Commit Graph

13 Commits

Author SHA1 Message Date
Daniel P. Berrange
4b16b9c77f Include socket address in client probe data
It is useful to know where the client is connecting from,
so include the socket address in probe data.

* daemon/libvirtd.h: Use virSocketAddr for storing client
  address and keep printable address handy for logging
* daemon/libvirtd.c: Include socket address in client
  connect/disconnect probes
* daemon/probes.d: Add socket address to probes
* examples/systemtap/client.stp: Print socket address
* src/util/network.h: Add sockaddr_un to virSocketAddr union
2010-10-22 12:00:45 +01:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Chris Lalancette
337d201ef2 Qemu remote protocol.
Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number.  This allows us to easily
distinguish it from the normal REMOTE protocol.

This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).

Changes since v1:
 - Fixed up a couple of script problems in remote_generate_stubs.pl
 - Switch an int flag to a bool in dispatch.c

Changes since v2:
 - None

Changes since v3:
 - Change unsigned proc to signed proc, to conform to spec

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:33 -04:00
Daniel P. Berrange
53fc1d8afd Ensure UNIX domain sockets are removed on daemon shutdown
When libvirtd exits it is leaving UNIX domain sockets on
the filesystem. These need to be removed.

The qemudInitPaths() method has signficant code churn to
switch from using a pre-allocated buffer on the stack, to
dynamically allocating on the heap.

* daemon/libvirtd.c, daemon/libvirtd.h: Store a reference
  to the UNIX domain socket path and unlink it on shutdown
2010-06-08 15:05:37 +01:00
Daniel P. Berrange
097e07a63a Remote driver & daemon impl of new event API
This wires up the remote driver to handle the new events APIs.
The public API allows an application to request a callback filters
events to a specific domain object, and register multiple callbacks
for the same event type. On the wire there are two strategies for
this

 - Register multiple callbacks with the remote daemon, each
   with filtering as needed
 - Register only one callback per event type, with no filtering

Both approaches have potential inefficiency. In the first scheme,
the same event gets sent over the wire many times if multiple
callbacks are registered. With the second scheme, unneccessary
events get sent over the wire if a per-domain filter is set on
the client. The second scheme is far easier to implement though,
so this patch takes that approach.

* daemon/dispatch.h: Don't export remoteRelayDomainEvent since it
  is no longer needed for unregistering callbacks, instead the
  unique callback ID is used
* daemon/libvirtd.c, daemon/libvirtd.h: Track and unregister
  callbacks based on callback ID, instead of function pointer
* daemon/remote.c: Switch over to using virConnectDomainEventRegisterAny
  instead of legacy virConnectDomainEventRegister function. Refactor
  remoteDispatchDomainEventSend() to cope with arbitrary event types
* src/driver.h, src/driver.c: Move verify() call into source file
  instead of header, to avoid polluting the global namespace with
  the verify function name
* src/remote/remote_driver.c: Implement new APIs for event
  registration. Refactor processCallDispatchMessage() to cope
  with arbitrary incoming event types. Merge remoteDomainQueueEvent()
  into processCallDispatchMessage() to avoid duplication of code.
  Rename remoteDomainReadEvent() to remoteDomainReadEventLifecycle()
* src/remote/remote_protocol.x: Define wire format for the new
  virConnectDomainEventRegisterAny and virConnectDomainEventDeregisterAny
  functions
2010-03-26 13:52:29 +00:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Daniel P. Berrange
50b6c95d62 Make all bitfields unsigned ints to avoid unexpected values in casts
The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints

* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
  src/conf/network_conf.h: Change bitfields to unsigned int.
2010-01-20 16:33:02 +00:00
Cole Robinson
438fa79358 daemon: Don't blindly unregister domain events
The daemon will attempt to unregister domain events on client disconnect,
even if no events were ever registered. This raises an unneeded error.

Track in the qemu_client structure if events have been registered, and
check this when performing cleanup.
2010-01-13 14:24:13 -05:00
Daniel P. Berrange
075bb5f1aa Move libvirtd event loop into background thread
The virStateInitialize() call for starting up stateful drivers
may require that the event loop is running already. This it is
neccessary to start the event loop before this call. At the
same time, network clients must not be processed until afte
virStateInitialize has completed.

The qemudListenUnix() and remoteListenTCP() methods must
therefore not register file handle watches, merely open the
network sockets & listen() on them. This means clients can
connected and are queued, pending completion of initialization

The qemudRunLoop() method is moved into a background thread
that is started early to allow access to the event loop during
driver initialization. The main process thread leader pretty
much does nothing once the daemon is running, merely waits
for the event loop thread to quit

* daemon/libvirtd.c, daemon/libvirtd.h: Move event loop into
  a background thread
* daemon/THREADING.txt: Rewrite docs to better reflect reality
2009-11-03 14:45:43 -05:00
Daniel P. Berrange
a71f79c37e Pull signal setup code out into separate method
* daemon/libvirtd.c: Introduce a daemonSetupSignals() method
  and put all signal handling code there
* daemon/libvirtd.h: Add sigread/sigwrite to qemud_server type
2009-11-02 11:41:35 -05:00
Daniel P. Berrange
4f17809a36 Handle outgoing data streams in libvirtd
* daemon/dispatch.c: Set streamTX flag on outgoing data packets
* daemon/qemud.h: Add streamTX flag to track outgoing data
* daemon/qemud.c: Re-enable further TX when outgoing data packet
  has been fully sent.
* daemon/stream.h, daemon/stream.c: Add method for enabling TX.
  Support reading from streams and transmitting data out to client
2009-09-29 15:48:58 +01:00
Daniel P. Berrange
11573f3ec1 Helper functions for processing data streams in libvirtd
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.

* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
  creating new streams, associating streams with clients, finding
  existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
  for the 'enum remote_message_type' for encoding stream data
  in wire messages. Add a new 'REMOTE_CONTINUE' constant to
  'enum remote_message_status' to indicate further data stream
  messsages are expected to follow.  Document how the
  remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
  sent to client is always type=REMOTE_REPLY. It may now
  also be type=REMOTE_STREAM. Add convenient method for
  sending outgoing stream data packets. Log and ignore
  non-filtered incoming stream packets. Add a method for
  serializing a stream error message
* daemon/dispatch.h:  Add API for serializing stream errors
  and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
  active data streams for clients. Tweak filter function
  operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
  which have been fully transmitted into separate method.
  Release all active streams when client shuts down. Change
  filter function to be responsible for queueing the message
2009-09-29 15:48:58 +01:00
Daniel P. Berrange
c00c6d038c Rename daemon main code
* daemon/qemud.c: Rename to daemon/libvirtd.c
* daemon/qemud.h: Rename to daemon/libvirtd.h
* daemon/Makefile.am, daemon/dispatch.h, daemon/mdns.c,
  daemon/remote.h: Update for renamed libvirtd.h file
2009-09-21 14:41:45 +01:00