'virBufferFreeAndReset' does not free the top level structure itself.
Additionally we almost exclusively use stack'd buffers rather than
pointers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
dnsmasq documentation says that the *IPv4* prefix/network
address/broadcast address sent to dhcp clients will be automatically
determined by dnsmasq by looking at the interface it's listening on,
so the original libvirt code did not add a netmask to the dnsmasq
commandline (or later, the dnsmasq conf file).
For *IPv6* however, dnsmasq apparently cannot automatically determine
the prefix (functionally the same as a netmask), and it must be
explicitly provided in the conf file (as a part of the dhcp-range
option). So many years after IPv4 DHCP support had been added, when
IPv6 dhcp support was added the prefix was included at the end of the
dhcp-range setting, but only for IPv6.
A user had reported a bug on a host where one of the interfaces was a
superset of the libvirt network where dhcp is needed (e.g., the host's
ethernet is 10.0.0.20/8, and the libvirt network is 10.10.0.1/24). For
some reason dnsmasq was supplying the netmask for the /8 network to
clients requesting an address on the /24 interface.
This seems like a bug in dnsmasq, but even if/when it gets fixed
there, it looks like there is no harm in just always adding the
netmask to all IPv4 dhcp-range options similar to how prefix is added
to all IPv6 dhcp-range options.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This fixes a bug that has been present since the original version of
the function was pushed in commit 1ab80f3 on Nov. 26 2010 (by me). The
virSocketAddr::len was not being set.
Apparently until now we were always calling
virSocketAddrPrefixToNetmask with virSocketAddr object that was
already (coincidentally) initialized for the proper address family,
but the bug became apparent when trying to use it to fill in an
otherwise uninitialized object.
Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Most of the code base is fairly consistent about using the name
'uuidstr' when dealing with a formatted human-readable form, and
'uuid' when dealing with the smaller raw bytes form. Fix
snapshot_conf to comply, as well as reducing the scope of a human
string to only the error message that needs it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signal the udev thread the change of `priv->threadQuit` by using the
thread condition.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
If the udev thread is stopped, it must be ensured that the watch
handle is also removed from the main loop.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Currently, some arguments are called strcontent and strsrc, or
content and src or some other combination. This makes it
impossible to see at the first glance what argument is supposed
to represent 'expected' value and which one represents 'actual'
value. Rename the arguments to make it obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current naming makes it hard for me to see which holds the
expected value and which holds the actual value. Rename them to
make it obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to save a few lines of code, and also since it's hype
let's use VIR_AUTOFREE() for the two strings we allocate there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The iohelper is an internal program that's only supposed to
be called by libvirt, and whatever output it might produce
will ultimately be passed to virReportError() or similar.
Since we do not want strings passed to those functions to
contain newlines, we can simply not output them in the first
place.
This is what happens in pretty much all cases already, but
in a couple instances newlines have managed to slip in.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid. Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images). We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed. Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).
There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Although VIR_DOMAIN_DEF_FORMAT_INACTIVE and VIR_DOMAIN_XML_INACTIVE
happen to have the same value (1<<1), they come from different enums;
and it is nicer to reason about a 'flags' variable if all uses of
that variable are compared against the same enum type. Messed up in
commit 06f75ff2 (3.8.0).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.
Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag. Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).
In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
qemuProcessQMPStart starts a QEMU process and monitor connection that
can be used by multiple functions possibly for multiple QMP commands.
The QMP exchange to exit capabilities negotiation mode and enter command
mode can only be performed once after the monitor connection is
established.
Move responsibility for entering QMP command mode into the
qemuProcessQMP code so multiple functions can issue QMP commands in
arbitrary orders.
This also simplifies the functions using the connection provided by
qemuProcessQMPStart to issue QMP commands.
Test code now needs to call qemuMonitorSetCapabilities to send the
message to switch to command mode because the test code does not use the
qemuProcessQMP command that internally calls qemuMonitorSetCapabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Multiple QEMU processes for QMP commands can operate concurrently.
Use a unique directory under libDir for each QEMU process to avoid
pidfile and unix socket collision between processes.
The pid file name is changed from "capabilities.pidfile" to "qmp.pid"
because we no longer need to avoid a possible clash with a qemu domain
called "capabilities" now that the processes artifacts are stored in
their own unique temporary directories.
"Capabilities" was changed to "qmp" in the pid file name because these
processes are no longer specific to the capabilities usecase and are
more generic in terms of being used for any general purpose QMP message
exchanges with a QEMU process that is not associated with a domain.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Users qemuProcessQMP struct were always forced to call both
qemuProcessQMPStop and qemuProcessQMPFree when they are done with the
process. We can just call qemuProcessQMPStop from qemuProcessQMPFree and
let users call qemuProcessQMPFree only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuProcessQMPNew is one of the public functions used to create and
manage a QEMU process for QMP command exchanges outside of domain
operations.
Add descriptive comment block, debug statement and make source
consistent with the cleanup / VIR_STEAL_PTR format used elsewhere.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The monitor config data is removed from the qemuProcessQMP struct.
The monitor config data can be initialized immediately before call to
qemuMonitorOpen and does not need to be maintained after the call
because qemuMonitorOpen copies any strings it needs.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move code for setting paths and prepping file system from
qemuProcessQMPNew to qemuProcessQMPInit.
This keeps qemuProcessQMPNew limited to data structures and path
initialization is done in qemuProcessQMPInit.
The patch is a non-functional, cut / paste change, however goto is now
"cleanup" rather than "error".
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Store libDir path in the qemuProcessQMP struct in anticipation of moving
path construction code into qemuProcessQMPInit function.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All code related to QEMU monitor is moved from qemuProcessQMPNew and
qemuProcessQMPInit into qemuProcessQMPConnectMonitor.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is a replacement for qemuProcessQMPRun to make the name consistent
with qemuProcessStart. The original qemuProcessQMPRun function is
renamed as qemuProcessQMPLaunch and becomes one of the simpler functions
called from the main qemuProcessQMPStart entry point. The following
patches will move parts of the code in qemuProcessQMPLaunch to the other
functions (qemuProcessQMPInit and qemuProcessQMPConnectMonitor).
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Keep the pointer to QEMU stderr output in qemuProcessQMP struct instead
of requiring the caller to provide it (and free it).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Let's push the call to virQEMUCapsLogProbeFailure down the stack to
where the probing failure is detected.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While qemuProcessQMPRun and virQEMUCapsInitQMPMonitor* functions called
from virQEMUCapsInit ignore some errors, the caller of virQEMUCapsInit
would report an error unless usedQMP is true anyway. And since usedQMP
can only be true if the probing code really succeeded (i.e., no errors
were ignored), we can just simplify the logic by not ignoring the errors
in the first place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function contains two almost identical parts. Let's consolidate them
into a single helper function and call it twice.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In new process code, move from model where qemuProcessQMP struct can be
used to activate a series of Qemu processes to model where one
qemuProcessQMP struct is used for one and only one Qemu process.
By allowing only one process activation per qemuProcessQMP struct, the
struct can safely store process outputs like status and stderr, without
being overwritten, until qemuProcessQMPFree is called.
By doing this, process outputs like status and stderr can remain stored
in the qemuProcessQMP struct without being overwritten by subsequent
process activations.
The forceTCG parameter (use / don't use KVM) will be passed when the
qemuProcessQMP struct is initialized since the qemuProcessQMP struct
won't be reused.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsInitQMP now stops QEMU process in all execution paths,
before freeing the process structure.
The qemuProcessQMPStop function can be called multiple times without
problems... Won't attempt to stop processes and free resources multiple
times.
Follow the convention established in qemu_process of
1) alloc process structure
2) start process
3) use process
4) stop process
5) free process data structure
The process data structure persists after the process activation fails
or the process dies or is killed so stderr strings can be retrieved
until the process data structure is freed.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/qemuProcessQMPAbort/qemuProcessQMPStop/ applied to change function
name used to stop QEMU processes in process code moved from
qemu_capabilities.
No functionality change.
The new name, qemuProcessQMPStop, is consistent with the existing
function qemuProcessStop used to stop Domain processes.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
s/cmd/proc/ in process code imported from qemu_capabilities.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the const qualifier on non modified strings
(string only copied inside qemuProcessQMPNew)
so that const strings can be used directly in calls to
qemuProcessQMPNew in future patches.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU process code in qemu_capabilities.c is moved to qemu_process.c in
order to make the code usable outside the original capabilities use
cases.
The moved code activates and manages QEMU processes without establishing
a guest domain.
This patch is a straight cut/paste move between files.
Signed-off-by: Chris Venteicher <cventeic@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function must return a pointer, not a boolean. Fortunately 'false'
is equivalent to 'NULL' so this bug no had ill effect previously.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Only one of the three callers of virPCIDeviceAddressFormat correctly
handles an error return status. Fortunately it can't fail so can be
made void.
Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The newline was pretty arbitrary, and we're better off
without it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The memory allocated by VIR_REALLOC_N() is uninitialized,
which means it's not possible to figure out whether any
output was produced at all after the fact.
Since we don't care about the previous contents of buffers,
if any, use VIR_FREE() followed by VIR_ALLOC_N() instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Remove unused variable. Fix for [1]
[1] 821dd6d8: storage: Use VIR_AUTOFREE for storage backends
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We dropped support in commit 8e91a40 (November 2015), but some
occurrences still remained, even in live code.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that virStorageSource is a subclass of virObject we can use
virObjectUnref and remove virStorageSourceFree which was a thin wrapper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since virStorageSource is now a subclass of virObject, we can use
VIR_AUTOUNREF instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add helper for utilizing __attribute__(cleanup())) for unref-ing
instances of sublasses of virObject.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
To allow tracking a single virStorageSource in multiple structures
without extra hassle allow refcounting by turining it into an object.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add virStorageSourceNew and refactor places allocating that structure to
use the helper.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Use the proper function to allocate a disk definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we've moved all the actual code into helper
functions, we can turn it into a switch statement.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Minor tweaks to ensure compliance with our coding style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
