Commit Graph

2429 Commits

Author SHA1 Message Date
Pavel Hrdina
04d267d347 use g_ascii_isprint instead of c_isprint from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Pavel Hrdina
bbe0610625 use g_ascii_iscntrl instead of c_iscntrl from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:24 +01:00
Pavel Hrdina
c275ea93db use g_ascii_isalnum instead of c_isalnum from gnulib
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-10 13:49:23 +01:00
Peter Krempa
e8ae2ddbb1 doc: Document quirk of getting block job info for a 'backup' blockjob
The stats reported for a blockjob which is member of a domain pull
backup refer to the utilization of the scratch file rather than the
progress of the backup as the progress of the backup depends on the
client. Note this quirk in the docs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:58 +01:00
Peter Krempa
08b810053a Add 'backup' block job type
A backup job may consist of many backup sub-blockjobs. Add the new
blockjob type and add all type converter strings.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:57 +01:00
Eric Blake
c15b0cd601 backup: Implement virsh support for backup
Introduce virsh commands for performing backup jobs.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Peter Krempa
9e408454a8 API: Add domain job operation for backups
Introduce VIR_DOMAIN_JOB_OPERATION_BACKUP into virDomainJobOperation.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Peter Krempa
c3e18c13ca virsh: Implement VIR_DOMAIN_JOB_DISK_TEMP_(USED|TOTAL) in cmdDomjobinfo
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-12-10 12:41:56 +01:00
Jiri Denemark
5c7cd74a52 virsh: Add --tls-destination option for migrate command
This option can be used to override the destination host name used for
TLS verification.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
2019-12-09 10:11:58 +01:00
Peter Krempa
b1bf5efdc1 virsh: domjobinfo: Add switch to print raw fields
Introduce --rawstats which prints all statistics fields from the new API
similarly to how the virsh event handler prints them.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
7f3534a5bb virsh: domjobinfo: Allow printing stats also for failed and other jobs
Introduce the --anystats flag which does not skip the printing of the
stats if the job was unsuccessful.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
2a55bcd8da virsh: domjobinfo: Print also job operation for failed jobs
Printing that a job failed is rather unhelpful. Print at least the
operation which failed.

Achieve this by moving the check whether to print stats later but
replace it with a check which will skip printing of the operation if
there's no job.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
7884b40659 virsh: Implement VIR_DOMAIN_JOB_STATS_KEEP_COMPLETED for 'domjobinfo'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Peter Krempa
54a9d6e51e virsh: domain: Extract the code converting domain job stats to virDomainJobInfo
To simplify the stats printer code we convert the new statistics from
the typed parameter list into the old stats structure.

Extract this code since it takes a lot of space.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2019-12-03 15:26:53 +01:00
Michal Privoznik
d7dd4e1f89 nss: Don't fail on empty files
Before we rewrote nss plugin so that it doesn't use libvirt's
internal functions it used virLeaseReadCustomLeaseFile() to parse
.status files. After the rewrite it's using read() + yajl_parse()
+ yajl_complete_parse(). There's one catch though,
virLeaseReadCustomLeaseFile() skipped over empty files.

An empty .status file is created when a network is started. This
is because we configure dnsmasq to use our leasehelper. So the
first thing it does it calls it as follows:

  DNSMASQ_INTERFACE=virbr0 /usr/libexec/libvirt_leaseshelper init

which causes the leasehelper to create empty virbr0.status file.
If there is only one libvirt network then that is no problem -
there are no other .status files to parse anyway. But if there
are two or more networks then the first empty .status file causes
whole parsing process and subsequently the whole name lookup
process to fail.

Fixes: v5.7.0-rc1~343

Reported-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-28 15:37:41 +01:00
Pino Toscano
05d28facb5 virsh: limit completion of 'domhostname' to active domains
Getting the hostname of a guest usually requires a in-guest agent,
or generally can be determined only on active domains.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-22 11:36:51 +01:00
Ján Tomko
af5aa266ed g_mkstemp_full: pass O_RDWR
This flag is not implied by g_mkstemp_full, only by g_mkstemp.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Bjoern Walk <bwalk@linux.ibm.com>
Fixes: 4ac4773040
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-18 18:49:02 +01:00
Pavel Hrdina
43b01ef2d6 replace use of gnulib snprintf by g_snprintf
Glib implementation follows the ISO C99 standard so it's safe to replace
the gnulib implementation.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-15 15:07:40 +01:00
Jiri Denemark
7bd41cb62c virsh: Fix typo in the man page
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2019-11-15 09:34:20 +01:00
Jonathon Jongsma
95f5ac9ae5 Add API to change qemu agent response timeout
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.

This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.

One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').

Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds,  this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-11-14 19:10:01 +01:00
Ján Tomko
4ac4773040 Use g_mkstemp_full instead of mkostemp(s)
With g_mkstemp_full, there is no need to distinguish between
mkostemp and mkostemps (no suffix vs. a suffix of a fixed length),
because the GLib function looks for the XXXXXX pattern everywhere
in the string.

Use S_IRUSR | S_IWUSR for the permissions and do not pass O_RDWR
in flags since it's implied.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
2019-11-14 19:02:31 +01:00
Daniel Henrique Barboza
10d6290f1c tools: remove unneeded cleanup labels
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-11-12 17:54:01 +01:00
Michal Privoznik
8eaa708991 Use g_strdup_vprintf() instead of virVasprintf() everywhere
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Michal Privoznik
26a137093b tools: Use g_strdup_printf() instead of virAsprintf()
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-11-12 16:15:59 +01:00
Pavel Hrdina
137f71486c tools: stop distributing generated source files
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-11-08 17:07:57 +01:00
Peter Krempa
0967708b81 util: buffer: Remove virBufferCheckError
The function now does not return an error so we can drop it fully.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
205d6a2af7 util: buffer: Remove virBufferError
The function now does not return an error so we can drop it fully.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Peter Krempa
b2814b6a6f virsh: Reimplement _vshCalloc using g_malloc0_n
Drop the dead code by using glib's allocator.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-10-24 19:35:34 +02:00
Michal Privoznik
3b4df5d350 Drop needless ret variable
In few places we have the following code pattern:

  int ret;
  ... /* @ret is not accessed here */
  ret = f(...);
  return ret;

This pattern can be written less verbose:

  ...
  return f(...);

This patch was generated with following coccinelle spatch:

  @@
  type T;
  constant C;
  expression f;
  identifier ret;
  @@
  -T ret = C;
   ... when != ret
  -ret = f;
  -return ret;
  +return f;

Afterwards I needed to fix a few places, e.g. comment in
virDomainNetIPParseXML() was removed too because coccinelle
thinks it refers to @ret while in fact it doesn't. Also in few
places it replaced @ret declaration with a few spaces instead of
removing the line. But nothing terribly wrong.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-24 08:10:37 +02:00
Ján Tomko
506d313fa1 tools: use g_strdup instead of VIR_STRDUP
Replace all occurrences of
  if (VIR_STRDUP(a, b) < 0)
     /* effectively dead code */
with:
  a = g_strdup(b);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-21 12:51:59 +02:00
Ján Tomko
fbc5a15372 vsh: mark ctl as unused in vshReadline
My commit removed the last use in the version for platforms
without readline.

Fixes: c937c1d23d

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-10-21 11:11:04 +02:00
Ján Tomko
f31bdc7ced tools: delete vshStrdup
Now that we use g_strdup everywhere, delete vshStrdup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:17 +02:00
Ján Tomko
c937c1d23d tools: prefer g_strdup to vshStrdup
Remove all the uses of vshStrdup in favor of GLib's g_strdup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
7863f1547a tools: vshCommandArgvGetArg: prefer g_strdup
Remove the use of vshStrdup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
df329e94cb tools: vshCommandArgvGetArg: one parameter per line
Split the parameters to make changes more readable.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
fc941b2c54 virsh: getSignalNumber: use g_strdup
Eliminate the use of vshStrdup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
5c808a09a7 virsh: getSignalNumber: use g_autofree
Mark the 'str' variable as g_autofree and avoid the need for
a separate cleanup label.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
b6a8c9df4d virsh: getSignalNumber: rename variables
Use 'str' for the allocated copy of the string and 'p'
for the pointer into that string.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
76b4cd88f5 virsh: use g_strdup in virshDomainGetEditMetadata
Prefer GLib's g_strdup to vshStrdup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
d20f55c0f3 virsh: use g_strdup in cmdDomblkinfoGet
Prefer GLib's g_strdup to vshStrdup.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
Ján Tomko
4e66c38655 tools: cmdDomblkinfoGet: reindent parameters
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-10-20 14:37:16 +02:00
John Ferlan
88669478e9 tools: Use consistent error preservation and restoration calls
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.

Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 15:24:41 -04:00
Ján Tomko
4f7c65da27 tools: use g_steal_pointer instead of VIR_STEAL_PTR
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 15:59:42 +02:00
Ján Tomko
483a14f871 Remove all usage of VIR_RETURN_PTR
Prefer:
    return g_steal_pointer(&ptr);

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 15:59:41 +02:00
Ján Tomko
45678bd70a Use g_autoptr instead of VIR_AUTOPTR
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOPTR aliases to g_autoptr. Replace all of its use by the GLib
macro version.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
8334203f91 Use G_DEFINE_AUTOPTR_CLEANUP_FUNC instead of VIR_DEFINE_AUTOPTR_FUNC
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
1e2ae2e311 Use g_autofree instead of VIR_AUTOFREE
Since commit 44e7f02915
    util: rewrite auto cleanup macros to use glib's equivalent

VIR_AUTOFREE is just an alias for g_autofree. Use the GLib macros
directly instead of our custom aliases.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-16 12:06:43 +02:00
Ján Tomko
67e72053c1 Use G_N_ELEMENTS instead of ARRAY_CARDINALITY
Prefer the GLib version of the macro.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 16:14:19 +02:00
Ján Tomko
88131931b8 Use G_GNUC_FALLTHROUGH instead of ATTRIBUTE_FALLTHROUGH
Also define the macro for building with GLib older than 2.60

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 16:14:19 +02:00
Ján Tomko
da367c0f9b Use G_GNUC_PRINTF instead of ATTRIBUTE_FMT_PRINTF
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 16:14:18 +02:00
Ján Tomko
123196aa05 tools: use G_GNUC_UNUSED
Use G_GNUC_UNUSED from GLib instead of ATTRIBUTE_UNUSED.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 11:25:25 +02:00
Ján Tomko
2dec8c4760 Use G_GNUC_WARN_UNUSED_RESULT instead of ATTRIBUTE_RETURN_CHECK
Introduced in GLib 2.10.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-10-15 11:25:22 +02:00
Daniel P. Berrangé
27cb4c1a53 build: remove use of usleep gnulib module in favour of g_usleep
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.

The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-14 10:54:42 +01:00
Daniel P. Berrangé
6c748c8e2d util: use glib base64 encoding/decoding APIs
Replace use of the gnulib base64 module with glib's own base64 API family.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-14 10:54:42 +01:00
Daniel P. Berrangé
cfbe9f1201 build: link to glib library
Add the main glib.h to internal.h so that all common code can use it.

Historically glib allowed applications to register an alternative
memory allocator, so mixing g_malloc/g_free with malloc/free was not
safe.

This was feature was dropped in 2.46.0 with:

      commit 3be6ed60aa58095691bd697344765e715a327fc1
      Author: Alexander Larsson <alexl@redhat.com>
      Date:   Sat Jun 27 18:38:42 2015 +0200

        Deprecate and drop support for memory vtables

Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in

    commit 1f24b36607bf708f037396014b2cdbc08d67b275
    Author: Daniel P. Berrangé <berrange@redhat.com>
    Date:   Thu Sep 5 14:37:54 2019 +0100

        gmem: clarify that g_malloc always uses the system allocator

Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.

This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.

This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.

Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-14 10:54:42 +01:00
Daniel P. Berrangé
d5d6dbcfb5 build: remove all gnulib bit manipulation modules
We're using gnulib to get ffs, ffsl, rotl32, count_one_bits,
and count_leading_zeros. Except for rotl32 they can all be
replaced with gcc/clangs builtins. rotl32 is a one-line
trivial function.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-10-07 13:39:26 +01:00
Pavel Mores
5be0d28b3e fixed handling of sourceless disks in 'domblkinfo' cmd
virDomainGetBlockInfo() returns error if called on a disk with no
source (a sourceless disk might be a removable media drive with no
media in it, for instance an empty CDROM or floppy drive).

So far this caused the virsh domblkinfo --all command to abort and
ignore any remaining (not yet displayed) disk devices.  This patch
fixes the problem by first checking for existence of a <source>
element in the corresponding XML.  If none is found, we avoid calling
virDomainGetBlockInfo() altogether as we know it's bound to fail in
that case.

https://bugzilla.redhat.com/show_bug.cgi?id=1619625

Signed-off-by: Pavel Mores <pmores@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-10-07 14:13:06 +02:00
Daniel P. Berrangé
f4e1ef9d39 tools: fix regression passing command with virt-login-shell
It is documented that a command to run inside the container can be
passed with the -c arg.

  virt-login-shell -c "ls -l /"

This fixes

  commit 4feeb2d986
  Author: Daniel P. Berrangé <berrange@redhat.com>
  Date:   Thu Aug 1 10:58:31 2019 +0100

    tools: split virt-login-shell into two binaries

Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-30 12:08:30 +01:00
Michal Privoznik
9e08949e87 tools: Record NSS dependency on symbols file
If a symbol file for either of NSS modules is changed then
subsequent 'make' doesn't regenerate the library, because there
is no implicit dependency between the library and symbols file.
Put an explicit dependency into the Makefile then. Unfortunately,
setting _DEPENDENCIES makes us lose automake's generated
dependencies (see src/Makefile.am:592 for details). But
fortunately, the only dependency we had was _LIBADD variable.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-30 12:28:23 +02:00
Michal Privoznik
7af3682281 libvirt_nss.h: Separate function declarations with an empty line
I find it more readable that way.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-30 12:27:41 +02:00
Michal Privoznik
822f81c59e nss: Don't leak @addr in gethostbyname4()
Similarly to gethostbyname3(), the @addr must be freed on return
from the function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-30 12:27:22 +02:00
Michal Privoznik
e39100ac92 nss: Drop needless free() in gethostbyname3()
The findLease() function allocates @addr array iff no error
occurred and at least one satisfactory record was found.
Therefore, there is no need to call free() if findLease() failed,
or did not find any records as addr == NULL.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-30 12:26:30 +02:00
Michal Privoznik
b62ef64216 nss: Compare addresses iff their family matches
When parsing leases file, appendAddr() is called to append parsed
tuple (address, expiry time, family) into an array. Whilst doing
so, the array is searched for possible duplicate. This is done by
comparing each item of the array by passed @family: if @family is
AF_INET then the item is viewed as IPv4 address. Similarly, if
@family is AF_INET6 then the item is viewed as IPv6 address. This
is not exactly right - the array can contain addresses of both
families and thus the address family of each item of the array
must be considered.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2019-09-30 12:25:26 +02:00
Peter Krempa
73aaa8f8c8 virsh: Don't open-code virJSONStringReformat in cmdQemuMonitorCommand
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-19 14:31:15 +02:00
Peter Krempa
d2335ac577 virsh: Use VIR_AUTO machinery in cmdQemuMonitorCommand
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-19 14:31:15 +02:00
Peter Krempa
b088e27065 virsh: Use virshDomain type in 'inject-nmi'
With a nice side-effect of fixing alignment.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-19 14:31:15 +02:00
Peter Krempa
ec1ea11988 virsh: demonstrate use of VIR_AUTOPTR(virshDomain) on 'send-process-signal'
Refactor the command code to use the new type.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-19 14:31:14 +02:00
Peter Krempa
96143986ca virsh: Allow using VIR_AUTOPTR for releasing virDomainPtr in virsh
I opted to alias the 'virDomainType' to 'virshDomain' so that it's
obvious in all cases that this is a virsh-only construct. This is also
somewhat consistent with virsh's use of 'virshDomainFree' wrapper for
the freeing function which actually accepts NULL.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-09-19 14:31:14 +02:00
Daniel P. Berrangé
2e3e942f99 tools: fix XML validator detection of network port XML schema
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-12 16:06:57 +01:00
Daniel P. Berrangé
5c3def1dc2 tools: add virsh docs for network port commands
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-12 16:06:57 +01:00
Daniel P. Berrangé
b1b878c512 util: activate directory override when used from library
The Perl bindings for libvirt use the test driver for unit tests. This
tries to load the cpu_map/index.xml file, and when run from an
uninstalled build will fail.

The problem is that virFileActivateDirOverride is called by our various
binaries like libvirtd, virsh, but is not called when a 3rd party app
uses libvirt.so

To deal with this we allow the LIBVIRT_DIR_OVERRIDE=1 env variable to be
set and make virInitialize look for this. The 'run' script will set it,
so now build using this script to run against an uninstalled tree we
will correctly resolve files to the source tree.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-10 11:03:35 +01:00
Michal Privoznik
6bb4242d9f lib: Define and use autofree for virConfPtr
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
2019-09-10 09:34:37 +02:00
Jonathon Jongsma
7d5f0fda30 virsh: Fix help for net-port-delete
Apparently a copy/paste error. The net-port-delete help string was in
fact from net-port-dumpxml.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1747826

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-09-06 12:05:46 -04:00
Jim Fehlig
2171442d62 xenapi: remove driver
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-03 15:37:54 -06:00
Jiri Denemark
f4bdd82977 virsh: Rename --precopy-bandwidth migration option
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-09-02 18:26:25 +02:00
Jonathon Jongsma
fa3eaba680 virsh: alphabetize domain commands in man page
It appears that all commands were originally fully in alphabetical order
but as new commands were added, they were sometimes inserted out of
order.  Fix up all domain commands so that they're in alphabetical order
again.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-29 12:03:27 +02:00
Jonathon Jongsma
aab4b0cf8f virsh: add 'guestinfo' command
The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-29 12:03:27 +02:00
Jim Fehlig
3d1799192d virsh: Add support for setting bandwidth in migrate
Commit f15789ec added support for setting postcopy migration bandwidth to
the migrate subcommand. This change does the same for precopy migration.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-27 14:07:29 -06:00
Michal Privoznik
c10f09786d virsh: Allow graceful console shutdown
Currently, whenever there's a regular EOF on the console stream
or an error the virStreamAbort() is called regardless. While this
may not actually break anything, we should call virStreamFinish()
to let the daemon know we've successfully received all the data
and are shutting down the stream gracefully.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
2019-08-26 08:57:03 +02:00
Roman Bolshakov
277c8c4c9b tools: console: Relax stream EOF handling
Regular VM shutdown triggers the error for existing session of virsh
console and it returns with non-zero exit code:
  error: internal error: console stream EOF

The message and status code are misleading because there's no real
error. virStreamRecv returns 0 correctly when EOF is reached.

Existing implementations of esx, fd, and remote streams behave the same
for virStreamFinish and virStreamAbort: they close the stream. So, we
can continue to use virStreamAbort to handle EOF and errors from
virStreamRecv but additonally we can report error if virStreamAbort
fails.

Fixes: 29f2b5248c ("tools: console: pass stream/fd errors to user")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-23 14:21:26 +02:00
Michal Privoznik
7cfb7aab57 security_util: Remove stale XATTRs
It may happen that we leave some XATTRs behind. For instance, on
a sudden power loss, the host just shuts down without calling
restore on domain paths. This creates a problem, because when the
host starts up again, the XATTRs are there but they don't reflect
the true state and this may result in libvirt denying start of a
domain.

To solve this, save a unique timestamp (host boot time) among
with our XATTRs.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741140

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
2019-08-22 17:05:17 +02:00
Jiri Denemark
8a62a1592a Revert "configure: Remove --enable-test-coverage"
This reverts commit f38d553e2d.

Gnulib's make coverage (or init-coverage, build-coverage, gen-coverage)
is not a 1-1 replacement for the original configure option. Our old
--enable-test-coverage seems to be close to gnulib's make build-coverage
except gnulib runs lcov in that phase and the build actually fails for
me even before lcov is run. And since we want to be able to just build
libvirt without running lcov, I suggest reverting to our own
implementation.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-By: Eric Blake <eblake@redhat.com>
2019-08-14 09:28:06 +02:00
Daniel P. Berrangé
5b816e1696 build: don't hardcode /etc in the config related files
Substitute in the @sysconfigdir@ value instead of /etc.

Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-09 14:06:31 +01:00
Michal Privoznik
0dc84c347a nss: Don't leak memory on parse error
If yajl_parse() fails, we try to print an error message. For
that, yajl_get_error() is used. However, its documentation say
that caller is also responsible for freeing the memory it
allocates by using yajl_free_error().

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-09 12:17:19 +02:00
Michal Privoznik
fd21db659d nss: Include stdio.h and define NULLSTR when debugging is enabled
The NSS module has a compile time option which when enabled makes
ERROR() and DEBUG() print messages onto stderr. But now that the
module no longer links with libvirt, we need to include stdio.h
and define NULLSTR().

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-09 12:17:19 +02:00
Michal Privoznik
8be0ab638d nss: Don't stop parsing on unexpected key
Due to latest rewrite of NSS module, we are doing yajl parsing
ourselves. This means, we had to introduce couple of callback
that yajl calls. According to its documentation, a callback can
cancel parsing if it returns a zero value. Well, we do just that
in the string callback (findLeasesParserString()). If the JSON
file we are parsing contains a key that we are not interested in,
zero is returned meaning stop all parsing. This is not correct,
because the JSON file can contain some other keys which are not
harmful for our address translation (e.g. 'client-id').

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-08-09 12:17:19 +02:00
Michal Privoznik
a9e8f7f63d virsh: Introduce virshPoolTypeCompleter
This completer can be used to complete pool types.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:20:13 +02:00
Michal Privoznik
37dbf05f28 virsh-completer: Drop needless #include
Now that there is no code in virsh-completer.c it doesn't make
much sense to keep those #include-s around. Delete them.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:18:54 +02:00
Michal Privoznik
b6ea5fc2e9 tools: Separate checkpoint related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various checkpoint aspects)
into virsh-completer-checkpoint.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:18:19 +02:00
Michal Privoznik
3970753613 tools: Separate host related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
host (e.g. they complete various host aspects)
into virsh-completer-host.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:17:44 +02:00
Michal Privoznik
1bd11fff7a tools: Separate snapshot related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
snapshot (e.g. they complete various snapshot aspects)
into virsh-completer-snapshot.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:17:06 +02:00
Michal Privoznik
087354699a tools: Separate secret related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
secret (e.g. they complete various secret aspects)
into virsh-completer-secret.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:16:28 +02:00
Michal Privoznik
32d6275529 tools: Separate nwfilter related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nwfilter (e.g. they complete various nwfilter aspects)
into virsh-completer-nwfilter.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:15:36 +02:00
Michal Privoznik
597791e44b tools: Separate nodedev related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
nodedev (e.g. they complete various nodedev aspects)
into virsh-completer-nodedev.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:10:08 +02:00
Michal Privoznik
d327e1f0a2 tools: Separate network related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
networks (e.g. they complete various network aspects)
into virsh-completer-network.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:09:59 +02:00
Michal Privoznik
54041baa64 tools: Separate interface related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
interfaces (e.g. they complete various interface aspects)
into virsh-completer-interface.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:07:51 +02:00
Michal Privoznik
0d73bf96e0 tools: Separate storage volume related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
storage volumes (e.g. they complete various storage volume
aspects) into virsh-completer-volume.c

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:07:02 +02:00
Michal Privoznik
41c8b3b83c tools: Separate storage pool related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
storage pools (e.g. they complete various storage pool aspects)
into virsh-completer-pool.c.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:06:26 +02:00
Michal Privoznik
ca76fc3abe tools: Separate domain related completers into a file
Mixing all completers in one file does not support
maintainability. Separate those completers which relate to
domains (e.g. they complete various domain aspects) into
virsh-completer-domain.c.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:05:27 +02:00
Michal Privoznik
3afcc74af6 tools: Expose virshCommaStringListComplete()
In next commits the virsh-completer.c is going to be split into
smaller files. Expose virshCommaStringListComplete() so that it
can still be used from those new files.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
2019-08-09 09:05:02 +02:00