Replace virDomainChrSourceDefFree with virObjectUnref.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add helper for utilizing __attribute__(cleanup())) for unref-ing
instances of sublasses of virObject.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
So far the virInitctlSetRunLevel() is fully automatic. It finds
the correct fifo to use to talk to the init and it will set the
desired runlevel. Well, callers (so far there is just one) will
need to inspect the fifo a bit just before the runlevel is set.
Therefore, expose the internal list of fifos and also allow
caller to explicitly use one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virFirewallDGetBackend() reports whether firewalld is currently using
an iptables or an nftables backend.
virFirewallDGetVersion() learns the version of the firewalld running
on this system and returns it as 1000000*major + 1000*minor + micro.
virFirewallDGetZones() gets a list of all currently active firewalld
zones.
virFirewallDInterfaceSetZone() sets the firewalld zone of the given
interface.
virFirewallDZoneExists() can be used to learn whether or not a
particular zone is present and active in firewalld.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The vHBA/NPIV LUNs created via the udev processing of the
VPORT_CREATE command end up using the same serial value
as seen/generated by the /lib/udev/scsi_id as returned
during virStorageFileGetSCSIKey. Therefore, in order to
generate a unique enough key to be used when adding the
LUN as a volume during virStoragePoolObjAddVol a more
unique key needs to be generated for an NPIV volume.
The problem is illustrated by the following example, where
scsi_host5 is a vHBA used with the following LUNs:
$ lsscsi -tg
...
[5:0:4:0] disk fc:0x5006016844602198,0x101f00 /dev/sdh /dev/sg23
[5:0:5:0] disk fc:0x5006016044602198,0x102000 /dev/sdi /dev/sg24
...
Calling virStorageFileGetSCSIKey would return:
/lib/udev/scsi_id --device /dev/sdh --whitelisted --replace-whitespace /dev/sdh
350060160c460219850060160c4602198
/lib/udev/scsi_id --device /dev/sdh --whitelisted --replace-whitespace /dev/sdi
350060160c460219850060160c4602198
Note that althrough /dev/sdh and /dev/sdi are separate LUNs, they
end up with the same serial number used for the vol->key value.
When virStoragePoolFCRefreshThread calls virStoragePoolObjAddVol
the second LUN fails to be added with the following message
getting logged:
virHashAddOrUpdateEntry:341 : internal error: Duplicate key
To resolve this, virStorageFileGetNPIVKey will use a similar call
sequence as virStorageFileGetSCSIKey, except that it will add the
"--export" option to the call. This results in more detailed output
which needs to be parsed in order to formulate a unique enough key
to be used. In order to be unique enough, the returned value will
concatenate the target port as returned in the "ID_TARGET_PORT"
field from the command to the "ID_SERIAL" value.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the functions designed to deal with single images as the *Disk
functions were just wrappers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that we have replacement in the form of the image labeling function
we can drop the unnecessary functions by replacing all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Introduce the infrastructure necessary to manage a Storage Pool XML
Namespace. The general concept is similar to virDomainXMLNamespace,
except that for Storage Pools the storage backend specific details
can be stored within the _virStoragePoolOptions unlike the domain
processing code which manages its xmlopt's via the virDomainXMLOption
which is allocated/passed around for each domain.
This patch defines the add the parse, format, free, and href methods
required to process the XML and callout from the Storage Pool Def
parse, format, and free API's to perform the action on the XML data
for/from the backend.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically firewall rules for virtual networks were added straight
into the base chains. This works but has a number of bugs and design
limitations:
- It is inflexible for admins wanting to add extra rules ahead
of libvirt's rules, via hook scripts.
- It is not clear to the admin that the rules were created by
libvirt
- Each rule must be deleted by libvirt individually since they
are all directly in the builtin chains
- The ordering of rules in the forward chain is incorrect
when multiple networks are created, allowing traffic to
mistakenly flow between networks in one direction.
To address all of these problems, libvirt needs to move to creating
rules in its own private chains. In the top level builtin chains,
libvirt will add links to its own private top level chains.
Addressing the traffic ordering bug requires some extra steps. With
everything going into the FORWARD chain there was interleaving of rules
for outbound traffic and inbound traffic for each network:
-A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
The rule allowing outbound traffic from virbr1 would mistakenly
allow packets from virbr1 to virbr0, before the rule denying input
to virbr0 gets a chance to run.
What we really need todo is group the forwarding rules into three
distinct sets:
* Cross rules - LIBVIRT_FWX
-A FORWARD -i virbr1 -o virbr1 -j ACCEPT
-A FORWARD -i virbr0 -o virbr0 -j ACCEPT
* Incoming rules - LIBVIRT_FWI
-A FORWARD -d 192.168.3.0/24 -o virbr1 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -d 192.168.2.0/24 -o virbr0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -o virbr0 -j REJECT --reject-with icmp-port-unreachable
* Outgoing rules - LIBVIRT_FWO
-A FORWARD -s 192.168.3.0/24 -i virbr1 -j ACCEPT
-A FORWARD -i virbr1 -j REJECT --reject-with icmp-port-unreachable
-A FORWARD -s 192.168.2.0/24 -i virbr0 -j ACCEPT
-A FORWARD -i virbr0 -j REJECT --reject-with icmp-port-unreachable
There is thus no risk of outgoing rules for one network mistakenly
allowing incoming traffic for another network, as all incoming rules
are evalated first.
With this in mind, we'll thus need three distinct chains linked from
the FORWARD chain, so we end up with:
INPUT --> LIBVIRT_INP (filter)
OUTPUT --> LIBVIRT_OUT (filter)
FORWARD +-> LIBVIRT_FWX (filter)
+-> LIBVIRT_FWO
\-> LIBVIRT_FWI
POSTROUTING --> LIBVIRT_PRT (nat & mangle)
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Upcoming patches need an array of strings for use in QMP
block-dirty-bitmap-merge. A convenience wrapper cuts down
on the verbosity of creating the array, similar to the
existing virJSONValueObjectAppendString().
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is essentially a wrapper for easily setting the variable
name in virDomainDeviceDef that matches its associated
VIR_DOMAIN_DEVICE_TYPE.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This will be extended in the future, so let's simplify things by
centralizing the checks.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A few simple helpers that allow us to determine whether a graphics can
and will need to make use of a DRM render node.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is the first step towards libvirt picking the first available
render node instead of QEMU. It also makes sense for us to be able to do
that, since we allow specifying the node directly for SPICE, so if
there's no render node specified by the user, we should pick the first
available one. The algorithm used for that is essentially the same as
the one QEMU uses.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The call of virResctrlMonitorGetStats will allocate the memory for
holding cache occupancy or memory bandwidth statistics.
This patch adds the function virResctrlMonitorFreeStats as the
opposing action of virResctrlMonitorGetStats to free the memory.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This new helper can be used to spawn a child process and run
passed callback from it. This will come handy esp. if the
callback is not thread safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This patch adds new functions for reservation, assignment and release
to handle the uid/fid. If the uid/fid is defined in the domain XML,
they will be reserved directly in the collecting phase. If any of them
is not defined, we will find out an available value for them from the
zPCI address hashtable, and reserve them. For the hotplug case there
might not be a zPCI definition. So allocate and reserve uid/fid the
case. Assign if needed and reserve uid/fid for the defined case.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This patch introduces new XML parser/formatter functions. Uid is
16-bit and non-zero. Fid is 32-bit. They are the two attributes of zpci
which is introduced as PCI address element. Zpci element is parsed and
formatted along with PCI address. And add the related test cases.
Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add interfaces monitor group to support operations such
as GetID, SetID, Remove, SetAlloc, etc.
Implement the internal virResctrlMonitorGetStats to fetch all
the statistical data and the virResctrlMonitorGetCacheOccupancy
in order to fetch the cache specific "llc_occupancy" value.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add interface for creating the resource monitoring group according
to '@virResctrlMonitor->path'.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add interface for resctrl monitor to determine the path.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Cache Monitoring Technology (aka CMT) provides the capability
to report cache utilization information of system task.
This patch introduces the concept of resctrl monitor through
data structure virResctrlMonitor.
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
There's a lot of stuff going on in src/conf/nodedev_conf which is
sometimes not directly related to config and we're not really consistent
with putting only parser/formatter related stuff here, e.g. like we do
for domains. So, let's start simply by adding a new module
node_device_util containing some of the helpers. Unfortunately, even
though these helpers tend to open a secondary driver connection and would
be much therefore better suited as a nodedev driver module, we can't do
that without pulling headers from the driver into conf/ and that's wrong
because we want conf/ to stay driver-agnostic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Place cgroup v2 backend type before cgroup v1 to make it obvious
that cgroup v2 is preferred implementation.
Following patches will introduce support for hybrid configuration
which will allow us to use both at the same time, but we should
prefer cgroup v2 regardless.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We will need to extract current cgroup v1 implementation into separate
backend because there will be new cgroup v2 implementation and both will
have to co-exist.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This will be required once cgroup v2 is introduced. The cgroup
detection is not simple and we will have multiple backends so we
should not just jump into the middle of the detection code.
In order to use virCgroupNewSelf we need to create all the remaining
data files:
- {name}.cgroups represents /proc/cgroups, it is a list of cgroup
controllers compiled into kernel
- {name}.self.cgroup represents /proc/self/cgroup, it describes
cgroups to which the process belongs
For "no-cgroups" we need to modify the expected behavior because
virCgroupNewSelf() will fail if there are no controllers available.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Because we can set which files to return for cgroup tests there
is no need to have special function tailored to run tests.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Once we introduce cgroup v2 support we need to handle processes and
threads differently.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In cgroup v2 we need to handle processes and threads differently,
following patch will introduce virCgroupAddThread.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This patch is introducing cache monitor(CMT) to cache and
memory bandwidth monitor(MBM) for monitoring CPU memory
bandwidth.
The host capability of the two monitors is also introduced
in this patch.
For CMT, the host capability is shown like:
<host>
...
<cache>
<bank id='0' level='3' type='both' size='15' unit='MiB' cpus='0-5'>
<control granularity='768' min='1536' unit='KiB' type='both' maxAllocs='4'/>
</bank>
<monitor level='3' 'reuseThreshold'='270336' maxMonitors='176'>
<feature name='llc_occupancy'/>
</monitor>
</cache>
...
</host>
For MBM, the capability is shown like this:
<host>
...
<memory_bandwidth>
<node id='1' cpus='6-11'>
<control granularity='10' min ='10' maxAllocs='4'/>
</node>
<monitor maxMonitors='176'>
<feature name='mbm_total_bytes'/>
<feature name='mbm_local_bytes'/>
</monitor>
</memory_bandwidth>
...
</host>
Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Functions that deal with virPCIDeviceAddress exclusively
belong to util/virpci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Instead of duplicating the code from virGet{User,Group}IDByName(), which are
static anyway, extend those functions to accept NULL pointers for the result and
a boolean for controlling the error reporting.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch introduces virNetlinkNewLink helper which wraps the common
libnl/netlink code to create a new link.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The struct is called virPCIDeviceAddress and the
functions operating on it should be named accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The function is called on a virDomainDeviceInfo, so it
should be declared along with it.
Moving this function requires moving and making public
virDomainDeviceCCWAddressIsValid() as well, but that's
perfectly fine since the same reasoning above also
applies to it, due to virDomainDeviceCCWAddress being
(correctly) declared in device_conf.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's used in virDomainDeviceInfo, which makes
domain_conf the wrong place to declare it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Just like a few commits earlier, checking for pool source
duplicates and unlocking pools list afterwards is a buggy
pattern. The check must go into virStoragePoolObjAssignDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Even though we do some checking it is not as thorough as it
should be. We already have virStoragePoolObjIsDuplicate but the
way we use it is a typical TOCTOU. Imagine two threads trying to
define two pools with the same name but different UUIDs. With the
current code neither of them finds a duplicate and thus proceed
to virStoragePoolObjAssignDef where only names are compared.
Therefore both threads succeed which is obviously wrong.
We should check for duplicates where we care for them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Turn
virPCIDeviceAddressIsEmpty()
virDeviceInfoPCIAddressIsWanted()
virDeviceInfoPCIAddressIsPresent()
from inline functions to regular functions.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
