These files are using functions from virstoragefile.h but are missing
explicit include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When adding a rule for an image file and that image file has a chain
of backing files then we need to add a rule for each of those files.
To get that iterate over the backing file chain the same way as
dac/selinux already do and add a label for each.
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/118
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Since Hyper-V allows multiple VMs to be created with the same name,
some commands produce unpredictable results due to
hypervDomainLookupByName's WMI query selecting the wrong domain.
For example, this prevents `virsh dumpxml` from outputting XML for the
wrong domain.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's better to fill in missing values in post parse callbacks
than during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The _virDomainMemoryDef structure has @uuid member which is
needed for PPC64 guests. No other architectures use it. Since the
member is VIR_UUID_BUFLEN bytes long, the structure is
unnecessary big. If the member is just a pointer then we can also
replace some calls of virUUIDIsValid() with plain test against
NULL and also simplify formatter code which can now also check
the pointer against NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Now we have everything prepared for generating the command line.
The device alias prefix was chosen to be 'virtiopmem'.
Since virtio-pmem-pci device goes onto PCI bus generating device
alias must have been changed slightly because
qemuAssignDeviceMemoryAlias() might have used DIMM slot number to
generate the alias. This obviously won't work and thus the "old"
way (which includes qemuDomainDeviceAliasIndex()) must be used.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1735375
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some users might want to have virtio-pmem backed by a block device
in which case we have to create the device in the domain private
namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some users might want to have virtio-pmem backed by a block
device in which case we have to allow the device in CGroups.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Just like with NVDIMM model, we have to relabel the path to
virtio-pmem so that QEMU can access it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The virtio-pmem is a virtio variant of NVDIMM and just like
NVDIMM virtio-pmem also allows accessing host pages bypassing
guest page cache. The difference is that if a regular file is
used to back guest's NVDIMM (model='nvdimm') the persistence of
guest writes might not be guaranteed while with virtio-pmem it
is.
To express this new model at domain XML level, I've chosen the
following:
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Another difference between NVDIMM and virtio-pmem is that while
the former supports NUMA node locality the latter doesn't. And
also, the latter goes onto PCI bus and not into a DIMM module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This commit introduces a new capability that reflects virtio-pmem-pci
device support in qemu:
QEMU_CAPS_DEVICE_VIRTIO_PMEM_PCI, /* -device virtio-pmem-pci */
The virtio-pmem-pci device was introduced in QEMU 4.1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In the past, the MTU of libvirt virtual network bridge devices was
implicitly set by setting the MTU of the "dummy tap device" (which was
being added in order to force a particular MAC address from the
bridge). But the dummy tap device was removed in commit ee6c936fbb
(libvirt-6.8.0), and so the mtu setting in the network is ignored.
The solution is, of course, to explicitly set the bridge device MTU
when it is created.
Note that any guest interface with a larger MTU that is attached will
cause the bridge to (temporarily) assume the larger MTU, but it will
revert to the bridge's own MTU when that device is deleted (this is
not due to anything libvirt does; it's just how Linux host bridges
work).
Fixes: ee6c936fbb
Resolves: https://bugzilla.redhat.com/1913561
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
managed='no' on an <interface> allows an unprivileged libvirt to use a
pre-created tap/macvtap device that libvirt has permission to
open/read/write, but no permission to modify (i.e. set the MTU or MAC
address). But when the XML had an <mtu size='blah'/> setting (which
was put there in order to tell the *guest* OS what MTU to set for the
emulated device at the other end of the tap) we were attempting to set
the MTU of the tap device on the host, paying no attention to the
setting of 'managed'. That would of course end in failure.
This patch only sets the MTU if managed='no' is *not* set (so, if it
is 'yes', or just not set at all).
Note that MTU of the tap is also set when connecting the tap to a
bridge device, but managed='no' is only allowed for <interface
type='ethernet'>, which would never attach to a bridge anyway, so we
don't need the check there.
Resolves: https://bugzilla.redhat.com/1905929
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Extract common code as helper function virNetlinkTalk, then simplify
the functions virNetlink[DumpLink|NewLink|DelLink|GetNeighbor].
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a macro NETLINK_MSG_APPEND to wrap nlmsg_append and
simplify code. Remove those labels 'buffer_too_small', since they
are now useless.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Move macros NETLINK_MSG_[NEST_START|NEST_END|PUT] from .h into .c;
within these macros, replace 'goto' with reporting error and returning;
simplify virNetlinkDumpLink and virNetlinkDelLink by using NETLINK_MSG_PUT.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
NLM_F_CREATE and NLM_F_EXCL are invalid for RTM_DELLINK,
so remove them.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit 154df5840d added support for <metadata_cache> as property of a
<disk>. Since the same parser is used to parse the XML used with
virDomainBlockCopy it starts the copy job with the appropriate cache
configured, but the <mirror> doesn't show this configuration nor it's
preserved if libvirtd is restarted during the mirror.
Add parsing, formatting and tests for <metadata_cache> for a <mirror>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Depending on the memballoon model, the corresponding QOM node
will have a different type and we need to account for this
when searching for it in the QOM tree.
https://bugzilla.redhat.com/show_bug.cgi?id=1911786
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When a block job is terminated we should clear the 'mirrorState' and
'mirrorJob' variables so that stale values are not present prior to a
new job.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the per-job state to determine when the non-shared-storage mirror is
complete rather than the per-disk definition one. The qemuBlockJobData
is a newer approach and is always cleared after the blockjob is
terminated while the 'mirrorState' variable in the definition of the
disk may be left over. In such case the disk mirror would be considered
complete prematurely.
https://bugzilla.redhat.com/show_bug.cgi?id=1889131
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far we assumed that any vhostuser interface is plugged into an
OVS bridge and thus 'ovs-vsctl' exists. But this is not always
true. In testing scenarios it is possible to create a vhostuser
interface with this tool dpdk-testpmd (part of dpdk RPM) which
creates/connects to UNIX socket needed for vhostuser. Of course,
since there is no OVS then there is no interface name in which
case virNetDevOpenvswitchGetVhostuserIfname() should return 0.
The rest of APIs that assume OVS are not 'fixed' because we still
want them to fail (e.g. getting statistics, plugging interface
into an OVS bridge, unplugging it from an OVS bridge, ...).
The only API that is fixed is
virNetDevOpenvswitchGetVhostuserIfname() because it is called
explicitly when starting a guest (and callers are okay if no name
was found).
The other way to fix this bug seems to be to simply require
'ovs-vsctl' on spec file level, but that is too heavy gun given
that vhostuser is used by a small set of our users (assumption
made on requirements for vhostuser). Also, this way would drag in
yet another dependency for all users (even those who want minimal
libvirt).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1913156
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that this function can be called regardless of interface type (and
whether or not we have a conn for the network driver), let's actually
call it for all interface types. This will assure that we re-connect
any disconnected bridge devices for <interface type='bridge'> as
mentioned in https://bugzilla.redhat.com/show_bug.cgi?id=1730084#c26
(until now we've only been reconnecting bridge devices for <interface
type='network'>)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bridge reattach functionality in this function should be called
for interface types other than just type='network', so make it
callable for any type - it just becomes a NOP for types where no
action is needed.
In the case of <interface type='network'> we need to create a port in
the network driver, and for both type='network and type='bridge' we
need to reattach the bridge device (note that
virDomainNetGetActualBridgeName() gets the bridge name from the
appropriate (and different!) location for either type of interface).
All other interfaces currently require no action.
modifying callers of this function to actually call it for all
interface types is in the next patch. For now the behavior should be
identical pre and post-patch.
(NB: the conn argument can now legitimately be NULL, so we need to
change the ATTRIBUTE_NONNULL() directive for the function's
declaration - I noticed when making this change that argument 3 (the
NetDefPtr) could never be NULL, so I added ATTRIBUTE_NONNULL(3) while
removing ATTRIBUTE_NONNULL(1) (conn)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>Reviewed-by: Michal Privoznik <mprivozn@redhat.com>#Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dnsmasq usually prints out a version string like this:
Dnsmasq version 2.82 [...]
but a user reported that the build of dnsmasq included with pihole has
a version string like this:
Dnsmasq version pi-hole-2.81 [...]
We parse the dnsmasq version number to figure out if the dnsmasq
binary supports certain features. Since we expect the version number
(and it must be only numbers!) to start on the first non-space after
the string "Dnsmasq version", we fail to parse this format of the
version string.
Rather than spending a bunch of time trying to get pihole to change
that, we can just make our parsing more permissive - after searching
for "Dnsmasq version", we'll skip ahead to the first decimal digit,
rather than just the first non-space.
(NB: The features we're checking for purely by looking at version
number have been in all releases of dnsmasq since at least 2012, so we
could actually just remove the reading of the version number
completely. However it's possible (although *highly* unlikely)
that some new feature would be added to dnsmasq in the future and we
would need to add that code back.)
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/29
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function skips over the beginning of a string until it reaches a
decimal digit (0-9) or the NULL at the end of the string. The original
pointer is modified in place (similar to virSkipSpaces()).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu's qcow2 driver allows control of the metadata cache of qcow2 driver
by the 'cache-size' property. Wire it up to the recently introduced
elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the domain config code it may be beneficial to control the
cache size of images introduced as snapshots into the backing chain.
Wire up handling of the 'metadata_cache' element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify the code with other places using virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable parsing of backing store strings containing the native 'nfs'
protocol specification.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement support for the 'nfs' native protocol driver in the qemu
driver.
QEMU accepts numeric UID/GID for 'nfs' protocol file driver thus libvirt
needs to perform the lookup prior to passing it to qemu.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'nfs_user'/'nfs_group' represents the XML configuration.
'nfs_uid'/'nfs_gid' is internal store when libvirt looks up the user's
uid/gid in the system.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
