Usually, this variable is used to hold the return value for a
function of ours. Well, this is not the case. Its use does not
match our pattern and therefore it is very misleading. Drop it
and define an alternative @rc variable, but only in that single
block where it is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This variable is very misleading. We use VIR_FORCE_CLOSE to set
it to -1 and returning it even though it does not refer to a FD
at all. It merely holds 0 or -1. Drop it completely. Also, at the
same time some corner cases are fixed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
In this function we create a macvtap device and open its tap
device. Possibly multiple times. Now the thing is, if opening the
tap device fails, that is virNetDevMacVLanTapOpen() returns a
negative value, we unroll all the changes BUT return 0 fooling
caller into thinking everything went okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit b3e4401dc620 introduced a check to ignore an error if the guest
is already terminated. However the check accidentally compared
error.code with VIR_ERR_ERROR, which is an error level, not an error
code. Because of this, almost every error got silently ignored.
Fixes: b3e4401dc620 ("systemd: don't report an error if the guest is
already terminated")
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
The virJSONValueArraySize() function return ssize_t (with
possibly returning -1 if the passed json is not an array).
Storing the return value into size_t is possibly dangerous then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1356436
According to RFC 3721 (https://www.ietf.org/rfc/rfc3721.txt), there are
two ways to "discover" targets in/for the iSCSI environment. Discovery
is the process which allows the initiator to find the targets to which
it has access and at least one address at which each target may be
accessed.
The method currently implemented in libvirt using the virISCSIScanTargets
API is known as "SendTargets" discovery. This method is more useful when
the target IP Address and TCP port information are available, e.g. in
libvirt terms the "portal". It returns a list of targets for the portal.
From that list, the target can be found. This operation can also fill an
iSCSI node table into which iSCSI logins may occur. Commit id '56057900'
altered that filling by adding the "--op nonpersistent" since it was
not necessarily desired to perform that for non libvirt related targets.
The second method is "Static Configuration". This method not only needs
the IP Address and TCP port (e.g. portal), but also the iSCSI target name.
In libvirt terms this would be the device path field from the iSCSI pool
<source> XML. This patch implements the second methodology using that
required device path as the targetname.
The current LUKS support has a "luks" volume type which has
a "luks" encryption format.
This partially makes sense if you consider the QEMU shorthand
syntax only requires you to specify a format=luks, and it'll
automagically uses "raw" as the next level driver. QEMU will
however let you override the "raw" with any other driver it
supports (vmdk, qcow, rbd, iscsi, etc, etc)
IOW the intention though is that the "luks" encryption format
is applied to all disk formats (whether raw, qcow2, rbd, gluster
or whatever). As such it doesn't make much sense for libvirt
to say the volume type is "luks" - we should be saying that it
is a "raw" file, but with "luks" encryption applied.
IOW, when creating a storage volume we should use this XML
<volume>
<name>demo.raw</name>
<capacity>5368709120</capacity>
<target>
<format type='raw'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</target>
</volume>
and when configuring a guest disk we should use
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/home/berrange/VirtualMachines/demo.raw'/>
<target dev='sda' bus='scsi'/>
<encryption format='luks'>
<secret type='passphrase' uuid='0a81f5b2-8403-7b23-c8d6-21ccd2f80d6f'/>
</encryption>
</disk>
This commit thus removes the "luks" storage volume type added
in
commit 318ebb36f1027b3357a32d6f781bd77d7a9043fd
Author: John Ferlan <jferlan@redhat.com>
Date: Tue Jun 21 12:59:54 2016 -0400
util: Add 'luks' to the FileTypeInfo
The storage file probing code is modified so that it can probe
the actual encryption formats explicitly, rather than merely
probing existance of encryption and letting the storage driver
guess the format.
The rest of the code is then adapted to deal with
VIR_STORAGE_FILE_RAW w/ VIR_STORAGE_ENCRYPTION_FORMAT_LUKS
instead of just VIR_STORAGE_FILE_LUKS.
The commit mentioned above was included in libvirt v2.0.0.
So when querying volume XML this will be a change in behaviour
vs the 2.0.0 release - it'll report 'raw' instead of 'luks'
for the volume format, but still report 'luks' for encryption
format. I think this change is OK because the storage driver
did not include any support for creating volumes, nor starting
guets with luks volumes in v2.0.0 - that only since then.
Clearly if we change this we must do it before v2.1.0 though.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refactor the virStorageFileMatchesNNN methods so that
they don't take a struct FileFormatInfo parameter, but
instead get the actual raw dat items they needs. This
will facilitate reuse in other contexts.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To allow richer definitions of disk sources add infrastructure that will
allow to register functionst generating a JSON object based definition.
This infrastructure will then convert the definition to the proper
command line syntax and use it in cases where it's necessary. This will
allow to keep legacy definitions for back-compat when possible and use
the new definitions for the configurations requiring them.
Add support for converting objects nested in arrays with a numbering
discriminator on the command line. This syntax is used for the
object-based specification of disk source properties.
Add a modular parser that will allow to parse 'json' backing definitions
that are supported by qemu. The initial implementation adds support for
the 'file' driver.
Due to the approach qemu took to implement the JSON backing strings it's
possible to specify them in two approaches.
The object approach:
json:{ "file" : { "driver":"file",
"filename":"/path/to/file"
}
}
And a partially flattened approach:
json:{"file.driver":"file"
"file.filename":"/path/to/file"
}
Both of the above are supported by qemu and by the code added in this
commit. The current implementation de-flattens the first level ('file.')
if possible and required. Other handling may be added later but
currently only one level was possible anyways.
Since commit c4bdff19, the path to the configuration file has been constructed
in the following manner:
- if no config filename was passed to virConfLoadConfigPath, libvirt.conf was
used as default
- otherwise the filename was concatenated with
"<config_dir>/libvirt/libvirt%s%s.conf" which in admin case resulted in
"libvirt-libvirt-admin.conf.conf". Obviously, this non-existent config led to
ignoring all user settings in libvirt-admin.conf. This patch requires the
config filename to be always provided as an argument with the concatenation
being simplified.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1357364
Signed-off-by: Erik Skultety <eskultet@redhat.com>
For use with memory hotplug virQEMUBuildCommandLineJSONRecurse attempted
to format JSON arrays as bitmap on the command line. Make the formatter
function configurable so that it can be reused with different syntaxes
of arrays such as numbered arrays for use with disk sources.
This patch extracts the code and adds a parameter for the function that
will allow to plug in different formatters.
Until now the JSON->commandline convertor was used only for objects
created by qemu. To allow reusing it with disk formatter we'll need to
escape ',' as usual in qemu commandlines.
Refactor the command line generator by adding a wrapper (with
documentation) that will handle the outermost object iteration.
This patch also renames the functions and tweaks the error message for
nested arrays to be more universal.
The new function is then reused to simplify qemucommandutiltest.
As we already test that the extraction of the backing store string works
well additional tests for the backing store string parser can be made
simpler.
Export virStorageSourceNewFromBackingAbsolute and use it to parse the
backing store strings, format them using virDomainDiskSourceFormat and
match them against expected XMLs.
The symbol being missing has been reported as causing build
failures on OS X. If it's not already defined, define it to
zero so that it won't have any effect.
Partially resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=1301021
If the volume xml was looking to create a luks volume take the necessary
steps in order to make that happen.
The processing will be:
1. create a temporary file (virStorageBackendCreateQemuImgSecretPath)
1a. use the storage driver state dir path that uses the pool and
volume name as a base.
2. create a secret object (virStorageBackendCreateQemuImgSecretObject)
2a. use an alias combinding the volume name and "_luks0"
2b. add the file to the object
3. create/add luks options to the commandline (virQEMUBuildLuksOpts)
3a. at the very least a "key-secret=%s" using the secret object alias
3b. if found in the XML the various "cipher" and "ivgen" options
Signed-off-by: John Ferlan <jferlan@redhat.com>
virConfGetValueLLong() errors out if the value is too big to
fit into a long long integer, but claims the supported range
to be (0,LLONG_MAX) instead of (LLONG_MIN,LLONG_MAX).
When parsing numeric values, we always store them as unsigned
unless they're negative. We can use this fact to simplify the
logic by removing a bunch of unnecessary checks.
Commit 6381c89f8cce changed virConfValue to store long long
integers instead of long integers; however, the temporary variable
used in virConfParseLong() was not updated accordingly, causing
trouble for 32-bit machines.
If size_t is the same size as long long, then we can skip
some of the range checks. This avoids triggering some
bogus compiler warning messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virConf 'l' field is a 'signed long long', so whenever
the 'type' field is VIR_CONF_ULONG, we should explicitly cast
'l' to a 'unsigned long long' before doing range checks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function tries to get a ssize_t value from a config file.
But before returning it, it checks whether the value would fit in
ssize_t and if not an error is printed out among with the range
for the ssize_t type. However, on some platforms SSIZE_MAX may
actually be a signed long type:
util/virconf.c: In function 'virConfGetValueSSizeT':
util/virconf.c:1268:9: error: format '%zd' expects argument of type 'signed size_t', but argument 9 has type 'long int' [-Werror=format=]
virReportError(VIR_ERR_INTERNAL_ERROR,
^
$ grep -r SSIZE_MAX /usr/include/
/usr/include/bits/posix1_lim.h:#ifndef SSIZE_MAX
/usr/include/bits/posix1_lim.h:# define SSIZE_MAX LONG_MAX
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
IPv6 RA always contains an implicit default route via
the link-local address of the source of RA. This forces
the guest to install a route via isolated network, which
may disturb the guest's networking in case of multiple interfaces.
More info in 013427e6e733f7a662f4e8a9c11f7dad4cd65e3f.
The validity of this route is controlled by "default [route] lifetime"
field of RA. If the lifetime is set to 0 seconds, then no route
is installed by receiver.
dnsmasq 2.67+ supports "ra-param=<interface>,<RA interval>,<default
lifetime>" option. We pass "ra-param=*,0,0"
(here, RA_interval=0 means default) to disable default gateway in RA
for isolated networks.
At least with systemd v210, NOTIFY_SOCKET is abstact, e.g.
@/org/freedesktop/systemd1/notify. sendmsg() fails on such a socket
with "Connection refused". The unix(7) man page contains the following
details wrt abstract socket addresses
abstract: an abstract socket address is distinguished (from a
pathname socket) by the fact that sun_path[0] is a null byte
('\0'). The socket's address in this namespace is given by the
additional bytes in sun_path that are covered by the specified
length of the address structure. (Null bytes in the name have
no special significance.)
So we need to be more precise about the address length, setting it to
the sizeof sa_family_t + length of address copied to sun_path instead
of setting it to the sizeof the entire sockaddr_un struct.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=987668
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
