Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Create a sorted array of virtio-serial controllers.
Each of the elements contains the controller index
and a bitmap of available ports.
Buses are not tracked, because they aren't supported by QEMU.
If the call to virStorageBackendISCSIGetHostNumber failed, we set
retval = -1, but yet still called virStorageBackendSCSIFindLUs.
Need to add a goto cleanup - while at it, adjust the logic to
initialize retval to -1 and only changed to 0 (zero) on success.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Don't supercede the error message virStorageBackendSCSIFindLUs as the
message such as "error: Failed to find LUs on host 60: ..." is not overly
clear as to what the real problem might be.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Make XML definition saving more generic by moving the common code into
virStoragePoolSaveXML and leave case specific code to
PoolSave{Status,Config,...} functions.
In order to be able to use 'checkPool' inside functions which do not
have any connection reference, 'conn' attribute needs to be discarded
from the checkPool's signature, since it's not used by any storage backend
anyway.
https://bugzilla.redhat.com/show_bug.cgi?id=1206479
As described in virDomainBlockCopy() parameters description, the
VIR_DOMAIN_BLOCK_COPY_GRANULARITY parameter may require the value to
have some specific attributes (e.g. be a power of two or fall within a
certain range). And in qemu, a power of two is required. However, our
code does not check that and let qemu operation fail. Moreover, the
virsh man page is not as exact as it could be in this respect.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 7c3c7f217e and f5c2d6 commits introduced a nodeinfo test.
In order to do that, some parts of sysfs had to be copied.
However, sysfs is full of symlinks, so during copying some
symlinks broke. Remove them, as on different systems they can
point to different files or be broken. At the same time, we don't
need all files added in those commits. For instance we don't care
about 'uevent' files, 'power' folders, and others.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When we shutdown/reboot a guest using agent-mode, if the guest itself blocks infinitely,
libvirt would block in qemuAgentShutdown() forever.
Thus, we set a timeout for shutdown/reboot, from our experience, 60 seconds would be fine.
Signed-off-by: Zhang Bo <oscar.zhangbo@huawei.com>
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
virDomainHasDiskMirror() currently detects only jobs that add the mirror
elements. Since some operations like migration are interlocked by
existing block jobs on the given domain the check needs to be
instrumented to check regular jobs too.
This patch renames virDomainHasDiskMirror to virDomainHasDiskBlockjob
and adds an argument that allows to select that it returns true only for
block copy jobs as those interlock making the domain persistent.
Other two uses trigger on any block job type.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If any disk of a VM was involved in a (copy) block job we refused to do
a snapshot. As not only copy jobs interlock snapshots and the
interlocking is applicable to individual disks only we can make the
check in a more individual fashion and interlock all block job types
supported by libvirt.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1203628
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
Two places would call to qemuPrepareCpumap() with priv->autoNodeset to
convert it to a cpuset. Remove the function and use the prepared cpuset
automatically.
When the default cpuset or automatic numa placement is used libvirt
would place the whole parent cgroup in the specified cpuset. This then
disallowed to re-pin the vcpus to a different cpu.
This patch pins only the vcpu threads to the default cpuset and thus
allows to re-pin them later.
The following config would fail to start:
<domain type='kvm'>
...
<vcpu placement='static' cpuset='0-1' current='2'>4</vcpu>
<cputune>
<vcpupin vcpu='0' cpuset='2-3'/>
...
This is a regression since a39f69d2b.
When the synchronous pivot option is selected, libvirt would not update
the backing chain until the job was exitted. Some applications then
received invalid data as their job serialized first.
This patch removes polling to wait for the ABORT/PIVOT job completion
and replaces it with a condition. If a synchronous operation is
requested the update of the XML is executed in the job of the caller of
the synchronous request. Otherwise the monitor event callback uses a
separate worker to update the backing chain with a new job.
This is a regression since 1a92c71910
When the ABORT job is finished synchronously you get the following call
stack:
#0 qemuBlockJobEventProcess
#1 qemuDomainBlockJobImpl
#2 qemuDomainBlockJobAbort
#3 virDomainBlockJobAbort
While previously or while using the _ASYNC flag you'd get:
#0 qemuBlockJobEventProcess
#1 processBlockJobEvent
#2 qemuProcessEventHandler
#3 virThreadPoolWorker
Later on I'll be adding a condition that will allow to synchronise a
SYNC block job abort. The approach will require this code to be called
from two different places so it has to be extracted into a helper.
Commit 1a92c719 moved code to handle block job events to a different
function that is executed in a separate thread. The caller of
processBlockJob handles locking and unlocking of @vm, so the we should
not do it in the function itself.
The block copy API takes the speed in bytes/s rather than MiB/s that was
the prior approach in virDomainBlockRebase. We correctly converted the
speed to bytes/s in the old API but we still called the common helper
virDomainBlockCopyCommon with the unadjusted variable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1207122
The overflow check for the bandwidth parameter did not jump to the
cleanup label.
Additionally virsh should use vshError instead of virReportError.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1206987
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When getting info on NUMA parameters for domain,
virCgroupGetCpusetMems() may be called. However, as of 43b67f2e
the call is guarded by check if memory controller is present.
Even though it may be not obvious instantly, NUMA parameters are
stored under cpuset controller. Therefore the check needs to look
like this:
if (!virCgroupHasController(priv->cgroup,
VIR_CGROUP_CONTROLLER_CPUSET) ||
virCgroupGetCpusetMems(priv->cgroup, &nodeset) < 0) {
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Throughout our code, the virCgroupController enum is used in two ways.
First as an index to an array of cgroup controllers:
struct virCgroup {
char *path;
struct virCgroupController controllers[VIR_CGROUP_CONTROLLER_LAST];
};
Second way is that when calling virCgroupNew() a bitmask of the enum
items can be passed to selectively detect only some controllers. For
instance:
int
virCgroupNewVcpu(virCgroupPtr domain,
int vcpuid,
bool create,
virCgroupPtr *group)
{
...
controllers = ((1 << VIR_CGROUP_CONTROLLER_CPU) |
(1 << VIR_CGROUP_CONTROLLER_CPUACCT) |
(1 << VIR_CGROUP_CONTROLLER_CPUSET));
if (virCgroupNew(-1, name, domain, controllers, group) < 0)
goto cleanup;
}
Even though it's highly unlikely that so many new controllers will be
invented so that we would overflow when constructing the bitmask, it
doesn't hurt to check at compile time either.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When creating new internal representation of cgroups, all passed
arguments are logged. Well, except for two: pid and pointer for
return value. Lets log them too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function has no argument named @name rather than @path
instead. The comment is, however, referring to @name while it
should have been referring to @path really.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 2f36e6944 (re-)introduced a use of an identifier 'interface',
which causes this build failure on mingw:
../../tools/virsh-domain-monitor.c: In function 'cmdDomIfAddr':
../../tools/virsh-domain-monitor.c:2233:17: error: expected identifier or '(' before 'struct'
const char *interface = NULL;
^
See also commit 6512c8b. Sadly, I'm not quite sure how to write a
syntax check that can poison the use of this identifier.
* tools/virsh-domain-monitor.c (cmdDomIfAddr): Use ifacestr instead.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit id '2dbfa716' exposed virCgroupDetectMountsFromFile, but did not
add the corresponding entry in the "#else /* !VIR_CGROUP_SUPPORTED */"
section of the module.
Commit id 'ba1dfc5' added virCgroupSetCpusetMemoryMigrate and
virCgroupGetCpusetMemoryMigrate, but did not add the corresponding
entry points into the "#else /* !VIR_CGROUP_SUPPORTED */" section
We need to mock virFileExists to return true for "/dev/kvm" because the
test should not depend on host system.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commint 0473b45cc introduced new function virNetlinkDelLink, but in
it's counterpart for non-linux platform there should be ATTRIBUTE_UNUSED
instead of ATTRIBUTE_UNSUPPORTED.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>