Commit Graph

2979 Commits

Author SHA1 Message Date
Chris Lalancette
3c7a12b416 Split virDomainMigrate into functions.
Re-factor virDomainMigrate to split out the version 1 and version 2
protocols into their own functions.  In reality, the two versions share
very little in common, so forcing them together in the same function was
just confusing.  This will also make adding tunnelled migration easier.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-11 13:27:54 +02:00
Chris Lalancette
cbcf5ba7d4 Fix QEMU domain status after restore.
When doing a restore, we were forgetting to update the state file
for the VM.  That means that if you do a save/restore, then shut
down libvirtd, then start it back up, you'll see the state of the
guest as "paused", even though it is really running.  We were
just forgetting a "virDomainSaveStatus" call in the restor path.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-11 13:27:07 +02:00
Mark McLoughlin
f5a8f969dd Handle kernels with no ipv6 support
If the ipv6 kernel module is not loaded, then we get this when starting
a virtual network:

  libvir: Network Config error :
  cannot enable /proc/sys/net/ipv6/conf/virbr0/disable_ipv6:
  No such file or directory

If disable_ipv6 is not present, we should just merrily continue on our
way.

* src/network_driver.c: make networkDisableIPV6() not fail if the kernel
  has no ipv6 support
2009-08-10 11:19:42 +01:00
Mark McLoughlin
f9bfa10797 Set perms on /var/lib/libvirt/boot to 0711
Allow qemu user to open kernel/initrds in this dir, but still prevent
others from listing it.

* libvirt.spec.in: set /var/lib/libvirt/boot perms to 0711
2009-08-10 09:00:02 +01:00
Mark McLoughlin
c42b397845 chown kernel/initrd before spawning qemu
If we're running qemu unprivileged, we need to chown any supplied kernel
or initrd before spawning it.

* src/qemu_driver.c: rename qemuDomainSetDiskOwnership() to
  qemuDomainSetFileOwnership(), pass it a path string instead of a disk
  definition and use it for chowning the kernel/initrd in
  qemuDomainSetAllDeviceOwnership()
2009-08-10 09:00:01 +01:00
Daniel P. Berrange
f2144a3063 Add link to AbiCloud web management system 2009-08-07 14:12:22 +01:00
Chris Lalancette
47919e46ab Remove unsafe strncpy from esx_vmx.c
While trying to remove uses of unsafe strncpy in the tree, I came
across a couple of usages in the ESX driver.  To my eyes, the snprintf
replacements do the same thing in less code, and are also safer.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Tested-by: Mattias Bolte <matthias.bolte@googlemail.com>
2009-08-07 13:50:32 +02:00
Amy Griffis
7534be6fbc Update logging documentation
* docs/logging.html[.in] try to include a little more description about
  the corner cases, things someone might get hung up on on.
2009-08-06 15:58:38 +02:00
Amy Griffis
63fbcc6927 Consolidate code for parsing the logging env
* src/logging.c src/logging.h src/libvirt_private.syms:
  define new functions virLogSetFromEnv and virLogParseDefaultPriority
* qemud/qemud.c src/libvirt.c tests/eventtest.c: cleanup to use the
  unified functions
2009-08-06 15:55:07 +02:00
Amy Griffis
e542d52a7c Cleanup VIR_LOG_DEBUG parsing in eventtest
* tests/eventtest.c: don't covert high priority levels to debug level.
  Consider an invalid priority level setting a setup failure.
2009-08-06 15:50:40 +02:00
Amy Griffis
9147bf2a73 Several fixes to libvirtd's log setup
* qemud/qemud.c src/logging.[ch]: Similar as for general libvirt, don't
  convert high priority levels to debug level. Ignore LIBVIRT_LOG_FILTERS
  and LIBVIRT_LOG_OUTPUTS when they're set to the empty string, otherwise
  they can override a valid setting from the config file. Send all
  settings through the parser functions for validation, so that the
  existence of a bad setting doesn't nullify a good setting that should
  have applied -- particularly the default output. Keep the order of
  precedence consistent for all variables between the environment and
  the config file.  Warn when an invalid log level, filter, or output
  is ignored.
* src/libvirt_private.syms: export internally a few convenience functions
2009-08-06 15:45:50 +02:00
Amy Griffis
22a1ec68d5 Tighten libvirt's parsing of logging env
* src/libvirt.c src/logging.c: Don't convert high priority levels to the
  debug level. Don't parse LIBVIRT_LOG_FILTERS and LIBVIRT_LOG_OUTPUTS
  when they're set to the empty string. Warn when the user specifies an
  invalid value (empty string remains a noop).
* po/POTFILES.in: src/logging.c now include translatable strings
2009-08-06 15:38:11 +02:00
Matthias Bolte
a9e96b1ee0 Cleanup structure name naming
* src/esx/esx_driver.c src/esx/esx_util.[ch] src/esx/esx_vi.[ch]:
  just a name change
2009-08-06 15:15:45 +02:00
Matthias Bolte
5f48643e0a Fix memleak if esxOpen fails
* src/esx/esx_driver.c: if esxOpen failed, priv->transport wasn't freed
2009-08-06 15:09:40 +02:00
Matthias Bolte
a7c76142a0 Add proper OOM reporting for esxDomainGetOSType
* src/esx/esx_driver.c: catch an unchecked strdup in
  esxDomainGetOSType()
2009-08-06 15:07:46 +02:00
Daniel Veillard
22a5ebe44b Release of libvirt-0.7.0
* configure.in NEWS docs/* libvirt.spec.in include/libvirt/libvirt.h:
  Release of 0.7.0
* po/*.po*: updated and regenerated the localization pool
2009-08-05 16:00:41 +02:00
Ryota Ozaki
8b54ef4147 Add an allocation unit when calling qemu-img
* src/storage_backend.c: as the absence of units can be interpreted
  in diverging ways depending on the version
2009-08-05 14:35:17 +02:00
Daniel P. Berrange
a480572244 Add uniqness checking for LXC define/create methods
* src/lxc_driver.c: Check for name & UUID uniqueness when
  defining or creating domains
2009-08-05 12:01:04 +01:00
Daniel P. Berrange
388f3368cb Fix removal of transient VMs when LXC aborts
* src/lxc_driver.c: Remove transient VM after monitor triggered
  shutdown
2009-08-05 12:01:04 +01:00
Daniel P. Berrange
53d9a92497 Don't try to activate cgroups if not present for LXC
* src/lxc_controller.c: Don't throw error in LXC startup if
  the cgroups driver mount isn't available. Improve error
  logging for resource setup
2009-08-05 12:01:04 +01:00
Daniel P. Berrange
87f3d69dac Fix configure checks from previous commits
* configure.in: Don't set AM_CONDITIIONAL until *after* making
  the checks
2009-08-05 11:59:58 +01:00
Daniel P. Berrange
acec6c3d02 Avoid a warning if compiling without inotify
* src/xm_internal.c: split the implementations of xenInotifyActive()
2009-08-05 12:04:26 +02:00
Aron Griffis
3879b33447 Typo and comment fixes
* docs/schemas/*.rng: the comments were wrong
* src/qemu_conf.c: typo in an error message
2009-08-05 11:56:56 +02:00
Cole Robinson
a11010c07d Refresh /etc/xen if inotify wasn't
* src/xm_internal.c: in case of multiple connections to the xen driver
  and some clients were not using domain events, the whole /etc/xen
  monitoring would break leading to disapearing domains.
2009-08-05 11:46:33 +02:00
Cole Robinson
8ddfb40e2d Don't loose id on xen domain redefine
* src/xm_internal.c: bug when redefining a domain, if it was running
  we would loose its id
2009-08-05 11:39:31 +02:00
Daniel Veillard
3e64748c72 Remove a stray semicolon
* src/xend_internal.c: extraneous ; in xenDaemonParseSxprGraphicsNew
2009-08-05 11:24:23 +02:00
Maximilian Wilhelm
3f11d7820a Workaround for broken GCC in Debian Etch
* src/storage_conf.c src/internal.h: move previous check in internal.h
  and add a workaround for a GCC bug in Debian Etch on limit definitions
2009-08-05 11:19:34 +02:00
Maximilian Wilhelm
64bf389bca Xen Inotify support needs sys/inotify.h
* configure.in: to activate Xen Inotify checking we need to check for
  sys/inotify.h availability
2009-08-05 10:57:40 +02:00
Maximilian Wilhelm
a3a623dd57 LXC driver requires sched.h and unshare()
* configure.in: make it check by default for both
2009-08-05 10:52:14 +02:00
Maximilian Wilhelm
16928a161b Configure UML support only if sys/inotify.h present
* configure.in: UML support requires sys/inotify.h so make it check
  by default.
2009-08-05 10:47:18 +02:00
Maximilian Wilhelm
939cc47431 Fix libcurl automatic check and ESX status
* configure.in: if libcurl is not present ESX should be desactivated
  so default to check for esx
2009-08-05 10:43:37 +02:00
Matthias Bolte
10a4e969a6 Extend the ESX URL to habdle ports and GSX
* src/esx/esx_driver.c src/esx/esx_vi.[ch] src/esx/esx_vmx.[ch]:
  adds version checking for GSX 2.0, allows to pass a specific port
  for the connection and also add a new specific gsx scheme for
  easier connections to GSX hosts
2009-08-05 10:23:59 +02:00
Daniel P. Berrange
8feb499ba2 Fix escaping of 8-bit high characters
Fix  https://bugzilla.redhat.com/show_bug.cgi?id=479517

* src/buf.c: Cast to 'unsigned char' before doing compare to
  avoid rejecting 8-bit high characters
2009-08-04 18:13:09 +01:00
Daniel P. Berrange
bf69fd9b22 Fix memory leak in openvz driver
* src/openvz_driver.c: Remove unneccessary strdup() on hypervisor
  type api call
2009-08-03 11:42:39 +01:00
Chris Lalancette
7a4769bbdb Remove ATTRIBUTE_UNUSED from flags to qemudDomainMigratePerform.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:08:11 +02:00
Chris Lalancette
1fdb582a09 Add a comment about setting errors after qemudStartVMDaemon().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:08:00 +02:00
Chris Lalancette
067c00f533 Fix an erroneous debug error to KVM; it should read QEMU/KVM.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:07:45 +02:00
Chris Lalancette
1a94521770 Remove a stray semicolon in qemudDomainMigratePrepare2.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:07:33 +02:00
Chris Lalancette
08cb0b3cfc Convert a few stray users of free() in libvirt.c to VIR_FREE().
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:07:20 +02:00
Chris Lalancette
180ca598c4 Use virGetHostname instead of gethostname.
Fix up qemudDomainMigratePrepare2 to use virGetHostname instead of
gethostname.  Besides the fact that virGetHostname is far more clever,
there was a latent bug in the handling that could cause a buffer overflow
on a very long hostname.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:07:02 +02:00
Chris Lalancette
f24d4671d4 Fix up a minor indentation issue with virDomainMigratePrepare.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:06:35 +02:00
Chris Lalancette
e1ec2a1ea6 Fix virCapabilitiesDefaultGuestMachine documentation.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:06:20 +02:00
Chris Lalancette
5705a7e066 Fix up a silly typo in apibuild.py.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-08-02 12:05:33 +02:00
Daniel P. Berrange
e170af3ac0 Protected against potential crash scenarios
* src/qemu_driver.c: Check that monitor device is not NULL
  before runing a command to protect against bugs in caller
2009-07-31 17:06:44 +01:00
Daniel P. Berrange
88e3e8be7c Improve diagnostics when pidfile writing fails
* src/util.c: Include path & pid when logging pidfile failure
2009-07-31 17:06:44 +01:00
Daniel P. Berrange
5d3e02aaa2 Fix crash when attempting to shutdown inactive QEMU vm
* src/qemu_driver.c: Add check that QEMU is active before attemting
  to shutdown. Fix error code for check in destroy method
2009-07-31 17:06:44 +01:00
Daniel P. Berrange
84e96866ac Enable ESX driver build on Mingw32
* autobuild.sh, mingw32-libvirt.spec.in: Enable esx on mingw32
* src/esx/esx_driver.c: Define AI_ADDRCONFIG if not set
* src/esx/esx_util.c, src/esx/esx_vi_types.c: Always use
  %lld & friends, since gnulib guarentees we have these
  and not the target's own variants
2009-07-31 16:15:51 +01:00
Daniel P. Berrange
651153216b Disable IPv6 on virtual networks
If the bridge device is configured to have IPv6 address and
accept router advertisments, then a malicious guest can send
out bogus advertisments and hijack/DOS host IPv6 connectivity

* src/network_driver.c: Set accept_ra=0, disable_ipv6=1, autoconf=0
  for IPv6 sysctl on virual network bridge devices
2009-07-31 16:14:26 +01:00
Mark McLoughlin
a49cf8a57d Fix PCIe FLR detection
PCIe DevCap register is actually 32 bits, not 16 bits. Since FLR is
bit 28, we clearly are failing to detect FLR support.

Known to fix device reset with some SR-IOV devices.

* src/pci.c: fix pciDetectFunctionLevelReset()
2009-07-31 15:41:36 +01:00
Mark McLoughlin
f4e7157716 Set perms on /var/lib/libvirt/images to 0711
Allow qemu user to open images in this dir, but still prevent others
from listing it.

* libvirt.spec.in: set /var/lib/libvirt/images perms to 0711
2009-07-31 09:52:24 +01:00