The network hook script gets called whenever an interface is plugged
into or unplugged from a network, but even though the full XML of both
the network and the domain is included, there is no reasonable way to
determine what exact resources the plugged interface is using:
1) Prior to a recent patch which modified the status XML of interfaces
to include the information about actual hardware resources used, it
would be possible to scan through the domain XML output sent to the
hook, and from there find the correct interface, but that interface
definition would not include any runtime info (e.g. bandwidth or vlan
taken from a portgroup, or which physdev was used in case of a macvtap
network).
2) After the patch modifying the status XML of interfaces, the network
name would no longer be included in the domain XML, so it would be
completely impossible to determine which interface was the one being
plugged.
To solve that problem, this patch includes a single <interface>
element at the beginning of the XML sent to the network hook for
"plugged" and "unplugged" (just inside <hookData>) that is the status
XML of the interface being plugged. This XML will include all info
gathered from the chosen network and portgroup.
NB: due to hardcoded spaces in all of the device *Format() functions,
the <interface> element inside the <hookData> will be indented by 6
spaces rather than 2. I had intended to fix this, but it turns out
that to make virDomainNetDefFormat() indentation relative, I would
have to do the same to virDomainDeviceInfoFormat(), and that function
is called from 19 places - making that a prerequisite of this patch
would cause too many merge difficulties if we needed to backport
network hooks, so I chose to ignore the problem here and fix the
problem for *all* devices in a followup later.
Currently, networkRunHook() is called in networkAllocateActualDevice and
friends. These functions, however, doesn't necessarily work on networks,
For example, if domain's interface is defined in this fashion:
<interface type='bridge'>
<mac address='52:54:00:0b:3b:16'/>
<source bridge='virbr1'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</interface>
The networkAllocateActualDevice jumps directly onto 'validate' label as
the interface is not type of 'network'. Hence, @network is left
initialized to NULL and networkRunHook(network, ...) is called. One of
the things that the hook function does is dereference @network. Soupir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The networkNotifyActualDevice function is accepting two arguments, not
one:
qemu/qemu_process.c: In function 'qemuProcessNotifyNets':
qemu/qemu_process.c:2776:47: error: macro "networkNotifyActualDevice" passed 2 arguments, but takes just 1
if (networkNotifyActualDevice(def, net) < 0)
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Basically, the idea is copied from domain code, where tainting
exists for a while. Currently, only one taint reason exists -
VIR_NETWORK_TAINT_HOOK to mark those networks which caused invoking
of hook script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The lack of debug printings might be frustrating in the future.
Moreover, this function doesn't follow the usual pattern we have in the
rest of the code:
int ret = -1;
/* do some work */
ret = 0;
cleanup:
/* some cleanup work */
return ret;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1057321
pointed out that we weren't honoring the <bandwidth> element in
libvirt networks using <forward mode='bridge'/>. In fact, these
networks are just a method of giving a libvirt network name to an
existing Linux host bridge on the system, and libvirt doesn't have
enough information to know where to set such limits. We are working on
a method of supporting network bandwidths for some specific cases of
<forward mode='bridge'/>, but currently libvirt doesn't support it. So
the proper thing to do now is just log an error when someone tries to
put a <bandwidth> element in that type of network. (It's unclear if we
will be able to do proper bandwidth limiting for macvtap networks, and
most definitely we will not be able to support it for hostdev
networks).
While looking through the network XML documentation and comparing it
to the networkValidate function, I noticed that we also ignore the
presence of a mac address in the config in the same cases, rather than
failing so that the user will understand that their desired action has
not been taken.
This patch updates networkValidate() (which is called any time a
persistent network is defined, or a transient network created) to log
an error and fail if it finds either a <bandwidth> or <mac> element
and the network forward mode is anything except 'route'. 'nat', or
nothing. (Yes, neither of those elements is acceptable for any macvtap
mode, nor for a hostdev network).
NB: This does *not* cause failure to start any existing network that
contains one of those elements, so someone might have erroneously
defined such a network in the past, and that network will continue to
function unmodified. I considered it too disruptive to suddenly break
working configs on the next reboot after a libvirt upgrade.
The previous patch fixed "forwardPlainNames" so that it really is
doing only what is intended, but left the default to be
"forwardPlainNames='no'". Discussion around the initial version of
that patch led to the decision that the default should instead be
"forwardPlainNames='yes'" (i.e. the original behavior before commit
f3886825). This patch makes that change to the default.
In commit f386825 we began adding the options
--domain-needed
--local=/$mydomain/
to all dnsmasq commandlines with the stated reason of preventing
forwarding of DNS queries for names that weren't fully qualified
domain names ("FQDN", i.e. a name that included some "."s and a domain
name). This was later changed to
domain-needed
local=/$mydomain/
when we moved the options from the dnsmasq commandline to a conf file.
The original patch on the list, and discussion about it, is here:
https://www.redhat.com/archives/libvir-list/2012-August/msg01594.html
When a domain name isn't specified (mydomain == ""), the addition of
"domain-needed local=//" will prevent forwarding of domain-less
requests to the virtualization host's DNS resolver, but if a domain
*is* specified, the addition of "local=/domain/" will prevent
forwarding of any requests for *qualified* names within that domain
that aren't resolvable by libvirt's dnsmasq itself.
An example of the problems this causes - let's say a network is
defined with:
<domain name='example.com'/>
<dhcp>
..
<host mac='52:54:00:11:22:33' ip='1.2.3.4' name='myguest'/>
</dhcp>
This results in "local=/example.com/" being added to the dnsmasq options.
If a guest requests "myguest" or "myguest.example.com", that will be
resolved by dnsmasq. If the guest asks for "www.example.com", dnsmasq
will not know the answer, but instead of forwarding it to the host, it
will return NOT FOUND to the guest. In most cases that isn't the
behavior an admin is looking for.
A later patch (commit 4f595ba) attempted to remedy this by adding a
"forwardPlainNames" attribute to the <dns> element. The idea was that
if forwardPlainNames='yes' (default is 'no'), we would allow
unresolved names to be forwarded. However, that patch was botched, in
that it only removed the "domain-needed" option when
forwardPlainNames='yes', and left the "local=/mydomain/".
Really we should have been just including the option "--domain-needed
--local=//" (note the lack of domain name) regardless of the
configured domain of the network, so that requests for names without a
domain would be treated as "local to dnsmasq" and not forwarded, but
all others (including those in the network's configured domain) would
be forwarded. We also shouldn't include *either* of those options if
forwardPlainNames='yes'. This patch makes those corrections.
This patch doesn't remedy the fact that default behavior was changed
by the addition of this feature. That will be handled in a subsequent
patch.
This reverts commit 2996e6be19
and some parts of 2636dc8c4d.
The former one tried to implement QoS setting on bridgeless networks.
However, as discussed upstream [1], the patch is far away from being
useful in even a single case. The whole idea of network QoS is to have
aggregated limits over several interfaces. This patch is doing
completely the opposite when merging two QoS settings (from the network
and the domain interface) into one which is then set at the domain
interface itself, not the network.
The latter one is the test for the previous one. Now none of them makes
sense.
1: https://www.redhat.com/archives/libvir-list/2014-January/msg01441.html
Conflicts:
tests/virnetdevbandwidthtest.c: New test has been introduced since
then.
https://bugzilla.redhat.com/show_bug.cgi?id=1055484
Currently, libvirt's XML schema of network allows QoS to be defined for
every network even though it has no bridge. For instance:
<network>
<name>vdsm-no-bridge</name>
<forward mode='passthrough'>
<interface dev='em1.10'/>
</forward>
<bandwidth>
<inbound average='1000' peak='5000' burst='1024'/>
<outbound average='1000' burst='1024'/>
</bandwidth>
</network>
The bandwidth limitations can be, however, applied even on such
networks. In fact, they are going to be applied on the interface that
will be connected to the network on a domain startup. This approach,
however, has one limitation. With bridged networks, there are two points
where QoS can be set: bridge and domain interface. The lower limit of
the two is enforced then. For instance, if the interface has 10Mbps
average, but the network only 1Mbps, there's no way for interface to
transmit packets faster than the 1Mbps limit. With two points this is
enforced by kernel. With only one point, we must combine both QoS
settings into one which is set afterwards. Look at
virNetDevBandwidthMinimal() and you'll understand immediately what I
mean.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ever since ACL filtering was added in commit 7639736 (v1.1.1), a
user could still use event registration to obtain access to a
domain that they could not normally access via virDomainLookup*
or virConnectListAllDomains and friends. We already have the
framework in the RPC generator for creating the filter, and
previous cleanup patches got us to the point that we can now
wire the filter through the entire object event stack.
Furthermore, whether or not domain:getattr is honored, use of
global events is a form of obtaining a list of networks, which
is covered by connect:search_domains added in a93cd08 (v1.1.0).
Ideally, we'd have a way to enforce connect:search_domains when
doing global registrations while omitting that check on a
per-domain registration. But this patch just unconditionally
requires connect:search_domains, even when no list could be
obtained, based on the following observations:
1. Administrators are unlikely to grant domain:getattr for one
or all domains while still denying connect:search_domains - a
user that is able to manage domains will want to be able to
manage them efficiently, but efficient management includes being
able to list the domains they can access. The idea of denying
connect:search_domains while still granting access to individual
domains is therefore not adding any real security, but just
serves as a layer of obscurity to annoy the end user.
2. In the current implementation, domain events are filtered
on the client; the server has no idea if a domain filter was
requested, and must therefore assume that all domain event
requests are global. Even if we fix the RPC protocol to
allow for server-side filtering for newer client/server combos,
making the connect:serach_domains ACL check conditional on
whether the domain argument was NULL won't benefit older clients.
Therefore, we choose to document that connect:search_domains
is a pre-requisite to any domain event management.
Network events need the same treatment, with the obvious
change of using connect:search_networks and network:getattr.
* src/access/viraccessperm.h
(VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS)
(VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional
effect of the permission.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Add new parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event.c (_virObjectEventCallback): Track a filter.
(virObjectEventDispatchMatchCallback): Use filter.
(virObjectEventCallbackListAddID): Register filter.
* src/conf/domain_event.c (virDomainEventFilter): New function.
(virDomainEventStateRegister, virDomainEventStateRegisterID):
Adjust callers.
* src/conf/network_event.c (virNetworkEventFilter): New function.
(virNetworkEventStateRegisterID): Adjust caller.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY)
(REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a
filter, and require connect:search_domains instead of weaker
connect:read.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventRegisterAny)
(testConnectNetworkEventRegisterAny): Update callers.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventRegisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventRegisterAny): Likewise.
* src/qemu/qemu_driver.c (qemuConnectDomainEventRegister)
(qemuConnectDomainEventRegisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
While comparing network and domain events, I noticed that the
test driver had to do a cast in one place and not the other.
For consistency, we should hide the necessary casting as low
as possible in the stack, with everything else using saner
types.
* src/conf/network_event.h (virNetworkEventStateRegisterID): Alter
type.
* src/conf/network_event.c (virNetworkEventStateRegisterID): Hoist
cast here.
* src/test/test_driver.c (testConnectNetworkEventRegisterAny):
Simplify callers.
* src/remote/remote_driver.c
(remoteConnectNetworkEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When the host is configured with very restrictive firewall (default policy
is DROP for all chains, including OUTPUT), the bridge driver for Linux
adds netfilter entries to allow DHCP and DNS requests to go from the VM
to the dnsmasq of the host.
The issue that this commit fixes is the fact that a DROP policy on the OUTPUT
chain blocks the DHCP replies from the host’s dnsmasq to the VM.
As DHCP replies are sent in UDP, they are not caught by any --ctstate ESTABLISHED
rule and so, need to be explicitly allowed.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr.eu.org>
Ever since their introduction (commit 1509b80 in v0.5.0 for
virConnectDomainEventRegister, commit 4445723 in v0.8.0 for
virConnectDomainEventDeregisterAny), the event deregistration
functions have been documented as returning 0 on success;
likewise for older registration (only the newer RegisterAny
must return a non-zero callbackID). And now that we are
adding virConnectNetworkEventDeregisterAny for v1.2.1, it
should have the same semantics.
Fortunately, all of the stateful drivers have been obeying
the docs and returning 0, thanks to the way the remote_driver
tracks things (in fact, the RPC wire protocol is unable to
send a return value for DomainEventRegisterAny, at least not
without adding a new RPC number). Well, except for vbox,
which was always failing deregistration, due to failure to
set the return value to anything besides its initial -1.
But for local drivers, such as test:///default, we've been
returning non-zero numbers; worse, the non-zero numbers have
differed over time. For example, in Fedora 12 (libvirt 0.8.2),
calling Register twice would return 0 and 1 [the callbackID
generated under the hood]; while in Fedora 20 (libvirt 1.1.3),
it returns 1 and 2 [the number of callbacks registered for
that event type]. Since we have changed the behavior over
time, and since it differs by local vs. remote, we can safely
argue that no one could have been reasonably relying on any
particular behavior, so we might as well obey the docs, as well
as prepare callers that might deal with older clients to not be
surprised if the docs are not strictly followed.
For consistency, this patch fixes the code for all drivers,
even though it only makes an impact for vbox and for local
drivers. By fixing all drivers, future copy and paste from
a remote driver to a local driver is less likely to
reintroduce the bug.
Finally, update the testsuite to gain some coverage of the
issue for local drivers, including the first test of old-style
domain event registration via function pointer instead of
event id.
* src/libvirt.c (virConnectDomainEventRegister)
(virConnectDomainEventDeregister)
(virConnectDomainEventDeregisterAny): Clarify docs.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventDeregister)
(libxlConnectDomainEventDeregisterAny): Match documentation.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventDeregister)
(lxcConnectDomainEventDeregisterAny): Likewise.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventDeregister)
(testConnectDomainEventDeregisterAny)
(testConnectNetworkEventDeregisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventDeregister)
(umlConnectDomainEventDeregisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister)
(vboxConnectDomainEventDeregister)
(vboxConnectDomainEventDeregisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventDeregister)
(xenUnifiedConnectDomainEventDeregisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventDeregisterAny): Likewise.
* tests/objecteventtest.c (testDomainCreateXMLOld): New test.
(mymain): Run it.
(testDomainCreateXML): Check return values.
Signed-off-by: Eric Blake <eblake@redhat.com>
While the public API & wire protocol included the 'detail'
arg for network lifecycle events, the internal event handling
code did not process it. This meant that if a future libvirtd
server starts sending non-0 'detail' args, the current libvirt
client will not process them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1035336
The basic problem is that during a network update, the required
iptables rules sometimes change, and this was being handled by simply
removing and re-adding the rules. However, the removal of the old
rules was done based on the *new* state of the network, which would
mean that some of the rules would not match those currently in the
system, so the old rules wouldn't be removed.
This patch removes the old rules prior to updating the network
definition then adds the new rules as soon as the definition is
updated. Note that this could lead to a stray packet or two during the
interim, but that was already a problem before (the period of limbo is
now just slightly longer).
While moving the location for the rules, I added a few more sections
that should result in the iptables rules being redone:
DHCP_RANGE and DHCP_HOST - these are needed because adding/removing a dhcp
host entry could lead to the dhcp service being started/stopped, which
would require that the mangle rule that fixes up dhcp response
checksums sould need to be added/removed, and this wasn't being done.
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/network/bridge_driver.c: Consistently use commas.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/storage/storage_backend_rbd.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1020135
If networkAllocateActualDevice() had failed due to a pool of hostdev
or direct devices being depleted, the calling function could still
call networkReleaseActualDevice() as part of its cleanup, and that
function would then unconditionally decrement the connections count
for the network, even though it hadn't been incremented (due to
failure of allocate). This *was* necessary because the .actual member
of the netdef was allocated with a "lazy" algorithm, only being
created if there was a need to store data there (e.g. if a device was
allocated from a pool, or bandwidth was allocated for the device), so
there was no simple way for networkReleaseActualDevice() to tell if
something really had been allocated (i.e. if "connections++" had been
executed).
This patch changes networkAllocateDevice() to *always* allocate an
actual device for any netdef of type='network', even if it isn't
needed for any other reason. This has no ill effects anywhere else in
the code (except for using a small amount of memory), and
networkReleaseActualDevice() can then determine if there was a
previous successful allocate by checking for .actual != NULL (if not,
it skips the "connections--").
Currently, we ignore whether dnsmasqCapsRefresh succeeds or fails. We
shouldn't do that as we may generate wrong dnsmasq command line (what
is done just a few lines below).
Signed-off-by: Hongwei Bi <hwbi2008@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Packets sent by guests on virbrN, *or* by dnsmasq on the same, to
- 255.255.255.255/32 (netmask-independent local network broadcast
address), or to
- 224.0.0.0/24 (local subnetwork multicast range)
are never forwarded, hence it is not necessary to masquerade them.
In fact we must not masquerade them: translating their source addresses or
source ports (where applicable) may confuse receivers on virbrN.
One example is the DHCP client in OVMF (= UEFI firmware for virtual
machines):
http://thread.gmane.org/gmane.comp.bios.tianocore.devel/1506/focus=2640
It expects DHCP replies to arrive from remote source port 67. Even though
dnsmasq conforms to that, the destination address (255.255.255.255) and
the source address (eg. 192.168.122.1) in the reply allow the UDP
masquerading rule to match, which rewrites the source port to or above
1024. This prevents the DHCP client in OVMF from accepting the packet.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=709418
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Useful to set custom forwarders instead of using the contents of
/etc/resolv.conf. It helps me to setup dnsmasq as local nameserver to
resolve VM domain names from domain 0, when domain option is used.
Signed-off-by: Diego Woitasen <diego.woitasen@vhgroup.net>
Signed-off-by: Eric Blake <eblake@redhat.com>
Similarly to qemu_driver.c, we can join often repeating code of looking
up network into one function: networkObjFromNetwork.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This resolves the issue that prompted the filing of
https://bugzilla.redhat.com/show_bug.cgi?id=928638
(although the request there is for something much larger and more
general than this patch).
commit f3868259ca disabled the
forwarding to upstream DNS servers of unresolved DNS requests for
names that had no domain, but were just simple host names (no "."
character anywhere in the name). While this behavior is frowned upon
by DNS root servers (that's why it was changed in libvirt), it is
convenient in some cases, and since dnsmasq can be configured to allow
it, it must not be strictly forbidden.
This patch restores the old behavior, but since it is usually
undesirable, restoring it requires specification of a new option in
the network config. Adding the attribute "forwardPlainNames='yes'" to
the <dns> elemnt does the trick - when that attribute is added to a
network config, any simple hostnames that can't be resolved by the
network's dnsmasq instance will be forwarded to the DNS servers listed
in the host's /etc/resolv.conf for an attempt at resolution (just as
any FQDN would be forwarded).
When that attribute *isn't* specified, unresolved simple names will
*not* be forwarded to the upstream DNS server - this is the default
behavior.
* Move platform specific things (e.g. firewalling and route
collision checks) into bridge_driver_platform
* Create two platform specific implementations:
- bridge_driver_linux: Linux implementation using iptables,
it's actually the code moved from bridge_driver.c
- bridge_driver_nop: dumb implementation that does nothing
Signed-off-by: Eric Blake <eblake@redhat.com>
This is another cleanup before extracting platform-specific
parts from bridge_driver.
Rename struct network_driver to _virNetworkDriverState and
add appropriate typedefs: virNetworkDriverState and
virNetworkDriverStatePtr.
This will help us to avoid potential problems when moving
this struct to the .h file.
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
iptablesContext holds only 4 pairs of iptables
(table, chain) and there's no need to pass
it around.
This is a first step towards separating bridge_driver.c
in platform-specific parts.
If networkUnplugBandwidth is called on a network which has
no bandwidth defined, print a warning instead of crashing.
This can happen when destroying a domain with bandwidth if
bandwidth was removed from the network after the domain was
started.
https://bugzilla.redhat.com/show_bug.cgi?id=975359
Although SRIOV network cards support setting a vlan tag on their
virtual functions, and although setting this vlan tag via a <vlan>
element in a domain's <interface> works, setting a vlan tag for these
devices in a <network> definition, or in a network <portgroup>
definition is also supposed to work (and the comment that validates
<vlan> usage even says that!). However, the check to allow it only
checked for an openvswitch network, so attempts to add <vlan> to a
network of type='hostdev' would fail.
This fixes the problem reported in:
https://bugzilla.redhat.com/show_bug.cgi?id=972690
When checking for a collision of a new libvirt network's subnet with
any existing routes, we read all of /proc/net/route into memory, then
parse all the entries. The function that we use to read this file
requires a "maximum length" parameter, which had previously been set
to 64*1024. As each line in /proc/net/route is 128 bytes, this would
allow for a maximum of 512 entries in the routing table.
This patch increases that number to 128 * 100000, which allows for
100,000 routing table entries. This means that it's possible that 12MB
would be allocated, but that would only happen if there really were
100,000 route table entries on the system, it's only held for a very
short time.
Since there is no method of specifying and unlimited max (and that
would create a potential denial of service anyway) hopefully this
limit is large enough to accomodate everyone.
In order to learn libvirt multiqueue several things must be done:
1) The '/dev/net/tun' device needs to be opened multiple times with
IFF_MULTI_QUEUE flag passed to ioctl(fd, TUNSETIFF, &ifr);
2) Similarly, '/dev/vhost-net' must be opened as many times as in 1)
in order to keep 1:1 ratio recommended by qemu and kernel folks.
3) The command line construction code needs to switch from 'fd=X' to
'fds=X:Y:...:Z' and from 'vhostfd=X' to 'vhostfds=X:Y:...:Z'.
4) The monitor handling code needs to learn to pass multiple FDs.
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
This should resolve https://bugzilla.redhat.com/show_bug.cgi?id=958907
Recent new addition of code to read/write active network state to the
NETWORK_STATE_DIR in the network driver broke startup for
qemu:///session. The network driver had several state file paths
hardcoded to /var, which could never possibly work in session mode.
This patch modifies *all* state files to use a variable string that is
set differently according to whether or not we're running
privileged. (It turns out that logDir was never used, so it's been
completely eliminated.)
There are very definitely other problems preventing dnsmasq and radvd
from running in non-privileged mode, but it's more consistent to have
the directories used by them be determined in the same fashion.
NB: I've noted before that the network driver is storing its state
(including dnsmasq and radvd state) in /var/lib, while qemu stores its
state in /var/run. It would probably have been better if the two
matched, but it's been this way for a long time, and changing it would
break running installations during an upgrade, so it's best to just
leave it as it is.
