Everytime a public API returns an error, libvirtd pollutes
syslog with that error message. Reduce the error logging
level to INFO so these don't appear by default.
* src/util/virterror.c: Log all errors at INFO
The virFork call resets all logging handlers that may have been
set. Re-enable them after fork in virExec, so that env variables
fir LIBVIRT_LOG_OUTPUTS and LIBVIRT_LOG_FILTERS take effect
until the execve()
* src/util/util.c: Preserve logging in child in virExec
To allow messages from different threads to be untangled,
include an integer thread identifier in log messages.
* src/util/logging.c: Include thread ID
* src/util/threads.h, src/util/threads.h, src/util/threads-pthread.c:
Add new virThreadSelfID() function
* configure.ac: Check for sys/syscall.h
Do this by adding a helper function to get the persistent domain config. This
should be useful for other functions that may eventually want to alter
the persistent domain config (attach/detach device). Also make similar changes
to the test drivers setvcpus command.
A caveat is that the function will return the running config for a transient
domain, rather than error. This simplifies callers, as long as they use
other methods to ensure the guest is persistent.
Doing 'virsh setvcpus $vm --config 10' doesn't check the value against the
domains maxvcpus value. A larger value for example will prevent the guest
from starting.
Also make a similar change to the test driver.
The current semantics of non-persistent hotplug/update are confusing: the
changes will persist as long as the in memory domain definition isn't
overwritten. This means hotplug changes stay around until the domain is
redefined or libvirtd is restarted.
Call virDomainObjSetDefTransient at VM startup, so that we properly discard
hotplug changes when the VM is shutdown.
This function sets the running domain definition as transient, by reparsing
the persistent config and assigning it to newDef. This ensures that any
changes made to the running definition and not the persistent config are
discarded when the VM is shutdown.
This patch makes two corrections to the newly-added QED support patch series:
- Correct the QED header field offsets
- Remove XML parsing for VIR_STORAGE_FILE_AUTO_SAFE
Signed-off-by: Adam Litke <agl@us.ibm.com>
The IP address learning thread was causing a deadlock when it instantiated a filter while a filter update/change was ongoing. The reason for this was the ordering of locks due to the following calls
virNWFilterUnlockFilterUpdates()
virNWFilterPoolObjFindByName()
The below patch now puts the order of the locks in the above shown order when instantiating the filter from the IP address learning thread.
Implement getBackingStore() for QED images. The header format is defined in
the QED spec: http://wiki.qemu.org/Features/QED .
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefan.hajnoczi@uk.ibm.com>
Cc: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Add an entry in fileTypeInfo for QED image files.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefan.hajnoczi@uk.ibm.com>
Cc: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Disk image formats that wish to opt-out of version validation are supposed to
set versionOffset to -1 in their fileTypeInfo entry.
By unconditionally returning False for these formats,
virStorageFileMatchesVersion() incorrectly reports a version mismatch when the
test was actually skipped. The correct behavior is to return True so these
formats can be successfully probed using the magic bytes alone.
Signed-off-by: Adam Litke <agl@us.ibm.com>
The code in SELinuxRestoreSecurityChardevLabel() was trying to
use SELinuxSetFilecon directly for devices or file types while
it should really use SELinuxRestoreSecurityFileLabel encapsulating
routine, which avoid various problems like resolving symlinks,
making sure he file exists and work around NFS problems
Include locale.h for setlocale().
Revert the usage string back to it's original form.
Use puts() instead of fputs(), as fputs() expects a FILE*.
Add closing parenthesis to some vah_error() calls.
Use argv[0] instead of an undefined argv0.
These messages are visible to the user, so they should be
consistently translated.
* cfg.mk (msg_gen_function): Add vah_error, vah_warning.
* src/security/virt-aa-helper.c: Translate messages.
(catchXMLError): Fix capitalization.
Per the gettext developer:
http://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00019.htmlhttp://lists.gnu.org/archive/html/bug-gnu-utils/2010-10/msg00021.html
gettext() doesn't work correctly on all platforms unless you have
called setlocale(). Furthermore, gnulib's gettext.h has provisions
for setting up a default locale, which is the preferred method for
libraries to use gettext without having to call textdomain() and
override the main program's default domain (virInitialize already
calls bindtextdomain(), but this is insufficient without the
setlocale() added in this patch; and a redundant bindtextdomain()
in this patch doesn't hurt, but serves as a good example for other
packages that need to bind a second translation domain).
This patch is needed to silence a new gnulib 'make syntax-check'
rule in the next patch.
* daemon/libvirtd.c (main): Setup locale and gettext.
* src/lxc/lxc_controller.c (main): Likewise.
* src/security/virt-aa-helper.c (main): Likewise.
* src/storage/parthelper.c (main): Likewise.
* tools/virsh.c (main): Fix exit status.
* src/internal.h (DEFAULT_TEXT_DOMAIN): Define, for gettext.h.
(_): Simplify definition accordingly.
* po/POTFILES.in: Add src/storage/parthelper.c.
I am replacing the last instances of close() I found with VIR_CLOSE() / VIR_FORCE_CLOSE respectively.
The first part patches virsh, which I missed out on previously.
The 2nd patch I had left out intentionally to look at it more carefully:
The 'closed' variable could be easily removed since it wasn't used anywhere else. The possible race condition that could result from the filedescriptor being closed and not set to -1 (and possibly let us write into 'something' totally different if the fd was allocated by another thread) seems to be prevented by the qemuMonitorLock() already placed around the code that reads from or writes to the fd. So the change of this code as shown in the patch should not have any side-effects.
Rather than only cleaning any remaining ebtables rules, also clean those applied to iptables and ip6tables when detecting the IP address of an interface. Previous applied iptables rules may hinder DHCP packets.
Similarly to deprecating close(), I am now deprecating fclose() and
introduce VIR_FORCE_FCLOSE() and VIR_FCLOSE(). Also, fdopen() is replaced with
VIR_FDOPEN().
Most of the files are opened in read-only mode, so usage of
VIR_FORCE_CLOSE() seemed appropriate. Others that are opened in write
mode already had the fclose()< 0 check and I converted those to
VIR_FCLOSE()< 0.
I did not find occurrences of possible double-closed files on the way.
Currently only support domain start and shutdown, for domain start,
record timestamp before the qemu command line, and for domain shutdown,
just say it's shutting down with timestamp.
* src/qemu/qemu_driver.c (qemudStartVMDaemon, qemudShutdownVMDaemon
introduced two macros - START_POSTFIX, SHUTDOWN_POSTFIX)
* src/nwfilter/nwfilter_ebiptables_driver.c
(ebiptablesWriteToTempFile): Use /bin/sh.
(bash_cmd_path): Delete.
(ebiptablesDriverInit, ebiptablesDriverShutdown): No need to
search for bash.
(CMD_EXEC): Prefer $() over ``, since we can assume POSIX.
(iptablesSetupVirtInPost): Use portable 'test' syntax.
(iptablesLinkIPTablesBaseChain): Use POSIX $(()) syntax.
This is more flexible regarding the location of the python binary
but doesn't allow to pass the -u flag. The -i flag can be passed
from inside the script using the PYTHONINSPECT env variable.
This fixes a problem with the esx_vi_generator.py on FreeBSD.
This makes the storage driver fail when the connection is
opened with the VIR_CONNECT_RO flag, resulting in a read-only
connection with no storage driver.
In a first step I am converting the netlink message construction in
macvtap code to use libnl. It's pretty much a 1:1 conversion except that
now the message needs to be allocated and deallocated.
When <uuid> is not in the XML, a virUUIDGenerate() ends up being called which
is unnecessary and can lead to crashes if /dev/urandom isn't available
because virRandomInitialize() is not called within virt-aa-helper. This patch
adds verify_xpath_context() and updates caps_mockup() to use it.
Bug-Ubuntu: https://launchpad.net/bugs/672943
If virDomainAttachDevice() was called with an image that was located
on a root-squashed NFS server, and in a directory that was unreadable
by root on the machine running libvirtd, the attach would fail due to
an attempt to change the selinux label of the image with EACCES (which
isn't covered as an ignore case in SELinuxSetFilecon())
NFS doesn't support SELinux labelling anyway, so we mimic the failure
handling of commit 93a18bbafa, which
just ignores the errors if the target is on an NFS filesystem (in
SELinuxSetSecurityAllLabel() only, though.)
This can be seen as a follow-on to commit
347d266c51, which ignores file open
failures of files on NFS that occur directly in
virDomainDiskDefForeachPath() (also necessary), but does not ignore
failures in functions that are called from there (eg
SELinuxSetSecurityFileLabel()).
Introduce implementations of the virDomainOpenConsole() API
for LXC, Xen and UML drivers.
* src/lxc/lxc_driver.c, src/lxc/lxc_driver.c,
src/xen/xen_driver.c: Wire up virDomainOpenConsole
The util/threads.c/h code already has APIs for mutexes,
condition variables and thread locals. This commit adds
in code for actually creating threads.
* src/libvirt_private.syms: Export new symbols
* src/util/threads.h: Define APIs virThreadCreate, virThreadSelf,
virThreadIsSelf and virThreadJoin
* src/util/threads-win32.c, src/util/threads-win32.h: Win32
impl of threads
* src/util/threads-pthread.c, src/util/threads-pthread.h: POSIX
impl of threads
This provides an implementation of the virDomainOpenConsole
API with the QEMU driver. For the streams code, this reuses
most of the code previously added for the tunnelled migration
streams since it is generic.
* src/qemu/qemu_driver.c: Support virDomainOpenConsole
To avoid the need for duplicating implementations of virStream
drivers, provide a generic implementation that can handle any
FD based stream. This code is copied from the existing impl
in the QEMU driver, with the locking moved into the stream
impl, and addition of a read callback
The FD stream code will refuse to operate on regular files or
block devices, since those can't report EAGAIN properly when
they would block on I/O
* include/libvirt/virterror.h, include/libvirt/virterror.h: Add
VIR_FROM_STREAM error domain
* src/qemu/qemu_driver.c: Remove code obsoleted by the new
generic streams driver.
* src/fdstream.h, src/fdstream.c, src/fdstream.c,
src/libvirt_private.syms: Generic reusable FD based streams
Now that bi-directional, non-blocking streams are supported
in the remote driver, some of the VIR_WARN statements need
to be reduced to VIR_DEBUG.
* src/remote/remote_driver.c: Lower logging level
This provides an implementation of the virDomainOpenConsole
API for the remote driver client and server.
* daemon/remote.c: Server side impl
* src/remote/remote_driver.c: Client impl
* src/remote/remote_protocol.x: Wire definition
To enable virsh console (or equivalent) to be used remotely
it is necessary to provide remote access to the /dev/pts/XXX
pseudo-TTY associated with the console/serial/parallel device
in the guest. The virStream API provide a bi-directional I/O
stream capability that can be used for this purpose. This
patch thus introduces a virDomainOpenConsole API that uses
the stream APIs.
* src/libvirt.c, src/libvirt_public.syms,
include/libvirt/libvirt.h.in, src/driver.h: Define the
new virDomainOpenConsole API
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
src/remote/remote_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
src/xen/xen_driver.c, src/xenapi/xenapi_driver.c: Stub
API entry point
The current remote driver code for streams only supports
blocking I/O mode. This is fine for the usage with migration
but is a problem for more general use cases, in particular
bi-directional streams.
This adds supported for the stream callbacks and non-blocking
I/O. with the minor caveat is that it doesn't actually do
non-blocking I/O for sending stream data, only receiving it.
A future patch will try to do non-blocking sends, but this is
quite tricky to get right.
* src/remote/remote_driver.c: Allow non-blocking I/O for
streams and support callbacks
The /dev/console device inside the container must NOT map
to the real /dev/console device node, since this allows the
container control over the current host console. A fun side
effect of this is that starting a container containing a
real Fedora OS will kill off your X server.
Remove the /dev/console node, and replace it with a symlink
to the primary console TTY
* src/lxc/lxc_container.c: Replace /dev/console with a
symlink to /dev/pty/0
* src/lxc/lxc_controller.c: Remove /dev/console from cgroups
ACL
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.
This has been requested for RHEV:
https://bugzilla.redhat.com/show_bug.cgi?id=626305
v2: Change flag name, bool cleanups
I am trying to use a qcow image with libvirt where the backing 'file' is a
qemu-nbd server. Unfortunately virDomainDiskDefForeachPath() assumes that
backingStore is always a real file so something like 'nbd:0:3333' is rejected
because a file with that name cannot be accessed. Note that I am not worried
about directly using nbd images. That would require a new disk type with XML
markup, etc. I only want it to be permitted as a backingStore
The following patch implements danpb's suggestion:
> I think I'm inclined to push the logic for skipping NBD one stage higher.
> I'd rather expect virStorageFileGetMetadata() to return all backing
> stores, even if not files. The virDomainDiskDefForeachPath() method
> should definitely ignore non-file backing stores though.
>
> So what I'm thinking is to extend the virStorageFileMetadata struct and
> just add a 'bool isFile' field to it. Default this field to true, unless
> you see the prefix of nbd: in which case set it to false. The
> virDomainDiskDefForeachPath() method can then skip over any backing
> store with isFile == false
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
xencapstest calls xenHypervisorMakeCapabilitiesInternal with conn == NULL
which calls xenDaemonNodeGetTopology with conn == NULL when a recent
enough Xen was detected (sys_interface_version >= SYS_IFACE_MIN_VERS_NUMA).
But xenDaemonNodeGetTopology insists in having conn != NULL and fails,
because it expects to be able to talk to an actual xend.
We cannot do that in a 'make check' test. Therefore, only call the xend
subdriver function when conn isn't NULL.
Reported by Andy Howell and Jim Fehlig.
Using automated replacement with sed and editing I have now replaced all
occurrences of close() with VIR_(FORCE_)CLOSE() except for one, of
course. Some replacements were straight forward, others I needed to pay
attention. I hope I payed attention in all the right places... Please
have a look. This should have at least solved one more double-close
error.
This extends the SPICE XML to allow channel security options
<graphics type='spice' port='-1' tlsPort='-1' autoport='yes'>
<channel name='main' mode='secure'/>
<channel name='record' mode='insecure'/>
</graphics>
Any non-specified channel uses the default, which allows both
secure & insecure usage
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/libvirt_private.syms: Add XML syntax for specifying per
channel security options for spice.
* src/qemu/qemu_conf.c: Configure channel security with spice
QEMU crashes & burns if you try multiple Cirrus video cards, but
QXL copes fine. Adapt QEMU config code to allow multiple QXL
video cards
* src/qemu/qemu_conf.c: Support multiple QXL video cards
This extends the XML syntax for <graphics> to allow a password
expiry time to be set
eg
<graphics type='vnc' port='5900' autoport='yes' keymap='en-us' passwd='12345' passwdValidTo='2010-04-09T15:51:00'/>
The timestamp is in UTC.
* src/conf/domain_conf.h: Pull passwd out into separate struct
virDomainGraphicsAuthDef to allow sharing between VNC & SPICE
* src/conf/domain_conf.c: Add parsing/formatting of new passwdValidTo
argument
* src/opennebula/one_conf.c, src/qemu/qemu_conf.c, src/qemu/qemu_driver.c,
src/xen/xend_internal.c, src/xen/xm_internal.c: Update for changed
struct containing VNC password
In common with VNC, the QEMU driver configuration file is used
specify the host level TLS certificate location and a default
password / listen address
* src/qemu/qemu.conf: Add spice_listen, spice_tls,
spice_tls_x509_cert_dir & spice_password config params
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Parsing of
spice config parameters and updating -spice arg generation
to use them
* tests/qemuxml2argvdata/qemuxml2argv-graphics-spice-rhel6.args,
tests/qemuxml2argvtest.c: Expand test case to cover driver
level configuration
This supports the -spice argument posted for review against
the latest upstream QEMU/KVM. This supports the bare minimum
config with port, TLS port & listen address. The x509 bits are
added in a later patch.
* src/qemu_conf.c, src/qemu_conf.h: Add SPICE flag. Check for
-spice availability. Format -spice arg for command line
* qemuhelptest.c: Add SPICE flag
* qemuxml2argvdata/qemuxml2argv-graphics-spice.args: Add <graphics>
for spice
* qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Add -spice arg
* qemuxml2argvtest.c: Add SPICE flag
This supports the '-vga qxl' parameter in upstream QEMU/KVM
which has SPICE support added. This isn't particularly useful
until you get the next patch for -spice support. Also note that
while the libvirt XML supports multiple video devices, this
patch only supports a single one. A later patch can add support
for 2nd, 3rd, etc PCI devices for QXL
* src/qemu/qemu_conf.h: Flag for QXL support
* src/qemu/qemu_conf.c: Probe for '-vga qxl' support and implement it
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-spice.xml: Test
case for generating spice args with RHEL6 kvm
This adds an element
<graphics type='spice' port='5903' tlsPort='5904' autoport='yes' listen='127.0.0.1'/>
This is the bare minimum that should be exposed in the guest
config for SPICE. Other parameters are better handled as per
host level configuration tunables
* docs/schemas/domain.rng: Define the SPICE <graphics> schema
* src/domain_conf.h, src/domain_conf.c: Add parsing and formatting
for SPICE graphics config
* src/qemu_conf.c: Complain about unsupported graphics types
* src/qemu_conf.c: Add dummy entry in enumeration
* docs/schemas/domain.rng: Add 'qxl' as a type for the <video> tag
* src/domain_conf.c, src/domain_conf.h: Add QXL to video type
enumerations
There is no point in trying to fill params beyond the first error,
because when lxcDomainGetMemoryParameters returns -1 then the caller
cannot detect which values in params are valid.
The patch is based on the possiblity in the QEmu command line to
add -smbios options allowing to override the default values picked
by QEmu. We need to detect this first from QEmu help output.
If the domain is defined with smbios to be inherited from host
then we pass the values coming from the Host own SMBIOS, but
if the domain is defined with smbios to come from sysinfo, we
use the ones coming from the domain definition.
* src/qemu/qemu_conf.h: add the QEMUD_CMD_FLAG_SMBIOS_TYPE enum
value
* src/qemu/qemu_conf.c: scan the help output for the smbios support,
and if available add support based on the domain definitions,
and host data
* tests/qemuhelptest.c: add the new enum in the outputs
Move existing routines about virSysinfoDef to an util module,
add a new entry point virSysinfoRead() to read the host values
with dmidecode
* src/conf/domain_conf.c src/conf/domain_conf.h src/util/sysinfo.c
src/util/sysinfo.h: move to a new module, add virSysinfoRead()
* src/Makefile.am: handle the new module build
* src/libvirt_private.syms: new internal symbols
* include/libvirt/virterror.h src/util/virterror.c: defined a new
error code for that module
* po/POTFILES.in: add new file for translations
the element has a mode attribute allowing only 3 values:
- emulate: use the smbios emulation from the hypervisor
- host: try to use the smbios values from the node
- sysinfo: grab the values from the <sysinfo> fields
* docs/schemas/domain.rng: extend the schemas
* src/conf/domain_conf.h: add the flag to the domain config
* src/conf/domain_conf.h: parse and serialize the smbios if present
* src/conf/domain_conf.h: defines a new internal type added to the
domain structure
* src/conf/domain_conf.c: parsing and serialization of that new type
During a shutdown/restart cycle libvirtd forgot the macvtap device name that it had created on behalf of a VM so that a stale macvtap device remained on the host when the VM terminated. Libvirtd has to actively tear down a macvtap device and it uses its name for identifying which device to tear down.
The solution is to not blank out the <target dev='...'/> completely, but only blank it out on VMs that are not active. So, if a VM is active, the device name makes it into the XML and is also being parsed. If a VM is not active, the device name is discarded.
virPipeReadUntilEOF is used to read the stdout of exec'ed
and this could fail to capture the full output and read only
1024 bytes.
The problem is that this is based on a poll loop, and in the
loop we read at most 1024 bytes per file descriptor, but we also
note in the loop if poll indicates that the process won't output
more than that on that fd by setting finished[i] = 1.
The simplest way is that if we read a full buffer make sure
finished[i] is still 0 because we will need another pass in the
loop.
The remoteIO() method has wierd calling conventions, where
it is passed a pre-allocated 'struct remote_call *' but
then free()s it itself, instead of letting the caller free().
This fixes those weird semantics
* src/remote/remote_driver.c: Sanitize semantics of remoteIO
method wrt to memory release
A couple of places in the text monitor were overwriting the
'ret' variable with a >= 0 value before success was actually
determined. So later error paths would not correctly return
the -1 value. The drive_add code was not checking for errors
like missing command
* src/qemu/qemu_monitor_text.c: Misc error handling fixes
NFS in root squash mode may prevent opening disk images to
determine backing store. Ignore errors in this scenario.
* src/security/security_selinux.c: Ignore open failures on disk
images
NFS does not support file labelling, so ignore this error
for stdin_path when on NFS.
* src/security/security_selinux.c: Ignore failures on labelling
stdin_path on NFS
* src/util/storage_file.c, src/util/storage_file.h: Refine
virStorageFileIsSharedFS() to allow it to check for a
specific FS type.
Commit 06f81c63eb attempted to make
QEMU driver ignore the failure to relabel 'stdin_path' if it was
on NFS. The actual result was that it ignores *all* failures to
label any aspect of the VM, unless stdin_path is non-NULL and
is not on NFS.
* src/qemu/qemu_driver.c: Treat all relabel failures as terminal
* src/xen/xend_internal.c (xenDaemonFormatSxpr): Hoist verify
outside of function to avoid a -Wnested-externs warning.
* src/xen/xm_internal.c (xenXMDomainConfigFormat): Likewise.
Reported by Daniel P. Berrange.
* src/xen/xen_hypervisor.c (MAX_VIRT_CPUS): Move...
* src/xen/xen_driver.h (MAX_VIRT_CPUS): ...so all xen code can see
same value.
* src/xen/xend_internal.c (sexpr_to_xend_domain_info)
(xenDaemonDomainGetVcpusFlags, xenDaemonParseSxpr)
(xenDaemonFormatSxpr): Work if MAX_VIRT_CPUS is 64 on a platform
where long is 64-bits.
* src/xen/xm_internal.c (xenXMDomainConfigParse)
(xenXMDomainConfigFormat): Likewise.
Add dump_image_format[] to qemu.conf and support compressed dump
at virsh dump. coredump compression is important for saving disk space
in an environment where multiple guests run.
In general, "disk space for dump" is specially allocated and will be
a dead space in the system. It's used only at emergency. So, it's better
to have both of save_image_format and dump_image_format. "save" is done
in scheduled manner with enough calculated disk space for it.
This code reuses some of save_image_format[] and supports the same format.
Changelog:
- modified libvirtd_qemu.aug
- modified test_libvirtd_qemu.aug
- fixed error handling of qemudSaveCompressionTypeFromString()
When we mount any cgroup without "-o devices", we will fail to start vms:
error: Failed to start domain vm1
error: Unable to deny all devices for vm1: No such file or directory
When we mount any cgroup without "-o cpu", we will fail to get schedinfo:
Scheduler : posix
error: unable to get cpu shares tunable: No such file or directory
We should only use the cgroup controllers which are mounted on host.
So I add virCgroupMounted() for qemuCgroupControllerActive()
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
