Add static virNetDevGetifaddrsAddress to attempt to get the interface
IP address. If getifaddrs is not supported, fall back to
virNetDevGetIPv4AddressIoctl to get the IP address.
This allows IPv6 addresses to be used for <listen type='network>
with device-backed networks.
https://bugzilla.redhat.com/show_bug.cgi?id=1192318
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PCS doesn't store domain config in managed save state file.
It's forbidden to change config for VMs in this state.
It's possible to change config for containers, but after
restoring domain will have that new config, not a config,
which domain had at the moment of virDomainManagedSave.
So we need to handle this case differently from other states.
Let's forbid this operation, if config is changed and if it's
not changed - just do nothing.
Openstack/nova calls virDomainDefineXML on resume with
current domain config, so we can't forbid this operation
in managed save state.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We should add input devices with proper bus,
not VIR_DOMAIN_INPUT_BUS_XEN.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Handle input devices in virDomainDefParseXML properly
in case of parallels containers and VMs.
Parallels containers support only
VIR_DOMAIN_INPUT_BUS_PARALLELS. And if VNC is enabled
we should add implicit mouse and keyboard.
For VMs we should add implicit PS/2 mouse and
keyboard.
BTW, is it worth to refactor code and move
all this code to drivers, to *DomainDefPostParse
functions?
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add VIR_DOMAIN_INPUT_BUS_PARALLELS device type
to handle domain configuration properly for
parallels containers, when VNC is enabled.
When domain configuration has at least one
'graphics', there should be mouse and keyboard.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Fix function virDomainVideoDefaultType for
parallels VMs and containers. It should return
VGA for VMs and VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for containers.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Network adapter model has no sense for container,
so we shouldn't set it to e1000 in
parallelsDomainDeviceDefPostParse.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
We handle this parameter for VMs while defining
domains, so let's get this property from PCS and
set corresponding field of virDomainNetDef in
prlsdkLoadDomains function.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Call virDomainDefAddImplicitControllers to add disk
controllers, so virDomainDef, filled by this function
will look exactly like the one returned by virDomainDefParseString.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Implement virDomainManagedSave api function. In PCS
this feature called "suspend". You can suspend VM or
CT while it is in running or paused state. And after
resuming (or starting) it will have the same state, as
before suspend.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Split function prlsdkDomainChangeState into
prlsdkDomainChangeStateLocked and prlsdkDomainChangeState.
So it can be used from places, where virDomainObj already
found and locked.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Return value of functions prlsdkStart/Kill/Stop e.t.c.
is PRL_RESULT in parallels_sdk.c and int in parallels_sdk.h.
PRL_RESULT is int, so compiler didn't report errors.
Let's fix the difference.
Signed-off-by: Dmitry Guryanov <dguryanov@parallels.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize a delete cgroup and pindef for the vcpu into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Future IOThread setting patches would copy the code anyway, so create
and generalize the add the vcpu to a cgroup into its own API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1206521
If the backend driver updates the pool available and/or allocation values,
then the storage_driver VolCreateXML, VolCreateXMLFrom, and VolDelete APIs
should not change the value; otherwise, it will appear as if the values
were "doubled" for each change. Additionally since unsigned arithmetic will
be used depending on the size and operation, either or both values could be
appear to be much larger than they should be (in the EiB range).
Currently only the disk pool updates the values, but other pools could.
Assume a "fresh" disk pool of 500 MiB using /dev/sde:
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 0.00 B
Available: 509.84 MiB
$ virsh vol-create-as disk-pool sde1 --capacity 300M
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 600.47 MiB
Available: 16.00 EiB
Following assumes disk backend updated to refresh the disk pool at deletion
of primary partition as well as extended partition:
$ virsh vol-delete --pool disk-pool sde1
Vol sde1 deleted
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 9.73 EiB
Available: 6.27 EiB
This patch will check if the backend updated the pool values and honor that
update.
Commit id '471e1c4e' only considered updating the pool if the extended
partition was removed. As it turns out removing a primary partition
would also need to update the freeExtent list otherwise the following
sequence would fail (assuming a "fresh" disk pool for /dev/sde of 500M):
$ virsh pool-info disk-pool
...
Capacity: 509.88 MiB
Allocation: 0.00 B
Available: 509.84 MiB
$ virsh vol-create-as disk-pool sde1 --capacity 300M
$ virsh vol-delete --pool disk-pool sde1
$ virsh vol-create-as disk-pool sde1 --capacity 300M
error: Failed to create vol sde1
error: internal error: no large enough free extent
$
This patch will refresh the pool, rereading the partitions, and
return
https://bugzilla.redhat.com/show_bug.cgi?id=1073305
When creating a volume in a pool, the creation allows the 'capacity'
value to be larger than the available space in the pool. As long as
the 'allocation' value will fit in the space, the volume will be created.
However, resizing the volume checks were made with the new absolute
capacity value against existing capacity + the available space without
regard for whether the new absolute capacity was actually allocating
space or not. For example, a pool with 75G of available space creates
a volume of 10G using a capacity of 100G and allocation of 10G will succeed;
however, if the allocation used a capacity of 10G instead and then tried
to resize the allocation to 100G the code would fail to allow the backend
to try the resize.
Furthermore, when updating the pool "available" and "allocation" values,
the resize code would just "blindly" adjust them regardless of whether
space was "allocated" or just "capacity" was being adjusted. This left
a scenario whereby a resize to 100G would fail; however, a resize to 50G
followed by one to 100G would both succeed. Again, neither was adjusting
the allocation value, just the "capacity" value.
This patch adds more logic to the resize code to understand whether the
new capacity value is actually "allocating" space as well and whether it
shrinking or expanding. Since unsigned arithmatic is involved, the possibility
that we adjust the pool size values incorrectly is probable.
This patch also ensures that updates to the pool values only occur if we
actually performed the allocation.
NB: The storageVolDelete, storageVolCreateXML, and storageVolCreateXMLFrom
each only updates the pool allocation/availability values by the target
volume allocation value.
Support for drive-reopen was never present in the upstream code so we
don't need to pause the VM when doing the block pivot. Kill all the
code related to this semi-upstream artifact.
lxc-enter-namespace stopped working on recent kernels (at least 3.19+)
due to /proc/PID/ns/* file descriptors being opened RW. From outside
the namespace these can only be opened RO.
/var/run may reside on a tmpfs and we fail to create the PID file if
/var/run/lxc does not exist.
Since commit 0a8addc1, the lxc driver's state directory isn't
automatically created before starting a domain. Now, the lxc driver
makes sure the state directory exists when it initializes.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
rfc3986 states that the separator in URI path is a single slash.
Multiple slashes may potentially lead to different resources and thus we
should not remove them.
Like we are doing in qemu driver (ea576ee543), lets call
virNumaSetupMemoryPolicy() only if really needed. Problem is, if
we numa_set_membind() child, there's no way to change it from the
daemon afterwards. So any later attempts to change the pinning
will fail. But in very weird way - CGroups will be set, but due
to membind child will not allocate memory from any other node.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
131,088 bytes in 16 blocks are definitely lost in loss record 2,174 of 2,176
at 0x4C29BFD: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4C2BACB: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x52A026F: virReallocN (viralloc.c:245)
by 0x52BFCB5: saferead_lim (virfile.c:1268)
by 0x52C00EF: virFileReadLimFD (virfile.c:1328)
by 0x52C019A: virFileReadAll (virfile.c:1351)
by 0x52A5D4F: virCgroupGetValueStr (vircgroup.c:763)
by 0x1DDA0DA3: qemuRestoreCgroupState (qemu_cgroup.c:805)
by 0x1DDA0DA3: qemuConnectCgroup (qemu_cgroup.c:857)
by 0x1DDB7BA1: qemuProcessReconnect (qemu_process.c:3694)
by 0x52FD171: virThreadHelper (virthread.c:206)
by 0x82B8DF4: start_thread (pthread_create.c:308)
by 0x85C31AC: clone (clone.S:113)
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Since the holdtime is not supported by VBOX SDK, it's being simulated
by sleeping before sending the key-up codes. The key-up codes are
auto-generated based on XT codeset rules (adding of 0x80 to key-down)
which results in the same behavior as for QEMU implementation.
https://bugzilla.redhat.com/show_bug.cgi?id=1198645
Once upon a time, there was a little domain. And the domain was pinned
onto a NUMA node and hasn't fully allocated its memory:
<memory unit='KiB'>2355200</memory>
<currentMemory unit='KiB'>1048576</currentMemory>
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
Oh little me, said the domain, what will I do with so little memory.
If I only had a few megabytes more. But the old admin noticed the
whimpering, barely audible to untrained human ear. And good admin he
was, he gave the domain yet more memory. But the old NUMA topology
witch forbade to allocate more memory on the node zero. So he
decided to allocate it on a different node:
virsh # numatune little_domain --nodeset 0-1
virsh # setmem little_domain 2355200
The little domain was happy. For a while. Until bad, sharp teeth
shaped creature came. Every process in the system was afraid of him.
The OOM Killer they called him. Oh no, he's after the little domain.
There's no escape.
Do you kids know why? Because when the little domain was born, her
father, Libvirt, called numa_set_membind(). So even if the admin
allowed her to allocate memory from other nodes in the cgroups, the
membind() forbid it.
So what's the lesson? Libvirt should rely on cgroups, whenever
possible and use numa_set_membind() as the last ditch effort.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently we check qemuCaps before starting the block job. But qemuCaps
isn't available on a stopped domain, which means we get a misleading
error message in this case:
# virsh domstate example
shut off
# virsh blockjob example vda
error: unsupported configuration: block jobs not supported with this QEMU binary
Move the qemuCaps check into the block job so that we are guaranteed the
domain is running.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
qemuMigrationCookieAddNBD is usually called from within an async
MIGRATION_OUT or MIGRATION_IN job, so it needs to start a nested job.
(The one exception is during the Begin phase when change protection
isn't enabled, but qemuDomainObjEnterMonitorAsync will behave the same
as qemuDomainObjEnterMonitor in this case.)
This bug was encountered with a libvirt client that repeatedly queries
the disk mirroring block job info during a migration. If one of these
queries occurs just as the Perform migration cookie is baked, libvirt
crashes.
Relevant logs are as follows:
6701: warning : qemuDomainObjEnterMonitorInternal:1544 : This thread seems to be the async job owner; entering monitor without asking for a nested job is dangerous
[1] 6701: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block","id":"libvirt-629"}
[2] 6699: info : qemuMonitorIOWrite:503 : QEMU_MONITOR_IO_WRITE: mon=0x7fefdc004700 buf={"execute":"query-block","id":"libvirt-629"}
[3] 6704: info : qemuMonitorSend:972 : QEMU_MONITOR_SEND_MSG: mon=0x7fefdc004700 msg={"execute":"query-block-jobs","id":"libvirt-630"}
[4] 6699: info : qemuMonitorJSONIOProcessLine:203 : QEMU_MONITOR_RECV_REPLY: mon=0x7fefdc004700 reply={"return": [...], "id": "libvirt-629"}
6699: error : qemuMonitorJSONIOProcessLine:211 : internal error: Unexpected JSON reply '{"return": [...], "id": "libvirt-629"}'
At [1] qemuMonitorBlockStatsUpdateCapacity sends its request, then waits
on mon->notify. At [2] the request is written out to the monitor socket.
At [3] qemuMonitorBlockJobInfo sends its request, and also waits on
mon->notify. The reply from the first request is received at [4].
However, qemuMonitorJSONIOProcessLine is not expecting this reply since
the second request hadn't completed sending. The reply is dropped and an
error is returned.
qemuMonitorIO signals mon->notify twice during its error handling,
waking up both of the threads waiting on it. One of them clears mon->msg
as it exits qemuMonitorSend; the other crashes:
qemuMonitorSend (mon=0x7fefdc004700, msg=<value optimized out>) at qemu/qemu_monitor.c:975
975 while (!mon->msg->finished) {
(gdb) print mon->msg
$1 = (qemuMonitorMessagePtr) 0x0
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
In order to change an existing domain we delete all existing devices and add
new from scratch. In case of network devices we should also delete corresponding
virtual networks (if any) before removing actual devices from xml. In the patch,
we do it by extending prlsdkDoApplyConfig with a new parameter, which stands for
old xml, and calling prlsdkDelNet every time old xml is specified.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The close callbacks hash are keyed by a UUID-string, but
virCloseCallbacksRun was attempting to remove them by raw UUID. This
patch ensures the callback entries are removed by UUID-string as well.
This bug caused problems when guest migrations were abnormally aborted:
# timeout --signal KILL 1 \
virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
Killed
# virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
error: Requested operation is not valid: domain 'example' is not being migrated
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
If a VM migration is aborted, a disk mirror may be failed by QEMU before
libvirt has a chance to cancel it. The disk->mirrorState remains at
_ABORT in this case, and this breaks subsequent mirrorings of that disk.
We should instead check the mirrorState directly and transition to _NONE
if it is already aborted. Do the check *after* aborting the block job in
QEMU to avoid a race.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
If virCloseCallbacksSet fails, qemuMigrationBegin must return NULL to
indicate an error occurred.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
The destination libvirt daemon in a migration may segfault if the client
disconnects immediately after the migration has begun:
# virsh -c qemu+tls://remote/system list --all
Id Name State
----------------------------------------------------
...
# timeout --signal KILL 1 \
virsh migrate example qemu+tls://remote/system \
--verbose --compressed --live --auto-converge \
--abort-on-error --unsafe --persistent \
--undefinesource --copy-storage-all --xml example.xml
Killed
# virsh -c qemu+tls://remote/system list --all
error: failed to connect to the hypervisor
error: unable to connect to server at 'remote:16514': Connection refused
The crash is in:
1531 void
1532 qemuDomainObjEndJob(virQEMUDriverPtr driver, virDomainObjPtr obj)
1533 {
1534 qemuDomainObjPrivatePtr priv = obj->privateData;
1535 qemuDomainJob job = priv->job.active;
1536
1537 priv->jobs_queued--;
Backtrace:
#0 at qemuDomainObjEndJob at qemu/qemu_domain.c:1537
#1 in qemuDomainRemoveInactive at qemu/qemu_domain.c:2497
#2 in qemuProcessAutoDestroy at qemu/qemu_process.c:5646
#3 in virCloseCallbacksRun at util/virclosecallbacks.c:350
#4 in qemuConnectClose at qemu/qemu_driver.c:1154
...
qemuDomainRemoveInactive calls virDomainObjListRemove, which in this
case is holding the last remaining reference to the domain.
qemuDomainRemoveInactive then calls qemuDomainObjEndJob, but the domain
object has been freed and poisoned by then.
This patch bumps the domain's refcount until qemuDomainRemoveInactive
has completed. We also ensure qemuProcessAutoDestroy does not return the
domain to virCloseCallbacksRun to be unlocked in this case. There is
similar logic in bhyveProcessAutoDestroy and lxcProcessAutoDestroy
(which call virDomainObjListRemove directly).
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
==19015== 968 (416 direct, 552 indirect) bytes in 1 blocks are definitely lost in loss record 999 of 1,049
==19015== at 0x4C2C070: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52ADF14: virAllocVar (viralloc.c:560)
==19015== by 0x5302FD1: virObjectNew (virobject.c:193)
==19015== by 0x1DD9401E: virQEMUDriverConfigNew (qemu_conf.c:164)
==19015== by 0x1DDDF65D: qemuStateInitialize (qemu_driver.c:666)
==19015== by 0x53E0823: virStateInitialize (libvirt.c:777)
==19015== by 0x11E067: daemonRunStateInit (libvirtd.c:905)
==19015== by 0x53201AD: virThreadHelper (virthread.c:206)
==19015== by 0xA1EE1F2: start_thread (in /lib64/libpthread-2.19.so)
==19015== by 0xA4EFC8C: clone (in /lib64/libc-2.19.so)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
==19015== 8 bytes in 1 blocks are definitely lost in loss record 34 of 1,049
==19015== at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x4C2C32F: realloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19015== by 0x52AD888: virReallocN (viralloc.c:245)
==19015== by 0x52AD97E: virExpandN (viralloc.c:294)
==19015== by 0x52ADC51: virInsertElementsN (viralloc.c:436)
==19015== by 0x5335864: virDomainVirtioSerialAddrSetAddController (domain_addr.c:816)
==19015== by 0x53358E0: virDomainVirtioSerialAddrSetAddControllers (domain_addr.c:839)
==19015== by 0x1DD5513B: qemuDomainAssignVirtioSerialAddresses (qemu_command.c:1422)
==19015== by 0x1DD55A6E: qemuDomainAssignAddresses (qemu_command.c:1711)
==19015== by 0x1DDA5818: qemuProcessStart (qemu_process.c:4616)
==19015== by 0x1DDF1807: qemuDomainObjStart (qemu_driver.c:7265)
==19015== by 0x1DDF1A66: qemuDomainCreateWithFlags (qemu_driver.c:7320)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
