The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.
Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.
The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.
Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.
* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
src/opennebula/one_conf.c, src/opennebula/one_conf.h,
src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
to OpenNebula
* docs/drvone.html.in: Delete file
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions
* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/vmware/vmware_driver.c, src/xen/xen_driver.c,
src/libxl/libxl_driver.c: Stub new API
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0. The driver is stateful and runs
privileged only.
Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI. Driver selection is based on the status
of xend. If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified. If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.
V6:
- Address several code style issues noted by Daniel Veillard
- Make drive work with xen:/// URI
- Hold domain object reference while domain is injected in
libvirt event loop. Race found and fixed by Markus Groß.
V5:
- Ensure events are unregistered when domain private data
is destroyed. Discovered and fixed by Markus Groß.
V4:
- Handle restart of libvirtd, reconnecting to previously
started domains
- Rebased to current master
- Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)
V3:
- Reserve vnc port within driver when autoport=yes
V2:
- Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
- Rebased to current master
- Plug memory leaks found by Stefano Stabellini and valgrind
- Handle SHUTDOWN_crash domain death event
[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
* Correct the documentation for cgroup: the swap_hard_limit indicates
mem+swap_hard_limit.
* Change cgroup private apis to: virCgroupGet/SetMemSwapHardLimit
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED uses INT64_MAX but stdint.h
was not and should not be included. Therefore, libvirt.h was
not self-contained.
Instead of including stdint.h specify the value directly.
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Not all applications have an existing event loop they need
to integrate with. Forcing them to implement the libvirt
event loop integration APIs is an undue burden. This just
exposes our simple poll() based implementation for apps
to use. So instead of calling
virEventRegister(....callbacks...)
The app would call
virEventRegisterDefaultImpl()
And then have a thread somewhere calling
static bool quit = false;
....
while (!quit)
virEventRunDefaultImpl()
* daemon/libvirtd.c, tools/console.c,
tools/virsh.c: Convert to public event loop APIs
* include/libvirt/libvirt.h.in, src/libvirt_private.syms: Add
virEventRegisterDefaultImpl and virEventRunDefaultImpl
* src/util/event.c: Implement virEventRegisterDefaultImpl
and virEventRunDefaultImpl using poll() event loop
* src/util/event_poll.c: Add full error reporting
* src/util/virterror.c, include/libvirt/virterror.h: Add
VIR_FROM_EVENTS
The new virConnectGetSysinfo() API allows one to get the system
information associated to a connection host, providing the same
data as a guest that uses <os><smbios mode='host'/></os>, and in
a format that can be pasted into the guest and edited when using
<os><smbios mode='sysinfo'/></os>.
* include/libvirt/libvirt.h.in (virConnectGetSysinfo): Declare.
* src/libvirt_public.syms: Export new symbol.
Currently users who want to use virDomainQemuMonitorCommand() API or
it's virsh equivalent has to use the same protocol as libvirt uses for
communication to qemu. Since the protocol is QMP with current qemu and
HMP much more usable for humans, one ends up typing something like the
following:
virsh qemu-monitor-command DOM \
'{"execute":"human-monitor-command","arguments":{"command-line":"info kvm"}}'
which is not a very convenient way of debugging qemu.
This patch introduces --hmp option to qemu-monitor-command, which says
that the provided command is in HMP. If libvirt uses QMP to talk with
qemu, the command will automatically be converted into QMP. So the
example above is simplified to just
virsh qemu-monitor-command --hmp DOM "info kvm"
Also the result is converted from
{"return":"kvm support: enabled\r\n"}
to just plain HMP:
kvm support: enabled
If libvirt talks to qemu in HMP, --hmp flag is obviously a noop.
Display or set unlimited values for memory parameters. Unlimited is
represented by INT64_MAX in memory cgroup.
Signed-off-by: Nikunj A. Dadhania <nikunj@linux.vnet.ibm.com>
Reported-by: Justin Clift <jclift@redhat.com>
Fix glitch in commit cddd2a06 (thankfully post-0.8.6, so no
released version has the glitch).
Document and try to workaround glitch in commit 46e9b0f (in 0.8.0),
which invalidated 6 virErrorNumber values dating as far back as 0.7.1.
My audit did not find any other glitches until pre-0.1.0 days. I'm
not sure how to add a syntax-check off the top of my head, but
hopefully the explicit numbering will make people think twice about
renumbering in the future.
* include/libvirt/virterror.h (virErrorDomain): Avoid inserting
new values in the middle, and add explicit numbering to help avoid
this in the future.
(virErrorNumber): Add explicit numbering, and document the snafu.
* src/remote/remote_driver.c (remoteIO): Compensate for the snafu.
The nodeinfo structure includes
nodes : the number of NUMA cell, 1 for uniform mem access
sockets : number of CPU socket per node
cores : number of core per socket
threads : number of threads per core
which does not work well for NUMA topologies where each node does not
consist of integral number of CPU sockets.
We also have VIR_NODEINFO_MAXCPUS macro in public libvirt.h which
computes maximum number of CPUs as (nodes * sockets * cores * threads).
As a result, we can't just change sockets to report total number of
sockets instead of sockets per node. This would probably be the easiest
since I doubt anyone is using the field directly. But because of the
macro, some apps might be using sockets indirectly.
This patch leaves sockets to be the number of CPU sockets per node (and
fixes qemu driver to comply with this) on machines where sockets can be
divided by nodes. If we can't divide sockets by nodes, we behave as if
there was just one NUMA node containing all sockets. Apps interested in
NUMA should consult capabilities XML, which is what they probably do
anyway.
This way, the only case in which apps that care about NUMA may break is
on machines with funky NUMA topology. And there is a chance libvirt
wasn't able to start any guests on those machines anyway (although it
depends on the topology, total number of CPUs and kernel version).
Nothing changes at all for apps that don't care about NUMA.
introduce new public API "virDomainIsUpdated"
* src/conf/domain_conf.h (new member "updated" for "virDomainObj")
* src/libvirt_public.syms
* include/libvirt/libvirt.h.in
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.
This has been requested for RHEV:
https://bugzilla.redhat.com/show_bug.cgi?id=626305
v2: Change flag name, bool cleanups
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode
* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
error code for that module
* po/POTFILES.in: add new file for translations
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API
Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled
* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
API for auditing messages
API agreed on in
https://www.redhat.com/archives/libvir-list/2010-September/msg00456.html,
but modified for enum names to be consistent with virDomainDeviceModifyFlags.
* include/libvirt/libvirt.h.in (virDomainVcpuFlags)
(virDomainSetVcpusFlags, virDomainGetVcpusFlags): New
declarations.
* src/libvirt_public.syms: Export new symbols.
* include/libvirt/libvirt.h.in: some of the function type description
were broken so they could not be automatically documented
* src/util/event.c docs/apibuild.py: event.c exports one public API
so it needs to be scanned too, avoid a few warnings
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.
Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.
Update remote_protocol-structs to placate make syntax-check.
Undo unintended modifications in vboxDomainGetInfo.
Update the function table of the VirtualBox and XenAPI drivers.
This patch adds a structure virMemoryParameter, it contains the name of
the
parameter and the type of the parameter along with a union.
dv:
+ rename enums to VIR_DOMAIN_MEMORY_PARAM_*
+ remove some extraneous tabs
v4:
+ Add unsigned int flags to the public api for future extensions
v3:
+ Protoype for virDomainGetMemoryParameters and dummy python binding.
v2:
+ Includes dummy python bindings for the library to build cleanly.
+ Define string constants like "hard_limit", etc.
+ re-order this patch.
After the recent libvirt-qemu library addition, VPATH builds fail with:
CC libvirt_qemu_la-libvirt-qemu.lo
In file included from ../../src/libvirt-qemu.c:29:
../../include/libvirt/libvirt-qemu.h:17:22: error: libvirt.h: No such file or directory
...
CCLD libvirt-qmeu.la
/usr/bin/ld: cannot open linker script file libvirt_qemu.syms: No such file or directory
This fixes both issues (there are still some documentation VPATH issues,
but those don't show up with 'make check').
* configure.ac (LIBVIRT_QEMU_SYMBOL_FILE): While libvirt.syms is
generated and lives in $(builddir), libvirt_qemu.syms is static
and lives in $(srcdir).
* include/libvirt/libvirt-qemu.h (includes): Pull in libvirt.h via
the public location, since this is a public header.
Add the library entry point for the new virDomainQemuMonitorCommand()
entry point. Because this is not part of the "normal" libvirt API,
it gets its own header file, library file, and will eventually
get its own over-the-wire protocol later in the series.
Changes since v1:
- Go back to using the virDriver table for qemuDomainMonitorCommand, due to
linking issues
- Added versioning information to the libvirt-qemu.so
Changes since v2:
- None
Changes since v3:
- Add LGPL header to libvirt-qemu.c
- Make virLibConnError and virLibDomainError macros instead of function calls
Changes since v4:
- Move exported symbols to libvirt_qemu.syms
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Unfortunately the NWFilter functions were outside of the
"extern C { ... }" declaration in include/libvirt/libvirt.h.in,
which means that they couldn't be properly used with C++. Move
them inside of the braces, which should fix the problem.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).
I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling. I also verified that the fix doesn't
affect normal migration with shared storage.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
const char *reason,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
Some applications need to be able to query a guest's disk info,
even for paths not managed by the storage pool APIs. This adds
a very simple API to get this information, modelled on the
virStorageVolGetInfo API, but with an extra field 'physical'.
Normally 'physical' and 'allocation' will be identical, but
in the case of a qcow2-like file stored inside a block device
'physical' will give the block device size, while 'allocation'
will give the qcow2 image size
* include/libvirt/libvirt.h.in: Define virDomainGetBlockInfo
virDomainManagedSave() is to be run on a running domain. Once the call
complete, as in virDomainSave() the domain is stopped upon completion,
but there is no restore counterpart as any order to start the domain
from the API would load the state from the managed file, similary if
the domain is autostarted when libvirtd starts.
Once a domain has restarted his managed save image is destroyed,
basically managed save image can only exist for a stopped domain,
for a running domain that would be by definition outdated data.
* include/libvirt/libvirt.h.in src/libvirt.c src/libvirt_public.syms:
adds the new entry points virDomainManagedSave(),
virDomainHasManagedSaveImage() and virDomainManagedSaveRemove()
* src/driver.h src/esx/esx_driver.c src/lxc/lxc_driver.c
src/opennebula/one_driver.c src/openvz/openvz_driver.c
src/phyp/phyp_driver.c src/qemu/qemu_driver.c src/vbox/vbox_tmpl.c
src/remote/remote_driver.c src/test/test_driver.c src/uml/uml_driver.c
src/xen/xen_driver.c: add corresponding new internal drivers entry
points
When a watchdog/IO error occurs, one of the possible actions that
QEMU might take is to pause the guest. In this scenario libvirt
needs to update its internal state for the VM, and emit a
lifecycle event:
VIR_DOMAIN_EVENT_SUSPENDED
with a detail being one of:
VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
VIR_DOMAIN_EVENT_SUSPENDED_WATCHDOG
To future proof against possible QEMU support for multiple monitor
consoles, this patch also hooks into the 'STOPPED' event in QEMU
and emits a generic VIR_DOMAIN_EVENT_SUSPENDED_PAUSED event
* include/libvirt/libvirt.h.in: Add VIR_DOMAIN_EVENT_SUSPENDED_IOERROR
* src/qemu/qemu_driver.c: Update VM state to paused when IO error
or watchdog events occurrs
* src/qemu/qemu_monitor_json.c: Fix typo in disk IO event name
This flag is used in migration prepare step to send updated XML
definition of a guest.
Also ``virsh dumpxml --update-cpu [--inactive] guest'' command can be
used to see the updated CPU requirements.
This patch adds the implementation of the public API for the network
filtering (ACL) extensions to libvirt.c .
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This patch adds extensions to libvirt's public API necessary for
controlling the new functionality from remote for example.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
The current virDomainAttachDevice API can be (ab)used to change
the media of an existing CDROM/Floppy device. Going forward there
will be more devices that can be configured on the fly and overloading
virDomainAttachDevice for this is not too pleasant. This patch adds
a new virDomainUpdateDeviceFlags() explicitly just for modifying
existing devices.
* include/libvirt/libvirt.h.in: Add virDomainUpdateDeviceFlags
* src/driver.h: Internal API for virDomainUpdateDeviceFlags
* src/libvirt.c, src/libvirt_public.syms: Glue public API to
driver API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Add
stubs for new driver entry point
This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The reboot event is not a normal lifecycle event, since the
virtual machine on the host does not change state. Rather the
guest OS is resetting the virtual CPUs. ie, the QEMU process
does not restart. Thus, this does not belong in the current
lifecycle events callback.
This introduces a new event type
VIR_DOMAIN_EVENT_ID_REBOOT
It takes no parameters, besides the virDomainPtr, so it can
use the generic callback signature.
* daemon/remote.c: Dispatch reboot events to client
* examples/domain-events/events-c/event-test.c: Watch for
reboot events
* include/libvirt/libvirt.h.in: Define new reboot event ID
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle reboot events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for reboots and emit a libvirt reboot event
* src/remote/remote_driver.c: Receive and dispatch reboot
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
reboot events
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
The new virDomainAbortJob() method provides a way for a second
thread to abort an ongoing job run by another thread. This
extends to any API with which the virDomainGetJobInfo() API
is intended to work. Cancellation is not guarenteed, rather best
effort on part of the hypervisor and not required to be implmented.
* include/libvirt/libvirt.h.in: Define virDomainAbortJob()
Introduce a new public API that provides a way to get progress
info on currently running jobs on a virDomainpPtr. APIs that
are initially within scope of this idea are
virDomainMigrate
virDomainMigrateToURI
virDomainSave
virDomainRestore
virDomainCoreDump
These all take a potentially long time and benefit from monitoring.
The virDomainJobInfo struct allows for various pieces of information
to be reported
- Percentage completion
- Time
- Overall data
- Guest memory data
- Guest disk/file data
* include/libvirt/libvirt.h.in: Add virDomainGetJobInfo
* python/generator.py, python/libvirt-override-api.xml,
python/libvirt-override.c: Override for virDomainGetJobInfo API
* python/typewrappers.c, python/typewrappers.h: Introduce wrapper
for unsigned long long type
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
* include/libvirt/virterror.h src/util/virterror.c: add new domain
VIR_FROM_CPU for errors
* src/conf/cpu_conf.c src/conf/cpu_conf.h: new parsing module
* src/Makefile.am proxy/Makefile.am: include new files
* src/conf/capabilities.[ch] src/conf/domain_conf.[ch]: reference
new code
* src/libvirt_private.syms: private export of new entry points
This is trivial for QEMU since you just have to not stop the vm before
starting the dump. And for Xen, you just pass the flag down to xend.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): Add VIR_DUMP_LIVE.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Support live dumping.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support live dumping.
* tools/virsh.c (opts_dump): Add --live. (cmdDump): Map it to VIR_DUMP_LIVE.
This patch adds the --crash option (already present in "xm dump-core")
to "virsh dump". virDomainCoreDump already has a flags argument, so
the API/ABI is untouched.
* include/libvirt/libvirt.h.in (virDomainCoreDumpFlags): New flag for
CoreDump
* src/test/test_driver.c (testDomainCoreDump): Do not crash
after dump unless VIR_DUMP_CRASH is given.
* src/qemu/qemu_driver.c (qemudDomainCoreDump): Shutdown the domain
instead of restarting it if --crash is passed.
* src/xen/xend_internal.c (xenDaemonDomainCoreDump): Support --crash.
* tools/virsh.c (opts_dump): Add --crash.
(cmdDump): Map it to flags for virDomainCoreDump and pass them.
This adds a new flag, VIR_MIGRATE_PAUSED, that mandates pausing
the migrated VM before starting it.
* include/libvirt/libvirt.h.in (virDomainMigrateFlags): Add VIR_MIGRATE_PAUSED.
* src/qemu/qemu_driver.c (qemudDomainMigrateFinish2): Handle VIR_MIGRATE_PAUSED.
* tools/virsh.c (opts_migrate): Add --suspend. (cmdMigrate): Handle it.
* tools/virsh.pod (migrate): Document it.
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
* src/xen/xen_driver.c: Add support for VIR_MIGRATE_PERSIST_DEST flag
* src/xen/xend_internal.c: Add support for VIR_MIGRATE_UNDEFINE_SOURCE flag
* include/libvirt/virterror.h, src/util/virterror.c: Add new errorcode
VIR_ERR_MIGRATE_PERSIST_FAILED
Introduce a number of new APIs to expose some boolean properties
of objects, which cannot otherwise reliably determined, nor are
aspects of the XML configuration.
* virDomainIsActive: Checking virDomainGetID is not reliable
since it is not possible to distinguish between error condition
and inactive domain for ID of -1.
* virDomainIsPersistent: Check whether a persistent config exists
for the domain
* virNetworkIsActive: Check whether the network is active
* virNetworkIsPersistent: Check whether a persistent config exists
for the network
* virStoragePoolIsActive: Check whether the storage pool is active
* virStoragePoolIsPersistent: Check whether a persistent config exists
for the storage pool
* virInterfaceIsActive: Check whether the host interface is active
* virConnectIsSecure: whether the communication channel to the
hypervisor is secure
* virConnectIsEncrypted: whether any network based commnunication
channels are encrypted
NB, a channel can be secure, even if not encrypted, eg if it does
not involve the network, like a UNIX socket, or pipe.
* include/libvirt/libvirt.h.in: Define public API
* src/driver.h: Define internal driver API
* src/libvirt.c: Implement public API entry point
* src/libvirt_public.syms: Export API symbols
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/interface/netcf_driver.c, src/network/bridge_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c: Stub out driver tables
Some monitor commands may take a very long time to complete. It is
not desirable to block other incoming API calls forever. With this
change, if an existing API call is holding the job lock, additional
API calls will not wait forever. They will time out after a short
period of time, allowing application to retry later.
* include/libvirt/virterror.h, src/util/virterror.c: Add new
VIR_ERR_OPERATION_TIMEOUT error code
* src/qemu/qemu_driver.c: Change to a timed condition variable
wait for acquiring the monitor job lock
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in: Add
virSecretGetUsageType, virSecretGetUsageID and virLookupSecretByUsage
* python/generator.py: Mark virSecretGetUsageType, virSecretGetUsageID
as not throwing exceptions
* qemud/remote.c: Implement dispatch for virLookupSecretByUsage
* qemud/remote_protocol.x: Add usage type & ID as attributes of
remote_nonnull_secret. Add RPC calls for new public APIs
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.c, src/datatypes.h: Add usageType and usageID as
properties of virSecretPtr
* src/driver.h: Add virLookupSecretByUsage driver entry point
* src/libvirt.c: Implement virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/libvirt_public.syms: Export virSecretGetUsageType, virSecretGetUsageID
and virLookupSecretByUsage
* src/remote_internal.c: Implement virLookupSecretByUsage entry
* src/secret_conf.c, src/secret_conf.h: Remove the
virSecretUsageType enum, now in public API. Make volume
path mandatory when parsing XML
* src/secret_driver.c: Enforce usage uniqueness when defining secrets.
Implement virSecretLookupByUsage api method
* src/virsh.c: Include usage for secret-list command
Convert all the secret/storage encryption APIs / wire format to
handle UUIDs in raw format instead of non-canonical printable
format. Guarentees data format correctness.
* docs/schemas/storageencryption.rng: Make UUID mandatory for a secret
and validate fully
* docs/schemas/secret.rng: Fully validate UUID
* include/libvirt/libvirt.h, include/libvirt/libvirt.h.in, Add
virSecretLookupByUUID and virSecretGetUUID. Make
virSecretGetUUIDString follow normal API design pattern
* python/generator.py: Skip generation of virSecretGetUUID,
virSecretGetUUIDString and virSecretLookupByUUID
* python/libvir.c, python/libvirt-python-api.xml: Manual impl
of virSecretGetUUID,virSecretGetUUIDString and virSecretLookupByUUID
* qemud/remote.c: s/virSecretLookupByUUIDString/virSecretLookupByUUID/
Fix get_nonnull_secret/make_nonnull_secret to use unsigned char
* qemud/remote_protocol.x: Fix remote_nonnull_secret to use a
remote_uuid instead of remote_nonnull_string for UUID field.
Rename REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING to
REMOTE_PROC_SECRET_LOOKUP_BY_UUID_STRING and make it take an
remote_uuid value
* qemud/remote_dispatch_args.h, qemud/remote_dispatch_prototypes.h,
qemud/remote_dispatch_ret.h, qemud/remote_dispatch_table.h,
qemud/remote_protocol.c, qemud/remote_protocol.h: Re-generate
* src/datatypes.h, src/datatypes.c: Store UUID in raw format instead
of printable. Change virGetSecret to use raw format UUID
* src/driver.h: Rename virDrvSecretLookupByUUIDString to
virDrvSecretLookupByUUID and use raw format UUID
* src/libvirt.c: Add virSecretLookupByUUID and virSecretGetUUID
and re-implement virSecretLookupByUUIDString and
virSecretGetUUIDString in terms of those
* src/libvirt_public.syms: Add virSecretLookupByUUID and
virSecretGetUUID
* src/remote_internal.c: Rename remoteSecretLookupByUUIDString
to remoteSecretLookupByUUID. Fix typo in args for
remoteSecretDefineXML impl. Use raw UUID format for
get_nonnull_secret and make_nonnull_secret
* src/storage_encryption_conf.c, src/storage_encryption_conf.h:
Storage UUID in raw format, and require it to be present in
XML. Use UUID parser to validate.
* secret_conf.h, secret_conf.c: Generate a UUID if none is provided.
Storage UUID in raw format.
* src/secret_driver.c: Adjust to deal with raw UUIDs. Save secrets
in a filed with printable UUID, instead of base64 UUID.
* src/virsh.c: Adjust for changed public API contract of
virSecretGetUUIDString.
* src/storage_Backend.c: DOn't undefine secret we just generated
upon successful volume creation. Fix to handle raw UUIDs. Generate
a non-clashing UUID
* src/qemu_driver.c: Change to use lookupByUUID instead of
lookupByUUIDString
This implementation stores the secrets in an unencrypted text file,
for simplicity in implementation and debugging.
(Symmetric encryption, e.g. using gpgme, will not be difficult to add.
Because the TLS private key used by libvirtd is stored unencrypted,
encrypting the secrets file does not currently provide much additional
security.)
* include/libvirt/virterror.h, src/virterror.c (VIR_ERR_NO_SECRET): New
error number.
* po/POTFILES.in, src/Makefile.am: Add secret_driver.
* bootstrap: Use gnulib's base64 module.
* src/secret_driver.c, src.secret_driver.h, src/libvirt_private.syms:
Add local secret driver.
* qemud/qemud.c (qemudInitialize): Use the local secret driver.
* include/libvirt/virterror.h, src/virterror.c: Add VIR_WAR_NO_SECRET
* src/libvirt_private.syms, src/datatypes.h, src/datatypes.c: Type
virSecret struct definition and helper APIs
* src/driver.h: Sub-driver API definitions for secrets
* src/libvirt.c: Define new sub-driver for secrets
This patch adds a "secret" as a separately managed object, using a
special-purpose API to transfer the secret values between nodes and
libvirt users.
* docs/schemas/secret.rng, docs/schemas/Makefilem.am: Add new
schema for virSecret objects
* docs/*html: Re-generated
* docs/formatsecret.html.in, docs/sitemap.html.in: Add page
describing the virSecret XML schema
* include/libvirt/libvirt.h.in: Define the new virSecret public
API
* src/libvirt_public.syms: Export symbols for new public APIs
* mingw32-libvirt.spec.in, libvirt.spec.in: Add secret.rng to
files list
Features supported:
- Connects to HMC/VIOS or IVM systems.
- Life cycle commands (resume and shutdown).
- dumpxml
- 'list' and 'list --all'
What is being implemented:
- better and centralized control for UUID
- definexml
- CPU management commands
* src/domain_conf.c src/domain_conf.h: first version of the driver
* configure.in src/Makefile.am include/libvirt/virterror.h
src/domain_conf.[ch] src/libvirt.c src/virterror.c: glue the driver
in the general framework
* src/esx/esx_*.[ch]: the driver, uses a remote minimal SOAP client
to talk to the VI services on ESX nodes.
* configure.in include/libvirt/virterror.h src/Makefile.am src/driver.h
src/libvirt.c src/virterror.c: glue in the new driver
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in: adds the new
flag VIR_MEMORY_PHYSICAL for virDomainMemoryPeek
* src/libvirt.c: update the front-end checking
* src/qemu_driver.c: extend the QEmu driver
* include/libvirt/virterror.h src/virterror.c: if a driver's
virInterfaceLookupByMACString() function finds more than one interface
with the desired MAC Address, this new error is raised.
* include/libvirt/libvirt.h[.in]: adds signatures for the new exported
functions virConnectNumOfDefinedInterfaces and
virConnectListDefinedInterfaces
* src/libvirt_public.syms: export the new symbols
* src/opennebula/one_conf.[ch] src/opennebula/one_driver.[ch]:
the OpenNebula driver
* configure.in include/libvirt/virterror.h qemud/Makefile.am
qemud/qemud.c src/Makefile.am src/domain_conf.[ch] src/driver.h
src/libvirt.c src/virterror.c: integration of the OpenNebula
driver in the libvirt infrastructure
* AUTHORS: add Abel Miguez Rodriguez
daniel
