If the port allocator bitmap does not have enough bits to keep the state
of the port we're going to release, the port is not reserved and thus is
trivially released without doing anything. No need to report an error in
such case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Refactor the code to use virTypedParamList which simplifies cleanup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The helper constructs a virTypedParamList from loose params.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The returned value is used to unlock the object, so all callers must
necessarily make use of the returned value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The last use of this function was removed in commit 6d161bcc, so the
function is no longer used except as an internal implementation for
virCommandPassFD().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
commit f9236200 removed the last use of this function, so it can be
dropped.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
where it can be reused by other helpers.
No changes other than the move.
Note that this makes iohelper now dependent on -lutil and -lacl.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
this is in preparation for a minor refactoring of the copy
function itself out of runIO().
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In the past, we did set VLAN tag on <interface type='direct'/>.
However, during rewrite (v8.1.0-rc1~191) virNetDevSetVfConfig()
was changed and a condition that was responsible for calling
a function that sets VLAN tag was changed accidentally resulting
in VLAN tag not being set anymore.
However, because of other changes in the same patchset, it may
happen that @adminMac is NULL (this is to work around yet another
broken SRIOV driver), and thus we must refrain from setting MAC
and have to set VLAN tag only.
Fixes: 73961771a1
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If virNetDevSetVfMac() is called with either @macaddr or
@allowRetry arguments NULL an error is reported, because this is
considered invalid use. However, the error message is not
informative as it could be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Either create or append to existing docstring, the version (git tag)
that a given function was introduced in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
AMD cpus report Core (compute unit) identifiers of the cpu running the
instruction under leaf 0x8000001e. This data is not needed for libvirt
and actually breaks caching of the qemu capabilities where we check that
all of the CPU flags to be identical.
Mask out all of leaf 0x8000001e.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Raise the lower bound to '64' as that seems to currently be the first
size that can fit the CPU data for a modern cpu.
Lower the upper bound to an arbitrary 65536. So many cpu features ougth
to be enough for everyone.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In case when the 'KVM_GET_SUPPORTED_CPUID' ioctl on /dev/kvm would
fail for other reason than the documented E2BIG, our code would continue
looping and calling it while always increasing the memory buffer even
when that will not help.
Rewrite the function to allow another iteration only with the correct
errno.
Additionally rename the 'i' variable to 'alloc_size' as it's not a pure
iterator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move the filtering code into virHostCPUGetCPUIDFilterVolatile.
This also removes a safe but very questionable reuse of 'i' iterator in
the both the top level and nested loop. It's safe for now as the to
level loop will not iterate any more in the current state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The commit adding the code fetching host CPU flags via the
KVM_GET_SUPPORTED_CPUID didn't describe at all why such an alghorithm is
needed.
Add a comment from the documentation outlining how the userspace
function is expected to allocate memory here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to previous commits but with the targeting libvirt-common
in a batch.
Either create or append to existing docstring, the version (git tag)
that a given typedef, enum value, macro or function was introduced
in the format:
Since: v1.2.3
Signed-off-by: Victor Toso <victortoso@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit d73852c499 moved the original QEMU-specific helpers to
the utils module, which resulted in build failures on non-Unix
platforms due to the unconditional use of Unix-only symbols such
as _SC_CLK_TCK.
To deal with that situation, commit d7c64453aa made the helpers
Linux-only and added stubs for other platforms that, when called,
would always fail with ENOSYS.
However the original helpers had been carefully written so that,
while they would only be able to produce useful output on Linux,
they would still succeed on the other Unix platforms where we
build the QEMU driver.
Restore the original behavior so that calling APIs such as
virDomainGetInfo() can once again work on FreeBSD and macOS.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/298
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new function aggregates the internal working of virXMLFormatElement
and virXMLFormatElementEmpty and also allows skipping the newline
after the opening tag to allow using this helper also in cases where we
don't format any child elements but directly a value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need it for a single scenario in which prop='default' has to
be treated as valid input.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the workaround is specific to macOS, only disable compiler
warnings when building on that platform.
While at it, update the comment to reflect the fact that the
workaround is needed for all versions of the OS, including the
modern ones that we currently target.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When changing the size of pipe that virFileWrapperFdNew() creates
we start at 1MiB and if that fails because it's above the system
wide limit we get EPERM and continue with half of the size.
However, we might get another error in which case we should
report proper system error and return failure from
virFileWrapperFdNew().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
currently the only user of virFileWrapperFdNew is the qemu driver;
virsh save is very slow with a default pipe size.
This change improves throughput by ~400% on fast nvme or ramdisk.
Best value currently measured is 1MB, which happens to be also
the kernel default for the pipe-max-size.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
schemas are used for more than just documentation,
virsh edit fails if schemas are not available.
Therefore, fix the no-docs build by moving schemas/
to the parsing code inside src/conf/.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The virNetDevGenerateName() function uses a global array of
virNetDevGenName structs to find next unused name for network
device. This obviously needs some locking and in fact each member
of the array has its own lock. However, these members are not
virObjects, they are just plain structs, therefore
VIR_WITH_MUTEX_LOCK_GUARD() must be used instead of
VIR_WITH_OBJECT_LOCK_GUARD() to lock individual mutexes.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit 4e42686ade wrongly assumed how g_variant_new_parsed() works and broke
starting of domains on systems with systemd (machined).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since libvirt-guests script/service can operate on various URIs and we do
support both socket activation and traditional services, the ordering should be
specified for all the possible sockets and services.
Also remove the Wants= dependency since do not want to start any service. We
cannot know which one libvirt-guests is configured, so we'd have to start all
the daemons which would break if unused colliding services are not
masked (libvirtd.service in the modular case and all the modular daemon service
units in the monolithic scenario). Fortunately we can assume that the system is
configured properly to start services/sockets that are of interest to the user.
That also works with the setup described in https://libvirt.org/daemons.html .
To make it even more robust we add the daemon service into the machine units
created for individual domains as it was missing there.
https://bugzilla.redhat.com/show_bug.cgi?id=1868537
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The systemd version in RHEL-7 lacked support for the LISTEN_FDNAMES env
variable with socket activation. Since we stopped targetting RHEL-7 we
can drop some considerable amount of compatibility code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free 'path' inside the loop which fills it and return the
values directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can exit early when the input is an empty string, and we can
avoid storing the string length in a variable since we only use
that information once.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hw.cpufrequency sysctl, which we use to obtain the CPU
frequency on macOS, is not available when running on Apple
Silicon, and as a consequence we currently report an error
whenever such information is requested.
The virNodeInfo.mhz field, where the CPU frequency gets stored,
is documented as being zero when the information could not be
obtained, and we already do that for Linux on aarch64. Extend
this behavior to macOS on Apple Silicon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There are few places where a virPCIDeviceAddress typed variable
is allocated on the stack but it's not initialized. This can lead
to random values of its members which in turn can lead to a
random behaviour.
Generated with help of the following spatch:
@@
identifier I;
@@
- virPCIDeviceAddress I;
+ virPCIDeviceAddress I = { 0 };
And then fixing bhyveAssignDevicePCISlots() which does declare
the variable and then explicitly zero it by calling memset() only
to set a specific member afterwards.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When rewriting a file using virFileRewrite() and error occurs
while writing into a temporary file it's actually the callback
that can report the most accurate error. Move error reporting
into very few callback we have currently. Those callbacks are
trivial so the benefit of this change is not obvious, but this
will change shortly when slightly more complicated callback is
introduced.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, due to the way virFileRewrite() works, the rewritten
file is owned by user and group that the daemon runs under. So
far, this is not a problem, because the function is used to write
XML files or secrets for persistent objects (domains, networks,
etc.) and we don't need other users to read/write those files.
But shortly, this function is going to be used for creating files
for QEMU domains. There we want the QEMU process (i.e. different
user) to read the file.
Therefore, introduce two new arguments: @uid and @gid that allow
setting desired owner of the file. Pass -1 to preserve current
behaviour (i.e. create the file owned by the user running the
daemon).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
