In recent commits migration of TPM on shared storage was
introduced. However, I've only complied it with gcc and thus did
not notice that clang build fails due to missing break; at the
end of some (empty) cases in switch() statements.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Never remove the TPM state on outgoing migration if the storage setup
has shared storage for the TPM state files. Also, do not do the security
cleanup on outgoing migration if shared storage is detected.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using shared storage there is no need to apply security labels on the
storage since the files have to have been labeled already on the source
side and we must assume that the source and destination side have been
setup to use the same uid and gid for running swtpm as well as share the
same security labels. Whether the security labels can be used at all
depends on the shared storage and whether and how it supports them.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pass the --migration option to swtpm if swptm supports it (starting
with v0.8) and if the TPM's state is written on shared storage. If this
is the case apply the 'release-lock-outgoing' parameter with this
option and apply the 'incoming' parameter for incoming migration so that
swtpm releases the file lock on the source side when the state is migrated
and locks the file on the destination side when the state is received.
If a started swtpm instance is running with the necessary options of
migrating with share storage then remember this with a flag in the
virDomainTPMPrivateDef.
Report an error if swtpm does not support the --migration option and an
incoming migration across shared storage is requested.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for storing private TPM-related data. The first private data
will be related to the capability of the started swtpm indicating whether
it is capable of migration with a shared storage setup since that requires
support for certain command line flags that were only becoming available
in v0.8.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Do not create storage if the TPM state files are on shared storage and
there's an incoming migration since in this case the storage directory
must already exist. Also do not run swtpm_setup in this case.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
New qemuTPMHasSharedStorage() function is introduced which
returns whether the swtpm state directory is on a shared
filesystem (e.g. NFS).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add support for parsing swtpm 'cmdarg-migration' capability (since v0.8).
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This makes the naming more consistent beween the two scripts
synching the feature list and the model list.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This script is intended to help in synchronizing i386 QEMU cpu
feature definitions with libvirt.
QEMU's attribute list for the "max-x86_64-cpu" contains non-cpu-feature
items and needs to be filtered before being useful.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
A later patch will add alias names to the feature map. They will be used
in virQEMUCapsCPUFeatureTranslate and for synchronizing the list with QEMU.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
cpu-data.py assumes that all "feature" nodes have exactly one child.
This assumption will no longer be true when the cpumap includes alias-
names for features.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.7.0-rc0~32^2~5 the .write-cache
attribute of virtio-blk dvice is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
The change in some .args is justified, because the qemuxml2argvdatatest
runs these test caseses with very minimalistic set of capabilities,
that's nowhere near real life scenario.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.9.0-rc0~48^2~25 the .share-rw
attribute of virtio-blk device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
The change in controller-order.args is justified, because the
qemuxml2argvdatatest runs the test case with very minimalistic
set of capabilities, that's nowhere near real life scenario.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.7.0-rc0~83^2 the .num-queues
attribute of virtio-blk device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v0.13.0-rc0~1072 the
.logical_block_size attribute of virtio-blk device is always
available for all QEMU versions we support (4.2.0, currently).
Therefore, we can assume the capability is always set and thus
doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v4.2.0-rc0~23^2~4 the .failover
attribute of virtio-net device is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
