CVE-2013-6458
Every API that is going to begin a job should do that before fetching
data from vm->def.
(cherry picked from commit 3b56425938e2f97208d5918263efa0d6439e4ecd)
Every API that is going to begin a job should do that before fetching
data from vm->def.
(cherry picked from commit ff5f30b6bfa317f2a4c33f69289baf4e887eb048)
Conflicts:
src/qemu/qemu_driver.c - context
CVE-2013-6458
Every API that is going to begin a job should do that before fetching
data from vm->def.
(cherry picked from commit f93d2caa070f6197ab50d372d286018b0ba6bbd8)
CVE-2013-6458
Generally, every API that is going to begin a job should do that before
fetching data from vm->def. However, qemuDomainGetBlockInfo does not
know whether it will have to start a job or not before checking vm->def.
To avoid using disk alias that might have been freed while we were
waiting for a job, we use its copy. In case the disk was removed in the
meantime, we will fail with "cannot find statistics for device '...'"
error message.
(cherry picked from commit b799259583bd65c0b2f5042e6c3ff19637ade881)
CVE-2013-6458
https://bugzilla.redhat.com/show_bug.cgi?id=1043069
When virDomainDetachDeviceFlags is called concurrently to
virDomainBlockStats: libvirtd may crash because qemuDomainBlockStats
finds a disk in vm->def before getting a job on a domain and uses the
disk pointer after getting the job. However, the domain in unlocked
while waiting on a job condition and thus data behind the disk pointer
may disappear. This happens when thread 1 runs
virDomainDetachDeviceFlags and enters monitor to actually remove the
disk. Then another thread starts running virDomainBlockStats, finds the
disk in vm->def, and while it's waiting on the job condition (owned by
the first thread), the first thread finishes the disk removal. When the
second thread gets the job, the memory pointed to be the disk pointer is
already gone.
That said, every API that is going to begin a job should do that before
fetching data from vm->def.
(cherry picked from commit db86da5ca2109e4006c286a09b6c75bfe10676ad)
Conflicts:
src/qemu/qemu_driver.c - context: no ACLs
After successful @cmd construction the memory where @keys points to is
part of @cmd. Avoid double freeing it.
(cherry picked from commit 3e8343e1510741623aa5bc1dfb74ec39fde868dd)
Remove assignment of the string freed by virURIFree
to hostname, since it's not used anywhere.
Double free introduced by ddf8ad8, useless code
introduced by f03dcc5.
https://bugzilla.redhat.com/show_bug.cgi?id=977961
(cherry picked from commit 5744d96f211160d406ec0498c2f814a67d1a3fc8)
If qemuMonitorBlockJob returned 0, qemuDomainBlockPivot
might return 0 even if an error occured.
https://bugzilla.redhat.com/show_bug.cgi?id=977678
(cherry picked from commit c34107dfd3a25232255e6d6f559b1306ef99bb3b)
As a consequence of the cgroup layout changes from commit '632f78ca', the
qemuDomainGetSchedulerParameters[Flags]()' and qemuGetSchedulerType() APIs
failed to return data for a non running domain. This can be seen through
a 'virsh schedinfo <domain>' command which returns:
Scheduler : Unknown
error: Requested operation is not valid: cgroup CPU controller is not mounted
Prior to that change a non running domain would return:
Scheduler : posix
cpu_shares : 0
vcpu_period : 0
vcpu_quota : 0
emulator_period: 0
emulator_quota : 0
This patch will restore the capability to return configuration only data
for a non running domain regardless of whether cgroups are available.
(cherry picked from commit b23754534193fb7a1e31306d94ae5f09759a0aa4)
This should resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=959191
The problem was that qemuUpdateActivePciHostdevs was returning 0
(success) when no hostdevs were present, but would otherwise return -1
(failure) even when it completed successfully. It is only called from
qemuProcessReconnect(), and when qemuProcessReconnect got back an
error, it would not only stop reconnecting, but would terminate the
guest qemu process "to remove danger of it ending up running twice if
user tries to start it again later".
(This bug was introduced in commit 011cf7ad, which was pushed between
v1.0.2 and v1.0.3, so all maintenance branches from v1.0.3 up to 1.0.5
will need this one line patch applied.)
A literal IPv6 must be escaped, otherwise migration fails with:
unable to execute QEMU command 'drive-mirror': address resolution failed
for f0::0d:5901: Servname not supported for ai_socktype
since QEMU treats everything after the first ':' as the port.
If snapshot creation failed for example due to invalid use of the
"REUSE_EXTERNAL" flag, libvirt killed access to the original image file
instead of the new image file. On machines with selinux this kills the
whole VM as the selinux context is enforced immediately.
* qemu_driver.c:qemuDomainSnapshotUndoSingleDiskActive():
- Kill access to the new image file instead of the old one.
Partially resolves: https://bugzilla.redhat.com/show_bug.cgi?id=906639
A bug in Cygwin [1] and poor error messages from gcc [2] lead
to this confusing compilation error:
qemu/qemu_monitor.c:418:9: error: passing argument 2 of 'sendmsg' from incmpatible pointer type
/usr/include/sys/socket.h:42:11: note: expected 'const struct msghdr *' but argument is of type 'struct msghdr *'
[1] http://cygwin.com/ml/cygwin/2013-05/msg00451.html
[2] http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57475
* src/qemu/qemu_monitor.c (includes): Include <sys/socket.h>
before <sys/un.h>.
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a recurring problem for cygwin :)
For example, see commit 23a4df88.
qemu/qemu_driver.c: In function 'qemuStateInitialize':
qemu/qemu_driver.c:691:13: error: format '%d' expects type 'int', but argument 8 has type 'uid_t' [-Wformat]
* src/qemu/qemu_driver.c (qemuStateInitialize): Add casts.
* daemon/remote.c (remoteDispatchAuthList): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
A cygwin build of the qemu driver fails with:
qemu/qemu_process.c: In function 'qemuPrepareCpumap':
qemu/qemu_process.c:1803:31: error: 'CPU_SETSIZE' undeclared (first use in this function)
CPU_SETSIZE is a Linux extension in <sched.h>; a bit more portable
is using sysconf if _SC_NPROCESSORS_CONF is defined (several platforms
have it, including Cygwin). Ultimately, I would have preferred to
use gnulib's 'nproc' module, but it is currently under an incompatible
license.
* src/qemu/qemu_conf.h (QEMUD_CPUMASK_LEN): Provide definition on
cygwin.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, if there's an error opening /dev/vhost-net (e.g. because
it doesn't exist) but it's not required we proceed with vhostfd array
filled with -1 and vhostfdSize unchanged. Later, when constructing
the qemu command line only non-negative items within vhostfd array
are taken into account. This means, vhostfdSize may be greater than
the actual count of non-negative items in vhostfd array. This results
in improper command line arguments being generated, e.g.:
-netdev tap,fd=21,id=hostnet0,vhost=on,vhostfd=(null)
If we are just ejecting media, ret == -1 even after the retry loop
determines that the tray is open, as requested. This means media
disconnect always report's error.
Fix it, and fix some other mini issues:
- Don't overwrite the 'eject' error message if the retry loop fails
- Move the retries decrement inside the loop, otherwise the final loop
might succeed, yet retries == 0 and we will raise error
- Setting ret = -1 in the disk->src check is unneeded
- Fix comment typos
cc: mprivozn@redhat.com
Currently qemuDomainReboot() does reboot in two phases:
qemuMonitorSystemPowerdown() and qemuProcessFakeReboot().
qemuMonitorSystemPowerdown() shutdowns the domain and saves domain
state/reason as VIR_DOMAIN_SHUTDOWN_UNKNOWN.
qemuProcessFakeReboot() sets domain state/reason to
VIR_DOMAIN_RESUMED_UNPAUSED but does not save domain state changes.
Subsequent restart of libvirtd leads to restoring domain state/reason to
saved that is VIR_DOMAIN_SHUTDOWN_UNKNOWN and to automatic shutdown of
the domain. This commit adds virDomainSaveStatus() into
qemuProcessFakeReboot() to avoid unexpected shutdowns.
With previous patch, we accept negative value as length of string to
duplicate. So there is no need to pass strlen(src) in case we want to do
duplicate the whole string.
Function qemuDomainSetBlockIoTune() was checking QEMU capabilities
even when !(flags & VIR_DOMAIN_AFFECT_LIVE) and the domain was
shutoff, resulting in the following problem:
virsh # domstate asdf; blkdeviotune asdf vda --write-bytes-sec 100
shut off
error: Unable to change block I/O throttle
error: unsupported configuration: block I/O throttling not supported with this QEMU binary
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=965016
Since f03dcc5 we use [::] as the listening address both on qemu
command line in -incoming and in nbd-server-start QMP command.
However the latter requires just :: without the braces.
In order to learn libvirt multiqueue several things must be done:
1) The '/dev/net/tun' device needs to be opened multiple times with
IFF_MULTI_QUEUE flag passed to ioctl(fd, TUNSETIFF, &ifr);
2) Similarly, '/dev/vhost-net' must be opened as many times as in 1)
in order to keep 1:1 ratio recommended by qemu and kernel folks.
3) The command line construction code needs to switch from 'fd=X' to
'fds=X:Y:...:Z' and from 'vhostfd=X' to 'vhostfds=X:Y:...:Z'.
4) The monitor handling code needs to learn to pass multiple FDs.
In 84c59ffa I've tried to fix changing ejectable media process. The
process should go like this:
1) we need to call 'eject' on the monitor
2) we should wait for 'DEVICE_TRAY_MOVED' event
3) now we can issue 'change' command
However, while waiting in step 2) the domain monitor was locked. So
even if qemu reported the desired event, the proper callback was not
called immediately. The monitor handling code needs to lock the
monitor in order to read the event. So that's the first lock we must
not hold while waiting. The second one is the domain lock. When
monitor handling code reads an event, the appropriate callback is
called then. The first thing that each callback does is locking the
corresponding domain as a domain or its device is about to change
state. So we need to unlock both monitor and VM lock. Well, holding
any lock while sleep()-ing is not the best thing to do anyway.
Since 0d70656afded, it starts to access the sysfs files to build
the qemu command line (by virSCSIDeviceGetSgName, which is to find
out the scsi generic device name by adpater🚌target:unit), there
is no way to work around, qemu wants to see the scsi generic device
like "/dev/sg6" anyway.
And there might be other places which need to access sysfs files
when building qemu command line in future.
Instead of increasing the arguments of qemuBuildCommandLine, this
introduces a new callback for qemuBuildCommandLine, and thus tests
can register their own callbacks for sysfs test input files accessing.
* src/qemu/qemu_command.h: (New callback struct
qemuBuildCommandLineCallbacks;
extern buildCommandLineCallbacks)
* src/qemu/qemu_command.c: (wire up the callback struct)
* src/qemu/qemu_driver.c: (Use the new syntax of qemuBuildCommandLine)
* src/qemu/qemu_hotplug.c: Likewise
* src/qemu/qemu_process.c: Likewise
* tests/testutilsqemu.[ch]: (Helper testSCSIDeviceGetSgName;
callback struct testCallbacks;)
* tests/qemuxml2argvtest.c: (Use testCallbacks)
* src/tests/qemuxmlnstest.c: (Like above)
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=927620
#kill -STOP `pidof qemu-kvm`
#virsh destroy $guest --graceful
error: Failed to destroy domain testVM
error: An error occurred, but the cause is unknown
With --graceful, SIGTERM always is emitted to kill driver
process, but it won't success till burning out waiting time
in case of process being stopped.
But domain destroy without --graceful can work, SIGKILL will
be emitted to the stopped process after 10 secs which always
kills a process even one that is currently stopped.
So report an error after burning out waiting time in this case.
Change bbe97ae968eba60b71e0066d49f9fc909966d9d6 caused the
QEMU driver to ignore ENOENT errors from cgroups, in order
to cope with missing /proc/cgroups. This is not good though
because many other things can cause ENOENT and should not
be ignored. The callers expect to see ENXIO when cgroups
are not present, so adjust the code to report that errno
when /proc/cgroups is missing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit 632f78c introduced a regression which causes schedinfo being
unable to set some parameters. When migrating to priv->cgroup there
was missing variable left out and due to passed NULL to underlying
function, the setting failed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=963592
