While trying to build with -Os couple of compile errors showed
up.
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:13666:24: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virDomainChrDefPtr ret, **arrPtr = NULL;
^
Compiler fails to see that @ret is used only if set in the loop,
but whatever, there's no harm in initializing the variable.
In vboxAttachDrivesNew and _vboxAttachDrivesOld compiler thinks
that @rc may be used uninitialized. Well, not directly, but maybe
after some optimization. Yet again, no harm in initializing a
variable.
In file included from ./util/virthread.h:26:0,
from ./datatypes.h:28,
from vbox/vbox_tmpl.c:43,
from vbox/vbox_V3_1.c:37:
vbox/vbox_tmpl.c: In function '_vboxAttachDrivesOld':
./util/virerror.h:181:5: error: 'rc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
^
In file included from vbox/vbox_V3_1.c:37:0:
vbox/vbox_tmpl.c:1041:14: note: 'rc' was declared here
nsresult rc;
^
Yet again, one uninitialized variable:
qemu/qemu_driver.c: In function 'qemuDomainBlockCommit':
qemu/qemu_driver.c:17194:9: error: 'baseSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
qemuDomainPrepareDiskChainElement(driver, vm, baseSource,
^
And another one:
storage/storage_backend_logical.c: In function 'virStorageBackendLogicalMatchPoolSource.isra.2':
storage/storage_backend_logical.c:618:33: error: 'thisSource' may be used uninitialized in this function [-Werror=maybe-uninitialized]
thisSource->devices[j].path))
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 457ff97fa there are two defects in our code. In both of
them we use a signed variable to hold up a number of snapshots
that domain has. We use a helper function to count the number.
However, the helper function may fail in which case it returns
a negative one and control jumps to cleanup label where an
unsigned variable is used to iterate over array of snapshots. The
loop condition thus compare signed and unsigned variables which
in this specific case ends up badly for us.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Checking whether x > 0 before looping over [0..x] items doesn't make
sense and multi-line body must have curly brackets around it.
Best viewed with '-w'.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Allocate it as soon as we know we will need it.
Add it to def->ngraphics if it's allocated, removing the need
to use the addDesktop and totalPresent variables to track this.
Separate allocation of the def->graphics array from the allocation
and initialization of its first element.
Note that the only possible values of totalPresent at this point
are 0 or 1, because it equals to guiPresent + sdlPresent.
When FRONTEND/Type is not any of "sdl", "gui", "vrdp", we add a DESKTOP.
Use a bool to track this, instead of checking that both
totalPresent ("sdl" or "gui" present) and vrdpPresent are zero.
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allowing to have the extra undefined/default state.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
If the virStringSearch() returns a 0 (zero), then each of the uses
of the call will just jump to cleanup forgetting to free the returned
empty list. Expand the scope a bit of each use and free at cleanup.
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
Since the holdtime is not supported by VBOX SDK, it's being simulated
by sleeping before sending the key-up codes. The key-up codes are
auto-generated based on XT codeset rules (adding of 0x80 to key-down)
which results in the same behavior as for QEMU implementation.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
Wikipedia's list of common misspellings [1] has a machine-readable
version. This patch fixes those misspellings mentioned in the list
which don't have multiple right variants (as e.g. "accension", which can
be both "accession" and "ascension"), such misspellings are left
untouched. The list of changes was manually re-checked for false
positives.
[1] https://en.wikipedia.org/wiki/Wikipedia:Lists_of_common_misspellings/For_machines
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
For VBOX it's most likely that the connection is vbox:///session and it
runs with local non-root account. This caused permission denied when
LOCALSTATEDIR was used to create temp file. This patch makes use of the
virGetUserCacheDirectory to address this problem for non-root users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
