Refactor the code that builds the pool source string during the FS
storage pool mount to be a separate helper.
A future patch will use the helper in order to validate the mounted
FS matches the pool's expectation during poolCheck processing
The libvirt file system storage driver determines what file to
act on by concatenating the pool location with the volume name.
If a user is able to pick names like "../../../etc/passwd", then
they can escape the bounds of the pool. For that matter,
virStoragePoolListVolumes() doesn't descend into subdirectories,
so a user really shouldn't use a name with a slash.
Normally, only privileged users can coerce libvirt into creating
or opening existing files using the virStorageVol APIs; and such
users already have full privilege to create any domain XML (so it
is not an escalation of privilege). But in the case of
fine-grained ACLs, it is feasible that a user can be granted
storage_vol:create but not domain:write, and it violates
assumptions if such a user can abuse libvirt to access files
outside of the storage pool.
Therefore, prevent all use of volume names that contain "/",
whether or not such a name is actually attempting to escape the
pool.
This changes things from:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
Vol ../../../../../../etc/haha created
$ rm /etc/haha
to:
$ virsh vol-create-as default ../../../../../../etc/haha --capacity 128
error: Failed to create vol ../../../../../../etc/haha
error: Requested operation is not valid: volume name '../../../../../../etc/haha' cannot contain '/'
Signed-off-by: Eric Blake <eblake@redhat.com>
Similar to the openflags which allow VIR_STORAGE_VOL_OPEN_NOERROR to be
passed to avoid open errors, add a 'readflags' variable so that in the
future read failures could also be ignored.
Similar to commit id '35847860', it's possible to attempt to create
a 'netfs' directory in an NFS root-squash environment which will cause
the 'vol-delete' command to fail. It's also possible error paths from
the 'vol-create' would result in an error to remove a created directory
if the permissions were incorrect (and disallowed root access).
Thus rename the virFileUnlink to be virFileRemove to match the C API
functionality, adjust the code to following using rmdir or unlink
depending on the path type, and then use/call it for the VIR_STORAGE_VOL_DIR
In an NFS root-squashed environment the 'vol-delete' command will fail to
'unlink' the target volume since it was created under a different uid:gid.
This code continues the concepts introduced in virFileOpenForked and
virDirCreate[NoFork] with respect to running the unlink command under
the uid/gid of the child. Unlike the other two, don't retry on EACCES
(that's why we're here doing this now).
Currently, when trying to virsh pool-define/virsh pool-build a new
'dir' pool, if the target directory already exists, virsh
pool-build/virStoragePoolBuild will error out. This is a change of
behaviour compared to eg libvirt 1.2.13
This is caused by the wrong type being used for the dir_create_flags
variable in virStorageBackendFileSystemBuild , it's defined as a bool
but is used as a flag bit field so should be unsigned int (this matches
the type virDirCreate expects for this variable).
This should fix https://bugzilla.gnome.org/show_bug.cgi?id=752417 (GNOME
Boxes) and https://bugzilla.redhat.com/show_bug.cgi?id=1244080
(downstream virt-manager).
https://bugzilla.redhat.com/show_bug.cgi?id=1227664
If the requested format type for the new entry in the file system pool
is a 'dir', then be sure to set the vol->type correctly as would be done
when the pool is refreshed.
https://bugzilla.redhat.com/show_bug.cgi?id=1186969
When generating the path to the dir for a CIFS/Samba driver, the code
would generate a source path for the mount using "%s:%s" while the
mount.cifs expects to see "//%s/%s". So check for the cifsfs and
format the source path appropriately.
Additionally, since there is no means to authenticate, the mount
needs a "-o guest" on the command line in order to anonymously mount
the Samba directory.
In order for the glusterfs boolean to be set, the pool->def->type must be
VIR_STORAGE_POOL_NETFS, thus the check within virCommandNewArgList whether
pool->def->type is VIR_STORAGE_POOL_FS will never be true, so remove it
https://bugzilla.redhat.com/show_bug.cgi?id=1181087
The virStorageBackendFileSystemIsMounted is called from three source paths
checkPool, startPool, and stopPool. Both start and stop validate the FS
fields before calling *IsMounted; however the check path there is no call.
This could lead the code into returning a true in "isActive" if for some
reason the target path for the pool was mounted. The assumption being
that if it was mounted, then we believe we started/mounted it.
It's also of note that commit id '81165294' added an error message for
the start/mount path regarding that the target is already mounted so
fail the start. That check was adjusted by commit id '13fde7ce' to
only message if actually mounted.
At one time this led to the libvirtd restart autostart code to declare
that the pool was active even though the startPool would inhibit startup
and the stopPool would inhibit shutdown. The autostart path changed as
of commit id '2a31c5f0' as part of the keep storage pools started between
libvirtd restarts.
This patch adds the same check made prior to start/mount and stop/unmount
to ensure we have a valid configuration before attempting to see if the
target is already mounted to declare "isActive" or not. Finding an improper
configuration will now cause an error at checkPool, which should make it
so we can no longer be left in a situation where the pool was started and
we have no way to stop it.
https://bugzilla.redhat.com/show_bug.cgi?id=1181087
Currently the assumption on the error message is that there are
no source device paths defined when the number of devices check
fails, but in reality the XML could have had none or it could have
had more than the value supported. Adjust the error message accordingly
to make it clearer what the error really is.
The code already exists there, it just modified different flags. I just
noticed this when looking at the code. This patch is better to view
with bigger context or '-W'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Only set directory permissions at pool build time, if:
- User explicitly requested a mode via the XML
- The directory needs to be created
- We need to do the crazy NFS root-squash workaround
This allows qemu:///session to call build on an existing directory
like /tmp.
The XML parser sets a default <mode> if none is explicitly passed in.
This is then used at pool/vol creation time, and unconditionally reported
in the XML.
The problem with this approach is that it's impossible for other code
to determine if the user explicitly requested a storage mode. There
are some cases where we want to make this distinction, but we currently
can't.
Handle <mode> parsing like we handle <owner>/<group>: if no value is
passed in, set it to -1, and adjust the internal consumers to handle
it.
In order to be able to use 'checkPool' inside functions which do not
have any connection reference, 'conn' attribute needs to be discarded
from the checkPool's signature, since it's not used by any storage backend
anyway.
While the main storage driver code allows the flag
VIR_STORAGE_VOL_RESIZE_SHRINK to be set, none of the backend
drivers are supporting it. At the very least this can work
for plain file based volumes since we just ftruncate() them
to the new size. It does not work with qcow2 volumes, but we
can arguably delegate to qemu-img for error reporting for that
instead of second guessing this for ourselves:
$ virsh vol-resize --shrink /home/berrange/VirtualMachines/demo.qcow2 2G
error: Failed to change size of volume 'demo.qcow2' to 2G
error: internal error: Child process (/usr/bin/qemu-img resize /home/berrange/VirtualMachines/demo.qcow2 2147483648) unexpected exit status 1: qemu-img: qcow2 doesn't support shrinking images yet
qemu-img: This image does not support resize
See also https://bugzilla.redhat.com/show_bug.cgi?id=1021802
When creating a RAW file, we don't take advantage
of clone of btrfs.
Add a VIR_STORAGE_VOL_CREATE_REFLINK flag to request
a reflink copy.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since cd4d547576
Coverity notes that setting 'ret = -3' prior to the unconditional
setting of 'ret = 0' will cause the value to be UNUSED.
Since the comment indicates that it is expect to allow the code
to continue, just remove the ret = -3 setting.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use correct mode when pre-creating files (for snapshots). The refactor
changing to storage driver usage caused a regression as some systems
created the file with 000 permissions forbidding qemu to write the file.
Pass mode to the creating functions to avoid the problem.
Regression since 185e07a5f8.
Gluster storage works on a similar principle to NFS where it takes the
uid and gid of the actual process and uses it to access the storage
volume on the remote server. This introduces a need to chown storage
files on gluster via native API.
For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710
Use the backing store parser to properly create the information about a
volume's backing store. Unfortunately as the storage driver isn't
prepared to allow volumes backed by networked filesystems add a
workaround that will avoid changing the XML output.
For non-local storage drivers we can't expect to use the FDStream
backend for up/downloading volumes. Split the code into a separate
backend function so that we can add protocol specific code later.
Different protocols have different means to uniquely identify a storage
file. This patch implements a storage driver API to retrieve a unique
string describing a volume. The current implementation works for local
storage only and returns the canonical path of the volume.
To add caching support the local filesystem driver now has a private
structure holding the cached string, which is created only when it's
initially accessed.
This patch provides the implementation for local files only for start.
Use virStorageFileGetMetadataFromFD instead in
virStorageBackendProbeTarget as it now returns all required data and the
storage file is already open in a filedescriptor.
Also fix improper error code being returned when virFileReadHeaderFD
would fail as virStorageBackendUpdateVolTargetInfoFD would set the
return code to 0.
Add storage driver based functions to access headers of storage files
for metadata extraction. Along with this patch a local filesystem and
gluster via libgfapi implementation is provided. The gluster
implementation is based on code of the saferead_lim function.
Print the debug statements of individual file access functions from the
main API functions instead of the individual backend functions.
Also enhance initialization debug messages on a per-backend basis.
All callers of virStorageFileGetMetadataFromBuf were first calling
virStorageFileProbeFormatFromBuf, to learn what format to pass in.
But this function is already wired to do the exact same probe if
the incoming format is VIR_STORAGE_FILE_AUTO, so it's simpler to
just refactor the probing into the central function.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
Drop parameter.
(virStorageFileProbeFormatFromBuf): Drop declaration.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf):
Do probe here instead of in callers.
(virStorageFileProbeFormatFromBuf): Make static.
* src/libvirt_private.syms (virstoragefile.h): Drop function.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Update caller.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
