Update the capabilities from a non-upstream version (9c70209b63 is not
in qemu.git) to qemu upstream commit 33d6099906 (2019/06/18) so that we
get the QMP schema 'features' field support and are able to detect that
the 'file' block backend supports dynamic auto-read-only.
Note that I've rebuilt this on a machine with a more modern kernel and
microcode which exposes e.g. the recent CPU bug mitigations, thus I
opted to keep the CPU changes rather than trying to do a franken-caps
by updating only the output of query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we call query-cpu-model-expansion will rely on some capabilities
bits. Let's make sure all capabilities are set before probing host CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We will use it to check whether QEMU supports a specific CPU property.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add two capabilities for testing features required for the upcoming
virDomainBackupBegin: use block-dirty-bitmap-merge as the generic
witness of bitmap support needed for checkpoints (since all of the
bitmap management functionalities were finalized in the same qemu 4.0
release), and the bitmap parameter to nbd-server-add for pull-mode
backup support. Even though both capabilities are likely to be
present or absent together (that is, it is unlikely to encounter a
qemu that backports only one of the two), it still makes sense to keep
two capabilities as the two uses are orthogonal (full backups don't
require checkpoints, push mode backups don't require NBD bitmap
support, and checkpoints can be used for more than just incremental
backups).
Existing code is not affected by the new capabilities.
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
This capability can be used to figure out whether the
QEMU binary at hand supports the machine type property
we need in order to enable SMMUv3 IOMMU support.
Unfortunately we can't avoid probing the RISC-V binaries
along with the ARM ones, since both architectures have
their own 'virt' machine type.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know the full list of machine types supported
by the QEMU binary when probing machine type properties,
we can save some work (and eventually test suite churn,
as more architecture-specific machine types need to be
probed) by only probing machines that we know exist.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we're probing machine type properties using the
latest machine type rather than the "spapr-machine" parent,
we can finally discover properties that are not available
on all machine types.
This commit refreshes replies for QEMU 4.0.0 as well as
3.1.0 to show not only that we're actually discovering new
machine type properties this way, but also that the number
of available machine type properties increases with each
subsequent QEMU release.
If qom-list-properties had been available in QEMU 2.10.0,
we could now drop the explicit version number checks for
the QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT and
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT capabilities, but
unfortunately it wasn't, so we have to keep them around
still.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have the list of machine types available when
probing machine type properties, we can list properties for
the canonicalized version of the "pseries" machine type
instead of having to go through "spapr-machine", which we
know to be the parent type for all "pseries-*-machine"
types. By doing this, we'll be able to find even properties
that are only available from a certain versioned machine
type forward, and can't thus be obtained when looking at
the parent type only.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We're going to need information about available machine types
when probing machine type properties soon, and that means we
have to change the order we call QMP commands.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In addition adjusting iothreads-virtio-scsi-ccw.s390x-latest.args to prevent
accidential drive id exposure by QEMU fixed by commit a1dce96236
(qemu: Use the 'device_id' property of SCSI disks to avoid regressing),
and also adjusting *s390x-latest.args files to qemu deprecation changes made
in commit e8c2c8bd07 (Prefer '-overcommit mem-lock' over -realtime mlock').
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Capture and update the 4.0.0 qemu version replies now that it was
released. I opted to keep the CPU differences as there was a qemu bug
which reported an empty string in CPU caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU commit 46ea94ca9cf ("qmp: query-current-machine with
wakeup-suspend-support") added a new QMP command called
'query-current-machine' that retrieves guest parameters that
can vary in the same machine model (e.g. ACPI support for x86 VMs
depends on the '--no-acpi' option). Currently, this API has a single
flag, 'wakeup-suspend-support', that indicates whether the guest has
the capability of waking up from suspended state.
Introduce a libvirt capability that reflects whether qemu has the
monitor command.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Added in QEMU commit of v3.0.0-rc0~48^2~9 (then fixed by
v3.1.0-rc0~119^2~37) QEMU is replacing '-realtime mlock' with
'-overcommit mem-lock'. Add a capability to tell if we're dealing
new new enough qemu to use the replacement.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The '-realtime mlock' cmd line argument was introduced in QEMU
commit v1.5.0-rc0~190 which matches minimal QEMU version we
require. Therefore, the capability will always be present.
Apparently, nearly none of our xml2argv test cases had the
capability hence slightly bigger change under qemuxml2argvdata/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There are a few differences, but the one we're interested in is
that PCIe Root Ports are finally available: as a result of this,
our riscv64-virt-headless guest will switch from virtio-mmio to
virtio-pci.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
'blockdev-snapshot-sync' is present in QEMU since v0.14.0-rc0 and
'transaction' since v1.1.0 (52e7c241ac766406f05fa)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'drive-mirror' command in v1.3.0 (d9b902db3fb71fdc)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu added the 'block-commit' command in v1.3.0 (ed61fc10e8c8d2)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This was detected by the presence of 'block-stream' which is present in
qemu since v1.1 (db58f9c0605fa151b8c4)
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a single QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL that
will be set if any of the following qemu devices are found:
virtio-blk-pci-transitional
virtio-blk-pci-non-transitional
virtio-net-pci-transitional
virtio-net-pci-non-transitional
vhost-scsi-pci-transitional
vhost-scsi-pci-non-transitional
virtio-rng-pci-transitional
virtio-rng-pci-non-transitional
virtio-9p-pci-transitional
virtio-9p-pci-non-transitional
virtio-balloon-pci-transitional
virtio-balloon-pci-non-transitional
vhost-vsock-pci-transitional
vhost-vsock-pci-non-transitional
virtio-input-host-pci-transitional
virtio-input-host-pci-non-transitional
virtio-scsi-pci-transitional
virtio-scsi-pci-non-transitional
virtio-serial-pci-transitional
virtio-serial-pci-non-transitional
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Since commit a7424faff QMP is always used.
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The property allows to control the guest-visible content of the vendor
specific designator of the 'Device Identification' page of a SCSI
device's VPD (vital product data).
QEMU was leaking the id string of -drive as the value if the 'serial' of
the disk was not specified. Switching to -blockdev would impose an ABI
change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Based on qemu commit 'v3.1.0-1445-ga61faa3d02'. Will allow checking
for the scsi 'device_id' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of ide-disk into the two separate devices was introduced by
qemu commit 1f56e32a7f4b3 released in qemu v0.15.
Note that when compared to the previous commit which made sure that no
disk related tests were touched, in this case it's not as careful.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The split of scsi-disk into the two separate devices was introduced by
qemu commit b443ae67 released in qemu v0.15.
All changes to test files are not really related to disk testing thanks
to previous refactors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit a4cda054e7 we are using 'ide-hd' and 'ide-cd' instead of
'ide-drive'. We also should probe capabilities for 'ide-hd' instead of
'ide-drive'. It is safe to do as 'ide-drive' is the common denominator
of both 'ide-hd' and 'ide-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Since commit 02e8d0cfdf we are using 'scsi-hd' and 'scsi-cd' instead of
'scsi-disk'. We also should probe capabilities for 'scsi-hd' instead of
'scsi-disk'. It is safe to do as 'scsi-disk' is the common denominator
of both 'scsi-hd' and 'scsi-cd' so all the properties were common.
For now the test data are modified by just changing the appropriate type
when probing for caps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
To avoid changes to the filled in microcode in case we change the caps
replies file for any reason make the number depend on the filename.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The next release of QEMU is going to be 4.0.0. A bit early, but
this adds capabilities data for x86_64 from current qemu git
15bede554162dda822cd762c689edb6fa32b6e3b
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This capability tracks if nvdimm has the unarmed attribute or not
for the nvdimm readonly xml attribute.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the pmem
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This capability tracks if memory-backend-file has the align
attribute or not.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Now that we have QAPI introspection of display types in QEMU upstream,
we can check whether the 'rendernode' option is supported with
egl-headless display type.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
