systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.
This falls back to the old CreateMachine method when the new
one is not supported.
Add disk and spice config tests for the xen_xl config parser
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
There's this function virNetDevBandwidthParse which parses the
bandwidth XML snippet. But it's not clever much. For the
following XML it allocates the virNetDevBandwidth structure even
though it's completely empty:
<bandwidth>
</bandwidth>
Later in the code there are some places where we check if
bandwidth was set or not. And since we obtained pointer from the
parsing function we think that it is when in fact it isn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
The virCPUDefFormat* methods were relying on the VIR_DOMAIN_XML_*
flag definitions. It is not desirable for low level internal
functions to be coupled to flags for the public API, since they
may need to be called from several different contexts where the
flags would not be appropriate.
QEMU supports feature specification with -cpu host and we just skip
using that. Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Well, apparently it's possible for a patch to sneak in through
review process and break 'make check'. It happened just lately
with 0e502466ac which changed the default of vgamem_mb for
qxl device. However, there were left some domain XMLs within our
test suite relying on the old default. These should be updated to
match the change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VMware ESX does not always set the "serialX.fileType" tag in VMX files. The
default value for this tag is "device", and when adding a new serial port
of this type VMware will omit the fileType tag. This caused libvirt to
fail to parse the VMX file. Fixed by making this tag optional and using
"device" as a default value. Also updated vmx2xmltest to test for this
case.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make use of the ebtables functionality to be able to filter certain
parameters of icmpv6 packets. Extend the XML parser for icmpv6 types,
type ranges, codes, and code ranges. Extend the nwfilter documentation,
schema, and test cases.
Being able to filter icmpv6 types and codes helps extending the DHCP
snooper for IPv6 and filtering at least some parameters of IPv6's NDP
(Neighbor Discovery Protocol) packets. However, the filtering will not
be as good as the filtering of ARP packets since we cannot
check on IP addresses in the payload of the NDP packets.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Add tests to testing HVM default features (pae, acpi, apic)
conversion from xm config to libvirt xml. If no pae|acpi|apic
specified in xm config, after conversion, libvirt xml should
by default include:
<features>
<pae/>
<apic/>
<acpi/>
</features>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
The <domain/> element under /capabilities/guest/arch/ can have no
child elements. If that's the case we format:
<domain type='xen'>
</domain>
instead of simpler:
<domain type='xen'/>
This commit fixes that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are two more places after commit 3865941b that need to be adapted
in order to get rid of some test failures when building as root.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some of the nwfilter tests are now failing since --concurrent shows
up in the ebtables command. To avoid this, implement a function
preventing the probing for lock support in the eb/iptables tools
and use it in the tests.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Libvirt BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1175397
QEMU BZ: https://bugzilla.redhat.com/show_bug.cgi?id=1170093
In qemu there are two interesting arguments:
1) -numa to create a guest NUMA node
2) -object memory-backend-{ram,file} to tell qemu which memory
region on which host's NUMA node it should allocate the guest
memory from.
Combining these two together we can instruct qemu to create a
guest NUMA node that is tied to a host NUMA node. And it works
just fine. However, depending on machine type used, there might
be some issued during migration when OVMF is enabled (see QEMU
BZ). While this truly is a QEMU bug, we can help avoiding it. The
problem lies within the memory backend objects somewhere. Having
said that, fix on our side consists on putting those objects on
the command line if and only if needed. For instance, while
previously we would construct this (in all ways correct) command
line:
-object memory-backend-ram,size=256M,id=ram-node0 \
-numa node,nodeid=0,cpus=0,memdev=ram-node0
now we create just:
-numa node,nodeid=0,cpus=0,mem=256
because the backend object is obviously not tied to any specific
host NUMA node.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Volume and pool formatting functions took different approaches to
unspecified uids/gids. When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better). Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.
RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1173507
It occurred to me that OpenStack uses the following XML when not using
regular huge pages:
<memoryBacking>
<hugepages>
<page size='4' unit='KiB'/>
</hugepages>
</memoryBacking>
However, since we are expecting to see huge pages only, we fail to
startup the domain with following error:
libvirtError: internal error: Unable to find any usable hugetlbfs
mount for 4 KiB
While regular system pages are not huge pages technically, our code is
prepared for that and if it helps OpenStack (or other management
applications) we should cope with that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
If probing capabilities via QMP fails, we now have a check
that prevents us falling back to -help parsing. Unfortunately
the error message
"Failed to probe capabilities for /usr/bin/qemu-kvm:
unsupported configuration: QEMU 2.1.2 is too new for help parsing"
is proving rather unhelpful to the user. We need to be telling
them why QMP failed (the root cause), rather than they can't
use -help (the side effect).
To do this we should capture stderr during QMP probing, and
if -help parsing then sees a new QEMU version, we know that
QMP should have worked, and so we can show the messages from
stderr. The message thus becomes
"Failed to probe capabilities for /usr/bin/qemu-kvm:
internal error: QEMU / QMP failed: Could not access
KVM kernel module: No such file or directory
failed to initialize KVM: No such file or directory"
When trying clang, it found out that we were comparing sizeof with 0
even though we wanted to check the return value of memcmp. That showed
us that the test was wrong and it needs a fix as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
It looks like it was copy-pasted, so in case anyone wonders what some of
those methods do without looking at them, and for the sake of
completeness, fix them.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Commit 2aa167ca tried to fix the DBus interaction code to allow
callers to use native types instead of 4-byte bools. But in
fixing the issue, I missed the case of an arrayref; Conrad Meyer
shows the following valid complaint issued by clang:
CC util/libvirt_util_la-virdbus.lo
util/virdbus.c:956:13: error: cast from 'bool *' to 'dbus_bool_t *' (aka 'unsigned int *') increases required alignment from 1 to 4 [-Werror,-Wcast-align]
GET_NEXT_VAL(dbus_bool_t, bool_val, bool, "%d");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
util/virdbus.c:858:17: note: expanded from macro 'GET_NEXT_VAL'
x = (dbustype *)(*xptrptr + (*narrayptr - 1)); \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated.
But fixing that points out that we have NEVER supported arrayrefs
of sub-int types (byte, i16, u16, and now bool). Again, while raw
types promote, arrays do not; so the macros HAVE to deal with both
size possibilities rather than assuming that an arrayref uses the
same sizing as the promoted raw type.
Obviously, our testsuite wasn't covering as much as it should have.
* src/util/virdbus.c (GET_NEXT_VAL): Also fix array cases.
(SET_NEXT_VAL): Fix uses of sub-int arrays.
* tests/virdbustest.c (testMessageArray, testMessageArrayRef):
Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.
To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.
For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
QEMU has two different type of QXL display device. The first "qxl-vga"
is for primary video device and second "qxl" is for secondary video
device.
There are also two different ways how to specify those devices on qemu
command line, the first one and obsolete is using "-vga" option and the
current new one is using "-device" option. The "-vga" could be used only
to setup primary video device, so the "-vga qxl" equal to
"-device qxl-vga". Unfortunately the "-vga qxl" doesn't support setting
additional parameters for the device and "-global" option must be used
for this purpose. It's mandatory to use "-global qxl-vga...." to set the
parameters of primary video device previously defined with "-vga qxl".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The vram attribute was introduced to set the video memory but it is
usable only for few hypervisors excluding QEMU/KVM and the old XEN
driver. Only in case of QEMU the vram was used for QXL.
This patch updates the documentation to reflect current code in libvirt
and also changes the cases when we will set the default vram attribute.
It also fixes existing strange default value for VGA devices 9MB to 16MB
because the video ram should be rounded to power of two.
The change of default value could affect migrations but I found out that
QEMU always round the video ram to power of two internally so it's safe
to change the default value to the next closest power of two and also
silently correct every domain XML definition. And it's also safe because
we don't pass the value to QEMU.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There are two special cases, if the input number is 0 or the number is
larger then 2^31 (for 32bit unsigned int). For the special cases the
return value is 0 because they cannot be rounded.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add test cases for qemuAgentGetFSInfo, with a sample agent response for
the qemu-get-fsinfo command and a configuration xml.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Improve the monitor function to also retrieve the guest state of
character device (if provided) so that we can refresh the state of
virtio-serial channels and perhaps react to changes in the state in
future patches.
This patch changes the returned data from qemuMonitorGetChardevInfo to
return a structure containing the pty path and the state for all the
character devices.
The change to the testsuite makes sure that the data is parsed
correctly.
To be able to express some use cases of the RBD backing with libvirt, we
need to be able to specify a config file for the RBD client to qemu as
that is one of the commonly used options.
Some storage systems have internal support for snapshots. Libvirt should
be able to select a correct snapshot when starting a VM.
This patch adds a XML element to select a storage source snapshot for
the RBD protocol which supports this feature.
As we now have a common function to parse backing store string for RBD
backing store we can reuse it in the backing store walker so that we
don't fail on files backed by RBD storage.
This patch also adds a few tests to verify that the parsing works as
expected.
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.
This will be later populated with the guest state of the channel.
To unify future additions that require information from "query-chardev"
rename qemuMonitorGetPtyPaths and friends to qemuMonitorGetChardevInfo
and move the allocation of the returned hash into the top level
function.
To simplify looking for a problem instrument the XML comparator function
with possibility to print the filename of the failed/expected XML
output.
This is necessary as the VIR_TEST_DIFFERENT macro possibly tests two XML
files for the inactive/active state and the resulting error may not be
obvious.
Use of an 'int' to represent a 'bool' value is confusing. Just
because dbus made the mistake of cementing their 4-byte wire
format of dbus_bool_t into their API doesn't mean we have to
repeat the mistake. With a little bit of finesse, we can
guarantee that we provide a large-enough value to the DBus
code, while still copying only the relevant one-byte bool
to the client code, and isolate the rest of our code base from
the DBus stupidity.
* src/util/virdbus.c (GET_NEXT_VAL): Add parameter.
(virDBusMessageIterDecode): Adjust all clients.
* src/util/virpolkit.c (virPolkitCheckAuth): Use nicer type.
* tests/virdbustest.c (testMessageSimple, testMessageStruct):
Test new behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
The recent commit to add support for block_set_io_throttle parameters
from version 1.7 of qemu did not add any tests - this adds the tests
Signed-off-by: John Ferlan <jferlan@redhat.com>
Since QEMU 1.2.0, we switched to QMP probing instead of parsing -help
(and other commands, such as -cpu ?) output. However, if QMP probing
failed, we still tried starting QEMU with various options and parsing
the output, which was guaranteed to fail because the output changed.
Let's just refuse parsing -help for QEMU >= 1.2.0.
https://bugzilla.redhat.com/show_bug.cgi?id=1160318
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We used to set migration capabilities only when a user asked for them in
flags. This is fine when migration succeeds since the QEMU process is
killed in the end but in case migration fails or if it's cancelled, some
capabilities may remain turned on with no way to turn them off. To fix
that, migration capabilities have to be turned on if requested but
explicitly turned off in case they were not requested but QEMU supports
them.
https://bugzilla.redhat.com/show_bug.cgi?id=1163953
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than just picking the first CD (or failing that, HDD) we come
across, if the user has picked a boot device ordering with <boot
order=''>, respect that (and just try to boot the lowest-index device).
Adds two sets of tests to bhyve2xmlargv; 'grub-bootorder' shows that we
pick a user-specified device over the first device in the domain;
'grub-bootorder2' shows that we pick the first (lowest index) device.
As I was reviewing bhyve commits, I've noticed qemuxml2argvtest
failing for some test cases. This is not bug in qemu driver code
rather than being unable to load qemuxml2argvmock on non-Linux
platforms. For instance:
318) QEMU XML-2-ARGV numatune-memnode
... libvirt: error : internal error: NUMA node 0 is unavailable
FAILED
Rather than disabling qemuxml2argvtest on BSD (we do compile qemu
driver there) disable only those test cases which require mocking.
To achieve that goal new DO_TEST_LINUX() macro is introduced which
invokes the test case on Linux only and consume arguments on other
systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160926
Introduce a 'managed' attribute to allow libvirt to decide whether to
delete a vHBA vport created via external means such as nodedev-create.
The code currently decides whether to delete the vHBA based solely on
whether the parent was provided at creation time. However, that may not
be the desired action, so rather than delete and force someone to create
another vHBA via an additional nodedev-create allow the configuration of
the storage pool to decide the desired action.
During createVport when libvirt does the VPORT_CREATE, set the managed
value to YES if not already set to indicate to the deleteVport code that
it should delete the vHBA when the pool is destroyed.
If libvirtd is restarted all the memory only state was lost, so for a
persistent storage pool, use the virStoragePoolSaveConfig in order to
write out the managed value.
Because we're now saving the current configuration, we need to be sure
to not save the parent in the output XML if it was undefined at start.
Saving the name would cause future starts to always use the same parent
which is not the expected result when not providing a parent. By not
providing a parent, libvirt is expected to find the best available
vHBA port for each subsequent (re)start.
At deleteVport, use the new managed value to decide whether to execute
the VPORT_DELETE. Since we no longer save the parent in memory or in
XML when provided, if it was not provided, then we have to look it up.
Add support for bps_max and friends in the driver part.
In the part checking if a qemu is running, check if the running binary
support bps_max, if not print an error message, if yes add it to
"info" variable
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the capability to detect if the qemu binary have the capability
to use bps_max and friends
Add a value in the enum virQEMUCapsFlags for the qemu capability.
Set it with virQEMUCapsSet if the binary suport bps_max and they friends.
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
Modify the structure _virDomainBlockIoTuneInfo to support these the new
options.
Change the initialization of the variable expectedInfo in qemumonitorjsontest.c
to avoid compiling problem.
Add documentation about the new xml options
Signed-off-by: Matthias Gatto <matthias.gatto@outscale.com>
CPU numa topology implicitly allows memory specification in 'KiB'.
Enabling this to accept the 'unit' in which memory needs to be specified.
This now allows users to specify memory in units of choice, and
lists the same in 'KiB' -- just like other 'memory' elements in XML.
<numa>
<cell cpus='0-3' memory='1024' unit='MiB' />
<cell cpus='4-7' memory='1024' unit='MiB' />
</numa>
Also augment test cases to correctly model NUMA memory specification.
This adds the tag 'unit="KiB"' for memory attribute in NUMA cells.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This introduces a testcase for PowerPC compat mode cpu specification.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extending the iothread disk support from pci to pci and ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around. This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.
The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.
Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c8515620) that doesn't support
non-contiguous nodesets. It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.
[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Patch 43b67f2e disallowed network tuning only with qemu driver, however
this patch moved the check for root privileges into
virNetDevBandwidthSet function, so the call should now
fail in all possible cases. A mock function was created so that the test
suite doesn't fail because of unsufficient privileges.
There was no check for 'nodeset' attribute in numatune-related
elements. This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to. With newer qemu this caused the following error when starting
domain:
error: internal error: Advice from numad is needed in case of
automatic numa placement
even when starting perfectly valid domain, e.g.:
...
<vcpu placement='auto'>4</vcpu>
<numatune>
<memory mode='strict' placement='auto'/>
</numatune>
<cpu>
<numa>
<cell id='0' cpus='0' memory='524288'/>
<cell id='1' cpus='1' memory='524288'/>
</numa>
</cpu>
...
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The code that parses the schema from the URI touches the "hosts[0]"
member of the storage file source structure in case the URI contains a
schema. The hosts array was not yet allocated at the point in the code
where the transport protocol was parsed and set. This lead to a crash of
libvirtd.
Fix the code by allocating the "hosts" array upfront and add a test case
to verify this scenario. (Unfortunately this requires shuffling the test
case numbers too).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1156288
C guarantees that static variables are zero-initialized. Some older
compilers (and also gcc -fno-zero-initialized-in-bss) create larger
binaries if you explicitly zero-initialize a static variable.
* tests/eventtest.c: Fix initialization.
* tests/testutils.c: Likewise.
* tests/virhostdevtest.c: Likewise.
* tests/virportallocatortest.c: Likewise.
* tests/virscsitest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In a clean build system (Ubuntu 14.04), the viridentitytest failed to compile.
Even if all the SELINUX libraries and depedencies are installed. See the error
message below:
[...]
CC viridentitytest.o
CCLD viridentitytest
/usr/bin/ld: viridentitytest.o: undefined reference to symbol
'security_disable'
//lib/x86_64-linux-gnu/libselinux.so.1: error adding symbols: DSO missing
from command line
collect2: error: ld returned 1 exit status
make: *** [viridentitytest] Error 1
Simply adding the variable SELINUX_LIBS in viridentitytest rules of
Makefile.am to include SELINUX libraries into viridentitytest solved that
compilation issue.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
VIR_TEST_DEBUG=2 ./qemuxml2argvtest generates the following output:
409) QEMU XML-2-ARGV shmem-invalid-size
... Got expected error: unsupported configuration: ivshmem device is not \
supported with this QEMU binary
OK
410) QEMU XML-2-ARGV shmem-small-size
... Got expected error: unsupported configuration: ivshmem device is not \
supported with this QEMU binary
OK
We should have:
409) QEMU XML-2-ARGV shmem-invalid-size
... Got expected error: XML error: shmem size must be a power of two
OK
410) QEMU XML-2-ARGV shmem-small-size
... Got expected error: XML error: shmem size must be at least 1 MiB
OK
This commit fixes the issue by providing QEMU_CAPS_DEVICE_IVSHMEM caps
for shmem-invalid-size, shmem-small-size test.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
The mode attribute is required for the source element of vhost-user.
Thus virDomainNetDefFormat should always generate a xml with it and not
only when the mode is server.
The commit fixes the issue. And it adds a vhostuser interface in
'client' mode to qemuxml2argv-net-vhostuser.(args|xml) to test this
usecase.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
tcp:2001:0DB8::1428:4444,
but the correct address should be:
tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
This function can be called at any time to get the current status of a
guest's network device rx-filter. In particular it is useful to call
after libvirt recieves a NIC_RX_FILTER_CHANGED event - this event only
tells you that something has changed in the rx-filter, the details are
retrieved with the query-rx-filter monitor command (only available in
the json monitor). The command sent to the qemu monitor looks like this:
{"execute":"query-rx-filter", "arguments": {"name":"net2"} }'
and the results will look something like this:
{
"return": [
{
"promiscuous": false,
"name": "net2",
"main-mac": "52:54:00:98:2d:e3",
"unicast": "normal",
"vlan": "normal",
"vlan-table": [
42,
0
],
"unicast-table": [
],
"multicast": "normal",
"multicast-overflow": false,
"unicast-overflow": false,
"multicast-table": [
"33:33:ff:98:2d:e3",
"01:80:c2:00:00:21",
"01:00:5e:00:00:fb",
"33:33:ff:98:2d:e2",
"01:00:5e:00:00:01",
"33:33:00:00:00:01"
],
"broadcast-allowed": false
}
],
"id": "libvirt-14"
}
This is all parsed from JSON into a virNetDevRxFilter object for
easier consumption. (unicast-table is usually empty, but is also an
array of mac addresses similar to multicast-table).
(NB: LIBNL_CFLAGS was added to tests/Makefile.am because virnetdev.h
now includes util/virnetlink.h, which includes netlink/msg.h when
appropriate. Without LIBNL_CFLAGS, gcc can't find that file (if
libnl/netlink isn't available, LIBNL_CFLAGS will be empty and
virnetlink.h won't try to include netlink/msg.h anyway).)
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.
The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
This patch implements support for the ivshmem device in QEMU.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Ivshmem is supported by QEMU since 0.13 release.
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds parsing/formatting code as well as documentation for
shared memory devices. This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.
In the devices section in the domain XML users may specify:
- For shmem device using a server:
<shmem name='shmem0'>
<server path='/tmp/socket-ivshmem0'/>
<size unit='M'>32</size>
<msi vectors='32' ioeventfd='on'/>
</shmem>
- For ivshmem device not using an ivshmem server:
<shmem name='shmem1'>
<size unit='M'>32</size>
</shmem>
Most of the configuration is made optional so it also allows
specifications like:
<shmem name='shmem1/>
<shmem name='shmem2'>
<server/>
</shmem>
Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Right now when building the qemu command line, we try to do various
unconditional validations of the guest CPU against the host CPU. However
this checks are overly applied. The only time we should use the checks
are:
- The user requests host-model/host-passthrough, or
- When KVM is requsted. CPU features requested in TCG mode are always
emulated by qemu and are independent of the host CPU, so no host CPU
checks should be performed.
Right now if trying to specify a CPU for arm on an x86 host, it attempts
to do non-sensical validation and falls over.
Switch all the test cases that were intending to test CPU validation to
use KVM, so they continue to test the intended code.
Amend some aarch64 XML tests with a CPU model, to ensure things work
correctly.
Spawning the pkcheck program every time a permission check is
required is hugely expensive on CPU. The pkcheck program is just
a dumb wrapper for the DBus API, so rewrite the code to use the
DBus API directly. This also simplifies error handling a bit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add options for tuning segment offloading:
<driver>
<host csum='off' gso='off' tso4='off' tso6='off'
ecn='off' ufo='off'/>
<guest csum='off' tso4='off' tso6='off' ecn='off' ufo='off'/>
</driver>
which control the respective host_ and guest_ properties
of the virtio-net device.
Add a new parameter to virStorageFileGetMetadata that will break the
backing chain detection process and report useful error message rather
than having to use virStorageFileChainGetBroken.
This patch just introduces the option, usage will be provided
separately.
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.
This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
- Provide an implementation for buildPool and deletePool operations
for the ZFS storage backend.
- Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
as now we can specify devices to build pool from
- storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
add an optional 'target' to 'poolzfs' entity
- Add a couple of tests to storagepoolxml2xmltest
