For non-local storage drivers we can't expect to use the "scrub" tool to
wipe the volume. Split the code into a separate backend function so that
we can add protocol specific code later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1118710
For non-local storage drivers we can't expect to use the FDStream
backend for up/downloading volumes. Split the code into a separate
backend function so that we can add protocol specific code later.
Replace the authType, chap, and cephx unions in virStoragePoolSource
with a single pointer to a virStorageAuthDefPtr. Adjust all users of
the previous chap/cephx and secret unions with the source->auth data.
More instances of failure to report (unlikely) readdir errors.
In one case, I chose to ignore them, given that a readdir error
would be no different than timing out on the loop, where the
fallback path behaves correctly either way.
* src/storage/storage_backend.c (virStorageBackendStablePath):
Ignore readdir errors.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemRefresh): Report readdir errors.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIGetHostNumber): Likewise.
* src/storage/storage_backend_scsi.c (getNewStyleBlockDevice)
(getBlockDevice, virStorageBackendSCSIFindLUs): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
virStorageBackendISCSISession only needs the path of the source
device and virStorageBackendISCSIRescanLUNs doesn't need the pool
at all.
This will allow the functions to be moved to src/util.
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Each of the modules handled reporting error messages from the secret fetching
slightly differently with respect to the error. Provide a similar message
for each error case and provide as much data as possible.
Although the XML for CHAP authentication with plain "password"
was introduced long ago, the function was never implemented. This
patch replaces the login/password mechanism by following the
'ceph' (or RBD) model of using a 'username' with a 'secret' which
has the authentication information.
This patch performs the authentication during startPool() processing
of pools with an authType of VIR_STORAGE_POOL_AUTH_CHAP specified
for iSCSI pools.
There are two types of CHAP configurations supported for iSCSI
authentication:
* Initiator Authentication
Forward, one-way; The initiator is authenticated by the target.
* Target Authentication
Reverse, Bi-directional, mutual, two-way; The target is authenticated
by the initiator; This method also requires Initiator Authentication
This only supports the "Initiator Authentication". (I don't have any
enterprise iSCSI env for testing, only have a iSCSI target setup with
tgtd, which doesn't support "Target Authentication").
"Discovery authentication" is not supported by tgt yet too. So this only
setup the session authentication by executing 3 iscsiadm commands, E.g:
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.authmethod" -v "CHAP" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.username" -v "Jim" --op update
% iscsiadm -m node --target "iqn.2013-05.test:iscsi.foo" --name \
"node.session.auth.password" -v "Jimsecret" --op update
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
iscsiadm now supports specifying hostnames in the portal argument [1]
Instead of resolving the hostname to a single IPv4 address, pass the
hostname to isciadm, allowing IPv6 targets to work.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=624437
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
The option 'srcSpec' to virsh command find-storage-pool-sources
is optional for logical type of storage pool, but mandatory for
netfs and iscsi type.
When missing the option for netfs and iscsi, libvirt reports XML
parsing error due to null string option srcSpec.
before
error: Failed to find any netfs pool sources
error: (storage_source_specification):1: Document is empty
(null)
after:
error: pool type 'iscsi' requires option --srcSpec for source discovery
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Update the storage driver to use virReportError instead of
the virStorageReportError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to dynamically change the command line ARGV,
switch all storage code over to use virCommandPtr APIs for
running programs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous storage patch missed an instance affected by the struct
member rename. It also had some botched whitespace detected by
'make check'.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Adjust to new struct.
* src/conf/storage_conf.c (virStoragePoolSourceFormat): Fix
indentation.
The current storage pools for NFS and iSCSI only require one host to
connect to. Future storage pools like RBD and Sheepdog will require
multiple hosts.
This patch allows multiple source hosts and rewrites the current
storage drivers.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The old virRandom() API was not generating good random numbers.
Replace it with a new API virRandomBits which instead of being
told the upper limit, gets told the number of bits of randomness
required.
* src/util/virrandom.c, src/util/virrandom.h: Add virRandomBits,
and move virRandomInitialize
* src/util/util.h, src/util/util.c: Delete virRandom and
virRandomInitialize
* src/libvirt.c, src/security/security_selinux.c,
src/test/test_driver.c, src/util/iohelper.c: Update for
changes from virRandom to virRandomBits
* src/storage/storage_backend_iscsi.c: Remove bogus call
to virRandomInitialize & convert to virRandomBits
Splitting into two functions allows the user to call the right
function, rather than having to remember that a *Free function is
an exception to the rule.
* src/conf/storage_conf.h (virStoragePoolSourceClear): New function.
* src/libvirt_private.syms (storage_conf.h): Export it.
* src/conf/storage_conf.c (virStoragePoolSourceFree): Split...
(virStoragePoolSourceClear): ...into new function.
(virStoragePoolDefFree, virStoragePoolDefParseSourceString):
Update callers.
* src/test/test_driver.c (testStorageFindPoolSources): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemNetFindPoolSourcesFunc)
(virStorageBackendFileSystemNetFindPoolSources): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Likewise.
* src/storage/storage_backend_logical.c
(virStorageBackendLogicalFindPoolSources): Likewise.
Detected by Coverity. virStoragePoolSourceFree does not free the
actual passed-in pointer. A bigger patch would be to rename it
virStoragePoolSourceClear to match behavior, or even split it into
two functions depending on needed behavior; but this is the minimal
fix to the one location out of eight that leaked memory.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSIFindPoolSources): Free memory.
If the regexes supported (?:pvs)?, then we could handle this by
optionally matching but not returning the initial command name. But it
doesn't. So add a new char* argument to
virStorageBackendRunProgRegex(). If that argument is NULL then we act
as usual. Otherwise, if the string at that argument is found at the
start of a returned line, we drop that before running the regex.
With this patch, virt-manager shows me lvs with command_names 1 or 0.
The definitions of PVS_BASE etc may want to be moved into the configure
scripts (though given how PVS is found, IIUC that could only happen if
pvs was a link to pvs_real), but in any case no sense dealing with that
until we're sure this is an ok way to handle it.
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity detected that we could crash on bogus input. Meanwhile,
strtok_r is rather heavy compared to strchr.
* src/storage/storage_backend_iscsi.c (virStorageBackendIQNFound):
Check for parse failure, and use lighter-weight functions.
