A type to represent the new vsock device.
Also implement an allocation function to allow future addition
of private data.
https://bugzilla.redhat.com/show_bug.cgi?id=1291851
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Remove the locks since they are unnecessary and would cause
a hang for a driver reload/restart when a transient pool was
previously active as a result of the call:
virStoragePoolUpdateInactive:
...
if (!virStoragePoolObjGetConfigFile(obj)) {
virStoragePoolObjRemove(driver->pools, obj);
...
stack trace:
Thread 17 (Thread 0x7fffcc574700 (LWP 12465)):
...pthread_rwlock_wrlock
...virRWLockWrite
...virObjectRWLockWrite
...virStoragePoolObjRemove
...virStoragePoolUpdateInactive
...storagePoolUpdateStateCallback
...virStoragePoolObjListForEachCb
...virHashForEach
...virStoragePoolObjListForEach
...storagePoolUpdateAllState
...storageStateInitialize
...virStateInitialize
...daemonRunStateInit
...virThreadHelper
...start_thread
...clone
Introduced by commit id 4b2e0ed6e3.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When status XML was parsed the post-parse callbacks could not access
qemu caps and potentially upgrade the definition according to the
present caps. Implement the callback to pass it in.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The status XML parser function virDomainObjParseXML could not pass in
parseOpaque into the post parse callbacks. Add a callback which will
allow hypervisor drivers to fill it from the 'virDomainObj' data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When parsing status XML the post-parse callbacks can't access any
private data present in the status XML as the private bits were parsed
after invoking post-parse callbacks.
Move the invocation so that everything is parsed first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Its only use is now to check for duplicate boot order values,
which is now also done in virDomainDefPostParseCommon.
Remove it completely.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
As the function signature of virDomainDefPostParseInternal does not
differ from virDomainDefPostParse now, the wrapper can be dropped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Move the check for boot elements into a separate function
and remove its dependency on the parser-supplied bootHash table.
Reconstructing the hash table from the domain definition
effectively duplicates the check for duplicate boot order
values, also present in virDomainDeviceBootParseXML.
Now it will also be run on domains created by other means than XML
parsing, since it will be run even for code paths that did not supply
the bootHash table before.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Further patches will introduce validation and a default setting
of def->os.bootDevs in postParse.
Introduce a feature flag to opt out of this and set it in the vmx
driver, otherwise we would be adding it <boot dev='hd'/> into every
vmx config despite having no way to change it.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Trying to set any cache for <disk device='lun'/> makes no sense.
Such disk translates into -device scsi-block on the command line
and the device lacks any cache setting because it's merely a
middle man between qemu and real SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function creates a list of all (or migratable only) CPU features
supported by QEMU. It works by looking at the CPU model info returned by
query-cpu-model-expansion QMP command.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When computing a baseline CPU for a specific hypervisor we have to make
sure to include only CPU features supported by the hypervisor. Otherwise
the computed CPU could not be used for starting a new domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
To make it more consistent with the rest of the CPU driver code.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This is required for virCPUBaseline to accept a list of guest CPU
definitions since they do not have arch set.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Modern host CPU models from domain capabilities XMLs are reported as
guest CPU definitions with feature policies. This patch updates
virCPUx86Baseline to properly handle such CPU models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This command is a virsh wrapper for virConnectBaselineHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The new API computes the most feature-rich CPU which is compatible with
all given CPUs and can be provided by the specified hypervisor. It is a
more useful version of virConnectBaselineCPU, which doesn't consider any
hypervisor capabilities when computing the best CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This command is a virsh wrapper for virConnectCompareHypervisorCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This new API compares the given CPU description with the CPU the
specified hypervisor is able to provide on the host. It is a more useful
version of virConnectCompareCPU, which compares the CPU definition with
the host CPU without considering any specific hypervisor and its
abilities.
https://bugzilla.redhat.com/show_bug.cgi?id=1559832https://bugzilla.redhat.com/show_bug.cgi?id=1559835
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
virConnectGetDomainCapabilities needs to lookup QEMU capabilities
matching a specified binary, architecture, virt type, and machine type
while using default values when any of the parameters are not provided
by the user. Let's extract the lookup code into
virQEMUCapsCacheLookupDefault to make it reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The domain capabilities XML contains host CPU model tailored to a
specific hypervisor and since it's enclosed in <mode name='host-model'>
element rather then the required <cpu> it's impossible to directly use
the host CPU model as an input to, e.g., cpu-compare command. To make
this more convenient, vshExtractCPUDefXML now accepts full domain
capabilities XML and automatically transforms the host CPU models into
the form accepted by libvirt APIs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both cpu-compare and cpu-baseline commands accept more that just CPU
definition XML(s). For users' convenience they are able to extract the
CPU definition(s) even from domain XML or capabilities XML. The main
differences between the two commands is in the number of CPU definitions
they expect: cpu-compare wants only one CPU definition while
cpu-baseline expects one or more CPUs.
The extracted code forms a new vshExtractCPUDefXML function.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to cpu-models these two commands do not operate on a domain
and should be listed in the "Host and Hypervisor" commands section.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virDomainDetachDeviceAlias API is designed so that it only
sends detach request to qemu. It's user's responsibility to wait
for DEVICE_DELETED event, not libvirt's. Add @async flag to
qemuDomainDetach*Device() functions so that caller can chose if
detach is semi-synchronous (old virDomainDetachDeviceFlags()) or
fully asynchronous (new virDomainDetachDeviceFlags()).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fact that we are overwriting @ret multiple times makes it
difficult to see what is actually happening here. Follow our
traditional pattern where @ret is initialized to -1, and set to 0
only in case we know we succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Funny, we obtain driver caps at the beginning of the function,
but then for unknown reason access driver->caps directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are overwriting @ret a lot. It makes hard to see what is
actually going on. Use more gotos. Two functions are fixed here:
qemuDomainDetachShmemDevice() and qemuDomainDetachWatchdog().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On watchdog unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release watchdog device address,
2) call qemuDomainRemoveWatchdog() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
On shmem unplug, when qemu doesn't support DEVICE_DELETED event
(or couple of other reasons) we do two things:
1) release shmem device address,
2) call qemuDomainRemoveShmemDevice() which does 1) again.
This is potentially dangerous.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of releasing address only sometimes in
qemuDomainDetachChrDevice() let's release it whenever the device
is actually removed from the domain definition.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1566416
Commit id 'fe2af45b' added output for logical_block_size and
num_blocks for both removeable and fixed storage, but did not
update the nodedev capability causing virt-xml-validate to fail.
It's listed as optional only because it only prints if the
sizes are > 0. For a CDROM drive the values won't be formatted.
Update the nodedevxml2xmltest in order to output the values
for storage based on the logic from udevProcessRemoveableMedia
and udevProcessSD with respect to the logical_blocksize and
num_blocks calculations.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id '02129b7c0' added a single pagesElem for slightly
different purposes. One usage was an output for host page size
listing and the other for NUMA supported page sizes. For the
former, only the pages unit and size are formatted, while for
the latter the pages unit, size, and availability data is formatted.
The virt-xml-validate would fail because it expected something
extra in the host page size output. So split up pagesElem a bit
and create pagesHost and pagesNuma for the differences.
Modify some capabilityschemadata output to have the output - even
though the results may not be realistic with respect to the
original incarnation of the data.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id 'd2440f3b5' added printing the <microcode> for the
capabilities, but didn't update the capabilities schema.
While at it, update capabilityschemadata for caps-test2
and caps-test3 to output some value for validation.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
Commit id '0eced74f3' added vzmigr as a valid option for
virCapabilitiesAddHostMigrateTransport, but didn't update
the capabilities schema resulting in possible virt-xml-validate
failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1572491
Commit id 'b3fd95e36' added rdma as a valid option for
virCapabilitiesAddHostMigrateTransport, but didn't update
the capabilities schema resulting in possible virt-xml-validate
failure.
While at it, update the capabilityschemadata for caps-qemu-kvm
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
Commit id 'e4938ce2f' changed the esx_driver to use 'vpxmigr'
instead of esx for virCapabilitiesAddHostMigrateTransport, so
update the capabilities to allow virt-xml-validate to pass and
update the test to use the newer name.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by Michal Privoznik <mprivozn@redhat.com>
