This function does the source part of NBD magic. It
invokes drive-mirror on each non shared and RW disk with
a source and wait till the mirroring process completes.
When it does we can proceed with migration.
Currently, an active waiting is done: every 500ms libvirt
asks qemu if block-job is finished or not. However, once
the job finishes, qemu doesn't report its progress so we
can only assume if the job finished successfully or not.
The better solution would be to listen to the event which
is sent as soon as the job finishes. The event does
contain the result of job.
We need to start NBD server and feed it with all non-<shared/>,
RW and source-full disks. Moreover, with new virPortAllocator we
must ensure the borrowed port for NBD server will be returned if
either migration completes or qemu process is torn down.
This will be used with new migration scheme.
This patch creates basically just monitor stub
functions. Wiring them into something useful
is done in later patches.
This will be used with new migration scheme.
This patch creates basically just monitor stub
functions. Wiring them into something useful
is done in later patches.
This migration cookie is meant for two purposes. The first is to be sent
in begin phase from source to destination to let it know we support new
implementation of VIR_MIGRATE_NON_SHARED_{DISK,INC} so destination can
start NBD server. Then, the second purpose is, destination can let us
know, on which port the NBD server is running.
As a side effect, this also fixes reporting disk migration process.
It was added to memory migration progress, which was wrong. Disk
progress has dedicated fields in virDomainJobInfo structure.
https://bugzilla.redhat.com/show_bug.cgi?id=896685 points out
a regression caused by commit 38c4a9c - libvirt only labels
the backing chain if the backing chain cache is populated, but
the code to populate the cache was only conditionally performed
if cgroup labeling was necessary.
* src/qemu/qemu_cgroup.c (qemuSetupCgroup): Hoist cache setup...
* src/qemu/qemu_process.c (qemuProcessStart): ...earlier into
caller, where it is now unconditional.
To avoid having to hold the qemu driver lock while iterating through
close callbacks and calling them. This fixes a real deadlock when a
domain which is being migrated from another host gets autodestoyed as a
result of broken connection to the other host.
The max value of number of cpus to compute(id) should not
be equal or greater than max cpu number.
The bug ocurrs when id value is equal to max cpu number which
leads to the off-by-one error in the following for loop.
# virsh cpu-stats guest --start 1
error: Failed to virDomainGetCPUStats()
error: internal error cpuacct parse error
Currently, if lzop decompression binary produces a warning, it
doesn't exit with zero status but 2 instead. Terrifying, but
true. However, warnings may be ignored using '--ignore-warn'
command line argument. Moreover, in which case, the exit status
will be zero.
For both AttachDevice and UpdateDevice APIs, if the disk device
is 'cdrom' or 'floppy', the operations could be ejecting, updating,
and inserting. For either ejecting or updating, the shared disk
entry of the original disk src has to be removed, because it's
not useful anymore.
And since the original disk def will be changed, new disk def passed
as argument will be free'ed in qemuDomainChangeEjectableMedia, so
we need to copy the orignal disk def before
qemuDomainChangeEjectableMedia, to use it for qemuRemoveSharedDisk.
The disk def could be free'ed by qemuDomainChangeEjectableMedia,
which can thus cause crash if we reference the disk pointer. On
the other hand, we have to remove the added shared disk entry from
the table on error codepath.
The hash entry is changed from "ref" to {ref, @domains}. With this, the
caller can simply call qemuRemoveSharedDisk, without afraid of removing
the entry belongs to other domains. qemuProcessStart will obviously
benifit from it on error codepath (which calls qemuProcessStop to do
the cleanup).
Based on moving various checking into qemuAddSharedDisk, this
avoids the caller using it in wrong ways. Also this adds two
new checking for qemuCheckSharedDisk (disk device not 'lun'
and kernel doesn't support unpriv_sgio simply returns 0).
Due to "feature"/"features" nasty typo, any features marked as mandatory
by one side of a migration are silently considered optional by the other
side. The following is the code that formats mandatory features in
migration cookie:
for (i = 0 ; i < QEMU_MIGRATION_COOKIE_FLAG_LAST ; i++) {
if (mig->flagsMandatory & (1 << i))
virBufferAsprintf(buf, " <feature name='%s'/>\n",
qemuMigrationCookieFlagTypeToString(i));
}
Some functions were using virDomainDeviceInfo where virDevicePCIAddress
would suffice. Some were only using integers for slots and functions,
assuming the bus numbers are always 0.
Switch from virDomainDeviceInfoPtr to virDevicePCIAddressPtr:
qemuPCIAddressAsString
qemuDomainPCIAddressCheckSlot
qemuDomainPCIAddressReserveAddr
qemuDomainPCIAddressReleaseAddr
Switch from int slot to virDevicePCIAddressPtr:
qemuDomainPCIAddressReserveSlot
qemuDomainPCIAddressReleaseSlot
qemuDomainPCIAddressGetNextSlot
Deleted functions (they would take the same parameters
as ReserveAddr/ReleaseAddr do now.)
qemuDomainPCIAddressReserveFunction
qemuDomainPCIAddressReleaseFunction
The conversion to qemuCaps dropped the ability with qemu{,-kvm} 1.2 and
newer to set the lost tick policy for the PIT. While the
-no-kvm-pit-reinjection option is depreacated, it is still supported at
least through 1.4, it is better to not lose the functionality.
The qemu driver had been calling virSecurityManagerSetProcessLabel()
from a "pre-exec hook" function that is run after the child is forked,
but before exec'ing qemu. This is problematic because the uid and gid
of the child are set by the security driver, but capabilities are
dropped by virCommand - such separation doesn't work; the two
operations must be done together or the capabilities do not transfer
properly to the child process.
This patch switches to using virSecurityManagerSetChildProcessLabel(),
which is called prior to virCommandRun() (rather than being called
*during* virCommandrun() by the hook function), and doesn't set the
UID/GID/security label directly, but instead merely informs virCommand
what it should set them all to when the time is appropriate.
This lets virCommand choose to do the uid/gid and caps dropping all at
the same time if it wants (it does *want* to, but isn't doing so yet;
that's for an upcoming patch).
Setting the uid/gid of the child process was the only thing done by
the hook function in this case, and that can now be done more simply
with virCommandSetUID/GID.
With the majority of fields in the virQEMUDriverPtr struct
now immutable or self-locking, there is no need for practically
any methods to be using the QEMU driver lock. Only a handful
of helper APIs in qemu_conf.c now need it
The hook scripts used by virCommand must be careful wrt
accessing any mutexes that may have been held by other
threads in the parent process. With the recent refactoring
there are 2 potential flaws lurking, which will become real
deadlock bugs once the global QEMU driver lock is removed.
Remove use of the QEMU driver lock from the hook function
by passing in the 'virQEMUDriverConfigPtr' instance directly.
Add functions to the virSecurityManager to be invoked before
and after fork, to ensure the mutex is held by the current
thread. This allows it to be safely used in the hook script
in the child process.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the APIs for managing the shared disk list take
a virHashTablePtr as the primary argument. This is bad
because it requires the caller to deal with locking of
the QEMU driver. Switch the APIs to take the full
virQEMUDriverPtr instance
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add locking to virSecurityManagerXXX APIs, so that use of the
security drivers is internally serialized. This avoids the need
to rely on the global driver locks to achieve serialization
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable locking to be introduced to the security manager
objects later, turn virSecurityManager into a virObjectLockable
class
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
From qemu's point of view these are still just tap devices, so there's
no reason they shouldn't work with vhost-net; as a matter of fact,
Raja Sivaramakrishnan <srajag00@yahoo.com> verified on libvir-list
that at least the qemu_command.c part of this patch works:
https://www.redhat.com/archives/libvir-list/2012-December/msg01314.html
(the hotplug case is extrapolation on my part).
The 'driver->caps' pointer can be changed on the fly. Accessing
it currently requires the global driver lock. Isolate this
access in a single helper, so a future patch can relax the
locking constraints.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid confusion between 'virCapsPtr' and 'qemuCapsPtr'
do some renaming of various fucntions/variables. All
instances of 'qemuCapsPtr' are renamed to 'qemuCaps'. To
avoid that clashing with the 'qemuCaps' typedef though,
rename the latter to virQEMUCaps.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To enable virCapabilities instances to be reference counted,
turn it into a virObject. All cases of virCapabilitiesFree
turn into virObjectUnref
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupPtr instance APIs are safe to use without locking
in the QEMU driver, since all internal state they rely on is
immutable. Update the comment to reflect this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We are requesting for stderr catching for all cases in
virFileWrapperFdNew(). There is no need to have a separate
function just to report an error, esp. when we can do it in
virFileWrapperFdClose().
The qemuParseGlusterString() replaced dst->src without a VIR_FREE() of
what was in there before.
The qemuBuildCommandLine() did not properly free the boot_buf depending
on various usages.
The qemuParseCommandLineDisk() had numerous paths that didn't clean up
the virDomainDiskDefPtr def properly. Adjust the logic to go through an
error: label before cleanup in order to free the resource.
Currently the activePciHostdevs, inactivePciHostdevsd and
activeUsbHostdevs lists are all implicitly protected by the
QEMU driver lock. Now that the lists all inherit from the
virObjectLockable, we can make the locking explicit, removing
the dependency on the QEMU driver lock for correctness.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow modifications to the lists to be synchronized, convert
virPCIDeviceList and virUSBDeviceList into virObjectLockable
classes. The locking, however, will not be self-contained. The
users of these classes will have to call virObjectLock/Unlock
in the critical regions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
