The current code for using -drive simply sets the -drive 'index'
parameter. QEMU internally converts this to bus/unit depending
on the type of drive. This does not give us precise control over
the bus/unit assignment though. This change switches over to make
libvirt explicitly calculate the bus/unit number.
In addition bus/unit/index are actually irrelevant for VirtIO
disks, since each virtio disk is a separate PCI device. No disk
controller is involved.
Doing the conversion to bus/unit in libvirt allows us to correctly
attach SCSI controllers when required.
* src/qemu/qemu_conf.c: Specify bus/unit instead of index for
disks
* tests/qemuxml2argvdata/qemuxml2argv-disk*.args: Switch over from
using index=NNNN, to bus=NN, unit=NN for SCSI/IDE/Floppy disks
To enable it to be called from multiple locations, split out
the code for building the -drive arg string. This will be needed
by later patches which do drive hotplug, the conversion to use
-device, and the conversion to controller/bus/unit addressing
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Add qemuBuildDriveStr
for building -drive arg string
Convert the QEMU monitor APIs over to use virDomainDeviceAddress
structs for passing addresses in/out, instead of individual bits.
This makes the number of parameters smaller & easier to deal with.
No functional change
* src/qemu/qemu_driver.c, src/qemu/qemu_monitor.c,
src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_text.c,
src/qemu/qemu_monitor_text.h: Change monitor hotplug APIs to
take an explicit address ptr for all host/guest addresses
This augments virDomainDevice with a <controller> element
that is used to represent disk controllers (e.g., scsi
controllers). The XML format is given by
<controller type="scsi" index="<num>">
<address type="pci" domain="0xNUM" bus="0xNUM" slot="0xNUM"/>
</controller>
where type denotes the disk interface (scsi, ide,...), index
is an integer that identifies the controller for association
with disks, and the <address> element specifies the controller
address on the PCI bus as described in previous commits
The address element can be omitted; in this case, an address
will be assigned automatically.
Most of the code in this patch is from Wolfgang Mauerer's
previous disk controller series
* docs/schemas/domain.rng: Define syntax for <controller>
XML element
* src/conf/domain_conf.c, src/conf/domain_conf.h: Define
virDomainControllerDef struct, and routines for parsing
and formatting XML
* src/libvirt_private.syms: Add virDomainControllerInsert
and virDomainControllerDefFree
When parsing the <disk> element specification, if no <address>
is provided for the disk, then automatically assign one based on
the <target dev='sdXX'/> device name. This provides for backwards
compatability with existing applications using libvirt, while also
allowing new apps to have complete fine grained control.
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: Add virDomainDiskDefAssignAddress()
for assigning a controller/bus/unit address based on disk target
* src/qemu/qemu_conf.c: Call virDomainDiskDefAssignAddress() after
generating XML from ARGV
* tests/qemuxml2argvdata/*.xml: Add in drive address information
to all XML files
Add the virDomainDeviceAddress information to the sound, video
and watchdog devices. This means all of them gain the new XML
element
<address .... />
This brings them upto par with disk/net/hostdev devices which
already have address info
* src/conf/domain_conf.h: Add virDomainDeviceAddress to sound,
video & watchdog device struts.
* src/conf/domain_conf.c: Hook up parsing/formatting for
virDomainDeviceAddress in sound, video & watchdog devices
* docs/schemas/domain.rng: Associate device address info
with sound, video & watchdog
Introduce a new structure
struct _virDomainDeviceDriveAddress {
unsigned int controller;
unsigned int bus;
unsigned int unit;
};
and plug that into virDomainDeviceAddress and generates XML that
looks like
<address type='drive' controller='1' bus='0' unit='5'/>
This syntax will be used by the QEMU driver to explicitly control
how drives are attached to the bus
* src/conf/domain_conf.h, src/conf/domain_conf.c: Parsing and
formatting of drive addresses
* docs/schemas/domain.rng: Define new address format for drives
All guest devices now use a common device address structure
summarized by:
enum virDomainDeviceAddressType {
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_NONE,
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_PCI,
};
struct _virDomainDevicePCIAddress {
unsigned int domain;
unsigned int bus;
unsigned int slot;
unsigned int function;
};
struct _virDomainDeviceInfo {
int type;
union {
virDomainDevicePCIAddress pci;
} addr;
};
This replaces the anonymous structs in Disk/Net/Hostdev data
structures. Where available, the address is *always* printed
in the XML file, instead of being hidden in the internal state
file.
<address type='pci' domain='0x0000' bus='0x1e' slot='0x07' function='0x0'/>
The structure definition is based on Wolfgang Mauerer's disk
controller patch series.
* docs/schemas/domain.rng: Define the <address> syntax and
associate it with disk/net/hostdev devices
* src/conf/domain_conf.h, src/conf/domain_conf.c,
src/libvirt_private.syms: APIs for parsing/formatting address
information. Also remove the QEMU specific 'pci_addr' attributes
* src/qemu/qemu_driver.c: Replace use of 'pci_addr' attrs with
new standardized format.
Only print out '.' for each test case, full test output can be
re-enabled with VIR_TEST_VERBOSE=1, or VIR_TEST_DEBUG=XXXX
Sample output now looks like
TEST: statstest
........................................ 40
................................... 75 OK
PASS: statstest
TEST: qparamtest
................................ 32 OK
PASS: qparamtest
TEST:
............ 12 OK
With the introduction virDispatchError, hook function errors are
never sent through the error callback, so users will never see
these messages.
Fix this by calling virDispatchError after hook failure.
Based off how QEMU does it, look through /sys/bus/usb/devices/* for
matching vendor:product info, and if found, use info from the surrounding
files to build the device's /dev/bus/usb path.
This fixes USB device assignment by vendor:product when running qemu
as non-root (well, it should, but for some reason I couldn't reproduce
the failure people are seeing in [1], but it appears to work properly)
[1] https://bugzilla.redhat.com/show_bug.cgi?id=542450
The daemon will attempt to unregister domain events on client disconnect,
even if no events were ever registered. This raises an unneeded error.
Track in the qemu_client structure if events have been registered, and
check this when performing cleanup.
udev doesn't prefix USB product/vendor info with '0x', so the
strtol conversions were wrong for the product field (vendor already
set the correct base). Make the change for PCI product/vendor as
well to be safe.
This fixes USB device assignment via virt-manager.
This allows debug statements and raised errors in hook functions to
actually be logged somewhere (stderr). Users can enable debugging in the
daemon and now see more info in /var/log/libvirt/...
Upstream xen has changed parameters to the migration operation
several times over the past 18 months. Changeset 17553 removed
the resouce parameter, Changesets 17709, 17753, and 20326 added
ssl, node, and change_home_server parameters respectively.
Fortunately, testing has revealed that xend will fail the
operation if a parameter is missing but happily honor it if
unknown parameters are provided. Thus all currently supported
parameters can be provided, satisfying current xend but not
regressing older versions.
The virRaiseErrorFull() may invoke the error handler callback
functions an application has registered. This is not good
because the connection object may not be available at this
point, and the caller may be holding locks. This creates a
problem if the error handler calls back into libvirt.
The solutuon is to move invocation of the handler into the
final cleanup code in the public API entry points, where it
is guarenteed to have safe state.
* src/libvirt.c: Invoke virDispatchError() in all error paths
* src/util/virterror.c: Remove virSetConnError/virSetGlobalError,
replacing with virDispatchError(). Move invocation of the
error callbacks into virDispatchError() instead of the
virRaiseErrorFull function which is not in a safe context
qemudWaitForMonitor calls qemudReadLogOutput with qemudFindCharDevicePTYs
as callback. qemudFindCharDevicePTYs calls qemudExtractTTYPath to assign
a string to chr->data.file.path. Afterwards qemudWaitForMonitor may call
qemudFindCharDevicePTYsMonitor that overwrites chr->data.file.path without
freeing the old value. This results in leaking the memory allocated by
qemudExtractTTYPath.
Report an OOM error if the strdup in qemudFindCharDevicePTYsMonitor fails.
Only use pseudo-random generator for uuid if using /dev/random fails.
* src/util/uuid.c: The original code. would only print the warning
message if using /dev/random failed, but would still go ahead and call
virUUIDGeneratePseudoRandomBytes in all cases anyway.
* docs/Makefile.am (uninstall-local): Separate $$f from preceding
dir name with a "/" and use $$(basename $$f) rather than $$f, since
some values of $$f are prefixed with devhelp/.
Without this change, ./autogen.sh --disable-shared && make would
evoke a "can not build a shared library" failure for libvirtmod.la
due to the new use of libtool's -shared link option in
python/Makefile.am. Now, --disable-shared also
disables building python.
* configure.in: Make --disable-shared imply --without-python and
silently override --with-python.
Improved by: Diego Elio Pettenò <flameeyes@gmail.com>
Currently only the faultcode and faultstring are deserialized, the
detail part is ignored. The implementation of many new SOAP types
would be necessary to deserialize the detail part correctly. As an
intermediate solution the raw response is dumped to the debug log.
The -mem-prealloc flag should be used when using large pages
This ensures qemu tries to allocate all required memory immediately,
rather than when first used. The latter mode will crash qemu
if hugepages aren't available when accessed, while the former
should gracefully fallback to non-hugepages.
* src/qemu/qemu_conf.c: add -mem-prealloc flag to qemu command line
when using large pages
xen-unstable c/s 20685 changed the domctl interface, adding a field to
xen_domctl_getdomaininfo structure. This additional field causes stack
corruption in libvirt. xen-unstable c/s 20711 rightly bumped the domctl
interface version so it is at least possible to handle the new field.
This change accounts for shr_pages field added to xen_domctl_getdomaininfo
structure.
