Commit Graph

2157 Commits

Author SHA1 Message Date
Ján Tomko
f6acf039f0 Revert "conf: allow setting peer address in <ip> element of <interface>"
This reverts commit 93135abf14.

This feature was accidentally pushed in the feature freeze.
2016-06-27 12:54:55 +02:00
Ján Tomko
d658456530 Revert "conf: support host-side IP/route information in <interface>"
This reverts commit fe6a77898a.

This feature was accidentally pushed in the feature freeze.
2016-06-27 12:54:55 +02:00
Laine Stump
fe6a77898a conf: support host-side IP/route information in <interface>
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:

    <interface type='ethernet'>
      <mac address='00:16:3e:0f:ef:8a'/>
      <source>
        <ip address='192.168.122.12' family='ipv4'
            prefix='24' peer='192.168.122.1'/>
        <ip address='192.168.122.13' family='ipv4' prefix='24'/>
        <route family='ipv4' address='0.0.0.0'
               gateway='192.168.122.1'/>
        <route family='ipv4' address='192.168.124.0' prefix='24'
               gateway='192.168.124.1'/>
      </source>
    </interface>

In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).

(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
2016-06-26 19:33:10 -04:00
Vasiliy Tolstov
93135abf14 conf: allow setting peer address in <ip> element of <interface>
The peer attribute is used to set the property of the same name in the
interface IP info:

  <interface type='ethernet'>
    ...
    <ip family='ipv4' address='192.168.122.5'
        prefix='32' peer='192.168.122.6'/>
    ...
  </interface>

Note that this element is used to set the IP information on the
*guest* side interface, not the host side interface - that will be
supported in an upcoming patch.

(This is an updated *re*-commit of commit 690969af, which was
subsequently reverted in commit 1d14b13f).

Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
2016-06-26 19:33:10 -04:00
Laine Stump
fbc1843d2e conf: use virNetDevIPInfo for guest-side <interface> config
All the same information was already there, just in slightly different
places in the virDomainNetDef.
2016-06-26 19:33:09 -04:00
Laine Stump
69e04044dd conf: use virNetDevIPInfo in virDomainHostdevCaps
a.k.a. <hostdev mode='capabilities' type='net'>.

This replaces the existing nips, ips, nroutes, and routes with a
single virNetDevIPInfo, and simplifies the code by calling that
object's parse/format/clear functions instead of open coding.
2016-06-26 19:33:09 -04:00
Laine Stump
9911562a22 conf: single object containing list of IP addresses, list of routes
There are currently two places in the domain where this combination is
used, and there is about to be another. This patch puts them together
for brevity and uniformity.

As with the newly-renamed virNetDevIPAddr and virNetDevIPRoute
objects, the new virNetDevIPInfo object will need to be accessed by a
utility function that calls low level Netlink functions (so we don't
want it to be in the conf directory) and will be called from multiple
hypervisor drivers (so it can't be in any hypervisor directory); the
most appropriate place is thus once again the util directory.

The parse and format functions are in conf/domain_conf.c because only
the domain XML (i.e. *not* the network XML) has this exact combination
of IP addresses plus routes. Note that virDomainNetIPInfoFormat() will
end up being the only caller to virDomainNetRoutesFormat() and
virDomainNetIPsFormat(), so it will just subsume those functions in a
later patch, but we can't do that until they are no longer called.

(It would have been nice to include the interface name within the
virNetDevIPInfo object (with a slight name change), but that can't
be done cleanly, because in each case the interface name is provided
in a different place in the XML relative to the routes and IP
addresses, so putting it in this object would actually make the code
more confused rather than simpler).
2016-06-26 19:33:09 -04:00
Laine Stump
9658e70f7d conf/openvz: eliminate incorrect/undocumented use of <source dev='blah'/>
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).

When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.

In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.

This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.

NB: I decided on this course of action after mentioning the
inconsistency here:

  https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html

and getting encouragement do eliminate it in a later IRC discussion
with danpb.
2016-06-26 19:33:08 -04:00
Erik Skultety
52dbacc07a admin: enable both admin API functionality and tarball distribution
This patch enables admin socket creation in daemon's code, bumps the library
version in libvirt_admin_public.syms, and performs all necessary modifications
to our makefiles so that admin API can finally be included in the tarball,
and eventually become part of an rpm package (a patch later in this series).

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-06-26 00:21:06 +02:00
yuelongguang
969b27d84c add help document relevant to default mapping of credentials to machines
* src/util/virauthconfig.c
2016-06-24 16:36:54 +01:00
John Ferlan
13c34f811d docs: Fix whitespace in output
Many moons ago, commit id '8d7800a55' adjusted the format of the output
to add a space on the HEADER and the DATA... the docs weren't updated to
reflect that... This makes that adjustment.
2016-06-24 10:22:59 -04:00
Laine Stump
df2fb9bfff conf: limit chassisNr, and busNr to a minimum value of 1, not 0
In the case of chassisNr (used to set chassis_nr of a pci-bridge
controller), 0 is reserved for / used by the pci[e]-root bus. In the
base of busNr, a value of 0 would mean that the root bus had no places
available to plug in new buses, including the pxb itself (the
documentation I wrote for pxb even noted the limit of busNr as 1.254).

NB: oddly, the "chassis" attribute, which is used for pcie-root-port
and pcie-switch-downstream-port *can* be set to 0, since it's the
combination of {chassis, slot} that needs to be unique, not chassis by
itself (and slot 0 of pcie-root is reserved, while pcie-*-port can use
*only* slot 0).

This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1342962
2016-06-21 11:54:46 -04:00
Peter Krempa
c22dad33c2 docs: Add at least some docs and fix schema entry for perf events
There was no documentation at all for the XML part. I added at least
some. The 2.0.0 introduction date is deliberate as the parser for the
XML is broken.

The schema file was missing entries for 'mbml' and 'mbmt'.
2016-06-17 09:35:14 +02:00
Andrea Bolognani
2c51fa6ec4 maint: Switch to xz compressed PAX release archives
This allows us to produce releases that are roughly a third in
size, have no limitation on path length, and are still readable
by all supported platforms.
2016-06-15 18:53:34 +02:00
Ján Tomko
e347e732bb docs: document rng backend path restrictions of older libvirt
Commit 67f2b72 removed the path restrictions for rng backend,
along with the documentation of the restriction.

Restore the documentation for users still using older libvirt.

https://bugzilla.redhat.com/show_bug.cgi?id=1074464
2016-06-15 12:36:53 +02:00
Jingjing Shao
442cdb817e doc: Fix explanation of S3 and S4 states
Explanation of S3 and S4 states was swapped.
2016-06-15 08:58:14 +02:00
John Ferlan
323d5bdc94 docs: Clarify chardev protocol
Add a slight clarification to usage of "telnet", "telnets", or "tls" as
the protocol type value.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-06-14 08:41:45 -04:00
John Ferlan
9f044e6272 docs: Fix syntax-check
Commit id '42ff399a' broke syntax-check by not encasing <dt> elements
in <code>xxx</code>
2016-06-14 06:22:37 -04:00
Martin Kletzander
42ff399a5e Fix renumbering once again
I screwed up by accidentally pushing incomplete version of the
renumbering commit.  This patch just fixes the rest so the tree matches
changes in v2.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-14 12:06:13 +02:00
Martin Kletzander
e8dc0e3a43 Change 1.3.6 occurrences to 2.0.0 to follow version bump
Version was bumped but documentation (and comments) didn't follow the
numbering.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-14 11:15:18 +02:00
Daniel P. Berrange
8264c70e0b Bump release to 2.0.0 and document release schedule & versioning
This bumps the release number of 2.0.0, to reflect the switch to
a new time based release versioning scheme. The downloads page
is updated to describe our policies for release schedules and
release version numbering

The stable release docs are changed to reflect the fact that
the stable version numbers are now just 3 digits long instead
of 4.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-14 10:59:07 +02:00
Martin Kletzander
d3c784999d conf: Add support of zero-detection for disks
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively.  It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-06-14 08:25:25 +02:00
Pavel Hrdina
93a2fb230a vnc: add support for listen type none
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:46:45 +02:00
Pavel Hrdina
c34ada0996 spice: introduce listen type none
This new listen type is currently supported only by spice graphics.
It's introduced to make it easier and clearer specify to not listen
anywhere in order to start a guest with OpenGL support.

The old way to do this was set spice graphics autoport='no' and don't
specify any ports.  The new way is to use <listen type='none'/>.  In
order to be able to migrate to old libvirt the migratable XML will be
generated without the listen element and with autoport='no'.  Also the
old configuration will be automatically converted to the this listen
type.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:44:08 +02:00
Pavel Hrdina
e0c309b2dc spice: add support for listen type socket
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1335832

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:43:15 +02:00
Pavel Hrdina
acc83afe33 vnc: add support for listen type 'socket'
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.

For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs.  If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.

To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:42:48 +02:00
Pavel Hrdina
b6465e1aa4 graphics: introduce new listen type 'socket'
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-06-09 14:24:00 +02:00
Daniel P. Berrange
416358d99d remote: allow TLS protocol/cipher priority override in URI
Add support for a "tls_priority" URI parameter in remote
driver URIs. eg

 qemu+tls://localhost/session?tls_priority=NORMAL:-VERS-SSL3.0

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-08 13:48:45 +01:00
Michal Privoznik
cc874efb5b docs: Document our event loop
I was asked the other day what's event loop and how libvirt uses
it. Well, I haven't found any good sources on the Internet so I
thought of writing the documentation on my own.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-06-06 17:35:44 +02:00
Daniel Veillard
7324444bc7 Release of libvirt-1.3.5
* docs/news.html.in: update with 1.3.5 data
2016-06-04 23:29:59 +08:00
Michal Privoznik
3864d86385 apibuild: Substitute only pure number tokens
In 38df47c9af I've tried to prepare our apibuild.py script for
change made in 0628f3498c (1U << 31). What I've done in the
former commit was to replace \d+U in parsed tokens with \d.
Problem was, my regular expression there was not quite right as
it also translated VIR_123U_VAL into VIR_123_VAL.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-05-30 15:38:07 +02:00
Michal Privoznik
38df47c9af docs: Teach apibuild to deal with (1U << 31) too
The apibuild script is a terrifying beast that parses some source
files of ours and produces an XML representation of them. When it
comes to parsing enums we have in some header files, it tries to
be clever and detect a value that an enum member has (or if it is
an alias for a different member). Whilst doing that it has to
deal with values we give to the members in many formats. At some
places we just pass the value in decimal:

    VIR_DOMAIN_BLOCK_JOB_TYPE_PULL = 1,

in other places, we use the aliasing:

    VIR_CONNECT_GET_ALL_DOMAINS_STATS_ACTIVE = VIR_CONNECT_LIST_DOMAINS_ACTIVE,

and in other places bitwise shifts are used:

    VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS = 1 << 31, /* enforce requested stats */

The script tries to parse all of these resulting in the following
tokens: "1", "VIR_CONNECT_LIST_DOMAINS_ACTIVE", "1<<31"; Then, the
script tries to turn these into integers using python's eval()
function. This function succeeds on the first and the last
tokens. But, if we were to modify the last example so that it's
of the following form:

    VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS = 1U << 31, /* enforce requested stats */

the token representing enum's member value will then be "1U<<31".
So our parsing is good. Unfortunately, python is not aware of the
difference between signed and unsigned C types, therefore eval()
fails over this token and the parser falls back thinking it's an
alias to another enum member. Well it's not.

The solution is to transform [0-9]U into [0-9] as for our
purposes here it's the same thing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-05-28 13:21:43 +02:00
Laine Stump
4d100c7a41 conf: permit auto-assignment of controller indexes
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.

The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.

With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:

  <controller type='pci' model='pcie-root-port'/>
  <controller type='pci' model='pcie-switch-upstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  <controller type='pci' model='pcie-switch-downstream-port'/>
  ...

These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
2016-05-25 15:00:25 -04:00
Ján Tomko
72f652da63 conf: add <acpi><table> to <os>
Add a new element to <domain> XML:
<os>
  <acpi>
    <table type="slic">/path/to/acpi/table/file</table>
  </acpi>
</os>

To supply a path to a SLIC (Software Licensing) ACPI
table blob.

https://bugzilla.redhat.com/show_bug.cgi?id=1327537
2016-05-25 17:15:21 +02:00
Laine Stump
8f578716c7 conf: allow type='pci' addresses with no address attributes specified
Prior to this, <address type='pci'/> wasn't allowed when parsing
(domain+bus+slot+function needed to be a "valid" PCI address, meaning
that at least one of domain/bus/slot had to be non-0), the RNG
required bus to be specified, and if type was set to PCI when
formatting, domain+bus+slot+function would always be output.

This makes all the address attributes optional during parse and RNG
validation, and suppresses domain+bus+slot+function if domain+bus+slot
are all 0 (NB: if d+b+s are all 0, any value for function is
nonsensical as that will never happen in the real world, and after
the next patch we will always assign a real working address to any
empty PCI address before it is ever output to anywhere).

Note that explicitly setting all attributes to 0 is equivalent to
setting none of them, which is okay, since 0000:00:00 is reserved in
any PCI bus setup, and can't be used anyway.
2016-05-20 13:54:25 -04:00
Ján Tomko
d25a3051fe docs: fix <spice><gl enable> since version
The support was added by commit 937ebba which was released in
1.3.3.
2016-05-20 09:14:02 +02:00
Cole Robinson
84120af628 docs: formatdomain: document virtio-mmio device addresses 2016-05-17 07:36:31 -04:00
Pavel Hrdina
b33c14b342 graphics: make address attribute for listen type='address' optional
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element.  This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-05-17 10:41:45 +02:00
Michal Privoznik
6326865e6b virtestmock: Print invalid file accesses into a file
All the accesses to files outside our build or source directories
are now identified and appended into a file for later processing.
The location of the file that contains all the records can be
controlled via VIR_TEST_FILE_ACCESS env variable and defaults to
abs_builddir "/test_file_access.txt".

The script that will process the access file is to be added in
next commit.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-05-14 09:46:23 +02:00
Christophe Fergeau
28675d633b schemas: Improve outdated comment 2016-05-12 14:53:24 +02:00
John Ferlan
e7bde8d319 storage: Fix algorithm generating path names for devmapper
https://bugzilla.redhat.com/show_bug.cgi?id=1265694

Commit id '020135dc' didn't quite get the algorithm correct when a
device mapper source ended with a non numeric value (e.g. ends with
an alphabet value).

This patch modifies the 'part_separator' logic to add the "p" separator
to the attempted target path name only when specified as part_separator='yes'.

For a source name that already ends with a number, the logic doesn't change
as the part separator would need to be there.

For a source name that ends with something other than a number, this allows
the possibility that a "p" separator can be added. The default for one of
these source devices is to not add the separator.

The key for device mapper and the need for a partition separator "p" is
the presence of a number in the last character of the device name link
in /dev/mapper.  A name such as "/dev/mapper/mpatha1" would generate
a "/dev/mapper/mpatha1p1" partition, while "/dev/mapper/mpatha" would
generate partition "/dev/mapper/mpatha1". Similarly for a device
mapper entry not using friendly names or an alias, a device such as
"/dev/mapper/3600a0b80005b10ca00005ad656fd8d93" would generate a
paritition "/dev/mapper/3600a0b80005b10ca00005ad656fd8d93p1", while
a device such as "/dev/mapper/3600a0b80005b10ca00005e115729093f" would
generate a partition "/dev/mapper/3600a0b80005b10ca00005e115729093f1".
The long number is the WWID of the device. It's also possible to assign
an alias for a device mapper entry, that alias follows the same rules
with respect to ending with a number or not when adding a "p" to create
the target device path.
2016-05-11 09:23:31 -04:00
John Ferlan
70ac246159 docs: Fix disk "volume" description
Missing a close single quote and a 'be' before used.
2016-05-10 15:53:02 -04:00
Laine Stump
f21017ab7e docs: fix version number in vlan tagging documentation
My brain suffered a time warp and I got the version number wrong.
2016-05-10 15:23:55 -04:00
Laine Stump
75db9997a0 util: set vlan tag for macvtap passthrough mode on SRIOV VFs
SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.

This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.
2016-05-10 14:04:19 -04:00
Cole Robinson
5ed235c68f domaincaps: Report video modelType
Requires adding the plumbing for <device><video>
The value is <enum name='modelType'> to match the associated domain
XML of <video><model type='XXX'/>

Wire it up for qemu too
2016-05-09 16:05:31 -04:00
Cole Robinson
6da27ad1b5 domaincaps: Report graphics type enum
Requires adding the plumbing for <device><graphics>
Wire it up for qemu too
2016-05-09 16:05:31 -04:00
John Ferlan
e0d0e53086 conf: Add support for virtio-scsi iothreads
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.

Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
2016-05-04 09:59:14 -04:00
John Ferlan
d32a2f25bf docs: Reformat the Controllers description
Reformat to use <dt> elements to make it a bit easier to read.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-05-03 14:08:05 -04:00
John Ferlan
6ddd9df9fb docs: clarify disk iothread support
Rather than be specific about which devices in the <iothreads> description,
let's leave that for the <disk> description for it's <iothread> value.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-05-03 14:08:05 -04:00
Cole Robinson
600977e293 qemu: support configuring usb3 controller port count
This adds a ports= attribute to usb controller XML, like

  <controller type='usb' model='nec-xhci' ports='8'/>

This maps to:

  qemu -device nec-usb-xhci,p2=8,p3=8

Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.

https://bugzilla.redhat.com/show_bug.cgi?id=1271408
2016-05-03 08:58:30 -04:00
Boris Fiuczynski
d855465452 qemu: add panic device support for S390
If a panic device is being defined without a model in a domain
the default value is always overwritten with model ISA. An ISA
bus does not exist on S390 and therefore specifying a panic device
results in an unsupported configuration.
Since the S390 architecture inherently provides a crash detection
capability the panic device should be defined in the domain xml.

This patch adds an s390 panic device model and prevents setting a
device address on it.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-05-02 17:01:40 +02:00
Boris Fiuczynski
f91403e00b docs: align spelling of S390
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2016-05-02 17:01:40 +02:00
Martin Kletzander
9840761fb4 schemas: Update nodedev schema to match reality
There were few things done in the nodedev code but we were lacking tests
for it.  And because of that we missed that the schema was not updated
either.  Fix the schema and add various test files to show the schema
is correct.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-05-02 15:46:23 +02:00
Martin Kletzander
88c8be67d4 Move capability formatting together
All sub-PCI capabilities should be next to each other for clarity.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-05-02 15:46:23 +02:00
Daniel Veillard
52f1874602 Release of libvirt-1.3.4
* docs/news.html.in libvirt.spec.in: update for release
* po/*.po* : regenerated
2016-05-01 09:50:21 +08:00
Laine Stump
1d14b13f3b Revert "libvirt domain xml allow to set peer address"
This reverts commit 690969af9c, which
added the domain config parts to support a "peer" attribute in domain
interface <ip> elements.

It's being removed temporarily for the release of libvirt 1.3.4
because the feature doesn't work, and there are concerns that it may
need to be modified in an externally visible manner which could create
backward compatibility problems.
2016-04-29 12:46:16 -04:00
Cole Robinson
67f2b72723 conf: Drop restrictions on rng backend path
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45

However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:

http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html

Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely

https://bugzilla.redhat.com/show_bug.cgi?id=1074464
2016-04-26 11:43:33 -04:00
Cole Robinson
600a666ce5 schema: Allow space character in disk vendor/product
The hex range already tried to allow for it, but it wasn't using
the correct XML hex syntax. Fix it, and test it
2016-04-26 10:29:44 -04:00
Andrea Bolognani
cb44737165 apibuild: Fix method call 2016-04-26 09:20:12 +02:00
Andrea Bolognani
4a98ebb07c apibuild: Introduce app class
All top-level functions have been moved to this class.

On top of that, the app.warning() method has been defined,
so that calls to it - already present in rebuild() - can
actually succeed.
2016-04-26 09:20:12 +02:00
Andrea Bolognani
ccaceab7bd apibuild: Add index.warning() method
This method is used in eg. index.merge(), but is not defined
anywhere. The implementation has been copied from docBuilder.
2016-04-26 09:20:12 +02:00
Andrea Bolognani
22a592a4fe docs: Pass relative paths to apibuild.py
Since commit d195cffa2e, both $(srcdir) and $(abs_builddir)
are passed to the apibuild.py script; however, since the
former is a relative path and the latter an absolute one, the
script might not be able to detect whether they point to the
same location.

Pass both as relative paths to avoid the issue.
2016-04-26 09:20:11 +02:00
Andrea Bolognani
7867c579ea docs: Fix some formatting oddities
When describing attributes and elements, we mostly stick to
a certain pattern; however, there are a few cases when the
information is not presented in the usual way.

Since there doesn't seem to be any reason not to follow the
tried and true formula, rework those bits to fit the rest of
the documentation.
2016-04-25 12:09:34 +02:00
Andrea Bolognani
1f29f3da06 syntax-check: Enforce <code> inside <dt> elements
Commit 61b070cf20 cleaned up a number of cases where the <dt>
element was used to document symbols, but the symbol itself was
not inside a <code> element.

To make sure we don't end up having to clean up again a few
months from now, introduce a syntax-check rule that can spot
such mistakes.

All existing exceptions are marked as such, with either file
or line granularity depending on the case.
2016-04-25 12:09:34 +02:00
Peter Krempa
d195cffa2e docs: apibuild: Fix VPATH build
libvirt-common.h is generated into builddir/include/libvirt. apibuild.py
only operated on srcdir/inlcude/libvirt. With VPATH build
srcdir/docs/libvirt-libvirt-common.html would not get generated and make
RPM failed.
2016-04-25 08:49:30 +02:00
Laine Stump
898d62313e docs: remove *other* reference to igmp for IPv6
This finishes the job started by commit 81f3839f8 - removing the
erroneous reference to nonexistent "igmp-ipv6" protocol.
2016-04-22 12:45:59 -04:00
John Ferlan
1e733c1928 docs: Add bold style for <dt><code> elements
Add bolding for <dt><code> elements to make them "stick out" on the
page rather that just a stream of text where the elements only differ
by slightly different font style.
2016-04-22 08:14:17 -04:00
Andrea Bolognani
61b070cf20 docs: Use <code> inside <dt> for symbols
Most of the time, the <dt> tag is used when providing
documentation for a symbol; enclose symbols in <code> tags to
style them appropriately.
2016-04-22 10:36:14 +02:00
Peter Krempa
2f745b63fd docs: apibuild: Fix for python 2.6
Ancient python didn't like the new list added in 99283874. Convert it to
a dict.
2016-04-22 10:14:13 +02:00
Laine Stump
81f3839f87 docs: remove reference to non-existent "igmp-ipv6" protocol
IGMP is used on IPv4 networks tp setup multicast group memberships. On
IPv6, this job is done by Multicast Listener Discovery (MLD), which
uses ICMPv6 packets rather than its own IP protocol number like IGMP.

The nwfilter documentation lists "igmp-ipv6" as one of the possible
protocols, but this is ignored (and stripped from the xml). This patch
removes that erroneous reference.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1038888
2016-04-21 16:32:12 -04:00
Peter Krempa
9928387473 api: Generate docs for libvirt-common.h
Since commit f5d9c5d00c moved the virTypedParam stuff into
libvirt-common we did not generate any docs for them and neither did we
populate them into libvirt-api.xml. This broke the sanity check in
libvirt python. Fix it by generating docs for libvirt-common.h too.
2016-04-21 15:39:08 +02:00
Peter Krempa
a253396a47 apibuild: Allow completely skipping certain macros
Some macros don't make sense to be documented at all. Add infrastructure
to the web/api generator and add VIR_DEPRECATED and VIR_EXPORT_VAR as
macros we should not document.
2016-04-21 15:39:08 +02:00
Cole Robinson
003fa6d676 docs: domain: Document network <filterref>
The proper nwfilter docs go into full detail, but we should still
have a brief bit about domain XML in the domain documentation
2016-04-20 16:33:24 -04:00
Michal Privoznik
8ed7c3a2cf docs: Don't leave any documentation behind
Our uninstall script is not exact counterpart of install one.
Therefore we are leaving couple of files behind. This should not
happen.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-04-20 17:34:06 +02:00
Michal Privoznik
265bb873c8 docs: Uninstall libvirt logo too
While we could leave it behind as an indelible sign that libvirt
has been running on host, other users might not be that fond of
it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-04-20 17:34:00 +02:00
Andrea Bolognani
eab0fda2ec docs: Document the new XML elements 2016-04-20 12:58:02 +02:00
Andrea Bolognani
24f17f557a schema: Validate GIC capabilities
We need to expose GIC capabilities in the domain capabilities
XML: update the schema to validate documents that contain the
new information.
2016-04-20 12:51:39 +02:00
Olga Krishtal
ee36975597 storage: add ploop volume type
Ploop image consists of directory with two files: ploop image itself,
called root.hds and DiskDescriptor.xml that contains information about
ploop device: https://openvz.org/Ploop/format.
Such volume are difficult to manipulate in terms of existing volume types
because they are neither a single files nor a directory.
This patch introduces new volume type - ploop. This volume type is used
by ploop volume's exclusively.

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2016-04-15 17:27:32 +02:00
Laine Stump
bc07251f59 conf: new pci controller model pcie-expander-bus
This controller provides a single PCIe port on a new root. It is
similar to pci-expander-bus, intended to provide a bus that can be
associated with a guest-identifiable NUMA node, but is for
machinetypes with PCIe rather than PCI (e.g. q35-based machinetypes).

Aside from PCIe vs. PCI, the other main difference is that a
pci-expander-bus has a companion pci-bridge that is automatically
attached along with it, but pcie-expander-bus has only a single port,
and that port will only connect to a pcie-root-port, or to a
pcie-switch-upstream-port. In order for the bus to be of any use in
the guest, it must have either a pcie-root-port or a
pcie-switch-upstream-port attached (and one or more
pcie-switch-downstream-ports attached to the
pcie-switch-upstream-port).
2016-04-14 14:00:34 -04:00
Laine Stump
52f3d0a4d2 conf: new pci controller model pci-expander-bus
This is a standard PCI root bus (not a bridge) that can be added to a
440fx-based domain. Although it uses a PCI slot, this is *not* how it
is connected into the PCI bus hierarchy, but is only used for
control. Each pci-expander-bus provides 32 slots (0-31) that can
accept hotplug of standard PCI devices.

The usefulness of pci-expander-bus relative to a pci-bridge is that
the NUMA node of the bus can be specified with the <node> subelement
of <target>. This gives guest-side visibility to the NUMA node of
attached devices (presuming that management apps only assign a device
to a bus that has a NUMA node number matching the node number of the
device on the host).

Each pci-expander-bus also has a "busNr" attribute. The expander-bus
itself will take the busNr specified, and all buses that are connected
to this bus (including the pci-bridge that is automatically added to
any expander bus of model "pxb" (see the next commit)) will use
busNr+1, busNr+2, etc, and the pci-root (or the expander-bus with next
lower busNr) will use bus numbers lower than busNr.
2016-04-14 14:00:34 -04:00
Laine Stump
5863b6e0c1 schema: allow pci address attributes to be in decimal
This is especially useful for "bus", since the bus of a device's pci
address is matched to the "index" of a controller to determine which
bus it will be connected to, and "index" is always specified in
decimal - being able to specify both in decimal at least makes it
easier to assure a device is being assigned to the correct bus when it
is added. For the other attributes, it is just a convenience.

(MB: the parser already allows for any of these attributes to be given
in decimal, and there are even examples floating around on the
internet that give them in decimal rather than hex (written in the
days before virsh did schema validation on all XML). This only updates
the schema to match the parser.)
2016-04-14 14:00:33 -04:00
Laine Stump
8995ad1179 schema: new basic type - uint16
This is a number between 0 and 65535 (or 0x0000 - 0xffff if specified
in hexadecimal).
2016-04-14 14:00:33 -04:00
Laine Stump
f97a03e70c schema: rename uint8range/uint24range to uint8/uint24
nwfilter.rng defines uint16range and uint32range, but in a different
manner (it also allows a variable name as the value, rather than just
a decimal or hex number). I wanted to add uint16range to
basictypes.rng, but my desired definition was parallel to those for
uint8range and uint24range which are defined in basictypes.rng - they
*don't* allow a variable name for the value.

The simplest path to make everyone happy is to make the "plain"
versions in basictypes.rng have simpler names - "uint8", "uint16", and
"uint24". This patch renames uint8range and uint24range to uint8 and
uint24, while the next patch will add uint16.
2016-04-14 14:00:33 -04:00
Laine Stump
51156bcff3 schema: make pci slot and function optional
The pcie-switch-downstream-port and pcie-root-port controllers have
only a single slot, numbered 0, and the greate majority of all guest
PCI devices are plugged into function 0 of whatever slot they're
using. The parser makes these optional, setting them to 0 when not
specified, and it's logical for the schema to also make them optional.
2016-04-14 14:00:33 -04:00
Cole Robinson
ea9c3da452 docs: formatdomain: document versions for video acceleration
clarify what version initial support was added, and when libvirt
started supporting it for the qemu driver

https://bugzilla.redhat.com/show_bug.cgi?id=657931
2016-04-14 13:21:59 -04:00
Cole Robinson
fd52de12c0 docs: domain: document blkiotune {read, write}_{bytes, iops}_sec
Added with commit 3b431929 in v1.2.2 but never documented

https://bugzilla.redhat.com/show_bug.cgi?id=1313613
2016-04-14 12:55:26 -04:00
Pavel Hrdina
f037a955a7 docs: rewrite graphics XML documentation
This cleanups the documentation, reformat some of the paragraphs to use
<p> instead of </br> and rewrites the listen part to be more extendable.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2016-04-08 17:36:27 +02:00
Andrea Bolognani
19b6709da8 docs: Remove unused div.body CSS rule
The 'body' CSS class is not used anywhere in the HTML files,
so we can get rid of the definition as well.
2016-04-08 17:31:19 +02:00
Vasiliy Tolstov
690969af9c libvirt domain xml allow to set peer address
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
2016-04-07 18:23:01 +01:00
Daniel Veillard
0086221cb3 Release of libvirt-1.3.3
- docs/news.html.in libvirt.spec.in: update for release
- po/*.po*: regenerated
2016-04-06 15:18:46 +08:00
Boris Fiuczynski
2ffa69ca97 docs: fix logfile paragraph
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2016-04-05 14:52:25 +02:00
Andrea Bolognani
bcbb593c97 docs: Remove useless p:first-line CSS rule
According to MDN[1], 'margin-left' and similar CSS properties,
including 'margin-right', cannot be applied to the '::first-line'
pseudo-element, so this rule will never have any effect and can
be safely removed.

[1] https://developer.mozilla.org/en/docs/Web/CSS/::first-line
2016-04-01 15:43:01 +02:00
Andrea Bolognani
5849729d09 docs: Remove unused #sponsor CSS rule
Commit e14c5069c5 dropped the only user of the 'sponsor'
CSS id, so we can drop it from the stylesheet as well.
2016-04-01 13:28:03 +02:00
Andrea Bolognani
b508a4f15f docs: Make most headers a bit smaller
Headers are bold already, so the font doesn't need to be that
big to draw attention.
2016-03-31 16:26:19 +02:00
Andrea Bolognani
2f171fa262 docs: Use bold text for all headers
All headers except for <h1> were already bold: make it bold as
well to increase visual consistency.
2016-03-31 16:26:19 +02:00
Andrea Bolognani
56b2af1205 docs: Don't use bold text for menu entries
The menu should not take the focus away from the actual contents.
2016-03-31 16:26:19 +02:00
Andrea Bolognani
0a56412d15 docs: Make menu entries smaller
The menu should not take the focus away from the actual contents.
2016-03-31 16:26:19 +02:00
Andrea Bolognani
4b0d9d5d02 docs: Don't use <strong> in headers
There's only one instance of that happening, and it looks
kinda off. Get rid of it, along with the corresponding
CSS rules.
2016-03-31 16:26:18 +02:00
Andrea Bolognani
ac05de6dba docs: Remove empty CSS rule 2016-03-31 16:26:18 +02:00
Andrea Bolognani
2f6e43d418 docs: Adjust vertical whitespace in CSS
Ensure all CSS rules are separated with a single blank line.
2016-03-31 16:26:18 +02:00