Given our supported platform targets, we no longer need to
consider a version of Linux before 2.6.39, so can drop
support for the old direction behaviour.
The test suite updates are triggered because that never
probed for the ctdir direction, and so the iptables syntax
generator unconditionally dropped the ctdir args.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Long ago we adapted to iptables changes by introducing support
for '-m conntrack':
commit 06844ccbaa
Author: Stefan Berger <stefanb@us.ibm.com>
Date: Tue Aug 6 20:30:46 2013 -0400
nwfilter: Use -m conntrack rather than -m state
Since iptables version 1.4.16 '-m state --state NEW' is converted to
'-m conntrack --ctstate NEW'. Therefore, when encountering this or later
versions of iptables use '-m conntrack --ctstate'.
Given our supported platform targets, we no longer need to
consider a version of iptables before 1.4.16, so can drop
support for the old syntax.
The test suite updates are triggered because that never
probed for the new syntax, and so unconditionally
generated the old syntax.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When libc uses a define to rewrite stat64 to stat our mocks do not work if they
are chained because the symbol that we are looking up is being stringified and
therefore preventing the stat64->stat expansion per C-preprocessor rules. One
stringification macro is just enough to make it work.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We have couple of tests where the obsolete IPv4-in-IPv6 notation
is used (::10.1.2.3). Change them to the correct format
(::ffff:10.1.2.3).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two standards how IPv4 address in IPv6 can be
expressed:
::10.1.2.3
::ffff:10.1.2.3
The former is obsolete and the latter should be used instead [1].
Add test cases to our sockettest to exercise parsing/formatting
of the valid address format.
1: https://datatracker.ietf.org/doc/html/rfc4291#section-2.5.5.1
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Apparently clang was fixed as it no longer considers having
global variables static a problem. Make the variables static to
be sure they aren't used outside of the source file.
This effectively reverts v1.0.6-rc1~198 which started the trend.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way that vircgroupmock works is that the vircgrouptest
creates a temporary directory and sets LIBVIRT_FAKE_ROOT_DIR env
variable which is then checked by the mock at the beginning of
basically every function it overrides (access(), stat in all its
flavours, mkdir(), etc.). The mock then creates a CGroup dir
structure. But the test is allowed to change the directory, to
accommodate environment for the particular test case. This is
done by changing the environment variable which is then detected
by the mock and the whole process repeats.
However, the way the mock detect changes is buggy. After it got
the environment variable it compares it to the last known value
(global variable @fakerootdir) and if they don't match the last
known value is set to point to the new value. Problem is that the
result of getenv() is assigned to the @fakerootdir directly.
Therefore, @fakerootdir points somewhere into the buffer of
environment variables. In turn, when the test sets new value (via
g_setenv()) it may be placed at the very same position in the env
var buffer and thus the mock fails to detect the change.
The solution is to keep our private copy of the value (by
g_strdup()) which makes the variable not rely on
getenv()/setenv() placing values at random positions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the 'nvram_template' entry is mandatory when parsing the
firmware descriptor based on flash. QEMU is extending the firmware
descriptor spec to make the 'nvram_template' optional, depending
on the value of a new 'mode' field:
- "split"
* "executable" contains read-only CODE
* "nvram_template" contains read-write VARS
- "combined"
* "executable" contains read-write CODE and VARs
* "nvram_template" not present
- "stateless"
* "executable" contains read-only CODE and VARs
* "nvram_template" not present
In the latter case, the guest OS can write vars but the
firmware will make no attempt to persist them, so any changes
will be lost at poweroff.
For now we parse this new 'mode' but discard any firmware
which is not 'mode=split' when matching for a domain.
In the tests we have a mixture of files with and without the
mode attribute.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By using the auto-generated NVRAM path in test data files, we won't see
bugs where a user specified path gets accidentally overwritten by a
post-parse callback, or VM startup. For example, this caused us to miss
the bug fixed by:
commit 24adb6c7a6
Author: Michal Prívozník <mprivozn@redhat.com>
Date: Wed Feb 23 08:50:44 2022 +0100
qemu: Don't regenerate NVRAM path if parsed from domain XML
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When building the default memory backend (which has id='pc.ram')
and no guest NUMA is configured then
qemuBuildMemCommandLineMemoryDefaultBackend() is called. However,
its return value is ignored which means that on invalid
configuration (e.g. when non-existent hugepage size was
requested) an error is reported into the logs but QEMU is started
anyway. And while QEMU does error out its error message doesn't
give much clue what's going on:
qemu-system-x86_64: Memory backend 'pc.ram' not found
While at it, introduce a test case. While I could chose a nice
looking value (e.g. 4MiB) that's exactly what I wanted to avoid,
because while such value might not be possible on x84_64 it may
be possible on other arches (e.g. ppc is notoriously known for
supporting wide range of HP sizes). Let's stick with obviously
wrong value of 5MiB.
Reported-by: Charles Polisher <chas@chasmo.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This demonstrates that
<os>
<loader readonly='yes' type='pflash'>/usr/share/OVMF/OVMF_CODE.fd</loader>
<nvram template="/usr/share/OVMF/OVMF_VARS.fd"/>
</os>
gets expanded to give a per-VM NVRAM path.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The following is expected to raise an error:
<os>
<loader readonly='yes' type='pflash'/>
</os>
because no path to the pflash loader is given and there is
no default built-in.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit b56a833243 removed bunch of old code after which
'demo_socket_path' in 'testActivationFDNames' is no longer used
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The systemd version in RHEL-7 lacked support for the LISTEN_FDNAMES env
variable with socket activation. Since we stopped targetting RHEL-7 we
can drop some considerable amount of compatibility code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The minimal supported version of QEMU is 2.11. And after capabilities
for older QEMUs were dropped in v7.3.0-17-g184de10c1d we have some
domaincapsdata/ files that are never read. This is because
domaincapstest uses testQemuCapsIterate() which iterates over
qemucapabilitiesdata/caps_*.xml files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All modern QEMU versions use FD passing for listening unix sockets so
the test should reflect this. This will later help when removing the
legacy code paths when we drop support for old QEMUs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't want to be dealing with real FDs thus we mock
'qemuMonitorIOWriteWithFD' to do the same thing as when no FD is being
passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the declaration of the struct into 'qemu_monitor_priv.h' as other
code has no business in peeking into the monitor messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will remove support for qemu-2.12. Since tests of
'sev' use hacked data we need to use our capability dump of qemu-6.0 as
it has the required fields.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Originally when I started working on '-blockdev' support I added version
locked variants of all the relevant disk tests locked to qemu-2.12, but
blockdev was finally enabled with qemu-4.2.
This patch bumps the rest of the test cases with no functional changes
related to disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property was added in qemu-4.0. Since upcoming patch
will be modernizing all disk test cases we specifically want to preserve
the instance of 'device_id' not being used with qemu-3.1 and earlier.
Change the 'disk-cache' and 'disk-shared' cases to have a qemu-3.1 and a
qemu-4.1 version for testing pre-'device_id' and pre-blockdev scenarios.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Starting with qemu-3.0 release we use the 'werror' and 'rerror'
properties with the frontend (device) rather than the storage backend
(with a minor caveat of s390, where we use it earlier as it doesn't
support USB disks, and other disk types supported it earlier).
Add specific test cases after the change, but before '-blockdev' was
enabled.
This is done separately from the changes in the next commit which simply
moves all other disk tests to the last pre-blockdev qemu as we have a
semantic change happening after 2.12.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 'cancel_path' is constructed from the 'tpmdev' argument, we can
push it down into the function opening the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setup the chardev similarly to how we do it on startup so that virtlogd
is properly used with chardevs which are hotplugged to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the function doing the fake setup of chardev backend for FD passing
into the collection of qemu test helpers so that it can be used in
qemumonitorjsontest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The main objective of this patch is to use a proper instance of
virDomainChrSourceDef allocated with the private data.
To achieve this the test cases are grouped into blocks by how much they
fill in the chardev definition. Some test cases are moved around so
that the resulting sequence doesn't need extra clearing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Don't add the command to the test monitor when we don't expect to invoke
it rather than bypassing the test monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code uses fdsets for the pipe passed from virtlogd to qemu, but the
chardev hot-unplug code neglected to detach the fdset after the chardev
was removed. This kept the FDs open by qemu even after they were not
used any more.
After the refactor to use qemuFDPass for chardevs we now configure the
'opaque' field for fdsets used for chardevs so we can use
qemuHotplugRemoveFDSet to remove the unused fdset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the parts which already pass FDs via fdset or directly to use
the new infrastructure.
Apart from simpler code this also adds the appropriate names to the fds
in the fdsets which will allow us to properly remove the fdsets won
hot-unplug of chardevs, which we didn't do for now and resulted in
leaking the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefix the file descriptor name with the alias of the network device so
that it's similar to other upcoming use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code paths which don't wish to use FD passing are supposed to not call
the function which sets up the chardev for FD passing.
This is ensured by calling it only in the host prepare step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add test cases for quotes appearing in the netcat parameter,
for the default behavior of proxy=auto where virt-ssh-helper
is used if available, and for proxy=native.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the test cases all follow the proxy=auto behavior, but
we want to add coverage for other proxy modes as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The important part of the value we assign to "netcat" is that it
contains whitespace, so drop everything else to highlight this
fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Having the actual script indented and the closing quote on a
separate line, like
sh -c '
if foo; then
bar;
fi
'
makes things more readable and easier to scan visually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Make this test case consistent with all the other ones.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test the behavior of virBufferEscapeShell for different types of
quotes as well as the empty string.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The test dumps for x86_64 and ppc64 were generated from pre-release
qemu-3.0-rc1/rc2 and thus wouldn't pass our minimum version check.
As these are very old, fix the version info we use for our check to 3.1
without re-generating them and keep the version tag intact.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'disk-cache' output file is identical in the interesting parts
(everything besides CPU config) to the '-latest' version, so the
versioned invocation can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tests testVirPCIVPDReadVPDBytes and testVirPCIVPDParseFullVPDInvalid
failed to properly close open fildescriptors in some cases. Let's fix it
by switching to VIR_AUTOCLOSE in the whole file.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When the <loader> had an explicit readonly='no' attribute we
accidentally still marked the plfash as readonly due to the
bad conversion from virTristateBool to bool. This was missed
because the test cases run with no capabilities set and thus
are validated the -drive approach for pflash configuration,
not the -blockdev approach.
This affected the following config:
<os>
<loader readonly='no' type='pflash'>/var/lib/libvirt/qemu/nvram/test-bios.fd</loader>
</os>
for the sake of completeness, we also add a test XML config
with no readonly attribute at all, to demonstrate that the
default for pflash is intended to be r/w.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This change was generated using the following spatch:
@ rule1 @
expression a;
identifier f;
@@
<...
- f(*a);
... when != a;
- *a = NULL;
+ g_clear_pointer(a, f);
...>
@ rule2 @
expression a;
identifier f;
@@
<...
- f(a);
... when != a;
- a = NULL;
+ g_clear_pointer(&a, f);
...>
Then, I left some of the changes out, like tools/nss/ (which
doesn't link with glib) and put back a comment in
qemuBlockJobProcessEventCompletedActiveCommit() which coccinelle
decided to remove (I have no idea why).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all code using the 'QOM_CPU_PATH' macro to accept the QOM path
as an argument.
For now the new helper for fetching the path 'qemuProcessGetVCPUQOMPath'
will always return the same hard-coded value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As the parent address is part of the mdev nodedev name lets expose the
internally available parent address in the XML.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SmartNIC DPUs may not expose some privileged eswitch operations
to the hypervisor hosts. For example, this happens with Bluefield
devices running in the ECPF (default) mode for security reasons. While
VF MAC address programming is possible via an RTM_SETLINK operation,
trying to set a VLAN ID in the same operation will fail with EPERM.
The equivalent ip link commands below provide an illustration:
1. This works:
sudo ip link set enp130s0f0 vf 2 mac de:ad:be:ef:ca:fe
2. Setting (or clearing) a VLAN fails with EPERM:
sudo ip link set enp130s0f0 vf 2 vlan 0
RTNETLINK answers: Operation not permitted
3. This is what Libvirt attempts to do today (when trying to clear a
VF VLAN at the same time as programming a VF MAC).
sudo ip link set enp130s0f0 vf 2 vlan 0 mac de:ad:be:ef:ca:fe
RTNETLINK answers: Operation not permitted
If setting an explicit VLAN ID results in an EPERM, clearing a VLAN
(setting a VLAN ID to 0) can be handled gracefully by ignoring the
EPERM error with the rationale being that if we cannot set this state
in the first place, we cannot clear it either.
In order to keep explicit clearing of VLAN ID working as it used to
be passing a NULL pointer for VLAN ID is used.
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There should be a way to show no intent in programming a VLAN at all
(including clearing it). This allows handling error conditions
differently when VLAN clearing is explicit (vlan id == 0) vs implicit
(vlanid == NULL - try to clear it if possible).
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This has a benefit of being able to handle error codes for those
operations separately which is useful when drivers allow setting a MAC
address but do not allow setting a VLAN (which is the case with some
SmartNIC DPUs).
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The XML-to-XML test validates that we don't accidentally copy the
isa-debug <serial> into a <console>.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is a perfectly valid configuration that we need to keep
working, so add test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently, memory device (def->mems) part of cmd line is
generated before any controller. In majority of cases it doesn't
matter because neither of memory devices live on a bus that's
created by an exposed controller (e.g. there's no DIMM
controller, at least not exposed). Except for virtio-mem and
virtio-pmem, which do have a PCI address. And if it so happens
that the device goes onto non-default bus (pci.0) starting such
guest fails, because the controller that creates the desired bus
wasn't processed yet. QEMU processes arguments in order.
For instance, if virtio-mem has address with bus='0x01' QEMU
refuses to start with the following message:
Bus 'pci.1' not found
Similarly for virtio-pmem. I've successfully tested migration and
changing the order does not affect migration stream.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2047271
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Inside the testPCIVPDResourceCustomCompareIndex() function we
have two variables @a and @b, both marked as g_autoptr(). Then,
towards the end of the function b->value is freed and set to
a->value. This is to make sure
virPCIVPDResourceCustomCompareIndex() works correctly even if
->value member is the same for both arguments.
Nevertheless, if the function returns anything else than 0 then
the control executes subsequent return statement and since
b->value points to the very same string as a->value a double free
will occur. Avoid this by setting b->value to NULL explicitly,
just like we are already doing for the successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
There are a few places where a variable is VIR_FREE()-d and then
explicitly set to NULL. This is not necessary since VIR_FREE()
does that for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since its introduction in
commit 907a39e735
Add a test suite for validating SELinux labelling
this function did not return NULL on OOM.
Since we abort on OOM now, switch testSELinuxMungePath to void,
return NULL explicitly on XML parsing failure and remove
the (now pointless) cleanup label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reporting hv-* properties properly requires hv to be enabled,
see qemu commit 071ce4b03b.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are a some scenarios in which we want to prealloc guest
memory (e.g. when requested in domain XML, when using hugepages,
etc.). With 'regular' <memory/> models (like 'dimm', 'nvdimm' or
'virtio-pmem') or regular guest memory it is corresponding
memory-backend-* object that ends up with .prealloc attribute
set. And that's desired because neither of those devices can
change its size on the fly. However, with virtio-mem model things
are a bit different. While one can set .prealloc attribute on
corresponding memory-backend-* object it doesn't make much sense,
because virtio-mem can inflate/deflate on the fly, i.e. change
how big of a portion of the memory-backend-* object is exposed to
the guest. For instance, from a say 4GiB module only a half can
be exposed to the guest. Therefore, it doesn't make much sense to
preallocate whole 4GiB and keep them allocated. But we still want
the part exposed to the guest preallocated (when conditions
described at the beginning are met).
Having said that, with new enough QEMU the virtio-mem-pci device
gained new attribute ".prealloc" which instructs the device to
talk to the memory backend object and allocate only the requested
portion of memory.
Now, that our algorithm for setting .prealloc was isolated in a
single function, the function can be called when constructing cmd
line for virtio-mem-pci device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new capability tracks whether virtio-mem device is capable
of memory preallocation, which is detected by the device having
.prealloc attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to use a hardcoded list of capabilities because we don't
yet have proper replies files obtained from QEMU running on actual
macOS machines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new DO_TEST_MACOS() macro makes it possible to create test
cases that verify the behavior of libvirt on a macOS machine
with HVF support available.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This exposes a couple of macOS-specific variants of existing
APIs, which can be used when implementing test programs and
result in HVF support being advertised.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This new enumeration provides a way to specify the host OS
that a specific test case expects. The default is Linux, which
has been the implicit host OS until now; when Linux is selected
as the host OS, KVM support is advertised in capabilies data
exposed to test cases.
This commit doesn't result in any functional change, and simply
sets the stage for introducing macOS host OS support later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Tested-by: Brad Laue <brad@brad-x.com>
Tested-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When trying to attach vhost-user-blk device to virtual machine using
qemu < 4.2 libvirt would mistakenly add a scsi=off parameter, which is
not supported by qemu.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/265
Signed-off-by: shenjiatong <yshxxsjt715@gmail.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With qemu versions prior to qemu-5.0 we'll format 'scsi=off' for
virtio-blk disks, but also for vhost-user-blk. This is a bug as it's not
supported.
Add a test case to show that wrong configuration is generated by adding
running 'disk-vhostuser' test case on capabilities from qemu-4.2.
For this to be possible it's required to enable shared memory via NUMA
configuration as old QEMU's don't allow configuration of the default
memory backend. This is achieved by adding a copy of the
'disk-vhostuser' XML with NUMA enabled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
After previous cleanups, the virDomainNetDefParseXML() function
uses a mixture of virXMLProp*() and the old virXMLPropString() +
virXXXTypeFromString() patterns. Rework it so that virXMLProp*()
is used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update existing ppc64 6.2 caps to match what was released in QEMU 6.2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Changes in all 'ppc64-latest.ags' files were needed due to the
JSONification of command line devices.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Since there's no capability to check now, we can simply move the
formatting of 'max_outputs' earlier.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both are supported by qemu-2.11 and later, so we don't have to check for
them explicitly.
Note that QXL is supported only on x86_64, thus on other arches only the
capability for 'virtio-gpu' is removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both the QXL video device and 'virtio' video device support
'max_outputs' in all qemu versions libvirt supports. This means we no
longer have to check the QEMU_CAPS_QXL_MAX_OUTPUTS and
QEMU_CAPS_VIRTIO_GPU_MAX_OUTPUTS capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It was only used to construct the hash key for the (now removed)
shared devices in the qemu driver.
Remove it and its mocking.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
No kernels supported by upstream libvirt have the feature.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This device was virtio 1.0-only so adding the (non-)transitional model
did not make sense and it was only present in QEMU 4.0.
Report a validation error for both of the users that will ever hit this
code path.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Now that looking up dnsmasq is handled/mocked we can start
checking whether dnsmasq capabilities were built successfully and
error out if that wasn't the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
DISCLAIMER: dnsmasq capabilities are empty as of v8.0.0-rc1~145.
In a real environment the dnsmasq capabilities are constructed
using dnsmasqCapsNewFromBinary(). We also have
dnsmasqCapsNewFromBuffer() to bypass checks that real code is
doing and just get capabilities object. The latter is used from
test suite.
However, with a little bit of mocking we can test the real life
code. All that's needed is to simulate dnsmasq's output for
--version and --help and mock a stat() that's done in
dnsmasqCapsRefreshInternal().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While it's true that our virCommand subsystem is happy with
non-absolute paths, the dnsmasq capability code is not. It stores
the path to dnsmasq within and makes it accessible via
dnsmasqCapsGetBinaryPath(). While strictly speaking no caller
necessarily needs canonicalized path, let's find dnsmasq once and
cache the result.
Therefore, when constructing the capabilities structure look up
the binary path. If DNSMASQ already contains an absolute path
then virFindFileInPath() will simply return a copy.
With this code in place, the virFileIsExecutable() check can be
removed from dnsmasqCapsRefreshInternal() because
virFindFileInPath() already made sure the binary is executable.
But introducing virFindFileInPath() means we have to mock it in
test suite because dnsmasqCaps are created in
networkxml2conftest.
Moreover, we don't need to check for dnsmasq in configure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
We don't query any capabilities of dnsmasq. We are only
interested in dnsmasq's version (obtained via 'dnsmasq
--version'). Therefore, there's no point in running 'dnsmasq
--help'. Its output is not processed even.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The dnsmasqCaps type has its own cleanup function defined and
ready to use via g_autoptr(). Use automatic cleanup instead of
an explicit one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If a test binary is executed with an argument then usage
information is printed out (that no arguments are accepted and
what environment variables affect execution). The string is
printed onto stderr but it is not terminated with a newline
character producing not so nice output.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that qemu fixed device unplug when JSON syntax is used with -device
we can re-enable the feature.
Since the old capability string representation is condemned by
suggesting filtering it as a workaround we must introduce a new string.
To achieve this the original capability position is renamed to
X_QEMU_CAPS_DEVICE_JSON_BROKEN_HOTPLUG and a new position with the
original name QEMU_CAPS_DEVICE_JSON is introduced to prevent us having
to change the rest of the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to commit v6.2.0-874-g1cd2ad11d3
Notable changes are:
- added flag noting that use of JSON syntax for -device was fixed
- 'dbus' backend for graphics and character devices added
- virtio-mem added 'node' property
- 'clusters' added to CPU topology
- 'open-timeout' property for NBD protocol backend
- 'wheel-left' and 'wheel-right' event types for 'input-send-event'
- increased default resolution to '1280x800' on 'virtio-gpu'
- SGX property 'section-size' changed to 'sections' incompatibly
(unused luckily)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The machine type doesn't change the test result and prevents tests being
changed every time we are about to update real capabilities to a new
qemu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are two tests currently that simulate QMP talk:
qemucapabilitiestest and qemuhotplugtest. In both cases they
check whether currently executed command is the one for which
reply was provided. If not an error message is reported. However,
the error message contains only the actual command and not the
expected one. This makes it harder to navigate through .replies
files.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
VM XML accepts target.port but this does not get passed while
building the QEMU command line for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This commit takes care of following cases:
-> Check availability of requested ports.
->The total number of requested ports should not be more than
VIR_MAX_ISA_SERIAL_PORTS.
->The ports requested should be less than VIR_MAX_ISA_SERIAL_PORTS.
->VIR_MAX_ISA_SERIAL_PORTS should correspond to MAX_ISA_SERIAL_PORTS
specified in QEMU code commit def337ffda34d331404bd7f1a42726b71500df22.
-> Prevent duplicate device assignments to the same port.
-> In case no ports are provided in the XML, this patch scans the list of unused
isa-serial indices to automatically assign available ports for this VM.
Signed-off-by: Divya Garg <divya.garg@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
