For most services, the value provided explicitly matches the
documented default.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
When using nbdkit to serve a network disk source, the nbdkit process
will start and wait for an nbd connection before actually attempting to
connect to the (remote) disk location. Because of this, nbdkit will not
report an error until after qemu is launched and tries to read from the
disk. This results in a fairly user-unfriendly error saying that qemu
was unable to start because "Requested export not available".
Ideally we'd like to be able to tell the user *why* the export is not
available, but this sort of information is only available to nbdkit, not
qemu. It could be because the url was incorrect, or because of an
authentication failure, or one of many other possibilities.
To make this friendlier for users and easier to detect
misconfigurations, try to connect to nbdkit immediately after starting
nbdkit and before we try to start qemu. This requires adding a
dependency on libnbd. If an error occurs when connecting to nbdkit, read
back from the nbdkit error log and provide that information in the error
report from qemuNbdkitProcessStart().
User-visible change demonstrated below:
Previous error:
$ virsh start nbdkit-test
2023-01-18 19:47:45.778+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
error: Failed to start domain 'nbdkit-test'
error: internal error: process exited while connecting to monitor: 2023-01-18T19:47:45.704658Z
qemu-system-x86_64: -blockdev {"driver":"nbd","server":{"type":"unix",
"path":"/var/lib/libvirt/qemu/domain-1-nbdkit-test/nbdkit-libvirt-1-storage.socket"},
"node-name":"libvirt-1-storage","auto-read-only":true,"discard":"unmap"}: Requested export not
available
After this change:
$ virsh start nbdkit-test
2023-01-18 19:44:36.242+0000: 30895: error : virNetClientProgramDispatchError:172 : internal
error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso': nbdkit: curl[1]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
error: Failed to start domain 'nbdkit-test'
error: internal error: Failed to connect to nbdkit for 'http://localhost:8888/nonexistent.iso]:
error: problem doing HEAD request to fetch size of URL [http://localhost:8888/nonexistent.iso]:
HTTP response code said error: The requested URL returned error: 404
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow us to use it for nbdkit logging in upcoming commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In future commits, we will optionally use nbdkit to serve some remote
disk sources. This patch queries to see whether nbdkit is installed on
the host and queries it for capabilities. The data will be used in later
commits.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This consists of (1) adding the necessary args to the qemu commandline
netdev option, and (2) starting a passt process prior to starting
qemu, and making sure that it is terminated when it's no longer
needed. Under normal circumstances, passt will terminate itself as
soon as qemu closes its socket, but in case of some error where qemu
is never started, or fails to startup completely, we need to terminate
passt manually.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The default values used by the library are determined at configure
time based on a number of factors, and we should reflect them in
the installed configuration file to make the comments it contains
more useful.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/263
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The existing helpers we have are very clumsy and there's no integration
with the monitor.
This patch introduces new helpers to bridge the gap and simplify handing
of fdsets and classic FD passing when generating commandline/hotplug
arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We recently started listing these in the spec file and, since we
were not creating them during the installation phase, that broke
RPM builds.
Fixes: 4b43da0bff
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Userfaultfd is by default allowed only for privileged processes. Since
libvirt runs QEMU unprivileged, we need to enable unprivileged access to
userfaultfd to enable post-copy migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1945420
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'conflict' key in a virt_daemon_unit dictionary is not used when
generating systemd service and socket files. The comment associated
with the key claims the default is 'true', and a few build files
needlessly set it to 'true' when defining their virt_daemon_unit.
Remove the 'conflict' key and its use in the affect build files.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dtrace invokes the C compiler, so when cross-building we need
to make sure that $CC is set in the environment and that it
points to the cross-compiler rather than the native one.
Until https://github.com/mesonbuild/meson/issues/266
is addressed, the workaround is to call dtrace via env(1).
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=980334
Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using .path() for an argument to a python script meson will not
setup dependancies on the file. This means that changes to the generator
script will not trigger a rebiuld
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We've dumped all the snapshot helpers and related code into
qemu_driver.c. It accounted for ~10% of overal size of qemu_driver.c.
Separate the code to qemu_snapshot.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's a lot of helper code related to the save image handling. Extract
it to qemu_saveimage.c/h.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Most of our augeas files are generated during meson setup into build
directory and we were running augeas tests only for these files.
However, we have some other augeas and config files that are not
modified during meson setup and they are only in source directories.
In order to run tests for these files we need to provide different path
to both source and build directories.
Reported-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The qemu_domain.c file is big as is and we should split it into
separate semantic blocks. Start with code that handles domain
namespaces.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
-export-dynamic is provided by src_dep
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
