Reduce the scope of some variables and mark them as
g_autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Except for a few cases where freeing it explicitly
seems to be done on purpose.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The 'checkoutput' function does have a parameter for a possible
prefix, but it is now unused.
Introduced-by: 241ac07124
Used-by: 62f263a73e
Unused-since: 2dfacbffea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Note that 'numa-mem-supported' turned off for certain machine types
which in turn forced us to generate a newer command line in certain
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU is going to drop 'vxhs' in the upcoming release so we'll need to
track these separately to prevent test suite breakage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already test with real caps so there's no real need for this special
case. While it technically tested the state without TLS encryption key
secrets, it doesn't really matter that much.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'commandhelper' checks effectively whether the parent process is
still around to report whether it was daemonized or not.
This creates a unlikely race condition in cases when we do actually
daemonize the process as the intermediate process used for the
daemonization might not have terminated yet which would report wrong
result leading to test failure.
For now there's just 'test4' which actually daemonizes the process.
Add an argument '--check-daemonize' which asks for retries of the
daemonization check in cases where we expect that the commandhelper is
going to be daemonized and use it in 'test4' to make the test more
reliable.
I've observed the test failure sporadically when my box is under load
e.g. while building two trees at once.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When support for MAC addresses having a type='static|generated'
attribute was added in:
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
the VMX -> XML parser was not updated. As a result while we
accept the 'type' attribute on input, we never show it again
on 'output', so we loose information during the roundtrip.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
With the current formatter, the XML snippets:
<interface type='bridge'>
<mac address='00:0c:29:dd:ee:fe' type='static'/>
<source bridge='br1'/>
</interface>
<interface type='bridge'>
<mac address='aa:bb:cc:dd:ee:fd' type='generated'/>
<source bridge='br2'/>
</interface>
result in
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet1.checkMACAddress = "false"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "static"
ethernet2.address = "aa:bb:cc:dd:ee:fd"
ethernet2.checkMACAddress = "false"
which is flawed, as both type='static' and type='generated' in the XML
turn into 'static' in the VMX config.
The existence of the 'static' attribute is further overriding whether
the checkMACAddress config option is set as a side effect.
Both these pieces of flawed logic were introduced in
commit 454e5961ab
Author: Bastien Orivel <bastien.orivel@diateam.net>
Date: Mon Jul 13 16:28:53 2020 +0200
Add a type attribute on the mac address element
which intentionally added the 'checkMACAddress' side effect based on
the 'type' attribute.
With this change, we're reverting the handling of checkMACAddress
to match what existed historically. The 'type' attribute now directly
maps to the addressType attribute, so the above config becomes:
ethernet1.present = "true"
ethernet1.networkName = "br1"
ethernet1.connectionType = "bridged"
ethernet1.addressType = "static"
ethernet1.address = "00:0c:29:dd:ee:fe"
ethernet2.present = "true"
ethernet2.networkName = "br2"
ethernet2.connectionType = "bridged"
ethernet2.addressType = "generated"
ethernet2.generatedAddress = "aa:bb:cc:dd:ee:fd"
ethernet2.generatedAddressOffset = "0"
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mingw header define time() as a static inline function and this
causes a duplicate definition build failure. Since we're not using the
LD_PRELOAD at all on Mingw, we ideally wouldn't compile any of the
mock libraries. Rather than change the build system now though, this
just stubs out the offending function.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The 'libvirt-tmp-activewrite' bitmap is added during the 'pivot'
operation of block copy and active layer block commit operations
regardless of whether there are any bitmaps to merge, but was not
removed unless a bitmap was merged. This meant that subsequent attempts
to merge into the same image would fail.
Fix it by checking whether the 'libvirt-tmp-activewrite' would be used
by the code and don't skip the code which would delete it.
This is a regression introduced when we switched to the new code for
block commit in <20a7abc2d2d> and for block copy in <7bfff40fdfe5>. The
actual bug originates from <4fa8654ece>.
https://bugzilla.redhat.com/show_bug.cgi?id=1857735
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
g_new() is used in only 3 places. Switching them to g_new0() will do
no harm, reduces confusion, and helps me sleep better at night knowing
that all allocated memory is initialized to 0 :-) (Yes, I *know* that
in all three cases the associated memory is immediately assigned some
other value. Today.)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When upgrading from a libvirt which didn't format private data of a
virStorageSource representing an iSCSI hostdev source, we might need to
generate some internal data so that the code still works as if it was
present in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will need to add another flag for the function so
convert it to a bitwise-or'd array of flags to prevent having 4
booleans.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we've used security_context_t for variables passed
to libselinux APIs. But almost 7 years ago, libselinux developers
admitted in their API that in fact, it's just a 'char *' type
[1]. Ever since then the APIs accept 'char *' instead, but they
kept the old alias just for API stability. Well, not anymore [2].
1: 9eb9c93275
2: 7a124ca275
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
If the host doesn't have a single IPv4 address assigned to any of
its interfaces, not even the loopback one, then virnetsockettest
will fail with
Cannot identify IPv4/6 availability
because, while the IPv6 bind attempt is conditional, the IPv4 one
is not, and in this case it will always fail.
This commit is better viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All of the listed functions are available in libselinux version 2.2.
Our supported OSes start with version 2.5 so there is no need to check
it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The old code works correctly with make and running directly from shell
but it failed with Meson test suite where session ID and process group
are the same in both cases.
What changes in both cases is parent process ID so use that instead of
session ID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All supported OSes have at least libselinux version 2.5 so it's safe
to drop this check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This was introduced together with clock-time gnulib module by commit
<d74e5a4dfc434d3a1d01856d013a7f50d910fa95> and removed from libvirt
by commit <86d223a762990c9d529065a2d3b30b6a00ea63dd>.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Set FLAT_NAMESPACE_FLAGS to -Wl,-flat_namespace in configure only for
macOS and use it unconditionally in Makefiles.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability tracks whether QEMU is capable of defining HMAT
ACPI table for the guest.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This test case checks that expanding NUMA distance works. On
input we accept if only distance from A to B is specified. On the
output we format the B to A distance too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 82576d8f35 used a string "on" to enable the 'pmem' property.
This is okay for the command line visitor, but the property is declared
as boolean in qemu and thus it will not work when using QMP.
Modify the type to boolean. This changes the command line, but
fortunately the command line visitor in qemu parses both 'yes' and 'on'
as true for the property.
https://bugzilla.redhat.com/show_bug.cgi?id=1854684
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Call the post-processing function so that we can validate that it does
the correct thing.
virDomainBackupAlignDisks requires disk definitions to be present so
let's fake them by copying disks from the backup definition and add one
extra disk 'vdextradisk'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Replace the output by a copy of the input file for further changes once
we start testing virDomainBackupAlignDisks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add fields for storing the aliases necessary to clean up the TLS env for
a backup job after it finishes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There are few internal fields of the backup XML. Propagate the
'internal' flag so that the test can verify the XML infrastructure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Avoid printing '0' size in case when we weren't able to determine the
backup size by adding a flag whether the size is valid and interlock
printing of the field according to the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a dummy secret so that we see what command line is generated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Store the required data in the private data of a storage source and
ensure that the 'alias' of the secret is formatted in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With the recent update of Fedora rawhide I've noticed
virnettlssessiontest and virnettlscontexttest failing with:
Our own certificate servercertreq-ctx.pem failed validation
against cacertreq-ctx.pem: The certificate uses an insecure
algorithm
This is result of Fedora changes to support strong crypto [1]. RSA
with 1024 bit key is viewed as legacy and thus insecure. Generate
a new private key then. Moreover, switch to EC which is not only
shorter but also not deprecated that often as RSA. Generated
using the following command:
openssl genpkey --outform PEM --out privkey.pem \
--algorithm EC --pkeyopt ec_paramgen_curve:P-384 \
--pkeyopt ec_param_enc:named_curve
1: https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If initializing test monitor in testQemuHotplugCpuPrepare()
fails, the control jumps to error label where
testQemuHotplugCpuDataFree() is called. But since the data->mon
is NULL due to aforementioned failure,
qemuMonitorTestGetMonitor() dereferences a NULL pointer leading
to a SIGSEGV.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add test with a ZPCI host device and a CCW memballoon device to ensure
that CCW address remains the default address assigned.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
1. Test for auto-generating uids while specifying valid fids
2. Test for auto-generating fids while specifying valid uids
3. Test for parse error while specifying a valid fid and an invalid
uid
4. Test for parse error while specifying two ZPCI devices with same
uid and fid addresses
5. Test for parse error when both uid and fid are set to zero
6. Test for error while specifying uid and not providing ZPCI
capability.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let us fix the issues with zPCI address validation and auto-generation
on s390.
Currently, there are two issues with handling the ZPCI address
extension. Firstly, when the uid is to be auto-generated with a
specified fid, .i.e.:
...
<address type='pci'>
<zpci fid='0x0000001f'/>
</address>
...
we expect uid='0x0001' (or the next available uid for the domain).
However, we get a parsing error:
$ virsh define zpci.xml
error: XML error: Invalid PCI address uid='0x0000', must be > 0x0000
and <= 0xffff
Secondly, when the uid is specified explicitly with the invalid
numerical value '0x0000', we actually expect the parsing error above.
However, the domain is being defined and the uid value is silently
changed to a valid value.
The first issue is a bug and the second one is undesired behaviour, and
both issues are related to how we (in-band) signal invalid values for
uid and fid. So let's fix the XML parsing to do validation based on what
is actually specified in the XML.
The first issue is also related to the current code behaviour, which
is, if either uid or fid is specified by the user, it is incorrectly
assumed that both uid and fid are specified. This bug is fixed by
identifying when the user specified ZPCI address is incomplete and
auto-generating the missing ZPCI address.
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The term "access control list" better describes the concept involved.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The term "permitted list" is a better choice for the filtering
logic applied.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When parsing domain XML post parse callbacks are run and one of
them might try and call API from a non-hypervisor driver (e.g.
just like qemuDomainDeviceNetDefPostParse() is doing - it calls a
network API). To avoid this in the test suite, set dummy drivers,
which renders all non-hypervisor APIs return error.
This mimics what qemuxml2argvtest does.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using the DO_TEST_PARSE_ERROR() macro, a failure to parse the input
file is considered a successful test. However, if the input file is
totally missing, that should be distinguished from a parsing error and
not be treated as a test success.
The function virDomainDefParseFile() simply returns NULL for any parse
failure, including a missing file. So we need to explicitly check
whether the file exists first, and fail the test if it is missing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Although a ramfb video device is not a PCI device, we don't currently
report an error for ramfb device definitions containing a PCI address.
However, a guest configured with such a device will fail to start:
# virsh start test1
error: Failed to start domain test1
error: internal error: qemu unexpectedly closed the monitor: 2020-06-16T05:23:02.759221Z qemu-kvm: -device ramfb,id=video0,bus=pcie.0,addr=0x1: Device 'ramfb' can't go on PCIE bus
A better approach is to reject any device definitions that contain PCI
addresses. While this is a change in behavior, any existing
configurations were non-functional.
https://bugzilla.redhat.com/show_bug.cgi?id=1847259
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
It's possible to use ramfb as the boot display of an assigned vgpu
device. This was introduced in 4b95738c, but unfortunately the attribute
was not formatted into the xml output for such a device. This patch
fixes that oversight and adds a xml2xml test to verify proper behavior.
https://bugzilla.redhat.com/show_bug.cgi?id=1847791
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The XML format used for QEMU capabilities is not required to be
stable across releases, as we invalidate the cache whenever the
libvirt binary changes.
We none the less always try to parse te entire XML file before
we do any validity checks. Thus if we change the format of any
part of the data, or change permitted values for enums, then
libvirtd logs will be spammed with errors.
These are not in fact errors, but an expected scenario.
This change makes the loading code validate the cache timestamp
against the libvirtd timestamp immediately. If they don't match
then we stop loading the rest of the XML file.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Add tests for both supported scenarios: a single TPM Proxy and
a TPM Proxy with a regular TPM device in the same domain.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This tests aims to exercise how a TPM Proxy device can be
added in the domain, either alone or with a regular TPM
device. It also ensures that we do not allow bogus scenarios
to slip by.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
A TPM Proxy device can coexist with a regular TPM, but the
current domain definition supports only a single TPM device
in the 'tpm' pointer. This patch replaces this existing pointer
in the domain definition to an array of TPM devices.
All files that references the old pointer were adapted to
handle the new array instead. virDomainDefParseXML() TPM related
code was adapted to handle the parsing of an extra TPM device.
TPM validations after this new scenario will be updated in
the next patch.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This trivial rework is aimed to reduce the amount of line changes
made by the next patch, when 'def->tpm' will become a 'def->tpms'
array.
Instead of using a 'switch' where only the VIR_DOMAIN_TPM_TYPE_EMULATOR
label does something, use an 'if' clause instead.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose the TPM Proxy support for PPC64 guests by creating a new
cap called QEMU_CAPS_DEVICE_SPAPR_TPM_PROXY.
This device is part of the machinery the guest need to orchestrate
with the PPC64 Ultravisor the transition to the Secure VM (SVM)
mode. Inside QEMU, this device will be used with the H_TPM_COMM
hypercall to connect with the TPM Resource Manager, enabling
the guest to open and close TPM sessions with the host TPM.
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format the address width attribute. Depending on the version of
QEMU it is named 'aw-bits' or 'x-aw-bits'.
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Integrate both 'disk-hostdev-scsi-virtio-iscsi-auth-AES' and
'hostdev-scsi-virtio-iscsi-auth' as the new test infrastructure tests
both legacy and 'secret' object cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Additionally this removes duplicated call of the same test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the authenticated iSCSI hostdevs to the same test file.
Additionally this now covers passing secret via the 'secret' object
rather than on the command line.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We can add the iSCSI hostdevs to the same test file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
"hostdev-scsi-readonly" case tests the readonly disk with a virtio-scsi
controller. Add it for the 'lsi' controller test as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu-2.8 didn't yet support QEMU_CAPS_ISCSI_PASSWORD_SECRET. This
version will allow integrating multiple test cases into one.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modernize the current state to the pre-blockdev version of qemu to
minimize changes. Later patch will add a 'latest' case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using virKModConfig would not simplify any existing code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
All callers except for the test suite pass the same value
for the second arg, so it can be removed, simplifying the
code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Test both 'basic' and 'snapshots' cases on shallow and deep copy modes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows the removal of the
ad-hoc implementation of bitmap merging for block copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
New semantics of the bitmap handling don't need this. Remove the field
and all uses of it including the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Simulate commit between all the combinations of layers in the
'snapshots' case to see whether the code merges the correct bitmaps with
the correct depth of temporary bitmaps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
In the 'basic' case we have few bitmaps in only the top layer. Simulate
commit into the backing of the top layer and also 2 levels deep.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removing the ad-hoc
implementation of bitmap merging for block commit. The new approach is
way simpler and more robust and also allows us to get rid of the
disabling of bitmaps done prior to the start as we actually do want to
update the bitmaps in the base.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'snapshots' case has multiple layers so we need to make sure that
the bitmaps are merged with the appropriate temporary bitmaps formatted
from the allocation bitmap for any backing chain layer above.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The 'basic' case is just a single backing store layer containing the
bitmaps so we just copy the bitmaps over to the backup bitmap.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reuse qemuBlockGetBitmapMergeActions which allows removal of the ad-hoc
implementation of bitmap merging for backup. The new approach is simpler
and also more robust in case some of the bitmaps break as they remove
the dependency on the whole chain of bitmaps working.
The new approach also allows backups if a snapshot is created outside of
libvirt.
Additionally the code is greatly simplified.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Exercise the now arguably simpler checkpoint deletion code on the
'basic', 'snapshots', and 'synthetic' test data sets.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we've switched to the simple handling, the first thing that can
be massively simplified is checkpoint deletion. We now need to only go
through the backing chain and find the appropriately named bitmaps and
delete them, no complex lookups or merging.
Note that compared to other functions this deletes the bitmap in all
layers compared to others where we expect only exactly 1 bitmap of a
name in the backing chain to prevent potential problems.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Based on the 'snapshots' example with manual tweaks to introduce
inactive, transient, inconsistent and duplicate bitmaps in various parts
of the chain to exercise detection and new validation code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that we've updated both the test data and the validator to new
semantics we can start testing again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use test data which conforms to the new semantics which changed in the
previous patch.
The test data was created by the same set of commands as originally in
commit 0b27b655b1
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use test data which conforms to the new semantics which changed in the
previous patch.
The test data was created by the same set of commands as originally in
commit 9aac9d5bda
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There will be multiple places where we'll need to print nodenames from a
GSList of virStorageSource for testing purposes. Extract the code into a
function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
They will be replaced by a different set which will test scenarios
relevant for the new semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Upcoming patches are going to rewrite and semantically modify how
bitmaps are handled during blockjobs. This is possible as incremental
backup is not yet fully enabled.
As the changes are going to be incompatible with any current test data
remove all test cases for bitmap handling during checkpoint deletion,
incremental backups, block commit, block copy, and bitmap validation
operations.
The tests will be gradually added back later after the code and
test-data is refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the new test data for checkpoint deletion testing. This test also
requires modification of the internals to allow checking for test
failure.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use the new test data when calculating incremental backup operations. As
incremental backup fails with no bitmap the test code is modified to
allow testing this case too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a disk is not captured by one of the intermediate checkpoints the
code would fail, but we can easily calculate the bitmaps to merge
correctly by skipping over checkpoints which don't describe the disk.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The CPUID data in *-{disabled,enabled}.xml convert feature names from
the corresponding *.json file into raw CPUID and MSR data and thus some
of them may need to be updated when new features are added into the CPU
map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test that we run 'mdevctl' with the proper arguments when we destroy
mediated devices with virNodeDeviceDestroy()
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Test that we run 'mdevctl' with the proper arguments when creating new
mediated devices with virNodeDeviceCreateXML().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit test to verify the NUMA vcpus autocomplete implemented
in the previous patch.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The same functionality can be achieved using query-migrate-parameters
QMP command and checking the xbzrle-cache-size parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829544
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with downtime-limit parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829543
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The same functionality can be achieved using migrate-set-parameters QMP
command with max-bandwidth parameter.
https://bugzilla.redhat.com/show_bug.cgi?id=1829545
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These parameters were originally set via dedicated commands which are
now deprecated. We want to use migrate-set-parameters instead if
possible.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since 5084091a, @tmp is filled by a g_key_file_get_string which is
now an allocated string as opposed to some hash table lookup value,
so we need to treat it as so.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce two utility functions to parse a kernel command
line string according to the kernel code parsing rules in
order to enable the caller to perform operations such as
verifying whether certain argument=value combinations are
present or retrieving an argument's value.
Signed-off-by: Paulo de Rezende Pinatti <ppinatti@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we have support for IPv6 in the iptables helpers, and a new
option in the XML schema, we can wire up support for it in the network
driver.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.
This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute
<forward mode="nat">
<nat ipv6="yes"/>
</forward>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Compilers are not very good at detecting this problem. Fixed by manual
inspection of compilation warnings after replacing 'VIR_FREE' with an
empty macro.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
Use g_free directly to free the returned pointer from
virTestLogContentAndReset rather than store it in a temp variable which
was necessary when we only allowed VIR_FREE.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
The path is formatted but then just freed without any use since
introduction of the test function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com
This is pretty straightforward and self explanatory.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1837990
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks whether QEMU supports -fw_cfg command line
option, more specifically whether it allows specifying filename.
There are some releases of QEMU which support -fw_cfg but not
filename. If this is ever a problem we can refine the capability
later on.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Setting OEM strings for a domain was introduced in
v4.1.0-rc1~315. However, any application that wanted to use them
(e.g. to point to an URL where a config file is stored) had to
'dmidecode -u --oem-string N' (where N is index of the string).
Well, we can expose them under our <sysinfo/> XML and if the
domain is running Libvirt inside it can be obtained using
virConnectGetSysinfo() API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since nobody sets custom dmidecode path anymore, we can drop all
code that exists only because of that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Problem with custom dmidecode scripts is that they are hard to
modify, especially if we will want them to act differently based
on passed arguments. So far, we have two scripts which do no more
than 'cat $sysinfo' where $sysinfo is saved dmidecode output.
The virCommandSetDryRun() can be used to trick
virSysinfoReadDMI() thinking it executed real dmidecode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There is no real need to have two separate functions. They can be
merged together which not only saves couple of lines, but
prepares the structure of the code for future expansion. See next
commits.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some variables defined in the function can be freed
automatically when going out of scope. This renders @result
variable and cleanup label needless.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Before QEMU introduced migratable CPU property, "-cpu host" included all
features that could be enabled on the host, even those which would block
migration. In other words, the default was equivalent to migratable=off.
When the migratable property was introduced, the default changed to
migratable=on. Let's record the default in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Instead of storing release notes as XML and then converting them
to HTML and ASCII at build time using XSLT and a custom script,
we can use reStructuredText as both the source and ASCII
representation and generate HTML from it using the same tooling
we already use for the rest of the documentation.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU added the machine types for the 5.1 release so let's update them.
Other notable changes are 'cpu-throttle-tailslow' migration property,
'zlib' compression for qcow2 images and absrtact socket support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support downscript for booting vm,
and hotunplug interface device.
Signed-off-by: Chen Hanxiao <chen_han_xiao@126.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The stepping range (10-11) is likely incomplete. QEMU uses 10 and the
CPUID data for Cooperlake show 11. We will update the range if needed
once more details about he CPU are available.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The host CPU related info stored in the capabilities cache is no longer
valid after the host CPU changes. This is not a frequent situation in
real world, but it can easily happen in nested scenarios when a disk
image is started with various CPUs.
https://bugzilla.redhat.com/show_bug.cgi?id=1778819
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
