To allow changing the name that is recorded in the top of the current
image chain used in a block pull/rebase operation, we need to specify
the backing name to qemu. This is done via the "backing-file" attribute
to the block-stream commad.
To allow changing the name that is recorded in the overlay of the TOP
image used in a block commit operation, we need to specify the backing
name to qemu. This is done via the "backing-file" attribute to the
block-commit command.
We are about to turn on support for active block commit. Although
qemu 2.0 was the first version to mostly support it, that version
mis-handles 0-length files, and doesn't have anything available for
easy probing. But qemu 2.1 fixed bugs, and made life simpler by
letting the 'top' argument be optional. Unless someone begs for
active commit with qemu 2.0, for now we are just going to enable
it only by probing for qemu 2.1 behavior (anyone backporting active
commit can also backport the optional argument behavior). This
requires qemu.git commit 7676e2c597000eff3a7233b40cca768b358f9bc9.
Although all our actual uses of block-commit supply arguments for
both base and top, we can omit both arguments and use a bogus
device string to trigger an interesting behavior in qemu. All QMP
commands first do argument validation, failing with GenericError
if a mandatory argument is missing. Once that passes, the code
in the specific command gets to do further checking, and the qemu
developers made sure that if device is the only supplied argument,
then the block-commit code will look up the device first, with a
failure of DeviceNotFound, before attempting any further argument
validation (most other validations fail with GenericError). Thus,
the category of error class can reliably be used to decipher
whether the top argument was optional, which in turn implies a
working active commit. Since we expect our bogus device string to
trigger an error either way, the code is written to return a
distinct return value without spamming the logs.
* src/qemu/qemu_monitor.h (qemuMonitorSupportsActiveCommit): New
prototype.
* src/qemu/qemu_monitor.c (qemuMonitorSupportsActiveCommit):
Implement it.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Allow NULL for top and base, for probing purposes.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise, implementing the probe.
* tests/qemumonitorjsontest.c (mymain): Enable...
(testQemuMonitorJSONqemuMonitorSupportsActiveCommit): ...a new test.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemuMonitorJSONSendKey declares the "holdtime" argument as unsigned int
while the command was constructed in qemuMonitorJSONMakeCommand using
the "P" modifier which took a unsigned long from the variable
arguments which then made it possible to access uninitialized memory.
This broke the qemumonitorjsontest on 32bit fedora 20:
64) qemuMonitorJSONSendKey
... libvirt: QEMU Driver error : internal error: unsupported data type 'W' for arg 'WVSì D$0èwÿÿÃAå' FAILED
Uncovered by upstream commit f744b831c66d9e82453f7a96cab5eddf7570c253.
Additionally add test for the hold-time option.
This patch adds option to specify that a json qemu command argument is
optional without the need to use if's or ternary operators to pass the
list. Additionally all the modifier characters are documented to avoid
user confusion.
In "src/conf/domain_conf.h" there are many enum declarations. The
cleanup in this header filer was started, but it wasn't enough and
there are many other files that has enum variables declared. So, the
commit was starting to be big. This commit finish the cleanup in this
header file and in other files that has enum variables, parameters,
or functions declared.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If virDomainMemoryStats is called too soon after domain startup,
QEMU returns:
"error":{"class":"GenericError","desc":"guest hasn't updated any stats yet"}
when we try to query balloon stats.
Check for this reply and log it as OPERATION_INVALID instead of
INTERNAL_ERROR. This means the daemon only logs it at the debug level,
without polluting system logs.
Reported by Laszlo Pal:
https://www.redhat.com/archives/libvirt-users/2014-May/msg00023.html
nmdm is a FreeBSD driver which allows to create a pair of tty
devices one of which is passed to the guest and second is used
by the client.
This patch adds new 'nmdm' character device type. Its definition
looks this way:
<serial type='nmdm'>
<source master='/dev/nmdm0A' slave='/dev/nmdm0B'/>
</serial>
Master is passed to the hypervisior and slave is used for client
connection.
Also implement domainOpenConsole() for bhyve driver based on that.
This patch adds qemuMonitorGetDumpGuestMemoryCapability, which is used to check
whether the specified dump-guest-memory format is supported by qemu.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Wire up all the pieces to send arbitrary qemu events to a
client using libvirt-qemu.so. If the extra bookkeeping of
generating event objects even when no one is listening turns
out to be noticeable, we can try to further optimize things
by adding a counter for how many connections are using events,
and only dump events when the counter is non-zero; but for
now, I didn't think it was worth the code complexity.
* src/qemu/qemu_driver.c
(qemuConnectDomainQemuMonitorEventRegister)
(qemuConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu/qemu_monitor.h (qemuMonitorEmitEvent): New prototype.
(qemuMonitorDomainEventCallback): New typedef.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONIOProcessEvent):
Report events.
* src/qemu/qemu_monitor.c (qemuMonitorEmitEvent): New function, to
pass events through.
* src/qemu/qemu_process.c (qemuProcessHandleEvent): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The dtrace probe macros rely on the logging API. We can't make
the internal.h header include the virlog.h header though since
that'd be a circular include. Instead simply split the dtrace
probes into their own header file, since there's no compelling
reason for them to be in the main internal.h header.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While investigating https://bugzilla.redhat.com/show_bug.cgi?id=1061827
I noticed that we pass user input unscathed for block-pull, but
always pass a canonical absolute name through for block-commit.
[Note that we probably _ought_ to validate that the user's request
for block-pull actually matches the backing chain, the way we already
do for block-commit - but that's a separate issue. Further note that
the ability to pass user input through unscathed allows backdoors
such as specifying a backing image that is a network URI such as
a gluster disk, instead of forcing things to the local file system;
which is an area still under active investigation on whether libvirt
needs to behave differently for network disks.]
Since qemu may write the name that the user passed in as the backing
file, a user may have a reason to want a relative file name passed
through to qemu, and always munging things to absolute prevents that.
Put another way, if you have the backing chain:
[A] <- [B(back=./A)] <- [C(back=./B)]
and commit B into A (virsh blockcommit $dom vda --base A --top B),
the metadata of C will have to be re-written. But should it be
rewritten as [C(back=./A)] or as [C(back=/path/to/A)]? Still up in
the air is whether qemu's decision should be based on whether B
and/or C had relative paths, or on whether the --base and/or
--top arguments to the command were relative paths; but if we always
pass a canonical name, we've prevented the spelling of the command
arguments from being part of the hueristics that qemu uses.
I also audited the code, and verified that we never call
qemuMonitorBlockCommit() with a NULL base, either before or after
the change to qemu_driver.c.
* src/qemu/qemu_driver.c (qemuDomainBlockCommit): Preserve user's
spelling, since absolute vs. relative matters to qemu.
* src/qemu/qemu_monitor.h (qemuMonitorBlockCommit): Base is never
null.
* src/qemu/qemu_monitor.c (qemuMonitorBlockCommit): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockCommit):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockCommit):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemuMonitorJSONBlockJob handles a few errors internally. If qemu
returns a different error we would report a rather unhelpful message:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error
As the actual message from qemu contains a bit more info, let's use it
to report something a little more useful:
$ virsh blockpull gluster-job vda --base /dev/null
error: internal error: Unexpected error: (GenericError) 'Base '/dev/null' not found'
In qemuMonitorJSONExtractCPUInfo an error message hinted on missing
character device data which is wrong.
Also a comment states that only qemu-kvm tree includes the thread_id
field. This is no longer true.
Add a new character device backend called 'spiceport' that uses
spice's channel for communications and apart from spicevmc can be used
as a backend for any character device from libvirt's point of view.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
On the domain startup, this function is called to dump some info about
the CPUs. At the beginning of the function we check if we aren't running
older qemu which is not exposing the CPUs via 'qom-list'. However, we
are not checking for even older qemus, which throw 'CommandNotFound'
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The QOM path in qemu that contains the CPUID registers of a running VM
may not be present (introduced in QEMU 1.5).
Since commit d94b7817719 we have a regression with QEMU that don't
support reporting of the CPUID register state via the monitor as the
process startup code expects the path to exist.
This patch adds code that checks with the monitor if the requested path
already exists and uses it only in this case.
The qemu monitor supports retrieval of actual CPUID bits presented to
the guest using QMP monitor. Add APIs to extract these information and
tests for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/qemu.
* src/qemu/qemu_bridge_filter.h (networkAllowMacOnPort)
(networkDisallowMacOnPort): Use intended type.
* src/qemu/qemu_bridge_filter.c (networkAllowMacOnPort)
(networkDisallowMacOnPort): Likewise.
* src/qemu/qemu_command.c (qemuBuildTPMBackendStr)
(qemuBuildTPMDevStr, qemuBuildCpuArgStr)
(qemuBuildObsoleteAccelArg, qemuBuildMachineArgStr)
(qemuBuildSmpArgStr, qemuBuildNumaArgStr): Likewise.
* src/qemu/qemu_conf.c (qemuSharedDeviceEntryCopy): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSaveImageStartVM): Likewise.
* src/qemu/qemu_hostdev.c
(qemuDomainHostdevNetConfigVirtPortProfile): Likewise.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONAttachCharDevCommand): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When querying for kvm, we try to find 'enabled' field. Hence the error
message should report we haven't found 'enabled' and not 'running'
(which is not even in the reply). Probably a typo or copy-paste error.
Most callers of qemuParseKeywords were assigning its return
value to a 'size_t' variable. Then then also checked '< 0'
for error condition, but this will never be true with the
unsigned size_t variable. Rather than using 'ssize_t', change
qemuParseKeywords so that the element count is returned via
an output parameter, leaving the return value solely as an
error indicator.
This avoids a crash accessing beyond the end of an error
upon OOM.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch will add the qemuMonitorJSONGetMemoryStats() to execute a
"guest-stats" on the balloonpath using "get-qom" replacing the former
mechanism which looked through the "query-ballon" returned data for
the fields. The "query-balloon" code only returns 'actual' memory.
Rather than duplicating the existing code, have the JSON API use the
GetBalloonInfo API.
A check in the qemuMonitorGetMemoryStats() will be made to ensure the
balloon driver path has been set. Since the underlying JSON code can
return data not associated with the balloon driver, we don't fail on
a failure to get the balloonpath. Of course since we've made the check,
we can then set the ballooninit flag. Getting the path here is primarily
due to the process reconnect path which doesn't attempt to set the
collection period.
At vm startup and attach attempt to set the balloon driver statistics
collection period based on the value found in the domain xml file. This
is not done at reconnect since it's possible that a collection period
was set on the live guest and making the set period call would reset to
whatever value is stored in the config file.
Setting the stats collection period has a side effect of searching through
the qom-list output for the virtio balloon driver and making sure that it
has the right properties in order to allow setting of a collection period
and eventually fetching of statistics.
The walk through the qom-list is expensive and thus the balloonpath will
be saved in the monitor private structure as well as a flag indicating
that the initialization has already been attempted (in the event that a
path is not found, no sense to keep checking).
This processing model conforms to the qom object model model which
requires setting object properties after device startup. That is, it's
not possible to pass the period along via the startup code as it won't
be recognized.
Add a new qemuMonitorJSONSetObjectProperty() method to support invocation
of the 'qom-set' JSON monitor command with a provided path, property, and
expected data type to set.
NOTE: The set API was added only for the purpose of the qemumonitorjsontest
The test code uses the same "/machine/i440fx" property as the get test and
attempts to set the "realized" property to "true" (which it should be set
at anyway).
Add a new qemuMonitorJSONGetObjectProperty() method to support invocation
of the 'qom-get' JSON monitor command with a provided path, property, and
expected data type return. The qemuMonitorJSONObjectProperty is similar to
virTypedParameter; however, a future patch will extend it a bit to include
a void pointer to balloon driver statistic data.
NOTE: The ObjectProperty structures and API are added only for the
purpose of the qemumonitorjsontest
The provided test will execute a qom-get on "/machine/i440fx" which will
return a property "realized".
Add a new qemuMonitorJSONGetObjectListPaths() method to support invocation
of the 'qom-list' JSON monitor command with a provided path.
NOTE: The ListPath structures and API's are added only for the
purpose of the qemumonitorjsontest
The returned list of paired data fields of "name" and "type" that can
be used to peruse QOM configuration data and eventually utilize for the
balloon statistics.
The test does a "{"execute":"qom-list", "arguments": { "path": "/"}}" which
returns "{"return": [{"name": "machine", "type": "child<container>"},
{"name": "type", "type": "string"}]}" resulting in a return of an array
of 2 elements with [0].name="machine", [0].type="child<container>". The [1]
entry appears to be a header that could be used some day via a command such
as "virsh qemuobject --list" to format output.
The function being introduced is responsible for preparing and
executing 'chardev-add' qemu monitor command. Moreover, in case
of PTY chardev, the corresponding pty path is updated.
Currently, we are building InetSocketAddress qemu json type
within the qemuMonitorJSONNBDServerStart function. However, other
future functions may profit from the code as well. So it should
be moved into a static function.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add monitor callback API domainGuestPanic, that implements
'destroy', 'restart' and 'preserve' events of the 'on_crash'
in the XML when domain crashed.
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
This patch implements support for the "cpu-add" QMP command that plugs
CPUs into a live guest. The "cpu-add" command was introduced in QEMU
1.5. For the hotplug to work machine type "pc-i440fx-1.5" is required.
Commit bd56d0d8 could lead to freeing an uninitialized pointer:
qemu/qemu_monitor_json.c: In function 'qemuMonitorJSONGetCommandLineOptionParameters':
qemu/qemu_monitor_json.c:4284: warning: 'cmd' may be used uninitialized in this function
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetCommandLineOptionParameters): Initialize variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since the conversion to using only QMP for probing features
of qemu 1.2 and newer, we have been unable to detect features
that are added only by additional command line options. For
example, we'd like to know if '-machine mem-merge=on' (added
in qemu 1.5) is present. To do this, we will take advantage
of qemu 1.5's query-command-line-parameters QMP call [1].
This patch wires up the framework for probing the command results;
if the QMP command is missing, or if a particular command line
option does not output any parameters (for example, -net uses
a polymorphic parser, which showed up as no parameters as of qemu
1.5), we silently treat that command as having no results.
[1] https://lists.gnu.org/archive/html/qemu-devel/2013-04/msg05180.html
* src/qemu/qemu_monitor.h (qemuMonitorGetOptions)
(qemuMonitorSetOptions)
(qemuMonitorGetCommandLineOptionParameters): New functions.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
* src/qemu/qemu_monitor.c (_qemuMonitor): Add cache field.
(qemuMonitorDispose): Clean it.
(qemuMonitorGetCommandLineOptionParameters): Implement new function.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
(testQemuMonitorJSONGetCommandLineParameters): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
