Two complaints of RESOURCE_FREE due to going to cleanup prior to a
VIR_FREE(line). Two complaints of FORWARD_NULL due to 'tmp' being
accessed after a strchr() without first checking if the return was NULL.
While looking at the code it seems that 'line' need only be allocated
once as the while loop will keep reading into line until eof causing
an unreported leak since line was never VIR_FREE()'d at the bottom of
the loop.
<hyperv>
<spinlocks state='off'/>
</hyperv>
results in:
error: XML error: missing HyperV spinlock retry count
Don't require retries when state is off and use virXPathUInt
instead of virXPathString to simplify parsing.
https://bugzilla.redhat.com/show_bug.cgi?id=784836#c19
Implement check whether (maximum) vCPUs doesn't exceed machine
type's cpu-max settings.
On older versions of QEMU the check is disabled.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Implicit controllers may be dependent on device definitions altered
in a post-parse callback. Specifically, if a console device is
defined without the target type, the type will be set in QEMU's
callback. In the case of s390, this is virtio, which requires
an implicit virtio-serial controller.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
For s390 the default console target type is virtio. This also requires
that an implicit virtio-serial controller is instantiated.
This testcase verifies that the target type of virtio is correctly set
in the generated XML if no target element was given and that the
corresponding virtio-serial element is generated too.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This includes adding it to the nodedev parser and formatter, docs, and
test.
An example of the new iommuGroup element that is a part of the output
from "virsh nodedev-dumpxml" (virNodeDeviceGetXMLDesc()):
<device>
<name>pci_0000_02_00_1</name>
<capability type='pci'>
...
<iommuGroup number='12'>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x0'/>
<address domain='0x0000' bus='0x02' slot='0x00' function='0x1'/>
</iommuGroup>
</capability>
</device>
commit 0fc12bca added a new test called qemuhotplugtest which has
several data files in tests/qemuhotplugtestdata, but didn't add that
directory to EXTRA_DIST in the tests Makefile.am, so the make check
done during a make rpm was failing due to missing data files.
As my punishment for the break in 7f15ebc7 (fixed in 752596b5dd) I'm
introducing this test to make sure it won't happen again. Currently,
only test for <graphics/> is supported.
This patch adds functionality to allow libvirt to configure the
'native-tagged' and 'native-untagged' modes on openvswitch networks.
Signed-off-by: Laine Stump <laine@redhat.com>
Add <features> and <compat> elements to volume target XML.
<compat> is a string which for qcow2 represents the QEMU version
it should be compatible with. Valid values are 0.10 and 1.1.
1.1 is implicit if the <features> element is present, otherwise
qemu-img default is used. 0.10 can be specified to explicitly
create older images after the qemu-img default changes.
<features> contains optional features, so far
<lazy_refcounts/> is available, which enables caching of reference
counters, improving performance for snapshots.
Currently, a listen address for a SPICE server can be specified. Later,
when the domain is migrated, we need to relocate the graphics which
involves telling new destination to the SPICE server. However, we can't
just assume the listen address is the new location, because the listen
address can be ANYCAST (0.0.0.0 for IPv4, :: for IPv6). In which case,
we want to pass the remote hostname. But there are some troubles with
ANYCAST. In both IPv4 and IPv6 it has many ways for specifying such
address. For instance, in IPv4: 0, 0.0, 0.0.0, 0.0.0.0. The number of
variations gets bigger in IPv6 world. Hence, in order to check for
ANYCAST address sanely, we should take the provided listen address,
parse it and format back in it's full form. Which is exactly what this
patch does.
If the creation of the commandline failed, libvirt always reported "out
of memory" from the virCommandToString function rather than the proper
error that happened in virStorageBackendCreateQemuImgCmd. Error out
earlier.
With unknown good reasons, the attribute "bus" of scsi device
address is always set to 0, same for attribute "target". (See
virDomainDiskDefAssignAddress).
Though we might need to change the algorithm to honor "bus"
and "target" too, that's a different issue. The address generator
for scsi host device in this patch just follows the unknown
good reasons, only considering the "controller" and "unit".
It walks through all scsi controllers and their units, to see
if the address $controller:0:0:$unit can be used (if not used
by any disk or scsi host device yet), if found one, it sits on
it, otherwise, it creates a new controller (actually the controller
is implicitly created by someone else), and sits on
$new_controller:0:0:0 instead.
A mingw build (where the qemu driver is not built, so WITH_QEMU
is undefined) failed with:
In file included from ../../src/qemu/qemu_command.h:30:0,
from ../../tests/testutilsqemu.h:4,
from ../../tests/networkxml2xmltest.c:14:
../../src/qemu/qemu_conf.h:53:4: error: #error "Port me"
But since testutilsqemu.c is already conditional, the header
should be likewise.
* tests/testutilsqemu.h: Make content conditional.
Signed-off-by: Eric Blake <eblake@redhat.com>
We can't use GNULIB's fprintf-posix due to licensing
incompatibilities. We do already have a portable
formatting via virAsprintf() which we got from GNULIB
though. We can use to create a virFilePrintf() function.
But really gnulib could just provide a 'fprintf'
module, that depended on just its 'asprintf' module.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It may shorten the code a bit as the following pattern:
VIR_STRNDUP(dst, src, cond ? n : strlen(src))
is used on several places among our code. However, we can
move the strlen into virStrndup and thus write just:
VIR_STRNDUP(dst, src, cond ? n : -1)
Currently, the controllers argument to virCgroupDetect acts both as
a result filter and a required controller specification, which is
a bit overloaded. If both functionalities are needed, it would be
better to have them seperated into a filter and a requirement mask.
The only situation where it is used today is to ensure that only
CPU related controllers are used for the VCPU directories. But here
we clearly do not want to enforce the existence of cpu, cpuacct and
specifically not cpuset at the same time.
This commit changes the semantics of controllers to "filter only".
Should a required mask ever be needed, more work will have to be done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This attribute is going to represent number of queues for
multique vhost network interface. This commit implements XML
extension part of the feature and add one test as well. For now,
we can only do xml2xml test as qemu command line generation code
is not adapted yet.
The shunloadStart function didn't check the status of virInitialize which
was flagged by Coverity. Adjust the function and shunloadtest in order
to handle the situation.
Since 0d70656afd, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
Running make check in a VPATH configured build directory fails
in fchosttest as the test data files are searched for relative to
the current working directory.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
QEMU might support more values for "-drive discard", so using Bi-state
values (on/off) for it doesn't make sense.
"on" maps to "unmap", "off" maps to "ignore":
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
The reason for it's not exposed for such long time is that the
enums for VirtioEventIdx and CopyOnReadType have same enum values
and Correspondingstrings. This fixes the bug and adds test.
The surest way to avoid regressions is to test documented behavior :)
* tests/virstringtest.c (testStrdup): New test case.
Signed-off-by: Eric Blake <eblake@redhat.com>
If the <sysinfo> system table 'uuid' field is improperly formatted,
then qemu will fail to start the guest with the error:
virsh start dom
error: Failed to start domain dom
error: internal error process exited while connecting to monitor: Invalid SMBIOS UUID string
This was because the parsing rules were lax with respect to allowing extraneous
spaces and dashes in the provided UUID. As long as there were 32 hexavalues
that matched the UUID for the domain the string was accepted. However startup
failed because the string format wasn't correct. This patch will adjust the
string format so that when it's presented to the driver it's in the expected
format.
Added a test for uuid comparison within sysinfo.
QEMU introduced "discard" option for drive since commit a9384aff53,
<...>
@var{discard} is one of "ignore" (or "off") or "unmap" (or "on") and
controls whether @dfn{discard} (also known as @dfn{trim} or @dfn{unmap})
requests are ignored or passed to the filesystem. Some machine types
may not support discard requests.
</...>
This patch exposes the support in libvirt.
QEMU supported "discard" for "-drive" since v1.5.0-rc0:
% git tag --contains a9384aff53
contains
v1.5.0-rc0
v1.5.0-rc1
So this only detects the capability bit using virQEMUCapsProbeQMPCommandLine.
Adding a VNC WebSocket support for QEMU driver. This functionality is
in upstream qemu from commit described as v1.3.0-982-g7536ee4, so the
capability is being recognized based on QEMU version for now.
QEMU introduced command line "-mem-merge=on|off" (defaults to on) to
enable/disable the memory merge (KSM) at guest startup. This exposes
it by new XML:
<memoryBacking>
<nosharepages/>
</memoryBacking>
The XML tag is same with what we used internally for old RHEL.
Files ending in -invalid.xml are expected to violate the
XML schema check. The RBD file does not so must have a
different filename.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The QEMU command line syntax for RBD disks is
file=rbd:pool/image:opt1=val1:opt2=val2...
There is no way to escape the ':' if it appears in the
pool or image name. Thus it must be explicitly forbidden
if it occurs in the libvirt XML. People are known to
be abusing the lack of escaping in current libvirt to
pass arbitrary args to QEMU.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Clang does not like it when you pass a static variable to an
inline function
vircgroupmock.c:462:22: error: static variable 'fakesysfsdir' is
used in an inline function with external linkage [-Werror,-Wstatic-in-inline]
Just make the var non-static to avoid this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ever since the conversion to using only QMP for probing features
of qemu 1.2 and newer, we have been unable to detect features
that are added only by additional command line options. For
example, we'd like to know if '-machine mem-merge=on' (added
in qemu 1.5) is present. To do this, we will take advantage
of qemu 1.5's query-command-line-parameters QMP call [1].
This patch wires up the framework for probing the command results;
if the QMP command is missing, or if a particular command line
option does not output any parameters (for example, -net uses
a polymorphic parser, which showed up as no parameters as of qemu
1.5), we silently treat that command as having no results.
[1] https://lists.gnu.org/archive/html/qemu-devel/2013-04/msg05180.html
* src/qemu/qemu_monitor.h (qemuMonitorGetOptions)
(qemuMonitorSetOptions)
(qemuMonitorGetCommandLineOptionParameters): New functions.
* src/qemu/qemu_monitor_json.h
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
* src/qemu/qemu_monitor.c (_qemuMonitor): Add cache field.
(qemuMonitorDispose): Clean it.
(qemuMonitorGetCommandLineOptionParameters): Implement new function.
* src/qemu/qemu_monitor_json.c
(qemuMonitorJSONGetCommandLineOptionParameters): Likewise.
(testQemuMonitorJSONGetCommandLineParameters): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
In an upcoming patch, I need the way to safely transfer a nested
virJSON object out of its parent container for independent use,
even after the parent is freed.
* src/util/virjson.h (virJSONValueObjectRemoveKey): New function.
(_virJSONObject, _virJSONArray): Use correct type.
* src/util/virjson.c (virJSONValueObjectRemoveKey): Implement it.
* src/libvirt_private.syms (virjson.h): Export it.
* tests/jsontest.c (mymain): Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
network: static route support for <network>
This patch adds the <route> subelement of <network> to define a static
route. the address and prefix (or netmask) attribute identify the
destination network, and the gateway attribute specifies the next hop
address (which must be directly reachable from the containing
<network>) which is to receive the packets destined for
"address/(prefix|netmask)".
These attributes are translated into an "ip route add" command that is
executed when the network is started. The command used is of the
following form:
ip route add <address>/<prefix> via <gateway> \
dev <virbr-bridge> proto static metric <metric>
Tests are done to validate that the input data are correct. For
example, for a static route ip definition, the address must be a
network address and not a host address. Additional checks are added
to ensure that the specified gateway is directly reachable via this
network (i.e. that the gateway IP address is in the same subnet as one
of the IP's defined for the network).
prefix='0' is supported for both family='ipv4' address='0.0.0.0'
netmask='0.0.0.0' or prefix='0', and for family='ipv6' address='::',
prefix=0', although care should be taken to not override a desired
system default route.
Anytime an attempt is made to define a static route which *exactly*
duplicates an existing static route (for example, address=::,
prefix=0, metric=1), the following error message will be sent to
syslog:
RTNETLINK answers: File exists
This can be overridden by decreasing the metric value for the route
that should be preferred, or increasing the metric for the route that
shouldn't be preferred (and is thus in place only in anticipation that
the preferred route may be removed in the future). Caution should be
used when manipulating route metrics, especially for a default route.
Note: The use of the command-line interface should be replaced by
direct use of libnl so that error conditions can be handled better. But,
that is being left as an exercise for another day.
Signed-off-by: Gene Czarcinski <gene@czarc.net>
Signed-off-by: Laine Stump <laine@laine.org>
On RHEL 6.4 (gcc 4.4.7), I got:
fdstreamtest.c: In function 'testFDStreamReadCommon':
fdstreamtest.c:44: error: declaration of 'tmpfile' shadows a global declaration [-Wshadow]
* tests/fdstreamtest.c (testFDStreamReadCommon)
(testFDStreamWriteCommon): Rename 'tmpfile' variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
The <filesystem> element can now accept a <driver type='nbd'/>
as an alternative to 'loop'. The benefit of NBD is support
for non-raw disk image formats.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.
Anyway for disks we have
<driver name="qemu" type="raw"/>
And for filesystems this change means we now have
<driver type="loop" format="raw"/>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:
libvirt qemu
-----------------------------------------
controller bus ($libvirt_controller.0)
bus channel
target scsi-id
unit lun
For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).
libvirt qemu
----------------------------------------------------------
controller && bus bus ($libvirt_controller.$libvirt_bus)
unit scsi-id
It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:
static const struct SCSIBusInfo megasas_scsi_info = {
.tcq = true,
.max_target = MFI_MAX_LD,
.max_lun = 255,
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
};
Example of the qemu command line (lsilogic controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,scsi-id=8,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Example of the qemu command line (virtio-scsi controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Adding two cap flags for scsi-generic:
QEMU_CAPS_SCSI_GENERIC
QEMU_CAPS_SCSI_GENERIC_BOOTINDEX
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
An example of the scsi hostdev XML:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0' target='4' unit='8'/>
</hostdev>
Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.
The device address must be specified manually. Later patch will let
libvirt generate it automatically.
This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Since the NPIV machine is not easy to get, it's very likely to
introduce regressions when doing changes on the existing code.
This patch dumps part of the sysfs files (the necessary ones)
of fc_host as test input data, to test the related util functions.
It could be extended for more fc_host related testing in future.
Add a test case which exercises the virFDStreamOpenFile
and virFDStreamCreateFile methods. Ensure that both the
synchronous and non-blocking iohelper code paths work.
This validates the regression recently fixed which
broke reading in non-blocking mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
'make check' fails since commit 470d5c46 on any system with dash
as /bin/sh, because '<<<' is a bash extension. For example:
nwfilterschematest: 23: /home/eblake/libvirt/tests/schematestutils.sh: Syntax error: redirection unexpected
Also, there is no need to spawn a grep process when shell globbing
can do the same.
* tests/schematestutils.sh: Replace bashism and subprocess with a
faster and portable construct.
Signed-off-by: Eric Blake <eblake@redhat.com>
Older versions of libxml2 could not correctly parse certain
URIs. This causes test failures. There's nothing libvirt can
do about this, so disable the problem tests on old libxml2
versions
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
Currently, using an invalid XML in tests fails, because
the schema test expects all of them to be valid.
Treat files with -invalid.xml suffix as invalid and expect
them to fail validation.
We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).
Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.
To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
I remembered to document this bit, but somehow forgot to implement it.
This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).
Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.
(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".
Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
Add a "dry run" address allocation to figure out how many bridges
will be needed for all the devices without explicit addresses.
Auto-add just enough bridges to put all the devices on, or up to the
bridge with the largest specified index.
<controller type='pci' index='0' model='pci-root'/>
is auto-added to pc* machine types.
Without this controller PCI bus 0 is not available and
no PCI addresses are assigned by default.
Since older libvirt supported PCI bus 0 even without
this controller, it is removed from the XML when migrating.
Now we set the default disk driver name when parsing
the qemu command line too, hence all the test changes.
Assume format type is 'auto' when none is specified on
qemu command line.
Instead of making a choice between the underscore and camelCase, this
simply changes "num_queues" into "queues", which is also consistent
with Michal's multiple queue support for interface.
Improve error reporting and generating of SPICE command line arguments
according to the need to enable TLS. If TLS is disabled, there's no need
to pass the certificate dir to qemu.
This patch resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=953126
It will simplify later work if the sub-drivers have dedicated
APIs / field names. ie virNetworkDriver should have
virDrvNetworkOpen and virDrvNetworkClose methods
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The driver.h struct for node devices used an inconsistent
naming scheme 'DeviceMonitor' instead of the more usual
'NodeDeviceDriver'. Fix this everywhere it has leaked
out to.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure that the driver struct field names match the public
API names. For an API virXXXX we must have a driver struct
field xXXXX. ie strip the leading 'vir' and lowercase any
leading uppercase letters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
http://www.uhv.edu/ac/newsletters/writing/grammartip2009.07.01.htm
(and several other sites) give hints that 'onto' is best used if
you can also add 'up' just before it and still make sense. In many
cases in the code base, we really want the two-word form, or even
a simplification to just 'on' or 'to'.
* docs/hacking.html.in: Use correct 'on to'.
* python/libvirt-override.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* src/util/virpci.c: Likewise.
* daemon/THREADS.txt: Use simpler 'on'.
* docs/formatdomain.html.in: Better usage.
* docs/internals/rpc.html.in: Likewise.
* src/conf/domain_event.c: Likewise.
* src/rpc/virnetclient.c: Likewise.
* tests/qemumonitortestutils.c: Likewise.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, -device xxx still doesn't work well for ppc64 platform.
It's better use legacy USB option with default for ppc64.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
With this patch, include public headers in "" form is only allowed
for "internal.h". And only the external tools (examples|tools|python
|include/libvirt) can include the public headers in <> form.
The recent qemu requires "0x" prefix for the disk wwn, this patch
changes virValidateWWN to allow the prefix, and prepend "0x" if
it's not specified. E.g.
qemu-kvm: -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,\
drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,wwn=6000c60016ea71ad:
Property 'scsi-hd.wwn' doesn't take value '6000c60016ea71ad'
Though it's a qemu regression, but it's nice to allow the prefix,
and doesn't hurt for us to always output "0x".
Commit id '1acfc171' resulted in the following valgrind failure:
==25317== 136 (24 direct, 112 indirect) bytes in 1 blocks are definitely lost in loss record 4 of 4
==25317== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25317== by 0x4C6F851: virAlloc (viralloc.c:124)
==25317== by 0x4C71493: virBitmapNew (virbitmap.c:74)
==25317== by 0x4C71B79: virBitmapNewData (virbitmap.c:434)
==25317== by 0x402EF2: test8 (virbitmaptest.c:436)
==25317== by 0x40499F: virtTestRun (testutils.c:157)
==25317== by 0x402E8D: mymain (virbitmaptest.c:474)
==25317== by 0x404FDA: virtTestMain (testutils.c:719)
==25317== by 0x39D0821A04: (below main) (in /usr/lib64/libc-2.16.so)
If a cgroup controller is co-mounted with another, eg
/sys/fs/cgroup/cpu,cpuacct
Then it is a requirement that there exist symlinks at
/sys/fs/cgroup/cpu
/sys/fs/cgroup/cpuacct
pointing to the real mount point. Add support to virCgroupPtr
to detect and track these symlinks
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupNewDriver method had a 'bool privileged' param.
If a false value was ever passed in, it would simply not
work, since non-root users don't have any privileges to create
new cgroups. Just delete this broken code entirely and make
the QEMU driver skip cgroup setup in non-privileged mode
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Allow VMs to be placed into resource groups using the
following syntax
<resource>
<partition>/virtualmachines/production</partition>
</resource>
A resource cgroup will be backed by some hypervisor specific
functionality, such as cgroups with KVM/LXC.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A resource partition is an absolute cgroup path, ignoring the
current process placement. Expose a virCgroupNewPartition API
for constructing such cgroups
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virCgroupPtr struct contains 3 pieces of
information
- path - path of the cgroup, relative to current process'
cgroup placement
- placement - current process' placement in each controller
- mounts - mount point of each controller
When reading/writing cgroup settings, the path & placement
strings are combined to form the file path. This approach
only works if we assume all cgroups will be relative to
the current process' cgroup placement.
To allow support for managing cgroups at any place in the
heirarchy a change is needed. The 'placement' data should
reflect the absolute path to the cgroup, and the 'path'
value should no longer be used to form the paths to the
cgroup attribute files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some aspects of the cgroups setup / detection code are quite subtle
and easy to break. It would greatly benefit from unit testing, but
this is difficult because the test suite won't have privileges to
play around with cgroups. The solution is to use monkey patching
via LD_PRELOAD to override the fopen, open, mkdir, access functions
to redirect access of cgroups files to some magic stubs in the
test suite.
Using this we provide custom content for the /proc/cgroup and
/proc/self/mounts files which report a fixed cgroup setup. We
then override open/mkdir/access so that access to the cgroups
filesystem gets redirected into files in a temporary directory
tree in the test suite build dir.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
On Win32 symlink() is not available, so virstoragetest.c
must be conditionalized to avoid compile failures.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To avoid the collision for creating USB controllers in machine->init()
and -device xx command line, it needs to set usb=off to avoid one USB
controller created in machine->init(). So that libvirt can use -device
or -usb to create USB controller sucessfully.
So QEMU_CAPS_MACHINE_USB_OPT capability is added, and it is for QEMU
v1.3.0 onwards which supports USB option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
This allows a container-type domain to have exclusive access to one of
the host's NICs.
Wire <hostdev caps=net> with the lxc_controller - when moving the newly
created veth devices into a new namespace, also look for any hostdev
devices that should be moved. Note: once the container domain has been
destroyed, there is no code that moves the interfaces back to the
original namespace. This does happen, though, probably due to default
cleanup on namespace destruction.
Signed-off-by: Bogdan Purcareata <bogdan.purcareata@freescale.com>
With this patch, one can specify the disk source using libvirt
storage like:
<disk type='volume' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source pool='default' volume='fc18.img'/>
<target dev='vdb' bus='virtio'/>
</disk>
"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.
docs/formatdomain.html.in:
* Add documents for new XMLs
docs/schemas/domaincommon.rng:
* Add rng for new XMLs;
src/conf/domain_conf.h:
* New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
* Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
* New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
type disk source.
* New helper virDomainDiskSourcePoolDefFree to free the source def
if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
* New test
This introduces 4 new attributes for storage pool source adapter.
E.g.
<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>
Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.
* docs/formatstorage.html.in:
- Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
- Add RNG schema
* src/conf/storage_conf.c:
- Parse and format the new XMLs
* src/conf/storage_conf.h:
- New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
- New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
- Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
- Replace "adapter" with "adapter.data.name", which is member of the union
of the new struct virStoragePoolSourceAdapter now. Later patch will
add the checking, as "adapter.data.name" is only valid for "scsi_host"
adapter.
* src/storage/storage_backend_scsi.c:
- Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
- New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
- Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
- New test
* tests/storagepoolxml2xmltest.c:
- Include the test
To avoid
virportallocatortest.c: In function 'bind':
virportallocatortest.c:34:33: warning: cast increases required alignment of target type [-Wcast-align]
struct sockaddr_in *saddr = (struct sockaddr_in *)addr;
^
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:
<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>
The corresponding QEMU command line:
-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.
A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.
Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.
This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
This patch implements the devices post parse callback and uses it to fill
the default qemu network card model into the XML if none is specified.
Libvirt assumes that the network card model for qemu is the "rtl8139".
Record this in the XML using the new callback to avoid user
confusion.
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.
With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.
Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
- called for a single device parsed and for every single device in a
domain config. A virDomainDeviceDefPtr is passed along with the
domain definition and virCaps.
* virDomainDefPostParseCallback, (domainPostParseCallback)
- A callback that is meant to process the domain config after it's
parsed. A virDomainDefPtr is passed along with virCaps.
Both types of callbacks support arbitrary opaque data passed for the
callback functions.
Errors may be reported in those callbacks resulting in a XML parsing
failure.
This patch is the result of running:
for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done
and a few manual tweaks.
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.
sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
sysinfotest_run(const char *test,
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virsh schedinfo was able to set only one parameter at a time (not
counting the deprecated options), but it is useful to set more at
once, so this patch adds the possibility to do stuff like this:
virsh schedinfo <domain> cpu_shares=0 vcpu_period=0 vcpu_quota=0 \
emulator_period=0 emulator_quota=0
Invalid scheduler options are reported as well. These were previously
reported only if the command hadn't updated any values (when
cmdSchedInfoUpdate returned 0).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=810078
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919372
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=919375
The domain XML generator creates the mac addres strings with lowercase
strings with a separate piece of code. This patch changes the formating
helper to do the same stuff to allow using it to normalize a string
provided by the user. After this change some of the tests that are
outputing the mac address will need to be changed.
Currently, -machine option is used only when dump-guest-core is set.
To use options defined in machine option for newer version of QEMU,
it needs to use -machine xxx, and to be compatible with older version
-M, this patch adds QEMU_CAPS_MACHINE_OPT capability for newer
version which supports -machine option.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reported by Anthony Messina in
https://bugzilla.redhat.com/show_bug.cgi?id=904692
Present since introduction of smartcard support in commit f5fd9baa
* src/qemu/qemu_command.c (qemuBuildCommandLine): Match qemu spelling.
* tests/qemuxml2argvdata/qemuxml2argv-smartcard-host-certificates.args:
Fix broken test.
Allow migration over IPv6 by listening on [::] instead of 0.0.0.0
when QEMU supports it (QEMU_CAPS_IPV6_MIGRATION) and there is
at least one v6 address configured on the system.
Use virURIParse in qemuMigrationPrepareDirect to allow parsing
IPv6 addresses, which would cause an 'incorrect :port' error
message before.
Move setting of migrateFrom from qemuMigrationPrepare{Direct,Tunnel}
after domain XML parsing, since we need the QEMU binary path from it
to get its capabilities.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=846013
This reverts commit 5ac846e42e.
After further discussions with Alon Levy, I learned the following:
The use of '-vga qxl' vs. '-device qxl-vga' is completely orthogonal
to whether ram_size can be exposed. Downstream distros are interested
in backporting support for multi-head qxl, but this can be done in
one of two ways:
1. Support one head per PCI device. If you do this, then it makes
sense to have full control over the PCI address of each device. For
full control, you need '-device qxl-vga' instead of '-vga qxl'.
2. Support multiple heads through a single PCI device. If you do
this, then you need to allocate more RAM to that PCI device (enough
ram to cover the multiple screens). Here, the device is hard-coded
to 0:0:2.0, both in qemu and libvirt code.
Apparently, backporting ram_size changes to allow multiple heads in
a single device is much easier than backporting multiple device
support. Furthermore, the presence or absence of qxl-vga.surfaces
is no different than the presence or absence of qxl-vga.ram_size;
both properties can be applied regardless of whether you have one
PCI device (-vga qxl) or multiple (-device qxl-vga), so this property
is NOT a good witness of whether '-device qxl-vga' support has been
backported.
Downstream RHEL will NOT be using this patch; and worse, leaving this
patch in risks doing the wrong thing if compiling upstream libvirt
on RHEL, so the best course of action is to revert it. That means
that libvirt will go back to only using '-device qxl-vga' for qemu
>= 1.2, but this is just fine because we know of no distros that plan
on backporting multiple PCI address support to any older version of
qemu. Meanwhile, downstream can still use ram_size to pack multiple
heads through a single PCI device.
This does nothing more than adding the new device and capability.
The device is present since QEMU 1.2.0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A better way to do this would be to use a configuration file like
[iscsi "target-name"]
user = name
password = pwd
and pass it via -readconfig. This would remove the username and password
from the "ps" output. For now, however, keep this solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
