QEMU process code in qemu_capabilities.c is moved to qemu_process.c in
order to make the code usable outside the original capabilities use
cases.
The moved code activates and manages QEMU processes without establishing
a guest domain.
This patch is a straight cut/paste move between files.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We want the signatures to be consistent, and also we're
going to start using the additional parameter next.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
QEMU plans to deprecate 'query-events' as it's non-extensible. Events
are also described by 'query-qmp-schema' so we can use that one instead.
This patch adds detection of events to
virQEMUCapsProbeQMPSchemaCapabilities using the same structure declaring
them for the old approach (virQEMUCapsEvents). This is possible as the
name is the same in the QMP schema and our detector supports that
trivially.
For any complex queries virQEMUCapsQMPSchemaQueries can be used in the
future.
For now we still call 'query-events' and discard the result so that it's
obvious that the tests pass. This will be cleaned up later.
https://bugzilla.redhat.com/show_bug.cgi?id=1673320
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).
QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit a4cda054e7 we are using 'ide-hd' and 'ide-cd' instead of
'ide-drive'. We also should probe capabilities for 'ide-hd' instead of
'ide-drive'. It is safe to do as 'ide-drive' is the common denominator
of both 'ide-hd' and 'ide-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit 02e8d0cfdf we are using 'scsi-hd' and 'scsi-cd' instead of
'scsi-disk'. We also should probe capabilities for 'scsi-hd' instead of
'scsi-disk'. It is safe to do as 'scsi-disk' is the common denominator
of both 'scsi-hd' and 'scsi-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It will not work. This breaks qemu capabilities probing as a user.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>). VIR_ONCE_GLOBAL_INIT is almost
exclusively called without an ending semicolon, but let's
standardize on using one like the other macros.
Add a dummy struct definition at the end of the macro, so
the compiler will require callers to add a semicolon.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is mainly about /dev/sev and its default permissions 0600. Of
course, rule of 'tinfoil' would be that we can't trust anything, but the
probing code in QEMU is considered safe from security's perspective + we
can't create an udev rule for this at the moment, because ioctls and
file system permissions aren't cross-checked in kernel and therefore a
user with read permissions could issue a 'privileged' operation on SEV
which is currently only limited to root.
https://bugzilla.redhat.com/show_bug.cgi?id=1665400
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virtio-mmio is still used by default, so if PCI is desired
it's necessary to explicitly opt-in by adding an appropriate
<address type='pci' domain='0x0000' ... />
element to the corresponding device.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'qemu' binary used to provide the i386 emulator until it was renamed
to qemu-system-i386 in QEMU 1.0. Since we don't support such old
versions we don't need to check for 'qemu' when probing capabilities.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the pmem
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce caching whether /dev/kvm is usable as the QEMU user:QEMU
group. This reduces the overhead of the QEMU capabilities cache
lookup. Before this patch there were many fork() calls used for
checking whether /dev/kvm is accessible. Now we store the result
whether /dev/kvm is accessible or not and we only need to re-run the
virFileAccessibleAs check if the ctime of /dev/kvm has changed.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.
In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.
With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to find the
author of a particular bit of code.
This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.
The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Support for nested KVM is handled via a kernel module configuration
parameters values for kvm_intel, kvm_amd, kvm_hv (PPC), or kvm (s390).
While it's possible to fetch the kmod config values via virKModConfig,
unfortunately that is the static value and we need to get the
current/dynamic value from the kernel file system.
So this patch adds a new API virHostKVMSupportsNesting that will
search the 3 kernel modules to get the nesting value and check if
it is 'Y' (or 'y' just in case) to return a true/false whether
the KVM kernel supports nesting.
We need to do this in order to handle cases where adjustments to
the value are made after libvirtd is started to force a refetch of
the latest QEMU capabilities since the correct CPU settings need
to be made for a guest to add the "vmx=on" to/for the guest config.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have QAPI introspection of display types in QEMU upstream,
we can check whether the 'rendernode' option is supported with
egl-headless display type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Support for armv6l qemu guests has been added.
Tested with arm1176 CPU on x86.
Signed-off-by: Stefan Schallenberg <infos@nafets.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add a capability check for IOThread polling (all were added at the
same time, so only one check is necessary).
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
with the only changes to include the more recent QEMU releases.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 3.1 should only expose the property if the host is actually
capable of creating hugetable-backed memfd. However, it may fail
at runtime depending on requested "hugetlbsize".
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU on s390 supports PCI multibus since forever.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Let's introduce zPCI capability.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce vfio-ap capability.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Chris Venteicher <cventeic@redhat.com>
It was already available in 1.5.0, so we can assume it's
present and avoid checking for it at runtime.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We already prefer them in capabilities, and domcapabilities
should be consistent with that.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The new implementation contains less duplicated code and
is easier to extend.
This commit is best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Now that we have reduced the number of sensible options down
to either the native QEMU binary or RHEL's qemu-kvm, we can
make virQEMUCapsInitGuest() a bit simpler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Both Fedora's qemu-kvm and Debian's/Ubuntu's kvm are nothing
more than paper-thin wrappers around the native QEMU binary,
so we gain nothing by looking for them.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We're only ever passing a single binary when calling this
function, so we can remove all code dealing with the
possibility of a second binary being specified.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When the guest is native, we are currently looking at
potential KVM binaries regardless of whether or not we have
already located a QEMU binary suitable to run the guest.
This made sense back when KVM support was not part of QEMU
proper, but these days the KVM binaries are in most cases
just trivial wrapper scripts around the native QEMU binary
so it doesn't make sense to poke at them unless they're
the only binaries on the system, such as when running on
RHEL.
This will allow us to simplify both virQEMUCapsInitGuest()
and virQEMUCapsInitGuestFromBinary().
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
When running an armv7l guest on an aarch64 hosts, the
qemu-system-aarch64 binary should be our first choice instead
of qemu-system-arm since the former can take advantage of KVM
acceleration.
Move the special case to virQEMUCapsFindBinaryForArch() so
that it's handled along with all other cases rather than on
its own later on.
Doing so will also make further refactoring easier.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
virCapabilitiesAddGuestDomain() takes an optional binary
name: this is intended for cases where a certain domain
type can't use the default one registered for the guest
architecture, but has to use a special binary instead.
The current code, however, will pass 'binary' again when
'kvmbin' is not defined, which is unnecessary as 'binary'
has been registered as default earlier, and will result
in capabilities output such as
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<domain type='qemu'/>
<domain type='kvm'>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
</domain>
with the second <emulator> element providing no additional
information.
Change it so that, when 'kvmbin' is not defined, NULL is
passed and so the default emulator will be used instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The function performing the checks, rather than its callers,
should contain comments explaining the rationale behind said
checks.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
There seems to be no need to add the ignore_value wrapper or
caste with (void) to the unlink() calls, so let's just remove
them. I assume at one point in time Coverity complained. So,
let's just be consistent - those that care to check the return
status can and those that don't can just have the naked unlink.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The file being present doesn't necessarily mean anything these
days, as it's created independently of whether the kvm module
has been loaded[1]; moreover, we're already gathering all the
information we need through QMP, so poking the filesystem at
all is entirely unnecessary.
[1] https://github.com/systemd/systemd/commit/d35d6249d5a7ed3228
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This capability is documented as having one meaning (whether
KVM is enabled by default) but is actually assigned two other
meanings over its life: whether the query-kvm QMP command is
available at first, and later on whether KVM is usable / was
used during probing.
Since the query-kvm QMP command was available in 1.5.0, we
can avoid probing for it; additionally, we can simplify the
logic by setting the flag when it applies instead of initially
setting it and then clearing it when it doesn't.
The flag's description is also updated to reflect reality.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
A side effect of recent changes is that we would always try
to regenerate the capabilities cache for non-native QEMU
binaries based on /dev/kvm availability, which is of course
complete nonsense. Make sure that doesn't happen.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
It was already available in 1.5.0.
Moreover, we're not even formatting it on the QEMU command
line, ever: we just use it as part of some logic that decides
whether KVM support should be advertised, and as it turns out
that logic is actually buggy and dropping this capability
fixes it.
https://bugzilla.redhat.com/show_bug.cgi?id=1628469
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
After removing the host CPU model re-computation,
this function is no longer necessary.
This reverts commits:
commit d0498881a0
virQEMUCapsFreeHostCPUModel: Don't always free host cpuData
commit 5276ec712a
testUpdateQEMUCaps: Don't leak host cpuData
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We require QEMU 1.5.0 these days, so checking for versions
older than that is pointless.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.5.0, which is our
minimum supported QEMU version these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability was introduced in QEMU 1.3.1 and we require
QEMU 1.5.0 these days.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous commits removed all capabilities from per-device property
probing for:
pci-assign
kvm-pci-assign
usb-host
scsi-generic
Remove them from the virQEMUCapsDeviceProps list and get rid of the
redundant device-list-properties QMP calls.
Note that 'pci-assign' was already useless, because the QMP version
of the device is called 'kvm-pci-assign', see libvirt commit 7257480
from 2012.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit 28b77657 in v1.0-rc4~21^2~8.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduced by QEMU commit c29029d which was included in 1.5.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the bootindex argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
At the time of the addition of 'pci-assign' in QEMU commit
v1.3.0-rc0~572^2 the configfd argument was already supported.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Added by commit fc66c1603c and not used since.
Also, the device was present in QEMU 1.5.0 so this capability
will not be needed if we ever decide to implement usb-net support.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Historically the argv -> xml convertor wanted the same default machine
as we'd set when parsing xml. The latter has now changed, however, to
use a default defined by libvirt. The former needs fixing to again
honour the default QEMU machine.
This exposed a bug in handling for the aarch64 target, as QEMU does not
define any default machine. Thus we should not having been accepting
argv without a -machine provided.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virQEMUCapsGetDefaultMachine() method doesn't get QEMU's default
machine any more, instead it gets the historical default that libvirt
prefers for each arch. Rename it, so that the old name can be used for
getting QEMU's default.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We don't honour the QEMU default machine type anymore, always using the
libvirt chosen default instead. The QEMU argv parser, however, will need
to know the exacty QEMU default, so we must record that info.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The capability was usable since qemu 1.3 so we can remove all the
detection code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
For versions where we can probe that the arguments are optional we can
perform the probing by a schema query rather than sending a separate
command to do so.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
With the current implementation, adding a new architecture
and not updating preferredMachines accordingly will not
cause a build failure, making it very likely that subtle
bugs will be introduced in the process. Rework the code
so that such issues will be caught by the compiler.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The capability currently is not enabled so that we can add individual
bits first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we're not saving the platform-specific data into a cache, we're
not going to populate the structure, which in turn will cause a crash
upon calling virNodeGetSEVInfo because of a NULL pointer dereference.
Ultimately, we should start caching this data along with host-specific
capabilities like NUMA and SELinux stuff into a separate cache, but for
the time being, this is a semi-proper fix for a potential crash.
Backtrace (requires libvirtd restart to load qemu caps from cache):
#0 qemuGetSEVInfoToParams
#1 qemuNodeGetSEVInfo
#2 virNodeGetSEVInfo
#3 remoteDispatchNodeGetSevInfo
#4 remoteDispatchNodeGetSevInfoHelper
#5 virNetServerProgramDispatchCall
#6 virNetServerProgramDispatch
#7 virNetServerProcessMsg
#8 virNetServerHandleJob
#9 virThreadPoolWorker
#10 virThreadHelper
https: //bugzilla.redhat.com/show_bug.cgi?id=1612009
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
So the procedure to detect SEV support works like this:
1) we detect that sev-guest is among the QOM types and set the cap flag
2) we probe the monitor for SEV support
- this is tricky, because QEMU with compiled SEV support will always
report -object sev-guest and query-sev-capabilities command, that
however doesn't mean SEV is supported
3) depending on what the monitor returned, we either keep or clear the
capability flag for SEV
Commit a349c6c21c added an explicit check for "GenericError" in the
monitor reply to prevent libvirtd to spam logs about missing
'query-sev-capabilities' command. At the same time though, it returned
success in this case which means that we didn't clear the capability
flag afterwards and happily formatted SEV into qemuCaps. Therefore,
adjust all the relevant callers to handle -1 on errors, 0 on SEV being
unsupported and 1 on SEV being supported.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Keep with the recent effort of replacing as many explicit *Free
functions with their automatic equivalents.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
The field was added in qemu v0.13.0-rc0-731-g1ca4d09ae0 so all supported
qemu versions now use it.
There's a LOT of test fallout as we did not use capabilities close
enough to upstream for many of our tests.
Several tests had a 'bootindex' variant. Since they'd become redundant
they are also removed here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is increasingly likely that some distro is going to change the
default "x86" machine type in QEMU from "pc" to "q35". This will
certainly break existing applications which write their XML on the
assumption that it is using a "pc" machine by default. For example they'll
lack a IDE CDROM and get PCIe instead of PCI which changes the topology
radically.
Libvirt promises to isolate applications from hypervisor changes that
may cause incompatibilities, so we must ensure that we always use the
"pc" machine type if it is available. Only use QEMU's own reported
default machine type if "pc" does not exist.
This issue is not x86-only, other arches are liable to change their
default machine, while some arches don't report any default at all
causing libvirt to pick the first machine in the list. Thus to
guarantee stability to applications, declare a preferred default
machine for all architectures we currently support with QEMU.
Note this change assumes there will always be a "pc" alias as long as a
versioned "pc-XXX" machine type exists. If QEMU were to ship a "pc-XXX"
machine type but not provide the "pc" alias, it is too hard to decide
which to default so. Versioned machine types are supposed to be
considered opaque strings, so we can't apply any sensible ordering
ourselves and QEMU isn't reporting the list of machines in any sensible
ordering itself.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU 2.12 introduced a new vfio-pci device option 'display=on/off/auto'.
This patch introduces the necessary capability.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since QEMU 2.10, it's possible to use a new type of display -
egl-headless which uses drm nodes to provide OpenGL support. This patch
adds a capability for that. However, since QEMU doesn't provide a QMP
command to probe it, we have to base the capability on specific QEMU
version.
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Support for specifying it with the -device frontend was added recently.
Add a capability for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is only used in one place.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Extend hypervisor capabilities to include sev feature. When available,
hypervisor supports launching an encrypted VM on AMD platform. The
sev feature tag provides additional details like Platform Diffie-Hellman
(PDH) key and certificate chain which can be used by the guest owner to
establish a cryptographic session with the SEV firmware to negotiate
keys used for attestation or to provide secret during launch.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
QEMU version >= 2.12 provides support for launching an encrypted VMs on
AMD x86 platform using Secure Encrypted Virtualization (SEV) feature.
This patch adds support to query the SEV capability from the qemu.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
For getting the reply I queried the newest and oldest QEMU using
test/qemucapsprobe. From the differences I only extracted the reply to the new
QMP command and discarded the rest. For all the versions below the one which
added support for the new option I used the output from the oldest QEMU release
and for those that support it I used the output from the newest one.
In order to make doubly sure the reply is where it is supposed to be (the
replies files are very forgiving) I added the property to all the replies files,
reran the tests again and fixed the order in replies files so that all the
versions are reporting the new capability. Then removed that one property.
After that I used test/qemucapsfixreplies to fix the reply IDs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are still hoping all of such checks will be moved there and this is one small
step in that direction.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To avoid problems with test cases specifying an alias machine type which
would change once capabilities for a newer version are added strip all
alias machine types for the DO_TEST_CAPS_LATEST based tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extend the QEMU capabilities with tpm-emulator support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function exists because of 5276ec712a. But it is
missing initial check just like virQEMUCapsInitHostCPUModel()
has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt called bind() and listen() on the UNIX socket, it is
guaranteed that connect() will immediately succeed, if QEMU is running
normally. It will only fail if QEMU has closed the monitor socket by
mistake or if QEMU has exited, letting the kernel close it.
With this in mind we can remove the retry loop and timeout when
connecting to the QEMU monitor if we are doing FD passing. Libvirt can
go straight to sending the QMP greeting and will simply block waiting
for a reply until QEMU is ready.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU >= 2.12 will support passing of pre-opened file descriptors for
socket based character devices.
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When preparing qemuCaps for test cases the following is
happening:
qemuTestParseCapabilitiesArch() is called, which calls
virQEMUCapsLoadCache() which in turn calls
virQEMUCapsInitHostCPUModel() which sets qemuCaps->kvmCPU and
qemuCaps->tcgCPU.
But then the code tries to update the capabilities:
testCompareXMLToArgv() calls testUpdateQEMUCaps() which calls
virQEMUCapsInitHostCPUModel() again overwriting previously
allocated memory. The solution is to free host cpuData in
testUpdateQEMUCaps().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
