The text monitor code was checking for a '\n' prefix on several
places. Previously this would work, but since the monitor code
re-write the '\n' is already stripped off, so mustn't be checked
for.
* src/qemu/qemu_monitor_text.c: Fix monitor error checking
Probably as a result of a merge error, the CPU hotplug command
names were completely wrong.
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
the CPU hotplug command names
Adds ability to provide a preferred CPU model for CPUID data decoding.
Such model would be considered as the best possible model (if it's
supported by hypervisor) regardless on number of features which have to
be added or removed for describing required CPU.
So far, when CPUID data were converted into CPU model and features, the
features can only be added to the model. As a result, when a guest asked
for something like "qemu64,-svm" it would get a qemu32 plus a bunch of
additional features instead.
This patch adds support for removing feature from the base model.
Selection algorithm remains the same: the best CPU model is the model
which requires lowest number of features to be added/removed from it.
Qemu committed a patch which list some CPU names in [] when asked for
supported CPUs (qemu -cpu ?). Yet, it needs such CPUs to be passed
without those square braces. When probing for supported CPU models, we
can just strip the square braces and pretend we have never seen them.
First, inital VCPU pinning is set correctly but then it is reset by
assigning qemu process to a new cgroup (which contains all CPUs). It's
easily fixed by swapping these two actions.
An empty root snapshot list was considered as error condition. Creating a
new snapshot would fail if the domain didn't have snapshots yet, because
the snapshot-create function tries to lookup the list of existing snapshots
in order to verify that the snapshot name is unique. This fails if the
domain doesn't have snapshots yet.
Removing the NULL check from esxVI_LookupRootSnapshotTreeList fixes this.
I am moving some of the eb/iptables related functions into the interface
of the firewall driver and am making them only accessible via the driver's
interface. Otherwise exsiting code is adapted where needed. I am adding one
new function to the interface that checks whether the 'basic' rules can be
applied, which will then be used by a subsequent patch.
According to GCC, ATTRIBUTE_UNUSED means that an attribute _might_
be unused, not _must_ be unused. Therefore, it is easier to
blindly mark a variable, than to try and do preprocessor limiting
of when we know it is unused.
* src/remote/remote_driver.c (remoteAuthenticate): Mark attribute
as potentially unused.
Reported by Gustovo Morozowski.
The initial boot of VMs uses -device for NICs where available. The
corresponding monitor command is device_add, but the network hotplug
code was still using device_del by mistake.
* src/qemu/qemu_driver.c: Use device_add for NIC hotplug where
available
If either of the getfd or host_net_add monitor commands return
any text, this indicates an error condition. Don't ignore this!
* src/qemu/qemu_monitor_text.c: Report errors for getfd and
host_net_add
The 'device_del' command expects a parameter called 'id' but we
were passing 'config'.
* src/qemu/qemu_monitor_json.c: Fix device_del command parameter
The idea is that every API implementation in driver which has flags
parameter should first call virCheckFlags() macro to check the function
was called with supported flags:
virCheckFlags(VIR_SUPPORTED_FLAG_1 |
VIR_SUPPORTED_FLAG_2 |
VIR_ANOTHER_SUPPORTED_FLAG, -1);
The error massage which is printed when unsupported flags are passed
looks like:
invalid argument in virFooBar: unsupported flags (0x2)
Where the unsupported flags part only prints those flags which were
passed but are not supported rather than all flags passed.
Based on a warning from coverity. The safe* functions
guarantee complete transactions on success, but don't guarantee
freedom from failure.
* src/util/util.h (saferead, safewrite, safezero): Add
ATTRIBUTE_RETURN_CHECK.
* src/remote/remote_driver.c (remoteIO, remoteIOEventLoop): Ignore
some failures.
(remoteIOReadBuffer): Adjust error messages on read failure.
* daemon/event.c (virEventHandleWakeup): Ignore read failure.
Disk devices in QEMU have two parts, the guest device and the host
backend driver. Historically these two parts have had the same
"unique" name. With the switch to using -device though, they now
have separate names. Thus when changing CDROM media, for guests
using -device syntax, we need to prepend the QEMU_DRIVE_HOST_PREFIX
constant
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add helper function
qemuDeviceDriveHostAlias() for building a host backend alias
* src/qemu/qemu_driver.c: Use qemuDeviceDriveHostAlias() to determine
the host backend alias for performing eject/change commands in the
monitor
The device_add command was added in JSON mode in a way I didn't
expect. Instead of passing the normal device string to the JSON
command:
{ "execute": "device_add", "arguments": { "device": "ne2k_pci,id=nic.1,netdev=net.1" } }
We need to split up the device string into a full JSON object
{ "execute": "device_add", "arguments": { "driver": "ne2k_pci", "id": "nic.1", "netdev": "net.1" } }
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Rename the
qemuCommandLineParseKeywords method to qemuParseKeywords
and export it to monitor
* src/qemu/qemu_monitor_json.c: Split up device string into
a JSON object for device_add command
The parameter for the qemuMonitorDeviceDel() is a device alias,
not a device config string. Rename the parameter reflect this
and avoid confusion to readers.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename devicestr to devalias in qemuMonitorDeviceDel()
The QEMU developers have stated that they will not be porting
the commands 'pci_add', 'pci_del', 'usb_add', 'usb_del' to the
JSON mode monitor, since they're obsoleted by 'device_add'
and 'device_del'. libvirt has (untested) code that would have
supported those commands in theory, but since we already use
device_add/del where available, there's no need to keep the
legacy stuff anymore.
The text mode monitor keeps support for all commands for sake
of historical compatability.
* src/qemu/qemu_monitor_json.c: Remove 'pci_add', 'pci_del',
'usb_add', 'usb_del' commands
The QEMU driver is mistakenly calling directly into the text
mode monitor for the domain memory stats query.
* src/qemu/qemu_driver.c: Replace qemuMonitorTextGetMemoryStats with
qemuMonitorGetMemoryStats
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add the new
wrapper for qemuMonitorGetMemoryStats
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
qemuMonitorJSONGetMemoryStats implementation
Instead of reporting VIR_ERR_INTERNAL_ERROR use the more specific
VIR_ERR_CONFIG_UNSUPPORTED
* src/qemu/qemu_conf.c: Report VIR_ERR_CONFIG_UNSUPPORTED for
unsupported video adapters
To avoid race-conditions, the tear down of a filter has to happen before
the tap interface disappears and another tap interface with the same
name can re-appear. This patch tries to fix this. In one place, where
communication with the qemu monitor may fail, I am only tearing the
filters down after knowing that the function did not fail.
I am also moving the tear down functions into an include file for other
drivers to reuse.
* This patch implements a memory allocator to obtain memory for
structures whose last member is a variable length array. C99 refers
to these variable length objects as structs containing flexible
array members.
* Fixed macro parentheses per Eric Blake
* src/xen/xend_internal.c (xend_parse_sexp_desc_char): Add three
uses of sa_assert, each preceding a strchr(value,... to assure
clang that "value" is non-NULL.
* src/qemu/qemu_driver.c (qemudDomainAttachSCSIDisk):
Initialize "cont" to NULL, so clang knows it's set.
Add an sa_assert so it knows it's non-NULL when dereferenced.
* src/nwfilter/nwfilter_ebiptables_driver.c (ebiptablesApplyNewRules):
Don't dereference a NULL or uninitialized pointer when given
an empty list of rules. Add an sa_assert(inst) in each loop to
tell clang that the uses of "inst[i]" are valid.
Among some here, there is a strong aversion to the use of "assert", yet
some others think it is essential (when applied judiciously) even --
perhaps "especially" -- at the heart of libraries and core hypervisor-
related code.
Here is a compromise that lets us make assertions about the code (e.g.,
to tell static analyzers about invariants) without even a hint of risk
of an abort.
* src/internal.h [STATIC_ANALYSIS]: Include <assert.h>.
(sa_assert): Define. A no-op most of the time, but equivalent
to classical assert when STATIC_ANALYSIS is nonzero.
* src/storage/storage_backend_fs.c (virStorageBackendFileSystemMount):
Clang was not smart enough, and mistakenly reported that "options"
could be used uninitialized. Initialize it.
Somehow the backend of this function was never implemented in
libvirt's netcf driver, and nobody noticed until now. (The required
netcf function was already in place, so nothing needs to change
there.)
* src/interface/netcf_driver.c: add in the backend function, and point
to it from the table of driver functions.
* src/openvz/openvz_driver.c (openvzGetProcessInfo): Reorganize
so that unexpected /proc/vz/vestat content cannot make us use
uninitialized variables. Without this change, an input line with
a matching "readvps", but fewer than 4 numbers would result in our
using at least "systime" uninitialized.
I am getting rid of determining the path to necessary CLI tools at
compile time. Instead, now the firewall driver has an initialization
function that uses virFindFileInPath() to determine the path to
necessary CLI tools and a shutdown function to free allocated memory.
The rest of the patch mostly deals with availability of the CLI tools
and to not call certain code blocks if a tool is not available and that
strings now have to be built slightly differently.
Generate almost all SOAP method mapping code.
Update the driver code to use the complete paramater list of some methods
that had parameters skipped before.
Improve the ESX_VI__METHOD marco to do automatic output deserialization
based on output occurrence. Also incorporate automatic _this binding and
output pointer check.
* src/esx/esx_vmx.c (esxVMX_GatherSCSIControllers): Do not dereference
a NULL disk->driverName. We already detect this condition in another
case. Check for it here, too.
When building libvirt on RHEL-5, I saw this error:
cc1: warnings being treated as errors
openvz/openvz_conf.c: In function 'openvzGetVPSUUID':
openvz/openvz_conf.c:835: warning: 'saveptr' may be used uninitialized in this function
make[3]: *** [libvirt_driver_openvz_la-openvz_conf.lo] Error 1
gcc in RHEL-5 gets upset about this usage of strtok_r (even though
it is perfectly valid). Just set *saveptr to NULL at the
start to quiet it down.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Changes from v1 to v2:
- changed function name prefixes to 'iface' from previous 'Iface'
- Further to make make syntax-check pass:
- indentation fix in interface.h
- added entry to POTFILES.in
I am consolidating network interface related functions used in nwfilter
and macvtap code in utils/interface.c. All function names are prefixed
with 'Iface'. The following functions are now available through
interface.h:
int ifaceCtrl(const char *name, bool up);
int ifaceUp(const char *name);
int ifaceDown(const char *name);
int ifaceCheck(bool reportError, const char *ifname,
const unsigned char *macaddr, int ifindex);
int ifaceGetIndex(bool reportError, const char *ifname, int *ifindex);
I added 'int ifindex' as parameter to ifaceCheck to the original
function and modified the code accordingly.
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
updates for release of 0.8.0
* po/*.po po/libvirt.pot: updated a lar set of localizations, and merge
the messages
I mistakenly took the op field in the DHCP message as the DHCP_OFFER
type. Rather than basing the decision to read the VM's IP address on
that field, process the appended DHCP options where option 53 indicates
the actual type of the packet. I am also reading the broadcast address
of the VM, but don't use it so far.
In a couple of cases typos meant we were firing the wrong type
of event. In the python code my previous commit accidentally
missed some chunks of the code.
* python/libvirt-override-virConnect.py: Add missing python glue
accidentally left out of previous commit
* src/conf/domain_event.c, src/qemu/qemu_monitor_json.c: Fix typos
in event name / method name to invoke
Currently when we attempt to change the cdrom in a qemu VM the monitor
doesn't generate an error if the target filename doesn't exist. I've
submitted a patch[1] for this. This patch is the libvirt qemu-driver
side which catches the error message from the monitor and reportes the
error to libvirt. This means that virsh attach-disk cdrom commands
won't appear to succeed when qemu change command actually failed.
* src/qemu/qemu_monitor_text.c: in qemuMonitorTextChangeMedia() look
for failure to access the new data
Fix invalid code generating in esx_vi_generator.py regarding deep copy
types that contain enum properties.
Add strptime and timegm to bootstrap.conf. Both are used to convert a
xsd:dateTime to calendar time.
Add a testcase of the xsd:dateTime conversion.
The network filter / snapshot / hooks code introduced some
non-portable pices that broke the win32 build
* configure.ac: Check for net/ethernet.h required by nwfile config
parsing code
* src/conf/nwfilter_conf.c: Define ethernet protocol constants
if net/ethernet.h is missing
* src/util/hooks.c: Disable hooks build on Win32 since it lacks
fork/exec/pipe
* src/util/threads-win32.c: Fix unchecked return value
* tools/virsh.c: Disable SIGPIPE on Win32 since it doesn't exist.
Fix non-portable strftime() formats
Changes from V1 to V2 of this patch
- I had reversed the logic thinking that icmp type 0 is a echo
request,but it's reply -- needed to reverse the logic
- Found that ebtables takes the --ip-tos argument only as a hex number
This patch enables the skipping of some of the ICMP traffic rules on the
iptables level under certain circumstances so that the following filter
properly enables unidirectional pings:
<filter name='testcase'>
<uuid>d6b1a2af-def6-2898-9f8d-4a74e3c39558</uuid>
<!-- allow incoming ICMP Echo Request -->
<rule action='accept' direction='in' priority='500'>
<icmp type='8'/>
</rule>
<!-- allow outgoing ICMP Echo Reply -->
<rule action='accept' direction='out' priority='500'>
<icmp type='0'/>
</rule>
<!-- drop all other ICMP traffic -->
<rule action='drop' direction='inout' priority='600'>
<icmp/>
</rule>
</filter>
Extend tests to cover all SCSI controller types and document the
new type.
The lsisas1068 SCSI controller type was added in ESX 4.0. The VMX
parser reports an error when this controller type is present. This
makes virsh dumpxml fail for every domain that uses this controller
type.
This patch fixes this and adds lsisas1068 to the list of accepted
SCSI controller types.
Reported by Jonathan Kelley.
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.
So, when for example an interface description in the domain XML has
looked like this up to now:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'>
<parameter name='IP' value='10.2.3.4'/>
</filterref>
</interface>
you may omit the IP parameter:
<interface type='bridge'>
<source bridge='mybridge'/>
<model type='virtio'/>
<filterref filter='clean-traffic'/>
</interface>
Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.
A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.
* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
src/nwfilter/nwfilter_ebiptables_driver.[ch]
src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
When comparing a CPU to host CPU, the result would be
VIR_CPU_COMPARE_SUPERSET (or even VIR_CPU_COMPARE_INCOMPATIBLE if strict
match was required) even though the two CPUs were identical.
When qemu libvirt driver doesn't support guest CPU selection with given
qemu binary, guests requiring specific CPU should fail to start instead
of being silently supplied with a default CPU.
git grep found 12 of the former but 100 of the latter in src/.
* src/remote/remote_driver.c (initialise_gnutls): Rename...
(initialize_gnutls): ...to this.
(doRemoteOpen): Adjust caller.
* src/xen/xen_driver.c (xenUnifiedOpen): Adjust output string.
* src/util/network.c: Adjust comments.
Suggested by Matthias Bolte.
* src/conf/domain_event.c (virDomainEventGraphicsNewFromDom):
Return NULL when handling out-of-memory error, rather than
falling through with ev=NULL and then assigning to ev->member.
(virDomainEventGraphicsNewFromObj): Likewise.
The attached patch fixes a problem due to the mac match in iptables only
supporting --mac-source and no --mac-destination, thus it not being
symmetric. Therefore a rule like this one
<rule action='drop' direction='out'>
<all match='no' srcmacaddr='$MAC'/>
</rule>
should only have the MAC match on traffic leaving the VM and not test
for the same source MAC address on traffic that the VM receives.
* src/qemu/qemu_driver.c (qemudStartVMDaemon): Initialize "logfile"
to ensure that we don't use it uninitialized -- thus closing an
arbitrary file descriptor -- in the cleanup block.
* src/security/virt-aa-helper.c: adjust virt-aa-helper to handle pci
devices. Update valid_path() to have an override array to check against,
and add "/sys/devices/pci" to it. Then rename file_iterate_cb() to
file_iterate_hostdev_cb() and create file_iterate_pci_cb() based on it
To avoid an error when hitting the <seclabel...> definition
* src/security/virt-aa-helper.c: add VIR_DOMAIN_XML_INACTIVE flag
to virDomainDefParseString
Don't exit with error if the user unloaded the profile outside of
libvirt
* src/security/virt-aa-helper.c: check the exit error from apparmor_parser
before exiting with a failure
The calls to virExec() in security_apparmor.c when
invoking virt-aa-helper use VIR_EXEC_CLEAR_CAPS. When compiled without
libcap-ng, this is not a problem (it's effectively a no-op) but with
libcap-ng this causes MAC_ADMIN to be cleared. MAC_ADMIN is needed by
virt-aa-helper to manipulate apparmor profiles and without it VMs will
not start[1]. This patch calls virExec with the default VIR_EXEC_NONE
instead.
* src/security/security_apparmor.c: fallback to VIR_EXEC_NONE flags for
virExec of virt_aa_helper
Also define ESX_ERROR and ESX_VI_ERROR in a central place, instead of
defining them in each source file.
Add ESX_ERROR and ESX_VI_ERROR to the msg_gen_function list in cfg.mk.
Update po/POTFILES.in accordingly.
With Eric Blake's suggestions applied.
The following rule for direction 'in'
<rule direction='in' action='drop'>
<mac srcmacaddr='1:2:3:4:5:6'/>
</rule>
drops all traffic from the given mac address.
The following rule for direction 'out'
<rule direction='out' action='drop'>
<mac dstmacaddr='1:2:3:4:5:6'/>
</rule>
drops all traffic to the given mac address.
The following rule in direction 'inout'
<rule direction='inout' action='drop'>
<mac srcmacaddr='1:2:3:4:5:6'/>
</rule>
now drops all traffic from and to the given MAC address.
So far it would have dropped traffic from the given MAC address
and outgoing traffic with the given source MAC address, which is not useful
since the packets will always have the VM's MAC address as source
MAC address. The attached patch fixes this.
This is the last bug I currently know of and want to fix.
When starting up qemu VNC autoport guests, we were
only looking through ports 5900 to 6000, meaning we
were limited to 100 total clients. Increase that
limit to 65535 (the last available port), so we can
have up to 59635 VNC autoport guests.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
While playing around with def/newDef with the qemu code,
I noticed that newDef was *always* getting set to a value,
even when I didn't redefine the domain. I think the problem
is the virDomainLoadConfig is always doing virDomainAssignDef
regardless of whether the domain already exists in the hashtable.
In turn, virDomainAssignDef is assigning the definition (which
is actually a duplicate) to newDef. Fix this so that newDef stays
NULL until we actually have a new def.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
values. Rather use the strspn() function. Along with this cleanup the
initialization function for the code that used the regular expression
can also be removed.
The images are saved in /var/lib/libvirt/qemu/save/
and named $domainname.save . The directory is created appropriately
at daemon startup. When a domain is started while a saved image is
available, libvirt will try to load this saved image, and start the
domain as usual in case of failure. In any case the saved image is
discarded once the domain is created.
* src/qemu/qemu_conf.h: adds an extra save path to the driver config
* src/qemu/qemu_driver.c: implement the 3 new operations and handling
of the image directory
* src/remote/remote_protocol.x src/remote/remote_protocol.h
src/remote/remote_protocol.c src/remote/remote_driver.c: add the entry
points in the remote driver
* daemon/remote.c daemon/remote_dispatch_args.h
daemon/remote_dispatch_prototypes.h daemon/remote_dispatch_table.h:
and implement the daemon counterpart
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
- ebtables requires that some of the command line parameters are passed as hex numbers; so have those attributes call a function that prints 16 and 8 bit integers as hex nunbers.
- ip6tables requires '--icmpv6-type' rather than '--icmp-type'
- ebtables complains about protocol identifiers lower than 0x600, so already discard anything lower than 0x600 in the parser
- make the protocol entry types more readable using a #define for its entries
- continue parsing a filtering rule even if a faulty entry is encountered; return an error value at the end and let the caller decide what to do with the rule's object
- fix an error message
The clock timer XML is being updated in the following ways (based on
further off-list discussion that was missed during the initial
implementation):
1) 'wallclock' is changed to 'track', and the possible values are 'boot'
(corresponds to old 'host'), 'guest', and 'wall'.
2) 'mode' has an additional value 'smpsafe'
3) when tickpolicy='catchup', there can be an optional sub-element of
timer called 'catchup':
<catchup threshold=123 slew=120 limit=10000/>
Those three values are all longs, always optional, and if they are present,
they are positive. Internally, 0 indicates "unspecified".
* docs/schemas/domain.rng: updated RNG definition to account for changes
* src/conf/domain_conf.h: change the C struct and enums to match changes.
* src/conf/domain_conf.c: timer parse and format functions changed to
handle the new selections and new element.
* src/libvirt_private.syms: *TimerWallclock* changes to *TimerTrack*
* src/qemu/qemu_conf.c: again, account for Wallclock --> Track change.
(suggested by Daniel Berrange, tested by Dan Kenigsberg)
virStorageFileGetMetadata will fail for disk images that are stored on
a root-squash NFS share that isn't world-readable.
SELinuxSetSecurityImageLabel is called during the startup of every
domain (as long as security_driver != "none"), and it will propogate
the error from virStorageFileGetMetadata, causing the domain startup
to fail. This is, however, a common scenario when qemu is run as a
non-root user and the disk image is stored on NFS.
Ignoring this failure (which doesn't matter in this case, since the
next thing done by SELinuxSetSecurityImageLabel - setting the file
context - will also fail (and that function already ignores failures
due to root-squash NFS) will allow us to continue bringing up the
domain. The result is that we don't need to disable the entire
security driver just because a domain's disk image is stored on
root-squashed NFS.
virFileReadLimFD is a poor fit for reading the header
of the restore file. The problem is that virFileReadLimFD
returns an error when there is more data after the amount
you ask to read, but that is *expected* in this case.
This patch is essentially a revert of
1a4d5c9543, but I don't think
that commit does what it says anyway. It purports to prevent
an unwarranted OOM error, but since virFileReadLimFD will
allocate memory up to the maximum anyway, the upper limit
on the total amount of memory allocated is the same for either
the old version or the new version. Since the old saferead
actually works and virFileReadLimFD does not, revert to
using saferead.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Received report of user crashing libvirtd with
virsh capabilities > capabilities.xml
virsh cpu-compare capabilities.xml
While user has been informed about proper usage of cpu-compare,
segfaulting libvirt should be avoided.
Do not parse CPU definition in virCPUDefParseXML() if XML is not
a 'cpu' node.
When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:
VIR_DOMAIN_EVENT_SUSPENDED
with a detail being one of:
VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG
To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event
* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name
This also fixes a problem with MinGW's GCC on Windows. GCC complains
about the L modifier being unknown.
Parsing in pciIterDevices is stricter now and doesn't accept trailing
characters after the actual <domain>:<bus>:<slot>.<function> sequence
anymore.
Parsing in pciWaitForDeviceCleanup is also stricter now and expects
the <start>-<end> : <domain>:<bus>:<slot>.<function> sequence to be
terminated by \n.
Change domain from unsigned long long to unsigned int in
pciWaitForDeviceCleanup, because everywhere else domain is handled as
unsigned int too.
Parsing is stricter now and doesn't accept trailing characters
after the actual value or non-number strings anymore. atoi just
returns 0 in case it cannot parse a number from the given string.
Now an error is reported for such a string.
The switch from %lli to %lld in virCgroupGetValueI64 is intended,
as virCgroupGetValueU64 uses base 10 too, and virCgroupSetValueI64
uses %lld to format the number to string.
Parsing is stricter now and doesn't accept trailing characters
after the actual value anymore.
virParseVersionString uses virStrToLong_ui instead of sscanf.
This also fixes a bug in the UML driver, that always returned 0
as version number.
Introduce STRSKIP to check if a string has a certain prefix and
to skip this prefix.
found some cases where the output ended up not looking as expected. So
the following changes are in the patch below:
- if the protocol ID in the MAC header is an integer, just write it into
the datastructure without trying to find a corresponding string for it
and if none is found failing
- when writing the protocol ID as string, simply write it as integer if
no corresponding string can be found
- same changes for arpOpcode parsing and printing
- same changes for protocol ID in an IP packet
- DSCP value needs to be written into the data structure
- IP protocol version number is redundant at this level, so remove it
- parse the protocol ID found inside an IP packet not only as string but
also as uint8
- arrange the display of the src and destination masks to be shown after
the src and destination ip address respectively in the XML
- the existing libvirt IP address parser accepts for example '25' as an
IP address. I want this to be parsed as a CIDR type netmask. So try to
parse it as an integer first (CIDR netmask) and if that doesn't work as
a dotted IP address style netmask.
- instantiation of rules with MAC masks didn't work because they weren't
printed into a buffer, yet.
domain_conf.c:494: undefined reference to 'virNWFilterHashTableFree'
domain_conf.c:5107: undefined reference to 'virNWFilterFormatParamAttributes'
Add missing source to the proxy and disable XML parsing code in
nwfilter_params.c for a proxy build.
virStrToLong* guarantees (via strtol) that the end pointer will be set
to the point at which parsing stopped (even on failure, this point is
the start of the input string).
* src/esx/esx_driver.c (esxGetVersion): Remove pointless
conditional.
* src/qemu/qemu_conf.c (qemuParseCommandLinePCI)
(qemuParseCommandLineUSB, qemuParseCommandLineSmp): Likewise.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetMigrationStatus): Likewise.
Check that interface names only contain valid characters. Blank them out
otherwise.
Valid characters in this code are currently a-z,A-Z,0-9, '-' and '_'.
The Python script generates the mappings based on the type descriptions
in the esx_vi_generator.input file.
This also improves the inheritance handling and allows to get rid of the
ugly, inflexible, and error prone _base/_super approach. Now every struct
that represents a SOAP type contains a _type member, that allows to
recreate C++-like dynamic dispatch for "method" calls in C.
* src/Makefile.am: adds a few missing header files in the associated
file variables, it's needed otherwise the missing headers breaks
compilation from a distribution tarball
This patch changes the network filtering code to use libvirt's existing
IPv4 and IPv6 address parsers/printers rather than my self-written ones.
I am introducing a new function in network.c that counts the number of
bits in a netmask and ensures that the given address is indeed a netmask,
return -1 on error or values of 0-32 for IPv4 addresses and 0-128 for
IPv6 addresses. I then based the function checking for valid netmask
on invoking this function.
This patch adds IPv6 filtering support for the following protocols:
- tcp-ipv6
- udp-ipv6
- udplite-ipv6
- esp-ipv6
- ah-ipv6
- sctp-ipv6
- all-ipv6
- icmpv6
Many of the IPv4 data structure could be re-used for IPv6 support.
Since ip6tables also supports pretty much the same command line parameters
as iptables does, also much of the code could be re-used and now
command lines are invoked with the ip(6)tables tool parameter passed
through the functions as a parameter.
This patch removes the driver dependency from nwfilter_conf.c and moves
a callback function calling into the driver into
nwfilter_gentech_driver.c and passes a pointer to that callback function
upon initialization of nwfilter_conf.c.
Since the timers are defined to cover all possible config cases for
several different hypervisors, many of these possibilities generate an
error on qemu. Here is what is currently supported:
RTC: If the -rtc commandline option is available, allow setting
"clock=host"
or "clock=vm" based on the rtc timer clock='host|guest' value. Also
add "driftfix=slew" if the tickpolicy is 'catchup', or add nothing
if
tickpolicy is 'delay'. (Other tickpolicies will raise an error).
If -rtc isn't available, but -rtc-td-hack is, add that option
if the tickpolicy is 'catchup', add -rtc-td-hack, if it is 'delay'
add nothing, and if it's anything else, raise an error.
PIT: If -no-kvm-pit-reinjection is available, and tickpolicy is
'delay', add that option. if tickpolicy is 'catchup', do
nothing. Anything else --> raise an error.
If -no-kvm-pit-reinjection *isn't* available, but -tdf is, when
tickpolicy is 'catchup' add -tdf. If it's 'delay', do
nothing. Anything else --> raise an error.
If neither of those commandline options is available, and
tickpolicy is anything other than 'delay' (or unspecified), raise
an error.
HPET: If -no-hpet flag is available and present='no', add -no-hpet.
If -no-hpet is not available, and present='yes', raise an error.
If present is unspecified, the default is to do whatever this
particular qemu does by default, so don't raise an error.
All other timer types are unsupported by QEMU, so they will raise an
error.
* src/qemu/qemu_conf.c: extend qemuBuildClockArgStr() to generate the
command line arguments for the new options
* src/qemu/qemu_conf.h: define 4 new flags
* src/qemu/qemu_conf.c: check the help text of qemu for presence of
features indicated by each flag.
* tests/qemuhelptest.c: add appropriate flags into the masks for each test
This extension is described in
http://www.redhat.com/archives/libvir-list/2010-March/msg00304.html
Currently all attributes are optional, except name.
* src/conf/domain_conf.h: add data definition for virDomainTimerDef
and add a list of them to virDomainClockDef
* src/conf/domain_conf.c: XML parser and formatter for a timer inside a clock
* src/libvirt_private.syms: add new Timer enum helper functions to symbols
The QEMU cpu affinity is used in NUMA scenarios to ensure that
guest memory is allocated from a specific node. Normally memory
is allocate on demand in vCPU threads, but when using hugepages
the initial thread leader allocates memory upfront. libvirt was
not setting affinity of the thread leader, or I/O threads. This
patch changes the code to set the process affinity in between
the fork()/exec() of QEMU. This ensures that every single QEMU
thread gets the affinity
* src/qemu/qemu_driver.c: Set affinity on entire QEMU process
at startup
This patch fixes the 'make check' runs for me which, under certain
circumstances and login configurations, did invoke popups requesting
authentication. I removed the parameter conn from being passed into the
error reporting function.
* src/conf/nwfilter_conf.h src/conf/nwfilter_conf.c: remove conn from
error reporting parameters.
Right now this implements only 2 basic hooks:
- before the lxc control process is being launched
- after the lxc control process is terminated
the XML description of the domain is passed to the hook script stdin
/etc/libvirt/hook/lxc
* src/lxc/lxc_driver.c: implement synchronous script hooks for LXC
at domain startup and end
Right now this implements only 2 basic hooks:
- before the qemu process is being launched
- after the qemu process is terminated
the XML description of the domain is passed to the hook script stdin
/etc/libvirt/hook/qemu
* src/qemu/qemu_driver.c: implement synchronous script hooks for QEmu
at domain startup and end
This exports 3 basic routines:
- virHookInitialize() initializing the hook support by looking for
scripts availability
- virHookPresent() used to test if there is a hook for a given driver
- virHookCall() which actually calls a synchronous script hook with
the needed parameters
Note that this doesn't expose any public API except for the locations
and arguments passed to the scripts
* src/Makefile.am: add the 2 new files
* src/util/hooks.h src/util/hooks.c: implements the 3 functions
* src/libvirt_private.syms: export the 3 symbols internally
* po/POTFILES.in: add src/util/hooks.c to translatables modules
used to read the data from virExec stdout/err file descriptors
* src/util/util.c src/util/util.h: not static anymore and export it
* src/libvirt_private.syms: allow access internally
This flag is used in migration prepare step to send updated XML
definition of a guest.
Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
Useful mainly for migration. cpuUpdate changes guest CPU requirements in
the following way:
- match == "strict" || match == "exact"
- optional features which are supported by host CPU are changed into
required features
- optional features which are not supported by host CPU are disabled
- all other features remain untouched
- match == "minimum"
- match is changed into "exact"
- optional features and all features not mentioned in guest CPU
specification which are supported by host CPU become required
features
- other optional features are disabled
- all other features remain untouched
This ensures that no feature will suddenly disappear from the guest
after migration.
When a domain is defined on host1, migrated to host2 and then migrated
back to host1, its current configuration would overwrite the libvirtd's
in-memory copy of persistent configuration of that domain. This is not
desired as we want to preserve the persistent configuration untouched.
This patch introduces new 'live' parameter to virDomainAssignDef.
Passing 'true' for 'live' means the configuration passed to
virDomainAssignDef describes a configuration of live instance of the
domain. This applies for saved domains which are being restored or for
incoming domains during migration.
All callers have been changed to pass the appropriate value.
