To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the vol-*load two bandwidth functions that use this helper
introduce vshCommandOptULongLongWrap.
To follow the new semantics of the vshCommandOptToU* functions convert
this one to reject negative numbers too. To allow using -1 for "maximum"
semantics for the two bandwidth functions that use this helper introduce
vshCommandOptULWrap. Although currently the migrate-setspeed function
for the qemu driver will reject -1 as maximum.
Use virStrToLong_uip instead of virStrToLong_ui to reject negative
numbers in the helper. None of the callers expects the wraparound
"feature" for negative numbers.
Also add a function that allows wrapping of negative numbers as it might
be used in the future and be explicit about the new semantics in the
function docs.
For now 'virsh quit' action like this:
--------------------------------
[root@localhost /]# virsh quit
[root@localhost /]#
--------------------------------
And 'virsh exit' action:
--------------------------------
[root@localhost /]# virsh exit
[root@localhost /]#
--------------------------------
There is a small difference('/n') between them.
According to manual said:
quit, exit
quit this interactive terminal
And in the code they all called cmdQuit func,
They should get same actions.
Signed-off-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Introducing keepalive similarly to Guannan around 2 years ago. Since
we want to introduce keepalive for every connection, it makes sense to
wrap the connecting function into new virsh one that can deal
keepalive as well.
Function vshConnect() is now used for connecting and keepalive added
in that function (if possible) helps preventing long waits e.g. while
nework goes down during migration.
This patch also adds the options for keepalive tuning into virsh and
fails connecting only when keepalives are explicitly requested and
cannot be set (whether it is due to missing support in connected
driver or remote server). If not explicitely requested, a debug
message is printed (hence the addition to virsh-optparse test).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1073506
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=822839
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
I plan to add 'virsh event' to virsh-domain.c and 'virsh
net-event' to virsh-network.c; but as they will share quite
a bit of common boilerplate, it's better to set that up now
in virsh.c.
* tools/virsh.h (_vshControl): Add fields.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup): New
prototypes.
* tools/virsh.c (vshEventFd, vshEventOldAction, vshEventInt)
(vshEventTimeout): New helper variables and functions.
(vshEventStart, vshEventWait, vshEventDone, vshEventCleanup):
Implement new functions.
(vshInit, vshDeinit, main): Manage event timeout.
Signed-off-by: Eric Blake <eblake@redhat.com>
Several virsh commands ask for a --timeout parameter in
seconds, then use it to control interfaces that operate on
millisecond limits; I also plan on adding a 'virsh event'
command that also does this. Factor this into a common
function.
* tools/virsh.h (vshCommandOptTimeoutToMs): New prototype.
* tools/virsh.c (vshCommandOptTimeoutToMs): New function.
* tools/virsh-domain.c (cmdBlockCommit, cmdBlockCopy)
(cmdBlockPull, cmdMigrate): Use it.
(vshWatchJob): Adjust timeout scale.
Signed-off-by: Eric Blake <eblake@redhat.com>
Adding output to 'virsh --version=long' makes it easier to
tell if a distro built with particular libraries (it doesn't
tell you what a remote libvirtd is built with, but is still
better than nothing). But we forgot to mention gluster.
* tools/virsh.c (vshShowVersion): Add gluster witness.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch shuts up the following warning of clang
on Mac OS X:
virsh.c:2761:22: error: assigning to 'char *' from 'const char [6]' discards qualifiers
[-Werror,-Wincompatible-pointer-types-discards-qualifiers]
rl_readline_name = "virsh";
^ ~~~~~~~
The warning happens because rl_readline_name on Mac OS X comes
from an old readline header that still uses 'char *', while it
is 'const char *' in readline 4.2 (April 2001) and newer.
Tested on Mac OS X 10.8.5 (clang-500.2.75) and Fedora 19 (gcc 4.8.1).
Signed-off-by: Ryota Ozaki <ozaki.ryota@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Allow adjust the number of commands to remember in the command
history.
* tools/virsh.c (vshReadlineInit): Read and sanity the
VIRSH_HISTSIZE variable.
(VIRSH_HISTSIZE_MAX): New constant.
* tools/virsh.pod: Document VIRSH_HISTSIZE variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
We want to treat 'attach-disk --shareable' as an undocumented
alias for 'attach-disk --mode=shareable'. By improving our
alias handling, we can allow all such --bool -> --opt=value
replacements, and guarantee up front that the alias is not
mixed with its replacement.
* tools/virsh.c (vshCmddefOptParse, vshCmddefGetOption): Add
support for expanding bool alias to --opt=value.
(opts_echo): Add another alias to test it.
* tests/virshtest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
In commit b46c4787dd I changed the code to
watch long running jobs in virsh. Unfortunately I didn't take into
account that poll may get a hangup if the terminal is not a TTY and will
be closed.
This patch avoids polling the STDIN fd when there's no TTY.
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make it much easier to test a configuration built without readline
support, by reusing our existing library probe machinery. It gets
a bit tricky with readline, which does not provide a pkg-config
snippet, and which on some platforms requires one of several
terminal libraries as a prerequiste, but the end result should be
the same default behavior but now with the option to disable things.
* m4/virt-readline.m4 (LIBVIRT_CHECK_READLINE): Simplify by using
LIBVIRT_CHECK_LIB.
* tools/virsh.c: Convert USE_READLINE to WITH_READLINE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent patches to fix handling of Ctrl-C when interacting with
ssh are not portable to mingw, which lacks termios handling.
The simplest solution is to just compile that code out, and
if someone ever appears that has a serious interest in getting
virsh fully functional even with ssh connections, they can
provide patches at that time.
* tools/virsh.h (_vshControl): Make termattr conditional.
* tools/virsh.c (vshTTYIsInterruptCharacter)
(vshTTYDisableInterrupt, vshTTYRestore, cfmakeraw, vshTTYMakeRaw)
(main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch adds instrumentation to allow modification of config of the
terminal in virsh and successful reset of the state afterwards.
The added helpers allow to disable receiving of SIGINT when pressing the
key sequence (Ctrl+C usualy). This normally sends SIGINT to the
foreground process group which kills ssh processes used for transport of
the data.
Noticed while reviewing another patch that had an accidental
mismatch due to refactoring. An audit of the code showed that
very few callers of vshCommandOpt were expecting a return of
-2, indicating programmer error, and of those that DID check,
they just propagated that status to yet another caller that
did not check. Fix this by making the code blatantly warn
the programmer, rather than silently ignoring it and possibly
doing the wrong thing downstream.
I know that we frown on assert()/abort() inside libvirtd
(libraries should NEVER kill the program that linked them),
but as virsh is an app rather than the library, and as this
is not the first use of assert() in virsh, I think this
approach is okay.
* tools/virsh.h (vshCommandOpt): Drop declaration.
* tools/virsh.c (vshCommandOpt): Make static, and add a
parameter. Abort on programmer errors rather than making callers
repeat that logic.
(vshCommandOptInt, vshCommandOptUInt, vshCommandOptUL)
(vshCommandOptString, vshCommandOptStringReq)
(vshCommandOptLongLong, vshCommandOptULongLong)
(vshCommandOptBool): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit a0b6a36f "fixed" what abfff210 broke (URI precedence), but
there was still one more thing missing to fix. When using virsh
parameters to setup debugging, those weren't honored, because at the
time debugging was initializing, arguments weren't parsed yet. To
make ewerything work as expected, we need to initialize the debugging
twice, once before debugging (so we can debug option parsing properly)
and then again after these options are parsed.
As a side effect, this patch also fixes a leak when virsh is ran with
multiple '-l' parameters.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The messages were only freed on error.
==12== 1,100 bytes in 1 blocks are definitely lost in loss record 698 of 729
==12== by 0x4E98C22: virBufferAsprintf (virbuffer.c:294)
==12== by 0x12C950: vshOutputLogFile (virsh.c:2440)
==12== by 0x12880B: vshError (virsh.c:2254)
==12== by 0x131957: vshCommandOptDomainBy (virsh-domain.c:109)
==12== by 0x14253E: cmdStart (virsh-domain.c:3333)
https://bugzilla.redhat.com/show_bug.cgi?id=1001536
Commit abfff210 changed the order of vshParseArgv() and vshInit() in
order to make fix debugging of parameter parsing. However, vshInit()
did a vshReconnect() even though ctl->name wasn't set according to the
'-c' parameter yet. In order to keep both issues fixed, I've split
the vshInit() into vshInitDebug() and vshInit().
One simple memleak of ctl->name is fixed as a part of this patch,
since it is related to the issue it's fixing.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=999323
At a slightly larger memory expense allow stealing of items from the
string array returned from vshStringToArray and turn the result into a
string list compatible with virStringSplit. This will allow to use the
common dealloc function.
This patch also fixes a few forgotten checks of return from
vshStringToArray and one memory leak.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Don't print 'OPTION' if there's no options. Just behaves as DESCRIPTION
does.
This mostly affects 'interface' command group.
Signed-off-by: Zhang Xiaohe <zhangxh@cn.fujitsu.com>
Reported-by: Li Yang <liyang.fnst@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Recent commit '53531e16' resulted in a new Coverity warning regarding
a missing break in the ':' options processing. Adjust the commit to
avoid the issue.
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
For long options, print:
* the option as specified by the user if it's unknown
* the canonical long option if its argument is not
a number (and should be)
And for missing arguments, print both the short and
the long option name.
(Doing only one of those would require either parsing
argv ourselves or let getopt print the errors, since
we can't tell long and short options apart by optopt
or longindex)
https://bugzilla.redhat.com/show_bug.cgi?id=949373
Unsupported long option:
$ virsh --pm
Before:
error: unsupported option '-
After:
error: unsupported option '--pm'. See --help.
Missing parameter:
$ virsh --deb
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
$ virsh -rd
Before:
error: option '-d' requires an argument
After:
error: option '-d'/'--debug' requires an argument
Non-numeric parameter:
$ virsh --deb duck
Before:
error: option -d takes a numeric argument
After:
error: option --debug takes a numeric argument
'virsh help | grep nodedev-det' shows only nodedev-detach, but
'virsh help nodedev | grep nodedev-det' also shows the old alias
nodedev-dettach that we intentionally hid in commit af3f9aab.
See also commit 787f4fe and this bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=956966
* tools/virsh.c (vshCmdGrpHelp): Copy suppression of vshCmdHelp.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
This patch improves the error message after disconnecting from the
hypervisor and adds the close callback operations required not to leak
the callback reference.
The function is used to establish connection so it should be in the main
virsh file. This movement also enables further improvements done in next
patches.
Note that the "connect" command has moved from the host section of virsh to the
main section. It is now listed by 'virsh help virsh' instead of 'virsh help
host'.
Before closing the connection we unregister the close callback
to prevent a reference leak.
Further, the messages on virConnectClose != 0 are a bit more specific
now.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
After we switched to C99 initialization, I noticed there were many
places where the specification of .flags parameter differed. After
going through many options and deciding whether to unify the
initialization to be '.flags = 0' or '.flags = VSH_OFLAG_NONE', I
realized both can be removed and it makes the code easier to go
through.
