We cannot detect only mount points to figure out whether cgroup v2
is available because systemd uses cgroup v2 for process tracking and
all controllers are mounted as cgroup v1 controllers.
To make sure that this is no the situation we need to check
'cgroup.controllers' file if it's not empty to make sure that cgroup
v2 is not mounted only for process tracking.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.
Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
My commit d6b8838 fixed the uid:gid for the pre-created UNIX sockets
but did not account for the different umask of libvirtd and QEMU.
Since commit 0e1a1a8c we set umask to '0002' for the QEMU process.
Manually tune-up the permissions to match what we would have gotten
if QEMU had created the socket.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1632711
GlusterFS is typically safe when it comes to migration. It's a
network FS after all. However, it can be mounted via FUSE driver
they provide. If that is the case we fail to identify it and
think migration is not safe and require VIR_MIGRATE_UNSAFE flag.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In commit v4.7.0-168-g993d85ae5e I introduced two Icelake CPU models,
but failed to actually include them in the CPU map index.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We switched to opening mode='bind' sockets ourselves:
commit 30fb2276d8
qemu: support passing pre-opened UNIX socket listen FD
in v4.5.0-rc1~251
Then fixed qemuBuildChrChardevStr to change libvirtd's label
while creating the socket:
commit b0c6300fc4
qemu: ensure FDs passed to QEMU for chardevs have correct SELinux labels
v4.5.0-rc1~52
Also add labeling of these sockets to the DAC driver.
Instead of duplicating the logic which decides whether libvirt should
pre-create the socket, assume an existing path meaning that it was created
by libvirt.
https://bugzilla.redhat.com/show_bug.cgi?id=1633389
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This function updates the used QEMU capabilities of @vm by querying
the QEMU capabilities cache.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Move the fetch of @ipAddrLeft to after the goto skip_instantiate
and remove the (req->binding) guard since we know that as long
as req->binding is created, then req->threadkey is filled in.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
It's possible that the @outbuf and/or @errbuf could be NULL
and thus we need to use the right comparison macro.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than initialize actualconfig and expectconfig before
having the possibility that libxlDriverConfigNew could fail
and thus land in cleanup, let's just move them and return
immediately upon failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 87a8a30d6 added the function based on the virsh function,
but used an unsigned long long instead of a double and thus that
limits the maximum result.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
While unlikely, sysconf(_SC_CLK_TCK) could fail leading to
indeterminate results for the subsequent division. So let's
just remove the # define and inline the same change.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
When libxlDomainMigrationDstPrepare adds the @args to an
virNetSocketAddIOCallback using libxlMigrateDstReceive as
the target of the virNetSocketIOFunc @func with the knowledge
that the libxlMigrateDstReceive will virObjectUnref @args
at the end thus not needing to Unref during normal processing
for libxlDomainMigrationDstPrepare.
However, Coverity believes there's an issue with this. The
problem is there can be @nsocks virNetSocketAddIOCallback's
added, but only one virObjectUnref. That means the first
one done will Unref and the subsequent callers may not get
the @args (or @opaque) as they expected. If there's only
one socket returned from virNetSocketNewListenTCP, then sure
that works. However, if it returned more than one there's
going to be a problem.
To resolve this, since we start with 1 reference from the
virObjectNew for @args, we will add 1 reference for each
time @args is used for virNetSocketAddIOCallback. Then
since libxlDomainMigrationDstPrepare would be done with
@args, move it's virObjectUnref from the error: label to
the done: label (since error: falls through). That way
once the last IOCallback is done, then @args will be freed.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Remove the "!params" check from the condition since it's possible
someone could pass a non NULL value there, but a 0 for the nparams
and thus continue on. The external API only checks if @nparams is
non-zero, then check for NULL @params.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced by:
commit 635ae38979
commit 1b745219c7
But their HAVE_ counterparts were never used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduced by:
commit 3c37a171a2
Add check for kill() to fix build of cgroups on win32
Made redundant by:
commit 02f1fd41f6
cgroup macros refactoring, part 1
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduced by:
commit b38d045dea
Remove use of sys/poll.h on mingw
Made redundant by:
commit 0c97e70b74
Update event loop example programs to demonstrate best practice
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduced by:
commit 542039fab0
Fully support mingw builds
Made redundant by:
commit ec8a2d0327
regex: gnulib guarantees that we have regex support
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use one line per entry, to work better with line-based git history.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The preferred location for setting the nested CPU flag changed in
Xen 4.10 and is advertised via the LIBXL_HAVE_BUILDINFO_NESTED_HVM
define. Commit 95d19cd0 changed libxl to use the new preferred
location but unconditionally changed the tests, causing 'make check'
failures against Xen < 4.10 that do not contain the new location.
Commit e94415d5 fixed the failures by only running the tests when
LIBXL_HAVE_BUILDINFO_NESTED_HVM is defined. Since libvirt supports
several versions of Xen that use the old nested location, it is
prudent to test the flag is set correctly. This patch reintroduces
the tests for the legacy location of the nested setting.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The pointer related to uml_driver needs to be checked before its usage
inside the function. Some attributes of the driver are being accessed
while the pointer is NULL considering the current logic.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This reverts commit 1602aa28f8.
There is no need to call virCgroupRemove() nor virCgroupFree() if
virCgroupEnableMissingControllers() fails because it will not modify
'group' at all.
The cleanup of directories is done in virCgroupMakeGroup().
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Both ceph and gluster have been built on RHEL on all architectures for
some time, there's no need to limit them to x86_64.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
RHEL-7 is the only system where gnutls is too old to support @LIBVIRT
specifier.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Turns out, there are couple of bugs that prevent this feature
from being operational. Given how close to the release we are
disable the feature temporarily. Hopefully, it can be enabled
back after all the bugs are fixed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Cgroups are linux specific and we need to make sure that the code is
compiled only on linux. On different OSes it fails the compilation:
../../src/util/vircgroupv1.c:65:19: error: variable has incomplete type 'struct mntent'
struct mntent entry;
^
../../src/util/vircgroupv1.c:65:12: note: forward declaration of 'struct mntent'
struct mntent entry;
^
../../src/util/vircgroupv1.c:74:12: error: implicit declaration of function 'getmntent_r' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
while (getmntent_r(mounts, &entry, buf, sizeof(buf)) != NULL) {
^
../../src/util/vircgroupv1.c:814:39: error: use of undeclared identifier 'MS_NOSUID'
if (mount("tmpfs", root, "tmpfs", MS_NOSUID|MS_NODEV|MS_NOEXEC, opts) < 0) {
^
../../src/util/vircgroupv1.c:814:49: error: use of undeclared identifier 'MS_NODEV'
if (mount("tmpfs", root, "tmpfs", MS_NOSUID|MS_NODEV|MS_NOEXEC, opts) < 0) {
^
../../src/util/vircgroupv1.c:814:58: error: use of undeclared identifier 'MS_NOEXEC'
if (mount("tmpfs", root, "tmpfs", MS_NOSUID|MS_NODEV|MS_NOEXEC, opts) < 0) {
^
../../src/util/vircgroupv1.c:841:65: error: use of undeclared identifier 'MS_BIND'
if (mount(src, group->legacy[i].mountPoint, "none", MS_BIND,
^
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All the system headers are used only if we are compiling on linux
and they all are present otherwise we would have seen build errors
because in our tests/vircgrouptest.c we use only __linux__ to check
whether to skip the cgroup tests or not.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
tests/vircgrouptest.c uses #ifdef __linux__ for a long time and no
failure was reported so far so it's safe to assume that __linux__ is
good enough to guard cgroup code.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The domxml-to-native virsh command accepts either --xml or --domain
option followed by a file or domain name respectively. The --domain
option is documented as required, which means an argument with no option
is treated as --xml. Commit v4.3.0-127-gd86531daf2 broke this by making
--domain optional and thus an argument with no option was treated as
--domain.
https://bugzilla.redhat.com/show_bug.cgi?id=1633077
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Commit 95d19cd unconditionally adjusted the tests to account for
the conditional move of the nested_hvm setting location.
Run the affected tests only for the new setup (witnessed by
LIBXL_HAVE_BUILDINFO_NESTED_HVM).
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Let's ignore the checking of interface type when we call the function
qemuARPGetInterfaces to get IP from host's arp table.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Chen Hanxiao <chenhanxiao@gmail.com>
It may happen that in the list of paths/disk sources to relabel
there is a disk source. If that is the case, the path is NULL. In
that case, we shouldn't try to lock the path. It's likely a
network disk anyway and therefore there is nothing to lock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This shouldn't be needed per-se. Security manager shouldn't
disappear during transactions - it's immutable. However, it
doesn't hurt to grab a reference either - transaction code uses
it after all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This array is allocated in virSecuritySELinuxContextListAppend()
but never freed. This commit is essentially the same as ca25026.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use the mnemonic macros of libdbus for 1 (TRUE) and 0 (FALSE).
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Report a debug message if dbus_watch_handle() returns FALSE.
dbus_watch_handle() returns FALSE if there wasn't enough memory for
reading or writing.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
As documented at
https://dbus.freedesktop.org/doc/api/html/group__DBusConnection.html#ga2522ac5075dfe0a1535471f6e045e1ee
the creator of a non-shared D-Bus connection has to release the last
reference after closing for freeing.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Grab a ref for info->bus (a DBus connection) as long as the while loop
is running. With the grabbed reference it is ensured that info->bus
isn't freed as long as the while loop is executed. This is necessary
as it's allowed to drop the last ref for the bus connection in a
handler.
There was already a bug of this kind in libdbus itself:
https://bugs.freedesktop.org/show_bug.cgi?id=15635.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The only place where VIR_DOMAIN_EVENT_RESUMED should be generated is the
RESUME event handler to make sure we don't generate duplicate events or
state changes. In the worse case the duplicity can revert or cover
changes done by other event handlers.
For example, after QEMU sent RESUME, BLOCK_IO_ERROR, and STOP events
we could happily mark the domain as running and report
VIR_DOMAIN_EVENT_RESUMED to registered clients.
https://bugzilla.redhat.com/show_bug.cgi?id=1612943
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Thanks to the previous commit the RESUME event handler knows what reason
should be used when changing the domain state to VIR_DOMAIN_RUNNING, but
the emitted VIR_DOMAIN_EVENT_RESUMED event still uses a generic
VIR_DOMAIN_EVENT_RESUMED_UNPAUSED detail. Luckily, the event detail can
be easily deduced from the running reason, which saves us from having to
pass one more value to the handler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Whenever we get the RESUME event from QEMU, we change the state of the
affected domain to VIR_DOMAIN_RUNNING with VIR_DOMAIN_RUNNING_UNPAUSED
reason. This is fine if the domain is resumed unexpectedly, but when we
sent "cont" to QEMU we usually have a better reason for the state
change. The better reason is used in qemuProcessStartCPUs which also
sets the domain state to running if qemuMonitorStartCPUs reports
success. Thus we may end up with two state updates in a row, but the
final reason is correct.
This patch is a preparation for dropping the state change done in
qemuMonitorStartCPUs for which we need to pass the actual running reason
to the RESUME event handler and use it there instead of
VIR_DOMAIN_RUNNING_UNPAUSED.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
