This patch introduces
<cache level='N' mode='emulate'/>
<cache mode='passthrough'/>
<cache mode='disable'/>
sub element of /domain/cpu. Currently only a single <cache> element is
allowed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's lot more to document about the nodedev driver, besides PCI and
SR-IOV (even this might need to be extended), but let's start small-ish
and at least have a page for it linked from the drivers.html.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since we do have this template at hand, why not using it wherever
possible (list of supported pool types and remote access section).
Also, perform some stylistic micro adjustments.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We are currently parsing only rx/frames/max because that's the only
value that makes sense for us. The tun device just added support for
this one and the others are only supported by hardware devices which
we don't need to worry about as the only way we'd pass those to the
domain is using <hostdev/> or <interface type='hostdev'/>. And in
those cases the guest can modify the settings itself.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
docs/schemas directory is meant for schemas which are installed on the
system. The schema for the news file does not need to be installed.
Store it along with the file it describes for simplicity.
qemu requires that the topology equals to the maximum vcpu count.
Document this along with the API to set maximum vcpu count and the XML
element.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1426220
Creating dummy <change> elements was a workaround for the
HTML DTD not allowing empty <ul> elements, but we can do
better by tweaking the the XSLT stylesheet.
Now that the source file is validated against a schema that
only allows the <code> HTML tag to be used, we can rely on
that assumption to simplify our XSLT stylesheet.
After the release it's necessary to add a new <release> section for the
upcoming release. Add a template so that it does not have to be
compiled over and over again.
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set
allow omitting the <name> element and instead fill out the pool name
from the <source><name> element.
Relax the schema to make <name> optional for these pools.
Expressing that at least one of these is required is out of scope
of the schema.
Commits 29f7b5ea6a and 5edf9aaf54 pushed them incorrectly at the end of
the file in the bug fixes section for libvirt 2.5.0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When reading release notes, patch summary is not always the best
description of what users can expect in new version. I propose
changing it slightly so that it describes what exactly happens and
when.
However, we do not have to add every single code change to the news
file, that would be ridiculous and unreadable for users. If the patch
subject needs changes like this one, I'm rather tempted to say that
such changes should not be in the news file at all. So that would be
the other way how to fix this.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This brings the libvirt version of this RNG file in line with the same
file in netcf (as soon as the corresponding patch there is ACKed and
pushed).
There's no reason to require it when defining an interface (the config
option it corresponds to is optional), and it isn't even output in the
status of an interface.
Resolves: https://bugzilla.redhat.com/1414404
A mediated device will be identified by a UUID (with 'model' now being
a mandatory <hostdev> attribute to represent the mediated device API) of
the user pre-created mediated device. We also need to make sure that if
user explicitly provides a guest address for a mdev device, the address
type will be matching the device API supported on that specific mediated
device and error out with an incorrect XML message.
The resulting device XML:
<devices>
<hostdev mode='subsystem' type='mdev' model='vfio-pci'>
<source>
<address uuid='c2177883-f1bb-47f0-914d-32a22e3a8804'>
</source>
</hostdev>
</devices>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
For some drivers the domain's machine type makes no sense. They
just don't use it. A great example is bhyve driver. Therefore it
makes very less sense to report machine in domain capabilities
XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The attribute can be used to request a specific way of checking whether
the virtual CPU matches created by the hypervisor matches the
specification in domain XML.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
QEMU 2.9 introduces the pcie-root-port device, which is
a generic version of the existing ioh3420 device.
Make the new device available to libvirt users.
RFC 6331 documents a number of serious security weaknesses in
the SASL DIGEST-MD5 mechanism. As such, libvirtd should not
by using it as a default mechanism. GSSAPI is the only other
viable SASL mechanism that can provide secure session encryption
so enable that by defalt as the replacement.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For NVDIMM devices it is optionally possible to specify the size
of internal storage for namespaces. Namespaces are a feature that
allows users to partition the NVDIMM for different uses.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Now that NVDIMM has found its way into libvirt, users might want
to fine tune some settings for each module separately. One such
setting is 'share=on|off' for the memory-backend-file object.
This setting - just like its name suggest already - enables
sharing the nvdimm module with other applications. Under the hood
it controls whether qemu mmaps() the file as MAP_PRIVATE or
MAP_SHARED.
Yet again, we have such config knob in domain XML, but it's just
an attribute to numa <cell/>. This does not give fine enough
tuning on per-memdevice basis so we need to have the attribute
for each device too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
NVDIMM is new type of memory introduced into QEMU 2.6. The idea
is that we have a Non-Volatile memory module that keeps the data
persistent across domain reboots.
At the domain XML level, we already have some representation of
'dimm' modules. Long story short, NVDIMM will utilize the
existing <memory/> element that lives under <devices/> by adding
a new attribute 'nvdimm' to the existing @model and introduce a
new <path/> element for <source/> while reusing other fields. The
resulting XML would appear as:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
So far, this is just a XML parser/formatter extension. QEMU
driver implementation is in the next commit.
For more info on NVDIMM visit the following web page:
http://pmem.io/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
bhyve supports 'gop' video device that allows clients to connect
to VMs using VNC clients. This commit adds support for that to
the bhyve driver:
- Introducr 'gop' video device type
- Add capabilities probing for the 'fbuf' device that's
responsible for graphics
- Update command builder routines to let users configure
domain's VNC via gop graphics.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
This documents the preferred conventions for naming files,
structs, enums, typedefs and functions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The generated HTML will contain <ul></ul> otherwise, which
triggers an error during 'make check'.
The proper fix would be not to generate the problematic
HTML in the first place but, while I'm working on it, this
workaround will do.
The guest CPU definition has always been updated automatically during
migration. And currently we just transform any host-model CPU into a
custom one when a domain starts.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With that users could access files outside /dev/shm. That itself
isn't a security problem, but might cause some errors we want to
avoid. So let's forbid slashes as we do with domain and volume names
and also mention that in the schema.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1395496
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add a new attribute 'rendernode' to <gl> spice element.
Give it to QEMU if qemu supports it (queued for 2.9).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add a new 'drm' capability for Direct Rendering Manager (DRM) devices,
providing device type information.
Teach the udev backend to populate those devices.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add new <devnode> top-level <device> element, that list the associated
/dev files. Distinguish the main /dev name from symlinks with a 'type'
attribute of value 'dev' or 'symlink'.
Update a test to check XML schema, and actually add it to the test list
since it was missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Before 9c17d665fd (v1.3.2 - I know, right?) it was possible to
have the following interface configuration:
<interface type='ethernet'/>
<script path=''/>
</interface>
This resulted in -netdev tap,script=,.. Fortunately, qemu helped
us to get away with this as it just ignored the empty script
path. However, after the commit mentioned above it's libvirtd
who is executing the script. Unfortunately without special
case-ing empty script path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This part introduces new xml elements for file based
memorybacking support and their parsing.
(It allows vhost-user to be used without hugepages.)
New xml elements:
<memoryBacking>
<source type="file|anonymous"/>
<access mode="shared|private"/>
<allocation mode="immediate|ondemand"/>
</memoryBacking>
Example:
<network>
...
<mtu size='9000'/>
...
If mtu is unset, it's assumed that we want the default for whatever is
the underlying transport (usually this is 1500).
This setting isn't yet wired in, so it will have no effect.
This partially resolves: https://bugzilla.redhat.com/1224348
Updating docs/news.xml in the same commit that performs the
documented change makes backports needlessly complicated,
both for mainteinance branches and downstream distributions,
because it introduces additional potential for merge
conflicts.
Document in the contributor guidelines that the release notes
should be updated in a separate commit instead, so that it's
easy to backport just the code change.
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
fabric_name is one of many fc_host attributes in Linux that is optional
and left to the low-level driver to decide if it is implemented.
The zfcp device driver does not provide a fabric name for an fcp host.
This patch removes the requirement for a fabric name by making it optional.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
