Commit Graph

288 Commits

Author SHA1 Message Date
Daniel P. Berrange
e397f658b0 Add 'lxc-enter-namespace' command to virsh
Add a 'lxc-enter-namespace' command which accepts a domain name
and then a command + args to run, attached to the container

eg

  virsh -c lxc:/// lxc-enter-namespace demo -- /bin/ps -auxf

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-15 19:09:47 +00:00
Eric Blake
c726d9eca5 docs: remove extra "
* tools/virsh.pod: Fix typo.
2013-01-14 16:47:23 -07:00
liguang
8b9bf7879b Add support for offline migration
Offline migration transfers inactive definition of a domain (which may
or may not be active). After successful completion, the domain remains
in its current state on source host and is defined but inactive on
destination host. It's a bit more clever than virDomainGetXMLDesc() on
source host followed by virDomainDefineXML() on destination host, as
offline migration will run pre-migration hook to update the domain XML
on destination host. Currently, copying non-shared storage is not
supported during offline migration.

Offline migration can be requested with a new migration flag called
VIR_MIGRATE_OFFLINE (which has to be combined with
VIR_MIGRATE_PERSIST_DEST flag).
2012-12-10 21:52:15 +01:00
Ján Tomko
790dfee5ea virsh: allow metadata preallocation when creating volumes
Add --prealloc-metadata flag to these commands:
vol-clone
vol-create
vol-create-as
vol-create-from
2012-12-07 11:46:48 +01:00
Daniel P. Berrange
cef78ed84a Allow comma separated list of shutdown/reboot modes with virsh
The shutdown and reboot commands in virsh allow a comma
separated list of mode values

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-30 20:05:43 +00:00
Daniel P. Berrange
d9a52520c7 Add a 'send-process-signal' command to virsh
* tools/virsh.c: Add send-process-signal
* tools/virsh.pod: Document new command

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-29 15:50:12 +00:00
Michal Privoznik
47c724e54f virsh: Expose new virDomainFSTrim API
It's exposed under domfstrim command. Although the API
doesn't support specifying mount point yet, expose it
anyway.
2012-11-28 16:15:01 +01:00
Eric Blake
e9028f4b73 snapshot: add two more filter sets to API
As we enable more modes of snapshot creation, it becomes more important
to be able to quickly filter based on snapshot properties.  This patch
introduces new filter flags; subsequent patches will introduce virsh
back-compat filtering, as well as actual libvirt filtering.

* include/libvirt/libvirt.h.in (virDomainSnapshotListFlags): Add
five new flags in two new groups.
* src/libvirt.c (virDomainSnapshotNum, virDomainSnapshotListNames)
(virDomainListAllSnapshots, virDomainSnapshotNumChildren)
(virDomainSnapshotListChildrenNames)
(virDomainSnapshotListAllChildren): Document them.
* src/conf/snapshot_conf.h (VIR_DOMAIN_SNAPSHOT_FILTERS_STATUS)
(VIR_DOMAIN_SNAPSHOT_FILTERS_LOCATION): Add new convenience filter
collection macros.
* tools/virsh-snapshot.c (cmdSnapshotList): Add 5 new flags.
* tools/virsh.pod (snapshot-list): Document them.
2012-11-19 08:43:00 -07:00
Eric Blake
79caaf70ae Revert "virsh: add aliases 'boot', 'stop', and 'restart'"
This reverts commits 5f63a5cb42
and ff86b0c97b.  After much list
discussion, consensus was that libvirt aliases should be reserved
to correct typos, otherwise it risks confusion.  Rather, we
should implement a way for users to provide their own aliases
as part of their virsh configuration preferences.
2012-11-16 08:23:57 -07:00
Guido Günther
d49adae2e2 Fix "virsh create" example
We require a file and don't accept standard input:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=692322
2012-11-08 07:28:24 +01:00
Eric Blake
2cd4d8e506 virsh: add snapshot-create-as memspec support
External checkpoints could be created with snapshot-create, but
without libvirt supplying a default name for the memory file,
it is essential to add a new argument to snapshot-create-as to
allow the user to choose the memory file name.  This adds the
option --memspec [file=]name[,snapshot=type], where type can
be none, internal, or external.  For an example,

virsh snapshot-create-as $dom --memspec /path/to/file

is the shortest possible command line for creating an external
checkpoint, named after the current timestamp.

* tools/virsh-snapshot.c (vshParseSnapshotMemspec): New function.
(cmdSnapshotCreateAs): Use it.
* tests/virsh-optparse (test_url): Test it.
* tools/virsh.pod (snapshot-create-as): Document it.
2012-11-07 09:04:18 -07:00
Eric Blake
5f63a5cb42 virsh: document which term is older
Make it clear that the alternate terms have no difference except
for length of time they were supported.

* tools/virsh.pod (start, shutdown, reboot): More documentation.
2012-11-06 08:09:32 -07:00
Eric Blake
ff86b0c97b virsh: add aliases 'boot', 'stop', and 'restart'
https://bugzilla.redhat.com/show_bug.cgi?id=873344 suggested that
the grouping 'boot', 'shutdown', 'reboot'; as well as the grouping
'start', 'stop', 'restart'; might be easier to remember than the
current mix of 'start', 'shutdown', 'reboot'.

Also, touch up the wording of 'reboot' to be more accurate.

* tools/virsh-domain.c (domManagementCmds): Add other command names.
* tools/virsh.pod (start, shutdown, reboot): Document the aliases.
2012-11-06 08:03:48 -07:00
Peter Krempa
5f75bd4bbe snapshot: Add flag to enable creating checkpoints in live state
The default behavior while creating external checkpoints is to pause the
guest while the memory state is captured. We want the users to sacrifice
space saving for creating the memory save image while the guest is live
to minimize downtime.

This patch adds a flag that causes the guest not to be paused before
taking the snapshot.
 *include/libvirt/libvirt.h.in:
    - add new paused reason: VIR_DOMAIN_PAUSED_SNAPSHOT
    - add new flag for taking snapshot: VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
 *tools/virsh-domain-monitor.c:
    - add string representation for VIR_DOMAIN_PAUSED_SNAPSHOT
 *tools/virsh-snapshot.c:
    - add support for VIR_DOMAIN_SNAPSHOT_CREATE_LIVE
 *tools/virsh.pod:
    - add docs for --live option added to use
    VIR_DOMAIN_SNAPSHOT_CREATE_LIVE flag
2012-11-03 14:43:01 +01:00
Michal Privoznik
d1236faa17 net-update docs: s/domain/network/
A leftover from copy paste.
2012-11-01 16:55:56 +01:00
Jiri Denemark
61299a1c98 virsh: Fix POD syntax
The first two hunks fix "Unterminated I<...> sequence" error and the
last one fixes "’=item’ outside of any ’=over’" error.
2012-10-26 12:25:14 +02:00
Jiri Denemark
ab54581549 virsh: Remove --flags from nodesuspend
We always expose individual bits from flags as separate options rather
than exposing a raw flags options. Since virNodeSuspendForDuration does
not currently support any flags, the only way of using this --flags
options that would not fail is "--flags 0", which is equivalent to
omitting the option. Thus it is highly unlikely anyone would actually be
using it and removing it should be safe.
2012-10-26 12:18:31 +02:00
Eric Blake
3cdf4dd49a snapshot: improve snapshot-list error message
https://bugzilla.redhat.com/show_bug.cgi?id=869100 mentioned some
confusion about 'virsh snapshot-list' errors.  Clean up a
misleading error message, and add some documentation.

* tools/virsh-snapshot.c (cmdSnapshotList): Mention --current
rather than --from when appropriate.
* tools/virsh.pod (snapshot-list): Mention that the named starting
point is NOT part of the list except under --tree.
2012-10-25 16:48:08 -06:00
Viktor Mihajlovski
08842171d4 virNodeGetCPUMap: Implement virsh support.
- Added a new host command nodecpumap
- Added documentation

Example:
$ virsh nodecpumap
CPUs present:  8
CPUs online:   3
CPU map:       y-y-y---

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2012-10-23 18:48:06 -06:00
Cole Robinson
2143ced7f5 docs: virsh: clarify behavior of send-key
https://bugzilla.redhat.com/show_bug.cgi?id=860004
2012-10-21 13:21:50 -04:00
Osier Yang
f81f0f2f1d node_memory: Add new parameter field to tune the new sysfs knob
Upstream kernel introduced new sysfs knob "merge_across_nodes" to
specify if pages from different numa nodes can be merged. When set
to 0, only pages which physically reside in the memory area of
same NUMA node can be merged. When set to 1, pages from all nodes
can be merged.

This patch supports the tuning by adding new param field
"shm_merge_across_nodes".
2012-10-15 17:35:54 +08:00
Ján Tomko
149c87b49d Various typos and misspellings 2012-10-12 00:03:43 +02:00
Jiri Denemark
28f8dfdccc Add MIGRATABLE flag for virDomainGetXMLDesc
Using VIR_DOMAIN_XML_MIGRATABLE flag, one can request domain's XML
configuration that is suitable for migration or save/restore. Such XML
may contain extra run-time stuff internal to libvirt and some default
configuration may be removed for better compatibility of the XML with
older libvirt releases.

This flag may serve as an easy way to get the XML that can be passed
(after desired modifications) to APIs that accept custom XMLs, such as
virDomainMigrate{,ToURI}2 or virDomainSaveFlags.
2012-10-11 15:11:42 +02:00
Eric Blake
2a1aaa609e virsh: add qemu-monitor-command --pretty
I was using qemu-monitor-command during development, and found it quite
hard to use.  Compare the results of this patch on ease of reading:

$ virsh qemu-monitor-command          dom '{"execute":"query-version"}'
{"return":{"qemu":{"micro":1,"minor":12,"major":0},"package":"(qemu-kvm-0.12.1.2)"},"id":"libvirt-7683"}

$ virsh qemu-monitor-command --pretty dom '{"execute":"query-version"}'
{
    "return": {
        "qemu": {
            "micro": 1,
            "minor": 12,
            "major": 0
        },
        "package": "(qemu-kvm-0.12.1.2)"
    },
    "id": "libvirt-7674"
}

* tools/virsh-host.c (cmdQemuMonitorCommand): New option.
* tools/virsh.pod (qemu-monitor-command): Document it.
2012-10-08 15:47:06 -06:00
Dave Allan
13c69cd0b4 Add note about numeric domain names to manpage
Clarify that domains with numeric names can only be identified by
their domain id.
2012-10-01 15:00:13 -06:00
Laine Stump
fe7872827f virsh: new net-update command
This command uses the new virNetworkUpdate() API to modify an existing
network definition, and optionally have those modifications take
effect immediately without restarting the network.

An example usage:

  virsh net-update mynet add-last ip-dhcp-host \
   "<host mac='00:11:22:33:44:55' ip='192.168.122.45'/>" \
   --live --config

If you like, you can instead put the xml into a file, and call like
this:

  virsh net-update mynet add ip-dhcp-host /tmp/myxml.xml
   --live --config

virsh will autodetect whether the argument is itself an xml element,
or if it's a file, by looking at the first character - the first
character of an xml element is always "<", and the first character of
a file is almost always *not* "<" (in the rare case that it is, the
user could specify "./<filename...").

A --parent-index option is also available (to give the index within a
list of parent objects, e.g. the index of the parent <ip> element when
updating ip-dhcp-host elements), but is optional and at least for now
will probably be used rarely.

--live, --config, and --current options - if you specify --live, only
the live state of the network will be updated. If you also specify
--config, then the persistent configuration will also be updated;
these two commands can be given separately, or both together. If you
don't specify either (you can optionally specify "--current" for the
same effect), then the "current" config will be updated (i.e. if the
network is active, then only its live config is affected, but if the
network is inactive, only the persistent config is affected).
2012-09-20 22:20:22 -04:00
Eric Blake
ed23b10660 blockjob: add virsh blockcommit
The new command 'virsh blockcommit $dom $disk' requests the start
of an asynchronous commit operation across the entire chain of
$disk.  Further arguments can fine-tune which portion of the
chain is committed.  Existing 'virsh blockjob' commands can then
track the status, change the bandwidth, or abort the commit job.

With a bit more on the command line, 'virsh blockcommit $dom $disk
--wait --verbose' can be used for blocking behavior, with visual
feedback on the overall status, and can be canceled with Ctrl-C.

The overall design, including the wait loop logic, borrows heavily
from the existing blockpull command.

* tools/virsh-domain.c (cmdBlockCommit): New function.
* tools/virsh.pod (blockcommit): Document it.
2012-09-17 21:44:49 -06:00
Peter Krempa
60b0284f24 virsh: Clarify behavior of domain list filtering.
Some combinations of filtering flags produce no result. This patch tries
to clarify this.
2012-09-17 16:35:24 +02:00
Osier Yang
0e96fa5489 node_memory: Expose the APIs to virsh
New command node-memory-tune to get/set the node memory parameters,
only two parameters are allowed to set (pages_to_scan, and sleep_millisecs,
see documents in this patch for more details).

Example of node-memory-tune's output:

Shared memory:
	pages_to_scan   100
	sleep_millisecs 20
	pages_shared    0
	pages_sharing   0
	pages_unshared  0
	pages_volatile  0
	full_scans      0
2012-09-17 13:55:35 +08:00
Osier Yang
d15d092cda list: Use virConnectListAllSecrets in virsh
This introduces four new options for secret-list, to filter the
returned secrets by whether it's ephemeral or not, and/or by
whether it's private or not.

* tools/virsh-secret.c: (New helper vshSecretSorter,
  vshSecretListFree, and vshCollectSecretList; Use the new
  API for secret-list; error out if flags are specified,
  because there is no way to filter the results when using
  old APIs (no APIs to get the properties (ephemeral, private)
  of a secret yet).

* tools/virsh.pod: Document the 4 new options.
2012-09-17 13:23:19 +08:00
Osier Yang
aa20e97578 list: Use virConnectListAllNodeDevices in virsh
tools/virsh-nodedev.c:
  * vshNodeDeviceSorter to sort node devices by name

  * vshNodeDeviceListFree to free the node device objects list.

  * vshNodeDeviceListCollect to collect the node device objects, trying
    to use new API first, fall back to older APIs if it's not supported.

  * Change option --cap to accept multiple capability types.

tools/virsh.pod
  * Update document for --cap
2012-09-17 11:32:53 +08:00
Osier Yang
895913dd59 list: Use virConnectListAllNetworks in virsh
tools/virsh-network.c:
  * vshNetworkSorter to sort networks by name

  * vshNetworkListFree to free the network objects list.

  * vshNetworkListCollect to collect the network objects, trying
    to use new API first, fall back to older APIs if it's not supported.

  * New options --persistent, --transient, --autostart, --no-autostart,
    for net-list, and new field 'Persistent' for its output.

tools/virsh.pod:
  * Add documents for the new options.
2012-09-11 18:35:06 +08:00
Osier Yang
6cdf0aafc8 virsh: Improve the document for pool-list
Which is lost by commit 93a346d353.
2012-09-07 11:10:48 +08:00
Osier Yang
93a346d353 list: Use virConnectListAllStoragePools in virsh
tools/virsh-pool.c:
  * vshStoragePoolSorter to sort the pool list by pool name.

  * struct vshStoragePoolList to present the pool list, pool info
    is collected by list->poolinfo if 'details' is specified by
    user.

  * vshStoragePoolListFree to free the pool list

  * vshStoragePoolListCollect to collect the pool list, new API
    virStorageListAllPools is tried first, if it's not supported,
    fall back to older APIs.

  * New options --persistent, --transient, --autostart, --no-autostart
    and --type for pool-list. --persistent or --transient is to filter
    the returned pool list by whether the pool is persistent or not.
    --autostart or --no-autostart is to filter the returned pool list
    by whether the pool is autostarting or not. --type is to filter
    the pools by pool types. E.g.

    % virsh pool-list --all --persistent --type dir,disk

tools/virsh.pod:
   * Add documentations for the new options.
2012-09-06 22:09:49 +08:00
Osier Yang
974a63305e virsh: Fix the wrong doc for pool-list
The storage pool's management doesn't relate with a domain, it
probably was an intention, but not achieved yet. And the fact
is only active pools are listed by default.
2012-09-06 22:04:56 +08:00
Martin Kletzander
aa698a49dd docs: correct dompmwakeup description 2012-09-05 06:36:55 +02:00
Jiri Denemark
eac1ab053c virsh: Document subdriver option of attach-disk 2012-08-31 13:30:19 +02:00
MATSUDA Daiki
bf51299d57 agent: add qemu-agent-command to virsh
Add qemu-agent-command to virsh to support virDomainQemuAgentCommand().

Signed-off-by: MATSUDA Daiki <matsudadik@intellilink.co.jp>
2012-08-23 19:11:03 +08:00
Stefan Hajnoczi
5b7f5a049c docs: fix blockpull/blockcopy bandwidth Mbps -> MiB/s
The bandwidth units for blockpull and blockcopy are in Megabytes per
Second, not Megabits per Second.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-08-22 17:15:56 +02:00
Hu Tao
e051c482aa new interface to control emulator_period/emulator_quota
This patch adds two macros: VIR_DOMAIN_SCHEDULER_EMULATOR_PERIOD,
VIR_DOMAIN_SCHEDULER_EMULATOR_QUOTA for controlling cpu bandwidth
for emulator activities not tied to vcpus
2012-08-22 16:56:41 +08:00
Hu Tao
4860596044 new command emulatorpin 2012-08-22 16:38:13 +08:00
Guannan Ren
7aea9b8cf7 util: set minimum value of nodesuspend duration to 60 seconds
Change the permissible minimum value of nodesuspend duration time
to 60 seconds. If option is less than the value, reports error.
Update virsh help and manpage the infomation.
2012-07-26 15:29:03 +08:00
Jan Tomko
aa03b1471c virsh man page - domain-id consistency
Using 'domain' to represent domain name, domain id or uuid all over
the man page, to be consistent with virsh help.
2012-07-25 12:03:28 -06:00
Jan Tomko
d9bbf217b1 virsh: Clarify that memtune parameters may be rounded in the man page 2012-07-24 15:34:49 -06:00
Guido Günther
0429e5f0c8 virsh: Add domhostname
to query the guest's hostname.
2012-07-20 21:54:35 +02:00
Jiri Denemark
3189dfb163 Clarify direct migration
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:

    this function is not supported by the connection driver:
    virDomainMigrateToURI2

which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:

    Requested operation is not valid: direct migration is not supported
    by the connection driver
2012-07-13 09:15:18 +02:00
Peter Krempa
e16d434da7 virsh: Clarify documentation for virsh dompmsuspend command
Clarify the docs to make more clear what this command does and that it
requires a guest agent running in the guest.
2012-07-09 19:38:22 +02:00
Doug Goldstein
421a200987 virsh: Add domdisplay cmd for VNC, SPICE and RDP
v2:
- Refactored to use virBuffer
- Refactored to use virXPath wrappers
- Added support for tls-port and password for SPICE
- Added optional flag to disable SPICE password to the URI
- Added support for RDP
- Fixed code reviews

Add a new 'domdisplay' command that provides a URI for VNC, SPICE and
RDP connections. Presently the 'vncdisplay' command provides you with
the port info that QEMU is listening on but there is no counterpart for
SPICE and RDP. Additionally this provides you with the bind address as
specified in the XML, which the existing 'vncdisplay' lacks. For SPICE
connections it supports secure and unsecure channels and optionally
providing the password for the SPICE channel.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
2012-06-27 16:17:00 +02:00
Michal Privoznik
8d27005b50 storage: Introduce --inactive for pool-dumpxml
Storage is one of the last domains in libvirt where we don't fully
utilize inactive and live XML. Okay, it might be because we don't
have support for that. So implement such support. However, we need
to fallback when talking to old daemon which doesn't support this
new flag called VIR_STORAGE_XML_INACTIVE.
2012-06-25 13:23:28 +02:00
Peter Krempa
d62e51f86b virsh: add support for virConnectListAllDomains and clean up cmdList
This patch makes use of the newly added api virConnectListAllDomains()
to list domains in virsh.

Virsh now represents lists of domains using an internal structure
vshDomainList. This structure contains the virDomainPtr list as provided
by virConnectListAllDomains() and the count of domains in the list.

For backwards compatibility, the function vshDomainListCollect was added
that tries to enumerate the domains using the new API and if the API is
not supported falls back to the older approach with the two list
functions.  The helper function also simulates filtering by all
currently supported flags added with virConnectListAllDomains().

This patch also cleans up the "list" command handler to use the new
helpers and adds new command line flags to make use of filtering.
2012-06-21 16:07:06 +02:00