Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
Commit b9dd878f (util: make it easier to grab only regular command exit)
changed the call semantics of virCommandRun() and therefore of virRun()
too. But lxcCheckNetNsSupport() was not updated.
As consequence of this lxcCheckNetNsSupport always failed and broke LXC.
Signed-off-by: Richard Weinberger <richard@nod.at>
Now that we ditched our custom pthread impl for Win32, we can
use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids
the need to use a virOnce one-time global initializer in a
number of places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
message in both cases).
Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.
Currently, the Linux kernel treats values of '0' and '1' as
the minimum of 2. Values larger than the maximum are changed
to the maximum.
Re-reading the shares value after setting it reflects this in
the live domain XML.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/lxc/lxc_cgroup.c (virLXCCgroupSetupDeviceACL): Use
accessors.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceDiskLive)
(lxcDomainDetachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).
To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).
virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.
This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
Change any variable names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This function is needed for user namespaces, where we need to chmod()
the cgroup to the initial uid/gid such that systemd is allowed to
use the cgroup.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.
While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupXXX APIs' return value must be checked for
being less than 0, not equal to 0.
An VIR_ERR_OPERATION_INVALID error must also be raised
when the VM is not running to prevent a crash on NULL
priv->cgroup field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Destroying a suspended domain needs special action.
We cannot simply terminate all process because they are frozen.
Do deal with that we send them SIGKILL and thaw them.
Upon wakeup the process sees the pending signal and dies immediately.
Signed-off-by: Richard Weinberger <richard@nod.at>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite multiple hotunplug functions to to use the
virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with an absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevMiscLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevStorageLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevSubsysUSBLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceDiskLive function to use the
virProcessRunInMountNamespace helper. This avoids risk of
a malicious guest replacing /dev with a absolute symlink,
tricking the driver into changing the host OS filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use helper virProcessRunInMountNamespace in lxcDomainShutdownFlags and
lxcDomainReboot. Otherwise, a malicious guest could use symlinks
to force the host to manipulate the wrong file in the host's namespace.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Eric Blake <eblake@redhat.com>
The check for whether the cgroup devices ACL is available is
done quite late during LXC hotplug - in fact after the device
node is already created in the container in some cases. Better
to do it upfront so we fail immediately.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC disk hotplug code was allowing block or character devices
to be given as disk. A disk is always a block device.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When detaching a USB device from an LXC guest we must remove
the device from the cgroup ACL. Unfortunately we were telling
the cgroup code to use the guest /dev path, not the host /dev
path, and the guest device node had already been unlinked.
This was, however, fortunate since the code passed &priv->cgroup
instead of priv->cgroup, so would have crash if the device node
were accessible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After hotplugging a USB device, the LXC driver forgot
to add the device def to the virDomainDefPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC code missed the 'usb' component out of the path
/dev/bus/usb/$BUSNUM/$DEVNUM, so it failed to actually
setup cgroups for the device. This was in fact lucky
because the call to virLXCSetupHostUsbDeviceCgroup
was also mistakenly passing '&priv->cgroup' instead of
just 'priv->cgroup'. So once the path is fixed, libvirtd
would then crash trying to access the bogus virCgroupPtr
pointer. This would have been a security issue, were it
not for the bogus path preventing the pointer reference
being reached.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The problem with VLAN is that the user still has to manually create the
vlan interface on the host. Then the generated configuration will use
it as a nerwork hostdev device. So the generated configurations of the
following two fragments are equivalent (see rhbz#1059637).
lxc.network.type = phys
lxc.network.link = eth0.5
lxc.network.type = vlan
lxc.network.link = eth0
lxc.network.vlan.id = 5
Some of the LXC configuration properties aren't migrated since they
would only cause problems in libvirt-lxc:
* lxc.network.ipv[46]: LXC driver doesn't setup IP address of guests,
see rhbz#1059624
* lxc.network.name, see rhbz#1059630
If no network configuration is provided, LXC only provides the loopback
interface. To match this, we need to use the privnet feature. LXC will
also define a 'none' network type in its 1.0.0 version that fits
libvirt LXC driver's default.
LXC rootfs can be either a directory or a block device or an image
file. The first two types have been implemented, but the image file is
still to be done since LXC auto-guesses the file format at mount time
and the LXC driver doesn't support the 'auto' format.
This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.
Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config
It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.
fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.
As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains about default: label in libxl_driver.c not be able
to be reached. It's by design for the code and since it's not necessary
in the code nor does it elicit any compiler/make check warnings - just
remove it rather than adding a coverity[dead_error_begin] tag.
While I'm at it, lxc_driver.c and nodeinfo.c have the same design, so I
removed the default labels and the existing coverity tags.
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I noticed that we allow virDomainGetVcpusFlags even for read-only
connections, but that with a flag, it can require guest agent
interaction. It is feasible that a malicious guest could
intentionally abuse the replies it sends over the guest agent
connection to possibly trigger a bug in libvirt's JSON parser,
or withhold an answer so as to prevent the use of the agent
in a later command such as a shutdown request. Although we
don't know of any such exploits now (and therefore don't mind
posting this patch publicly without trying to get a CVE assigned),
it is better to err on the side of caution and explicitly require
full access to any domain where the API requires guest interaction
to operate correctly.
I audited all commands that are marked as conditionally using a
guest agent. Note that at least virDomainFSTrim is documented
as needing a guest agent, but that such use is unconditional
depending on the hypervisor (so the existing domain:fs_trim ACL
should be sufficient there, rather than also requirng domain:write).
But when designing future APIs, such as the plans for obtaining
a domain's IP addresses, we should copy the approach of this patch
in making interaction with the guest be specified via a flag, and
use that flag to also require stricter access checks.
* src/libvirt.c (virDomainGetVcpusFlags): Forbid guest interaction
on read-only connection.
(virDomainShutdownFlags, virDomainReboot): Improve docs on agent
interaction.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS, REMOTE_PROC_DOMAIN_REBOOT)
(REMOTE_PROC_DOMAIN_SHUTDOWN_FLAGS): Require domain:write for any
conditional use of a guest agent.
* src/xen/xen_driver.c: Fix clients.
* src/libxl/libxl_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch,user can set throttle blkio cgroup for
lxc domain through virsh tool.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,
we can use these interfaces to set up throttle
blkio cgroup for domain.
This patch also adds the new throttle blkio cgroup
elements to the test xml.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The public virConnectRef and virConnectClose API are just thin
wrappers around virObjectRef/virObjectRef, with added object
validation and an error reset. Within our backend drivers, use
of the object validation is just an inefficiency since we always
pass valid objects. More important to think about is what
happens with the error reset; our uses of virConnectRef happened
to be safe (since we hadn't encountered any earlier errors), but
in several cases the use of virConnectClose could lose a real
error.
Ideally, we should also avoid calling virConnectOpen() from
within backend drivers - but that is a known situation that
needs much more design work.
* src/qemu/qemu_process.c (qemuProcessReconnectHelper)
(qemuProcessReconnect): Avoid nested public API call.
* src/qemu/qemu_driver.c (qemuAutostartDomains)
(qemuStateInitialize, qemuStateStop): Likewise.
* src/qemu/qemu_migration.c (doPeer2PeerMigrate): Likewise.
* src/storage/storage_driver.c (storageDriverAutostart):
Likewise.
* src/uml/uml_driver.c (umlAutostartConfigs): Likewise.
* src/lxc/lxc_process.c (virLXCProcessAutostartAll): Likewise.
(virLXCProcessReboot): Likewise, and avoid leaking conn on error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since ACL filtering was added in commit 7639736 (v1.1.1), a
user could still use event registration to obtain access to a
domain that they could not normally access via virDomainLookup*
or virConnectListAllDomains and friends. We already have the
framework in the RPC generator for creating the filter, and
previous cleanup patches got us to the point that we can now
wire the filter through the entire object event stack.
Furthermore, whether or not domain:getattr is honored, use of
global events is a form of obtaining a list of networks, which
is covered by connect:search_domains added in a93cd08 (v1.1.0).
Ideally, we'd have a way to enforce connect:search_domains when
doing global registrations while omitting that check on a
per-domain registration. But this patch just unconditionally
requires connect:search_domains, even when no list could be
obtained, based on the following observations:
1. Administrators are unlikely to grant domain:getattr for one
or all domains while still denying connect:search_domains - a
user that is able to manage domains will want to be able to
manage them efficiently, but efficient management includes being
able to list the domains they can access. The idea of denying
connect:search_domains while still granting access to individual
domains is therefore not adding any real security, but just
serves as a layer of obscurity to annoy the end user.
2. In the current implementation, domain events are filtered
on the client; the server has no idea if a domain filter was
requested, and must therefore assume that all domain event
requests are global. Even if we fix the RPC protocol to
allow for server-side filtering for newer client/server combos,
making the connect:serach_domains ACL check conditional on
whether the domain argument was NULL won't benefit older clients.
Therefore, we choose to document that connect:search_domains
is a pre-requisite to any domain event management.
Network events need the same treatment, with the obvious
change of using connect:search_networks and network:getattr.
* src/access/viraccessperm.h
(VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS)
(VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional
effect of the permission.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Add new parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event.c (_virObjectEventCallback): Track a filter.
(virObjectEventDispatchMatchCallback): Use filter.
(virObjectEventCallbackListAddID): Register filter.
* src/conf/domain_event.c (virDomainEventFilter): New function.
(virDomainEventStateRegister, virDomainEventStateRegisterID):
Adjust callers.
* src/conf/network_event.c (virNetworkEventFilter): New function.
(virNetworkEventStateRegisterID): Adjust caller.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY)
(REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a
filter, and require connect:search_domains instead of weaker
connect:read.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventRegisterAny)
(testConnectNetworkEventRegisterAny): Update callers.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventRegisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventRegisterAny): Likewise.
* src/qemu/qemu_driver.c (qemuConnectDomainEventRegister)
(qemuConnectDomainEventRegisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
the unix socket /var/run/libvirt/lxc/domain.sock is not created
under the selinux context which configured by <seclabel>.
If we try to connect the domain.sock under the selinux context
of domain in virtLXCProcessConnectMonitor,selinux will deny
this connect operation.
type=AVC msg=audit(1387953696.067:662): avc: denied { connectto } for pid=21206 comm="libvirtd" path="/usr/local/var/run/libvirt/lxc/systemd.sock" scontext=unconfined_u:system_r:svirt_lxc_net_t:s0:c770,c848 tcontext=unconfined_u:system_r:unconfined_t:s0-s0:c0.c1023 tclass=unix_stream_socket
fix this problem by creating socket under selinux context of domain.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The @name variable is VIR_STRDUP()-ed into, but never freed. In fact,
there's no need to duplicate a command line argument since all places
where @name is used expect const char.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ever since their introduction (commit 1509b80 in v0.5.0 for
virConnectDomainEventRegister, commit 4445723 in v0.8.0 for
virConnectDomainEventDeregisterAny), the event deregistration
functions have been documented as returning 0 on success;
likewise for older registration (only the newer RegisterAny
must return a non-zero callbackID). And now that we are
adding virConnectNetworkEventDeregisterAny for v1.2.1, it
should have the same semantics.
Fortunately, all of the stateful drivers have been obeying
the docs and returning 0, thanks to the way the remote_driver
tracks things (in fact, the RPC wire protocol is unable to
send a return value for DomainEventRegisterAny, at least not
without adding a new RPC number). Well, except for vbox,
which was always failing deregistration, due to failure to
set the return value to anything besides its initial -1.
But for local drivers, such as test:///default, we've been
returning non-zero numbers; worse, the non-zero numbers have
differed over time. For example, in Fedora 12 (libvirt 0.8.2),
calling Register twice would return 0 and 1 [the callbackID
generated under the hood]; while in Fedora 20 (libvirt 1.1.3),
it returns 1 and 2 [the number of callbacks registered for
that event type]. Since we have changed the behavior over
time, and since it differs by local vs. remote, we can safely
argue that no one could have been reasonably relying on any
particular behavior, so we might as well obey the docs, as well
as prepare callers that might deal with older clients to not be
surprised if the docs are not strictly followed.
For consistency, this patch fixes the code for all drivers,
even though it only makes an impact for vbox and for local
drivers. By fixing all drivers, future copy and paste from
a remote driver to a local driver is less likely to
reintroduce the bug.
Finally, update the testsuite to gain some coverage of the
issue for local drivers, including the first test of old-style
domain event registration via function pointer instead of
event id.
* src/libvirt.c (virConnectDomainEventRegister)
(virConnectDomainEventDeregister)
(virConnectDomainEventDeregisterAny): Clarify docs.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventDeregister)
(libxlConnectDomainEventDeregisterAny): Match documentation.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventDeregister)
(lxcConnectDomainEventDeregisterAny): Likewise.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventDeregister)
(testConnectDomainEventDeregisterAny)
(testConnectNetworkEventDeregisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventDeregister)
(umlConnectDomainEventDeregisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister)
(vboxConnectDomainEventDeregister)
(vboxConnectDomainEventDeregisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventDeregister)
(xenUnifiedConnectDomainEventDeregisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventDeregisterAny): Likewise.
* tests/objecteventtest.c (testDomainCreateXMLOld): New test.
(mymain): Run it.
(testDomainCreateXML): Check return values.
Signed-off-by: Eric Blake <eblake@redhat.com>
The libvirt_internal.h header was included by the internal.h header.
This made it painful to add new stuff to the header file that would
require some more specific types. Remove inclusion by internal.h and add
it to appropriate places manually.
This reverts commit aa4619337c.
This patch was accidentally pushed prematurely, and has incorrect
logic for which shutdown methods to attempt.
Signed-off-by: Eric Blake <eblake@redhat.com>
We weren't very consistent in our use of VIR_ERR_NO_SUPPORT; many
users just passed __FUNCTION__ on, while others passed "%s" to
silence over-eager compilers that warn about __FUNCTION__ not
containing any %. It's nicer to route all these uses through
a single macro, so that if we ever need to change the reporting,
we can do it in one place.
I verified that 'virsh -c test:///default qemu-monitor-command test foo'
gives the same error message before and after this patch:
error: this function is not supported by the connection driver: virDomainQemuMonitorCommand
Note that in libvirt.c, we were inconsistent on whether virDomain*
API used virLibConnError() (with VIR_FROM_NONE) or virLibDomainError()
(with VIR_FROM_DOMAIN); this patch unifies these errors to all use
VIR_FROM_NONE, on the grounds that it is unlikely that a caller
learning that a call is unimplemented can do anything in particular
with extra knowledge of which error domain it belongs to.
One particular change to note is virDomainOpenGraphics which was
trying to fail with VIR_ERR_NO_SUPPORT after a failed
VIR_DRV_SUPPORTS_FEATURE check; all other places that fail a
feature check report VIR_ERR_ARGUMENT_UNSUPPORTED.
* src/util/virerror.h (virReportUnsupportedError): New macro.
* src/libvirt-qemu.c: Use new macro.
* src/libvirt-lxc.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/security/security_manager.c: Likewise.
* src/util/virinitctl.c: Likewise.
* src/libvirt.c: Likewise.
(virDomainOpenGraphics): Use correct error for unsupported feature.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, the @flags usage is a bit unclear at first sight to say the
least. There's no need for such unclear code especially when we can
borrow the working code from qemuDomainShutdownFlags().
In addition, this fixes one bug too. If user requested both
VIR_DOMAIN_SHUTDOWN_INITCTL and VIR_DOMAIN_SHUTDOWN_SIGNAL at the same
time, he is basically saying: 'Use the force Luke! If initctl fails try
sending a signal.' But with the current code we don't do that. If
initctl fails for some reason (e.g. inability to write to /dev/initctl)
we don't try sending any signal but fail immediately. To make things
worse, making a domain shutdown with bare _SIGNAL was working by blind
chance of a @rc variable being placed at correct place on the stack so
its initial value was zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain> --hard-limit 133T'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
#1 0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
at util/vircgroup.c:669
#2 0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
#3 0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
#4 0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
at util/vircgroup.c:1944
#5 0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
#6 0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
#7 0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
at remote_dispatch.h:7621
#8 0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
ret=0x7fffe40b84f0) at remote_dispatch.h:7591
#9 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:435
#10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:305
#11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
#12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain>'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
#1 0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
#2 0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
#3 0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
at util/vircgroup.c:1962
#4 0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
#5 0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
#6 0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote.c:1895
#7 0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote_dispatch.h:4050
#8 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:435
#9 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:305
#10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
#11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.
http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, if virFileMakePath() fails, the @ret is left initialized from
virAsprintf() just a few lines above leading to a wrong return value of
zero whereas -1 should be returned.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When setting up filesystems backed by block devices or file
images, the SELinux mount options must be used to ensure the
correct context is set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Also after commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to umount the mounts that
inherited from parent mountns.
right now, I have no good idea to fix this problem, we need
to do more research. this patch just skip unmounting these
mounts for shared root.
BTW, I think when libvirt lxc enables user namespace, the
configuation that shares root with host is very rara.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
After kernel commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to move the mounts that
inherited from parent mountns. we use this feature to move
the /stateDir/domain-name.{dev, devpts} to the /dev/ and
/dev/pts directroy of container. this commit breaks libvirt lxc.
this patch changes the behavior to bind these mounts when
user namespace is enabled and move these mounts when user
namespace is disabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
