This new test case checks whether we are handling NVDIMMs
correctly when checking for overlapping memory devices (see
previous commit). Without previous commit, this test case would
fail, yet it was produced in real life (at least the NVDIMM
part) and thus it is valid.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The existing capabilities were generated against a build made
quite early in the QEMU 8.1.0 development cycle. Update them
to match the final release.
A notable effect of this is that the recently introduced
s390-usb-model test now passes instead of failing: QEMU 8.1.0
enables several new devices on s390x, including the qemu-xhci
USB controller.
There's a small amount of additional churn caused by the fact
that the machine on which I have generated these capabilities
is apparently slightly less fancy than the one used originally.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Show what happens when trying to use a specific type of USB
controller. This currently fails because the QEMU binary doesn't
include the necessary device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These tests currently cover the scenarios in which the guest
can end up with no USB controller, one of which is specific
to s390x. We are going to add more USB on s390x scenarios, so
a different naming convention is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The "auto" SCSI controller model was introduced for use in the
ESX driver, but the QEMU driver doesn't reject the value.
Add a test case showing the behavior when such a configuration
is encountered.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
These are similar to the minimal cases that we just introduced,
but are intended to demonstrate what device or controller model
libvirt will choose when one is not provided by the user.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have just added a number of test cases that supersede it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We currently have a single test case called "minimal", which
suffers from two big flaws:
* it's limited to the x86_64/pc machine type;
* it explicitly enables a number of devices.
Add several test cases, one for each of the architectures and
machine types that we have good support for.
Unlike the existing one, they're *really* minimal: no devices
or controllers at all are present in the input XML. So the new
test cases demonstrate exactly what devices and controller
libvirt will decide to add automatically.
Note that we want both regular and ABI_UPDATE variants of the
various test cases because, in some cases, the behavior for new
guests is not the same as that for existing ones due to backward
compatibility concerns.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This demonstrates that on aarch64, where a native panic device
doesn't exist, it's necessary for the user to specify the model
explicitly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For q35 guests, we normally add a USB controller by default,
but there's a scenario in which we can decide to skip it. Add
test coverage for it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are a number of cases in which we want to test both the
normal behavior and the ABI_UPDATE behavior for the same input
XML.
The way this is currently implemented is ad-hoc, and involves
symlinking the input XML as well as coming up with an
alternative name for the ABI_UPDATE variant: in most cases the
-abi-update suffix is added, but since this is not enforced
there are a couple of cases where we do something else instead.
To make things simpler and more consistent, implement the
naming convention at the macro level. This way, we no longer
need to create any symlinks for the input file, and the output
files are automatically named correctly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The input file is a symlink for the ppc64-usb-controller input
file, so the output files are identical as well. It's just an
unnecessary duplicate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Unify the output directory. Symlinks needed to be adapted to work
properly, but the 'qemuxml2argvdata' symlink can now be removed.
The virschematest exceptions needed to be moved to the proper directory
once the files are moved.
The unification of the output directory now also ensures that files
won't be forgotten once tests are removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Unify the naming of the data directory with the test name.
'tests/qemuxml2argvdata' is for the time converted to a symlink to
'qemuxmlconfdata', to preserve the symlinks in
'tests/qemuxml2xmloutdata'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Include also the output files in the validation of used files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Populate the output filename strings only when the files are expected to
exist, so that other logic can be based on the presence of the strings
rather than having to re-check the test flags for expected state.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
For all supported QEMU version, the virt machine type has a hard
dependency on PCI support, so if we want to test virtio-balloon
together with virtio-mmio we have to either request that
explicitly or trick libvirt by masking capabilities. Do the
former instead of the latter.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of these are either a subset of other tests, or provide
coverage for scenarios that are not really possible: for all
versions of QEMU that we support, the virt machine type has a
hard dependency on the generic PCIe controller, which means
that we will never need to fall back to virtio-mmio.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though virtio-mmio is no longer the default on either
architecture, and likely nobody is using it at this point, we
still provide a way to opt into virtio-mmio usage and want to
keep existing guests working. Add explicit test suite coverage
for this scenario.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After commit 1d8454639f (libvirt 3.0.0), the default address
type for aarch64/virt guests is PCI. These tests are then
pointless, as they are just a subset of other tests, and the
comment attached to them inaccurate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the same as the existing pseries-phb-simple, except that
each of the controllers is given a user alias. If we tried to
start the resulting guest, we'd get an error:
Bus 'ua-phb0' not found
This is because, at the QEMU command line level, the default PHB
is not represented and so it can't be given a custom alias. We're
going to address this issue in a follow-up commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Re-parse and re-format the output XML to validate that the auto-added
bits and the formatter always agree. There's no way to specify an
alternative output file as a libvirt-formatted XML must be reformatted
identically.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'size' of a 'shmem' device is parsed and formatted as a "scaled"
value, stored in bytes, but the formatting scale is mebibytes. This
precission loss combined with the fact that the value was validated only
when starting and the size is formatted only when non-zero meant that
on first parse a value < 1 MiB would be accepted, but would be formatted
to the XML as 0 MiB as it was non-zero but truncated and a subsequent
parse would parse of such XML would parse it as 0 bytes, which in turn
would be interpreted as 'default' size.
Fix the issue by moving the validator, which ensures that the number is
a power of two and more than 1 MiB to the validator code so that it'll
be rejected at XML parsing time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since this tests inactive/config XML files rename it accordingly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
